kevin/linux
1
Fork 0
Code
a650d3839e
linux/include/asm-sparc64/cpudata.h

239 lines
7.0 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* cpudata.h: Per-cpu parameters.
*
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
* Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
#ifndef _SPARC64_CPUDATA_H
#define _SPARC64_CPUDATA_H
[SPARC64]: Initial sun4v TLB miss handling infrastructure. Things are a little tricky because, unlike sun4u, we have to: 1) do a hypervisor trap to do the TLB load. 2) do the TSB lookup calculations by hand Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 00:44:37 -07:00
#include <asm/hypervisor.h>
[SPARC64]: asm/cpudata.h needs asm/asi.h For the expansion of __GET_CPUID() on SMP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 22:15:41 -07:00
#include <asm/asi.h>
[SPARC64]: Initial sun4v TLB miss handling infrastructure. Things are a little tricky because, unlike sun4u, we have to: 1) do a hypervisor trap to do the TLB load. 2) do the TSB lookup calculations by hand Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 00:44:37 -07:00
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
#ifndef __ASSEMBLY__
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <linux/percpu.h>
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
#include <linux/threads.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
typedef struct {
/* Dcache line 1 */
[SPARC64]: Eliminate irq_cpustat_t. We can put the __softirq_pending mask in the cpudata, no need for the silly NR_CPUS array in kernel/softirq.c Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 22:46:43 -07:00
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
[SPARC64]: Use machine description and OBP properly for cpu probing. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-25 15:49:59 -07:00
unsigned int __pad0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned long clock_tick; /* %tick's per second */
[SPARC64]: More sensible udelay implementation. Take a page from the powerpc folks and just calculate the delay factor directly. Since frequency scaling chips use a system-tick register, the value is going to be the same system-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 02:23:37 -07:00
unsigned long __pad;
[SPARC64]: Use machine description and OBP properly for cpu probing. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-25 15:49:59 -07:00
unsigned int __pad1;
unsigned int __pad2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SPARC64]: Kill pgtable quicklists and use SLAB. Taking a nod from the powerpc port. With the per-cpu caching of both the page allocator and SLAB, the pgtable quicklist scheme becomes relatively silly and primitive. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:30:27 -07:00
/* Dcache line 2, rarely used */
[SPARC64]: Probe D/I/E-cache config and use. At boot time, determine the D-cache, I-cache and E-cache size and line-size. Use them in cache flushes when appropriate. This change was motivated by discovering that the D-cache on UltraSparc-IIIi and later are 64K not 32K, and the flushes done by the Cheetah error handlers were assuming a 32K size. There are still some pieces of code that are hard coding things and will need to be fixed up at some point. While we're here, fix the D-cache and I-cache parity error handlers to run with interrupts disabled, and when the trap occurs at trap level > 1 log the event via a counter displayed in /proc/cpuinfo. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 00:32:17 -07:00
unsigned int dcache_size;
unsigned int dcache_line_size;
unsigned int icache_size;
unsigned int icache_line_size;
unsigned int ecache_size;
unsigned int ecache_line_size;
[SPARC64]: Use machine description and OBP properly for cpu probing. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-25 15:49:59 -07:00
int core_id;
[SPARC64]: Proper multi-core scheduling support. The scheduling domain hierarchy is: all cpus --> cpus that share an instruction cache --> cpus that share an integer execution unit Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 17:01:39 -07:00
int proc_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} cpuinfo_sparc;
DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
#define local_cpu_data() __get_cpu_var(__cpu_data)
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
/* Trap handling code needs to get at a few critical values upon
* trap entry and to process TSB misses. These cannot be in the
* per_cpu() area as we really need to lock them into the TLB and
* thus make them part of the main kernel image. As a result we
* try to make this as small as possible.
*
* This is padded out and aligned to 64-bytes to avoid false sharing
* on SMP.
*/
/* If you modify the size of this structure, please update
* TRAP_BLOCK_SZ_SHIFT below.
