1
linux/drivers/char/mem.c

1003 lines
21 KiB
C
Raw Normal View History

/*
* linux/drivers/char/mem.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Added devfs support.
* Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
* Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
*/
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mman.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/raw.h>
#include <linux/tty.h>
#include <linux/capability.h>
#include <linux/ptrace.h>
#include <linux/device.h>
#include <linux/highmem.h>
#include <linux/crash_dump.h>
#include <linux/backing-dev.h>
#include <linux/bootmem.h>
#include <linux/splice.h>
#include <linux/pfn.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#ifdef CONFIG_IA64
# include <linux/efi.h>
#endif
/*
* Architectures vary in how they handle caching for addresses
* outside of main memory.
*
*/
static inline int uncached_access(struct file *file, unsigned long addr)
{
#if defined(CONFIG_IA64)
/*
* On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases.
*/
return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
#elif defined(CONFIG_MIPS)
{
extern int __uncached_access(struct file *file,
unsigned long addr);
return __uncached_access(file, addr);
}
#else
/*
* Accessing memory above the top the kernel knows about or through a file pointer
* that was marked O_SYNC will be done non-cached.
*/
if (file->f_flags & O_SYNC)
return 1;
return addr >= __pa(high_memory);
#endif
}
#ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
static inline int valid_phys_addr_range(unsigned long addr, size_t count)
{
if (addr + count > __pa(high_memory))
return 0;
return 1;
}
static inline int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
{
return 1;
}
#endif
#ifdef CONFIG_STRICT_DEVMEM
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
u64 from = ((u64)pfn) << PAGE_SHIFT;
u64 to = from + size;
u64 cursor = from;
while (cursor < to) {
if (!devmem_is_allowed(pfn)) {
printk(KERN_INFO
"Program %s tried to access /dev/mem between %Lx->%Lx.\n",
current->comm, from, to);
return 0;
}
cursor += PAGE_SIZE;
pfn++;
}
return 1;
}
#else
static inline int range_is_allowed(unsigned long pfn, unsigned long size)
{
return 1;
}
#endif
void __attribute__((weak)) unxlate_dev_mem_ptr(unsigned long phys, void *addr)
{
}
/*
* This funcion reads the *physical* memory. The f_pos points directly to the
* memory location.
*/
static ssize_t read_mem(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
ssize_t read, sz;
char *ptr;
if (!valid_phys_addr_range(p, count))
return -EFAULT;
read = 0;
#ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
/* we don't have page 0 mapped on sparc and m68k.. */
if (p < PAGE_SIZE) {
sz = PAGE_SIZE - p;
if (sz > count)
sz = count;
if (sz > 0) {
if (clear_user(buf, sz))
return -EFAULT;
buf += sz;
p += sz;
count -= sz;
read += sz;
}
}
#endif
while (count > 0) {
/*
* Handle first page in case it's not aligned
*/
if (-p & (PAGE_SIZE - 1))
sz = -p & (PAGE_SIZE - 1);
else
sz = PAGE_SIZE;
sz = min_t(unsigned long, sz, count);
if (!range_is_allowed(p >> PAGE_SHIFT, count))
return -EPERM;
/*
* On ia64 if a page has been mapped somewhere as
* uncached, then it must also be accessed uncached
* by the kernel or data corruption may occur
*/
ptr = xlate_dev_mem_ptr(p);
if (!ptr)
return -EFAULT;
if (copy_to_user(buf, ptr, sz)) {
unxlate_dev_mem_ptr(p, ptr);
return -EFAULT;
}
unxlate_dev_mem_ptr(p, ptr);
buf += sz;
p += sz;
count -= sz;
read += sz;
}
*ppos += read;
return read;
}
static ssize_t write_mem(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
ssize_t written, sz;
unsigned long copied;
void *ptr;
if (!valid_phys_addr_range(p, count))
return -EFAULT;
written = 0;
#ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
/* we don't have page 0 mapped on sparc and m68k.. */
if (p < PAGE_SIZE) {
unsigned long sz = PAGE_SIZE - p;
if (sz > count)
sz = count;
/* Hmm. Do something? */
buf += sz;
p += sz;
count -= sz;
written += sz;
}
#endif
while (count > 0) {
/*
* Handle first page in case it's not aligned
*/
if (-p & (PAGE_SIZE - 1))
sz = -p & (PAGE_SIZE - 1);
else
sz = PAGE_SIZE;
sz = min_t(unsigned long, sz, count);
if (!range_is_allowed(p >> PAGE_SHIFT, sz))
return -EPERM;
/*
* On ia64 if a page has been mapped somewhere as
* uncached, then it must also be accessed uncached
* by the kernel or data corruption may occur
*/
ptr = xlate_dev_mem_ptr(p);
if (!ptr) {
if (written)
break;
return -EFAULT;
}
copied = copy_from_user(ptr, buf, sz);
if (copied) {
written += sz - copied;
unxlate_dev_mem_ptr(p, ptr);
if (written)
break;
return -EFAULT;
}
unxlate_dev_mem_ptr(p, ptr);
buf += sz;
p += sz;
count -= sz;
written += sz;
}
*ppos += written;
return written;
}
int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
{
return 1;
}
#ifndef __HAVE_PHYS_MEM_ACCESS_PROT
static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
#ifdef pgprot_noncached
unsigned long offset = pfn << PAGE_SHIFT;
if (uncached_access(file, offset))
return pgprot_noncached(vma_prot);
#endif
return vma_prot;
}
#endif
#ifndef CONFIG_MMU
static unsigned long get_unmapped_area_mem(struct file *file,
unsigned long addr,
unsigned long len,
unsigned long pgoff,
unsigned long flags)
{
if (!valid_mmap_phys_addr_range(pgoff, len))
return (unsigned long) -EINVAL;
return pgoff << PAGE_SHIFT;
}
/* can't do an in-place private mapping if there's no MMU */
static inline int private_mapping_ok(struct vm_area_struct *vma)
{
return vma->vm_flags & VM_MAYSHARE;
}
#else
#define get_unmapped_area_mem NULL
static inline int private_mapping_ok(struct vm_area_struct *vma)
{
return 1;
}
#endif
void __attribute__((weak))
map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
{
/* nothing. architectures can override. */
}
void __attribute__((weak))
unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
{
/* nothing. architectures can override. */
}
static void mmap_mem_open(struct vm_area_struct *vma)
{
map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
static void mmap_mem_close(struct vm_area_struct *vma)
{
unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
static struct vm_operations_struct mmap_mem_ops = {
.open = mmap_mem_open,
.close = mmap_mem_close,
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys
#endif
};
static int mmap_mem(struct file * file, struct vm_area_struct * vma)
{
size_t size = vma->vm_end - vma->vm_start;
if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;
if (!private_mapping_ok(vma))
return -ENOSYS;
if (!range_is_allowed(vma->vm_pgoff, size))
return -EPERM;
if (!phys_mem_access_prot_allowed(file, vma->vm_pgoff, size,
&vma->vm_page_prot))
return -EINVAL;
vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
size,
vma->vm_page_prot);
vma->vm_ops = &mmap_mem_ops;
/* Remap-pfn-range will mark the range VM_IO and VM_RESERVED */
if (remap_pfn_range(vma,
vma->vm_start,
vma->vm_pgoff,
size,
vma->vm_page_prot)) {
unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
return -EAGAIN;
}
return 0;
}
#ifdef CONFIG_DEVKMEM
static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
{
unsigned long pfn;
/* Turn a kernel-virtual address into a physical page frame */
pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
* RED-PEN: on some architectures there is more mapped memory
* than available in mem_map which pfn_valid checks
* for. Perhaps should add a new macro here.
*
* RED-PEN: vmalloc is not supported right now.
