kevin/linux
1
Fork 0
Code
adc218676e
linux/arch/loongarch/configs/loongson3_defconfig

986 lines
23 KiB
Plaintext
Raw Normal View History

LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BPF_SYSCALL=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_BPF_JIT=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PREEMPT=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_PSI=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_LOG_BUF_SHIFT=18
CONFIG_NUMA_BALANCING=y
CONFIG_MEMCG=y
CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_CGROUP_RDMA=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_CGROUP_MISC=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_KALLSYMS_ALL=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PERF_EVENTS=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_LOONGARCH=y
CONFIG_64BIT=y
CONFIG_MACH_LOONGSON64=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_PAGE_SIZE_16KB=y
CONFIG_HZ_250=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_NR_CPUS=256
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NUMA=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_LSX=y
CONFIG_CPU_HAS_LASX=y
CONFIG_RANDOMIZE_BASE=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_SUSPEND=y
CONFIG_HIBERNATION=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ACPI=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_TAD=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_IPMI=m
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_ACPI_HOTPLUG_CPU=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
LoongArch: KVM: Enable kvm config and add the makefile Enable LoongArch kvm config and add the makefile to support build kvm module. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Tested-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-10-01 19:01:29 -07:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_JUMP_LABEL=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_BLK_DEV_ZONED=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BLK_DEV_THROTTLING=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_BLK_WBT=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PARTITION_ADVANCED=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_BSD_DISKLABEL=y
CONFIG_UNIXWARE_DISKLABEL=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_CMDLINE_PARTITION=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BINFMT_MISC=m
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_ZPOOL=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ZSWAP=y
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=m
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
# CONFIG_COMPAT_BRK is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_CMA=y
CONFIG_CMA_SYSFS=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_USERFAULTFD=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_XDP_SOCKETS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_NET_IPGRE_DEMUX=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IP_MROUTE=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_INET_AH=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_INET_ESP=m
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BBR=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_INET6_AH=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_INET6_ESP=m
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MULTIPLE_TABLES=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IPV6_MROUTE=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_MPTCP=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_TABLES=m
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_NF_TABLES_INET=y
CONFIG_NFT_CT=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_NFT_FIB_INET=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IP_VS_RR=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_IP_VS_WRR=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IP_VS_NFCT=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_TABLES_IPV6=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_NFT_FIB_IPV6=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_NF_CONNTRACK_BRIDGE=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_IP_SCTP=m
CONFIG_RDS=y
CONFIG_L2TP=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_LLC2=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_BPF=m
CONFIG_OPENVSWITCH=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NETLINK_DIAG=y
CONFIG_CGROUP_NET_PRIO=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_BPF_STREAM_PARSER=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BT=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BT_HCIBTUSB=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_ATH3K=m
CONFIG_BT_VIRTIO=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CFG80211=m
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_NET_9P_VIRTIO=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CEPH_LIB=m
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_PCI_IOV=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_SHPC=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_PCI_HOST_GENERIC=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PCCARD=m
CONFIG_YENTA=m
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
CONFIG_UEVENT_HELPER=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_EFI_ZBOOT=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EFI_TEST=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_MTD=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_BLOCK=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_ZSTD=y
CONFIG_BLK_DEV_LOOP=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_BLK_DEV_DRBD=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_VIRTIO_BLK=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_NVME=y
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_TCP=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_EEPROM_AT24=m
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_SCSI_VIRTIO=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_AHCI_DWC=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_PCMCIA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_BCACHE=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=y
CONFIG_WIREGUARD=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=y
CONFIG_RIONET=m
CONFIG_TUN=m
CONFIG_VETH=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_VIRTIO_NET=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_BNX2=y
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IXGBE=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
# CONFIG_NET_VENDOR_BROCADE is not set
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
# CONFIG_NET_VENDOR_SOLARFLARE is not set
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_NGBE=y
CONFIG_TXGBE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_MOTORCOMM_PHY=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_PPTP=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_ATH9K=m
CONFIG_ATH9K_HTC=m
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_HOSTAP=m
CONFIG_MT7601U=m
CONFIG_RT2X00=m
CONFIG_RT2800USB=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8XXXU=m
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_RTW88=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW89=m
CONFIG_RTW89_8852AE=m
CONFIG_RTW89_8852CE=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ZD1211RW=m
CONFIG_USB_NET_RNDIS_WLAN=m