*/
struct thread_info;
struct trap_per_cpu {
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
/* D-cache line 1: Basic thread information, cpu and device mondo queues */
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
struct thread_info *thread;
unsigned long pgd_paddr;
[SPARC64]: Add sun4v mondo queue bases to struct trap_per_cpu. Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be 0x40 not 0x20. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:53:56 -07:00
unsigned long cpu_mondo_pa;
unsigned long dev_mondo_pa;
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
[SPARC64]: Add sun4v mondo queue bases to struct trap_per_cpu. Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be 0x40 not 0x20. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:53:56 -07:00
unsigned long resum_mondo_pa;
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
unsigned long resum_kernel_buf_pa;
[SPARC64]: Add sun4v mondo queue bases to struct trap_per_cpu. Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be 0x40 not 0x20. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:53:56 -07:00
unsigned long nonresum_mondo_pa;
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
unsigned long nonresum_kernel_buf_pa;
[SPARC64]: Initial sun4v TLB miss handling infrastructure. Things are a little tricky because, unlike sun4u, we have to: 1) do a hypervisor trap to do the TLB load. 2) do the TSB lookup calculations by hand Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 00:44:37 -07:00
[SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 17:41:20 -07:00
/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
[SPARC64]: Initial sun4v TLB miss handling infrastructure. Things are a little tricky because, unlike sun4u, we have to: 1) do a hypervisor trap to do the TLB load. 2) do the TSB lookup calculations by hand Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 00:44:37 -07:00
struct hv_fault_status fault_info;
[SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 17:41:20 -07:00
/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */
unsigned long cpu_mondo_block_pa;
unsigned long cpu_list_pa;
[SPARC64]: Add a secondary TSB for hugepage mappings. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 01:49:59 -07:00
unsigned long tsb_huge;
unsigned long tsb_huge_temp;
[SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 17:41:20 -07:00
[SPARC64]: Send all device interrupts via one PIL. This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00
/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */
[SPARC64]: Make IVEC pointers 64-bit. Currently we chain IVEC entries using 32-bit "pointers" because we know that the ivector_table is in the main kernel image, thus below 4GB. This uses proper 64-bit pointers instead. Whilst this bloats up the kernel image size, this sets the infrastructure necessary to significantly shrink the kernel size by using physical addresses and dynamically allocating the ivector table. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12 02:59:40 -07:00
unsigned long irq_worklist;
[SPARC64]: Use machine description and OBP properly for cpu probing. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-25 15:49:59 -07:00
unsigned int cpu_mondo_qmask;
unsigned int dev_mondo_qmask;
unsigned int resum_qmask;
unsigned int nonresum_qmask;
[SPARC64]: Initial LDOM cpu hotplug support. Only adding cpus is supports at the moment, removal will come next. When new cpus are configured, the machine description is updated. When we get the configure request we pass in a cpu mask of to-be-added cpus to the mdesc CPU node parser so it only fetches information for those cpus. That code also proceeds to update the SMT/multi-core scheduling bitmaps. cpu_up() does all the work and we return the status back over the DS channel. CPUs via dr-cpu need to be booted straight out of the hypervisor, and this requires: 1) A new trampoline mechanism. CPUs are booted straight out of the hypervisor with MMU disabled and running in physical addresses with no mappings installed in the TLB. The new hvtramp.S code sets up the critical cpu state, installs the locked TLB mappings for the kernel, and turns the MMU on. It then proceeds to follow the logic of the existing trampoline.S SMP cpu bringup code. 2) All calls into OBP have to be disallowed when domaining is enabled. Since cpus boot straight into the kernel from the hypervisor, OBP has no state about that cpu and therefore cannot handle being invoked on that cpu. Luckily it's only a handful of interfaces which can be called after the OBP device tree is obtained. For example, rebooting, halting, powering-off, and setting options node variables. CPU removal support will require some infrastructure changes here. Namely we'll have to process the requests via a true kernel thread instead of in a workqueue. workqueues run on a per-cpu thread, but when unconfiguring we might need to force the thread to execute on another cpu if the current cpu is the one being removed. Removal of a cpu also causes the kernel to destroy that cpu's workqueue running thread. Another issue on removal is that we may have interrupts still pointing to the cpu-to-be-removed. So new code will be needed to walk the active INO list and retarget those cpus as-needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-13 16:03:42 -07:00