*/
if (!pfn_valid(pfn))
return -EIO;
vma->vm_pgoff = pfn;
return mmap_mem(file, vma);
}
#endif
#ifdef CONFIG_CRASH_DUMP
/*
* Read memory corresponding to the old kernel.
*/
static ssize_t read_oldmem(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long pfn, offset;
size_t read = 0, csize;
int rc = 0;
while (count) {
pfn = *ppos / PAGE_SIZE;
if (pfn > saved_max_pfn)
return read;
offset = (unsigned long)(*ppos % PAGE_SIZE);
if (count > PAGE_SIZE - offset)
csize = PAGE_SIZE - offset;
else
csize = count;
rc = copy_oldmem_page(pfn, buf, csize, offset, 1);
if (rc < 0)
return rc;
buf += csize;
*ppos += csize;
read += csize;
count -= csize;
}
return read;
}
#endif
extern long vread(char *buf, char *addr, unsigned long count);
extern long vwrite(char *buf, char *addr, unsigned long count);
#ifdef CONFIG_DEVKMEM
/*
* This function reads the *virtual* memory as seen by the kernel.
*/
static ssize_t read_kmem(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
ssize_t low_count, read, sz;
char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */
read = 0;
if (p < (unsigned long) high_memory) {
low_count = count;
if (count > (unsigned long) high_memory - p)
low_count = (unsigned long) high_memory - p;
#ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
/* we don't have page 0 mapped on sparc and m68k.. */
if (p < PAGE_SIZE && low_count > 0) {
size_t tmp = PAGE_SIZE - p;
if (tmp > low_count) tmp = low_count;
if (clear_user(buf, tmp))
return -EFAULT;
buf += tmp;
p += tmp;
read += tmp;
low_count -= tmp;
count -= tmp;
}
#endif
while (low_count > 0) {
/*
* Handle first page in case it's not aligned
*/
if (-p & (PAGE_SIZE - 1))
sz = -p & (PAGE_SIZE - 1);
else
sz = PAGE_SIZE;
sz = min_t(unsigned long, sz, low_count);
/*
* On ia64 if a page has been mapped somewhere as
* uncached, then it must also be accessed uncached
* by the kernel or data corruption may occur
*/
kbuf = xlate_dev_kmem_ptr((char *)p);
if (copy_to_user(buf, kbuf, sz))
return -EFAULT;
buf += sz;
p += sz;
read += sz;
low_count -= sz;
count -= sz;
}
}
if (count > 0) {
kbuf = (char *)__get_free_page(GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
while (count > 0) {
int len = count;
if (len > PAGE_SIZE)
len = PAGE_SIZE;
len = vread(kbuf, (char *)p, len);
if (!len)
break;
if (copy_to_user(buf, kbuf, len)) {
free_page((unsigned long)kbuf);
return -EFAULT;
}
count -= len;
buf += len;
read += len;
p += len;
}
free_page((unsigned long)kbuf);
}
*ppos = p;
return read;
}
static inline ssize_t
do_write_kmem(void *p, unsigned long realp, const char __user * buf,
size_t count, loff_t *ppos)
{
ssize_t written, sz;
unsigned long copied;
written = 0;
#ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
/* we don't have page 0 mapped on sparc and m68k.. */
if (realp < PAGE_SIZE) {
unsigned long sz = PAGE_SIZE - realp;
if (sz > count)
sz = count;
/* Hmm. Do something? */
buf += sz;
p += sz;
realp += sz;
count -= sz;
written += sz;
}
#endif
while (count > 0) {
char *ptr;
/*
* Handle first page in case it's not aligned
*/
if (-realp & (PAGE_SIZE - 1))
sz = -realp & (PAGE_SIZE - 1);
else
sz = PAGE_SIZE;
sz = min_t(unsigned long, sz, count);
/*
* On ia64 if a page has been mapped somewhere as
* uncached, then it must also be accessed uncached
* by the kernel or data corruption may occur
*/
ptr = xlate_dev_kmem_ptr(p);
copied = copy_from_user(ptr, buf, sz);
if (copied) {
written += sz - copied;
if (written)
break;
return -EFAULT;
}
buf += sz;
p += sz;
realp += sz;
count -= sz;
written += sz;
}
*ppos += written;
return written;
}
/*
* This function writes to the *virtual* memory as seen by the kernel.