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_USB4_NET=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_RAW=m
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=16
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_RSA=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_SERIAL_OF_PLATFORM=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_PRINTER=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_VIRTIO_CONSOLE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_HW_RANDOM=y
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_HW_RANDOM_VIRTIO=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_GPIO=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_I2C_LS2X=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_SPI=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_SPI_LOONGSON_PCI=m
CONFIG_SPI_LOONGSON_PLATFORM=m
CONFIG_PINCTRL=y
CONFIG_PINCTRL_LOONGSON2=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_LOONGSON=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_GPIO_LOONGSON_64BIT=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_SYSCON_REBOOT_MODE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83627HF=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_LOONGSON2_THERMAL=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_IR_SONY_DECODER=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_IR_XMP_DECODER=m
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_MEDIA_PCI_SUPPORT=y
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_DRM=y
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_AST=y
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_DRM_LOONGSON=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_FB=y
CONFIG_FB_EFI=y
CONFIG_FB_RADEON=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_LCD_CLASS_DEVICE=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_LCD_PLATFORM=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_USB_AUDIO=m
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_SND_SOC=m
CONFIG_SND_SOC_LOONGSON_CARD=m
CONFIG_SND_VIRTIO=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_A4TECH=m
CONFIG_HID_CHERRY=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_SUNPLUS=m
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_MON=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_UAS=m
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_GADGET=y
LoongArch: Update Loongson-3 default config file 1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12 01:36:23 -07:00
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_ACPI=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_INFINIBAND=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_RTC_DRV_LOONGSON=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_DMADEVICES=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_LS2X_APB_DMA=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_UIO=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_PCI_GENERIC=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_COMEDI=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7X3X=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1720=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI1760=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_NI_LABPC_PCI=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_STAGING=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_COMMON_CLK_LOONGSON2=y
CONFIG_LOONGSON2_GUTS=y
CONFIG_LOONGSON2_PM=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PM_DEVFREQ=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_NTB=m
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=m
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PWM=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_GENERIC_PHY=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_USB4=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_BTRFS_FS=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_BTRFS_FS_POSIX_ACL=y
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_F2FS_FS=m
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FS_COMPRESSION=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs") promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS within a couple of releases, but five years later this still has not happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs. Get rid of it mechanically: git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' | xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/' Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't regenerated their config file in the last five years will need to just get the new name right when they do. Signed-off-by: Sven Joachim <svenjoac@gmx.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-27 13:00:41 -07:00
CONFIG_AUTOFS_FS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_FUSE_FS=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
CONFIG_FSCACHE=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_CACHEFILES=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=936
CONFIG_FAT_DEFAULT_IOCHARSET="gb2312"
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_EXFAT_FS=m
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_64BIT_CLUSTER=y
CONFIG_NTFS3_LZX_XPRESS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_CONFIGFS_FS=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_ORANGEFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_SQUASHFS_ZSTD=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_PSTORE=m
CONFIG_PSTORE_LZO_COMPRESS=m
CONFIG_PSTORE_LZ4_COMPRESS=m
CONFIG_PSTORE_LZ4HC_COMPRESS=m
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_EROFS_FS=m
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_PCPU_KTHREAD=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_BLOCKLAYOUT=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CIFS=m
# CONFIG_CIFS_DEBUG is not set
CONFIG_9P_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_UTF8=y
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_DLM=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_YAMA=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
LoongArch: Update Loongson-3 default config file 1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 21:06:20 -07:00
CONFIG_CRYPTO_CRC32_LOONGARCH=m
LoongArch: Update Loongson-3 default config file 1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-09 23:22:39 -07:00
CONFIG_CRYPTO_DEV_VIRTIO=m
LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-16 21:43:13 -07:00
CONFIG_DMA_CMA=y
CONFIG_DMA_NUMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
CONFIG_PRINTK_TIME=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_MAGIC_SYSRQ=y
LoongArch: Update Loongson-3 default config file 1, Enable suspend (ACPI S3) and hibernation (ACPI S4). 2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM). 3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace. 4, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-10 07:40:21 -07:00
CONFIG_DEBUG_FS=y
LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-05-31 03:04:12 -07:00
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
LoongArch: Update Loongson-3 default config file 1, Enable PSI tracking. 2, Enable IKCONFIG/IKHEADERS. 3, Enable Generic PHY driver. 4, Enable Motorcomm PHY driver. 5, Enable ORC stack unwinder. 6, Enable some squashfs options. 7, Enable some netfilter options. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-05-19 07:18:56 -07:00
CONFIG_UNWINDER_ORC=y
Copy Permalink