void *hdesc;
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
} __attribute__((aligned(64)));
extern struct trap_per_cpu trap_block[NR_CPUS];
[SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 02:29:17 -07:00
extern void init_cur_cpu_trap(struct thread_info *);
[SPARC64]: Kill sole argument passed to setup_tba(). No longer used, and move extern declaration to a header file. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:33:37 -07:00
extern void setup_tba(void);
[SPARC64]: Use machine description and OBP properly for cpu probing. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-25 15:49:59 -07:00
extern int ncpus_probed;
extern unsigned long real_hard_smp_processor_id(void);
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
struct cpuid_patch_entry {
unsigned int addr;
unsigned int cheetah_safari[4];
unsigned int cheetah_jbus[4];
unsigned int starfire[4];
[SPARC64]: Add sun4v case to __GET_CPUID() patch tables. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 16:40:53 -07:00
unsigned int sun4v[4];
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
};
extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 01:00:16 -07:00
struct sun4v_1insn_patch_entry {
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
unsigned int addr;
unsigned int insn;
};
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 01:00:16 -07:00
extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
__sun4v_1insn_patch_end;
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 23:27:28 -07:00
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 01:00:16 -07:00
struct sun4v_2insn_patch_entry {
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 23:27:28 -07:00
unsigned int addr;
unsigned int insns[2];
};
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 01:00:16 -07:00
extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
__sun4v_2insn_patch_end;
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
#endif /* !(__ASSEMBLY__) */
[SPARC64]: Add sun4v mondo queue bases to struct trap_per_cpu. Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be 0x40 not 0x20. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:53:56 -07:00
#define TRAP_PER_CPU_THREAD 0x00
#define TRAP_PER_CPU_PGD_PADDR 0x08
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
#define TRAP_PER_CPU_CPU_MONDO_PA 0x10
#define TRAP_PER_CPU_DEV_MONDO_PA 0x18
#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20
#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28
#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30
#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38
[SPARC64]: Add sun4v mondo queue bases to struct trap_per_cpu. Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be 0x40 not 0x20. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:53:56 -07:00
#define TRAP_PER_CPU_FAULT_INFO 0x40
[SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 17:41:20 -07:00
#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
#define TRAP_PER_CPU_CPU_LIST_PA 0xc8
[SPARC64]: Add a secondary TSB for hugepage mappings. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 01:49:59 -07:00
#define TRAP_PER_CPU_TSB_HUGE 0xd0
#define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8
[SPARC64]: Send all device interrupts via one PIL. This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00
#define TRAP_PER_CPU_IRQ_WORKLIST 0xe0
[SPARC64]: Make IVEC pointers 64-bit. Currently we chain IVEC entries using 32-bit "pointers" because we know that the ivector_table is in the main kernel image, thus below 4GB. This uses proper 64-bit pointers instead. Whilst this bloats up the kernel image size, this sets the infrastructure necessary to significantly shrink the kernel size by using physical addresses and dynamically allocating the ivector table. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12 02:59:40 -07:00
#define TRAP_PER_CPU_CPU_MONDO_QMASK 0xe8
#define TRAP_PER_CPU_DEV_MONDO_QMASK 0xec
#define TRAP_PER_CPU_RESUM_QMASK 0xf0
#define TRAP_PER_CPU_NONRESUM_QMASK 0xf4
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
[SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 17:41:20 -07:00
#define TRAP_BLOCK_SZ_SHIFT 8
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
[SPARC64]: Add sun4v case to __GET_CPUID() patch tables. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 16:40:53 -07:00
#include <asm/scratchpad.h>
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
#define __GET_CPUID(REG) \
/* Spitfire implementation (default). */ \
661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x1f, REG; \
nop; \
.section .cpuid_patch, "ax"; \
/* Instruction location. */ \
.word 661b; \