*/
static ssize_t write_kmem(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
ssize_t wrote = 0;
ssize_t virtr = 0;
ssize_t written;
char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
if (p < (unsigned long) high_memory) {
wrote = count;
if (count > (unsigned long) high_memory - p)
wrote = (unsigned long) high_memory - p;
written = do_write_kmem((void*)p, p, buf, wrote, ppos);
if (written != wrote)
return written;
wrote = written;
p += wrote;
buf += wrote;
count -= wrote;
}
if (count > 0) {
kbuf = (char *)__get_free_page(GFP_KERNEL);
if (!kbuf)
return wrote ? wrote : -ENOMEM;
while (count > 0) {
int len = count;
if (len > PAGE_SIZE)
len = PAGE_SIZE;
if (len) {
written = copy_from_user(kbuf, buf, len);
if (written) {
if (wrote + virtr)
break;
free_page((unsigned long)kbuf);
return -EFAULT;
}
}
len = vwrite(kbuf, (char *)p, len);
count -= len;
buf += len;
virtr += len;
p += len;
}
free_page((unsigned long)kbuf);
}
*ppos = p;
return virtr + wrote;
}
#endif
#ifdef CONFIG_DEVPORT
static ssize_t read_port(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
unsigned long i = *ppos;
char __user *tmp = buf;
if (!access_ok(VERIFY_WRITE, buf, count))
return -EFAULT;
while (count-- > 0 && i < 65536) {
if (__put_user(inb(i),tmp) < 0)
return -EFAULT;
i++;
tmp++;
}
*ppos = i;
return tmp-buf;
}
static ssize_t write_port(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
unsigned long i = *ppos;
const char __user * tmp = buf;
if (!access_ok(VERIFY_READ,buf,count))
return -EFAULT;
while (count-- > 0 && i < 65536) {
char c;
if (__get_user(c, tmp)) {
if (tmp > buf)
break;
return -EFAULT;
}
outb(c,i);
i++;
tmp++;
}
*ppos = i;
return tmp-buf;
}
#endif
static ssize_t read_null(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
return 0;
}
static ssize_t write_null(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
return count;
}
static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
struct splice_desc *sd)
{
return sd->len;
}
static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
}
static ssize_t read_zero(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
size_t written;
if (!count)
return 0;
if (!access_ok(VERIFY_WRITE, buf, count))
return -EFAULT;
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
written = 0;
while (count) {
unsigned long unwritten;
size_t chunk = count;
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
if (chunk > PAGE_SIZE)
chunk = PAGE_SIZE; /* Just for latency reasons */
unwritten = clear_user(buf, chunk);
written += chunk - unwritten;
if (unwritten)
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
break;
buf += chunk;
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
count -= chunk;
cond_resched();
}
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
return written ? written : -EFAULT;
}
static int mmap_zero(struct file * file, struct vm_area_struct * vma)
{
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
#ifndef CONFIG_MMU
return -ENOSYS;
remove ZERO_PAGE The commit b5810039a54e5babf428e9a1e89fc1940fabff11 contains the note A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue. And indeed this cacheline bouncing has shown up on large SGI systems. There was a situation where an Altix system was essentially livelocked tearing down ZERO_PAGE pagetables when an HPC app aborted during startup. This situation can be avoided in userspace, but it does highlight the potential scalability problem with refcounting ZERO_PAGE, and corner cases where it can really hurt (we don't want the system to livelock!). There are several broad ways to fix this problem: 1. add back some special casing to avoid refcounting ZERO_PAGE 2. per-node or per-cpu ZERO_PAGES 3. remove the ZERO_PAGE completely I will argue for 3. The others should also fix the problem, but they result in more complex code than does 3, with little or no real benefit that I can see. Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a false optimisation: if an application is performance critical, it would not be doing many read faults of new memory, or at least it could be expected to write to that memory soon afterwards. If cache or memory use is critical, it should not be working with a significant number of ZERO_PAGEs anyway (a more compact representation of zeroes should be used). As a sanity check -- mesuring on my desktop system, there are never many mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not increase much without it. When running a make -j4 kernel compile on my dual core system, there are about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000 ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second is torn down without being COWed). So removing ZERO_PAGE will save 1,000 page faults per second when running kbuild, while keeping it only saves less than 1 page clearing operation per second. 1 page clear is cheaper than a thousand faults, presumably, so there isn't an obvious loss. Neither the logical argument nor these basic tests give a guarantee of no regressions. However, this is a reasonable opportunity to try to remove the ZERO_PAGE from the pagefault path. If it is found to cause regressions, we can reintroduce it and just avoid refcounting it. The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked. I don't see much use to them except on benchmarks. All other users of ZERO_PAGE are converted just to use ZERO_PAGE(0) for simplicity. We can look at replacing them all and maybe ripping out ZERO_PAGE completely when we are more satisfied with this solution. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus "snif" Torvalds <torvalds@linux-foundation.org>
2007-10-16 01:24:40 -07:00
#endif
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
return 0;
}
static ssize_t write_full(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
return -ENOSPC;
}
/*
* Special lseek() function for /dev/null and /dev/zero. Most notably, you
* can fopen() both devices with "a" now. This was previously impossible.
* -- SRB.
*/
static loff_t null_lseek(struct file * file, loff_t offset, int orig)
{
return file->f_pos = 0;
}
/*
* The memory devices use the full 32/64 bits of the offset, and so we cannot
* check against negative addresses: they are ok. The return value is weird,
* though, in that case (0).
*
* also note that seeking relative to the "end of file" isn't supported:
* it has no meaning, so it returns -EINVAL.
*/
static loff_t memory_lseek(struct file * file, loff_t offset, int orig)
{
loff_t ret;
mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
switch (orig) {
case 0:
file->f_pos = offset;
ret = file->f_pos;
force_successful_syscall_return();
break;
case 1:
file->f_pos += offset;
ret = file->f_pos;
force_successful_syscall_return();
break;
default:
ret = -EINVAL;
}
mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return ret;
}
static int open_port(struct inode * inode, struct file * filp)
{
return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
}
#define zero_lseek null_lseek
#define full_lseek null_lseek
#define write_zero write_null
#define read_full read_zero
#define open_mem open_port
#define open_kmem open_mem
#define open_oldmem open_mem
static const struct file_operations mem_fops = {
.llseek = memory_lseek,
.read = read_mem,
.write = write_mem,
.mmap = mmap_mem,
.open = open_mem,
.get_unmapped_area = get_unmapped_area_mem,
};
#ifdef CONFIG_DEVKMEM
static const struct file_operations kmem_fops = {