/* Cheetah Safari implementation. */ \
ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x3ff, REG; \
nop; \
/* Cheetah JBUS implementation. */ \
ldxa [%g0] ASI_JBUS_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x1f, REG; \
nop; \
/* Starfire implementation. */ \
sethi %hi(0x1fff40000d0 >> 9), REG; \
sllx REG, 9, REG; \
or REG, 0xd0, REG; \
lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
[SPARC64]: Add sun4v case to __GET_CPUID() patch tables. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 16:40:53 -07:00
/* sun4v implementation. */ \
mov SCRATCHPAD_CPUID, REG; \
ldxa [REG] ASI_SCRATCHPAD, REG; \
nop; \
[SPARC64]: asm/cpudata.h needs asm/asi.h For the expansion of __GET_CPUID() on SMP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 22:15:41 -07:00
nop; \
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
.previous;
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
[SPARC64]: Fix uniprocessor IRQ targetting on SUN4V. We need to use the real hardware processor ID when targetting interrupts, not the "define to 0" thing the uniprocessor build gives us. Also, fill in the Node-ID and Agent-ID fields properly on sun4u/Safari. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 09:38:06 -07:00
#ifdef CONFIG_SMP
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
__GET_CPUID(TMP) \
sethi %hi(trap_block), DEST; \
sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \
or DEST, %lo(trap_block), DEST; \
add DEST, TMP, DEST; \
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
/* Clobbers TMP, current address space PGD phys address into DEST. */
#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
[SPARC64]: Send all device interrupts via one PIL. This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
/* Clobbers TMP, loads DEST with current thread info pointer. */
#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
/* Given the current thread info pointer in THR, load the per-cpu
* area base of the current processor into DEST. REG1, REG2, and REG3 are
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
* clobbered.
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
*
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
* You absolutely cannot use DEST as a temporary in this code. The
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
* reason is that traps can happen during execution, and return from
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
* trap will load the fully resolved DEST per-cpu base. This can corrupt
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
* the calculations done by the macro mid-stream.
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
*/
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
[SPARC64]: Eliminate NR_CPUS limitations. Cheetah systems can have cpuids as large as 1023, although physical systems don't have that many cpus. Only three limitations existed in the kernel preventing arbitrary NR_CPUS values: 1) dcache dirty cpu state stored in page->flags on D-cache aliasing platforms. With some build time calculations and some build-time BUG checks on page->flags layout, this one was easily solved. 2) The cheetah XCALL delivery code could only handle a cpumask with up to 32 cpus set. Some simple looping logic clears that up too. 3) thread_info->cpu was a u8, easily changed to a u16. There are a few spots in the kernel that still put NR_CPUS sized arrays on the kernel stack, but that's not a sparc64 specific problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-26 01:14:43 -07:00
lduh [THR + TI_CPU], REG1; \
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
sethi %hi(__per_cpu_shift), REG3; \
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
sethi %hi(__per_cpu_base), REG2; \
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
ldx [REG2 + %lo(__per_cpu_base)], REG2; \
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:34:51 -07:00
sllx REG1, REG3, REG3; \
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
add REG3, REG2, DEST;
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
#else
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
sethi %hi(trap_block), DEST; \
or DEST, %lo(trap_block), DEST; \
[SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 03:53:50 -07:00
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
/* Uniprocessor versions, we know the cpuid is zero. */
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
[SPARC64]: Send all device interrupts via one PIL. This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00
/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
[SPARC64]: Send all device interrupts via one PIL. This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
/* No per-cpu areas on uniprocessor, so no need to load DEST. */
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
[SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:27:19 -07:00
#endif /* !(CONFIG_SMP) */
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif /* _SPARC64_CPUDATA_H */
Copy Permalink