.llseek = memory_lseek,
.read = read_kmem,
.write = write_kmem,
.mmap = mmap_kmem,
.open = open_kmem,
.get_unmapped_area = get_unmapped_area_mem,
};
#endif
static const struct file_operations null_fops = {
.llseek = null_lseek,
.read = read_null,
.write = write_null,
.splice_write = splice_write_null,
};
#ifdef CONFIG_DEVPORT
static const struct file_operations port_fops = {
.llseek = memory_lseek,
.read = read_port,
.write = write_port,
.open = open_port,
};
#endif
static const struct file_operations zero_fops = {
.llseek = zero_lseek,
.read = read_zero,
.write = write_zero,
.mmap = mmap_zero,
};
/*
* capabilities for /dev/zero
* - permits private mappings, "copies" are taken of the source of zeros
*/
static struct backing_dev_info zero_bdi = {
.capabilities = BDI_CAP_MAP_COPY,
};
static const struct file_operations full_fops = {
.llseek = full_lseek,
.read = read_full,
.write = write_full,
};
#ifdef CONFIG_CRASH_DUMP
static const struct file_operations oldmem_fops = {
.read = read_oldmem,
.open = open_oldmem,
};
#endif
static ssize_t kmsg_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
char *tmp;
ssize_t ret;
tmp = kmalloc(count + 1, GFP_KERNEL);
if (tmp == NULL)
return -ENOMEM;
ret = -EFAULT;
if (!copy_from_user(tmp, buf, count)) {
tmp[count] = 0;
ret = printk("%s", tmp);
if (ret > count)
/* printk can add a prefix */
ret = count;
}
kfree(tmp);
return ret;
}
static const struct file_operations kmsg_fops = {
.write = kmsg_write,
};
static int memory_open(struct inode * inode, struct file * filp)
{
int ret = 0;
lock_kernel();
switch (iminor(inode)) {
case 1:
filp->f_op = &mem_fops;
filp->f_mapping->backing_dev_info =
&directly_mappable_cdev_bdi;
break;
#ifdef CONFIG_DEVKMEM
case 2:
filp->f_op = &kmem_fops;
filp->f_mapping->backing_dev_info =
&directly_mappable_cdev_bdi;
break;
#endif
case 3:
filp->f_op = &null_fops;
break;
#ifdef CONFIG_DEVPORT
case 4:
filp->f_op = &port_fops;
break;
#endif
case 5:
filp->f_mapping->backing_dev_info = &zero_bdi;
filp->f_op = &zero_fops;
break;
case 7:
filp->f_op = &full_fops;
break;
case 8:
filp->f_op = &random_fops;
break;
case 9:
filp->f_op = &urandom_fops;
break;
case 11:
filp->f_op = &kmsg_fops;
break;
#ifdef CONFIG_CRASH_DUMP
case 12:
filp->f_op = &oldmem_fops;
break;
#endif
default:
unlock_kernel();
return -ENXIO;
}
if (filp->f_op && filp->f_op->open)
ret = filp->f_op->open(inode,filp);
unlock_kernel();
return ret;
}
static const struct file_operations memory_fops = {
.open = memory_open, /* just a selector for the real open */
};
static const struct {
unsigned int minor;
char *name;
umode_t mode;
const struct file_operations *fops;
} devlist[] = { /* list of minor devices */
{1, "mem", S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops},
#ifdef CONFIG_DEVKMEM
{2, "kmem", S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops},
#endif
{3, "null", S_IRUGO | S_IWUGO, &null_fops},
#ifdef CONFIG_DEVPORT
{4, "port", S_IRUSR | S_IWUSR | S_IRGRP, &port_fops},
#endif
{5, "zero", S_IRUGO | S_IWUGO, &zero_fops},
{7, "full", S_IRUGO | S_IWUGO, &full_fops},
{8, "random", S_IRUGO | S_IWUSR, &random_fops},
{9, "urandom", S_IRUGO | S_IWUSR, &urandom_fops},
{11,"kmsg", S_IRUGO | S_IWUSR, &kmsg_fops},
#ifdef CONFIG_CRASH_DUMP
{12,"oldmem", S_IRUSR | S_IWUSR | S_IRGRP, &oldmem_fops},
#endif
};
static struct class *mem_class;
static int __init chr_dev_init(void)
{
int i;
int err;
err = bdi_init(&zero_bdi);
if (err)
return err;
if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
mem_class = class_create(THIS_MODULE, "mem");
for (i = 0; i < ARRAY_SIZE(devlist); i++)
device_create_drvdata(mem_class, NULL,
MKDEV(MEM_MAJOR, devlist[i].minor),
NULL, devlist[i].name);
return 0;
}
fs_initcall(chr_dev_init);