kevin/linux
1
Fork 0
Code
a048d3aff8
linux/arch/x86/kernel/entry_64.S

1470 lines
34 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* linux/arch/x86_64/entry.S
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
*/
/*
* entry.S contains the system-call and fault low-level handling routines.
*
* NOTE: This code handles signal-recognition, which happens every time
* after an interrupt and after each system call.
*
* Normal syscalls and interrupts don't save a full stack frame, this is
* only done for syscall tracing, signals or fork/exec et.al.
*
* A note on terminology:
* - top of stack: Architecture defined interrupt frame from SS to RIP
* at the top of the kernel process stack.
* - partial stack frame: partially saved registers upto R11.
* - full stack frame: Like partial stack frame, but all register saved.
[PATCH] Add some comments to entry.S And remove some old obsolete ones. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:29 -07:00
*
* Some macro usage:
* - CFI macros are used to generate dwarf2 unwind information for better
* backtraces. They don't change any code.
* - SAVE_ALL/RESTORE_ALL - Save/restore all registers
* - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
* There are unfortunately lots of special cases where some registers
* not touched. The macro is a big mess that should be cleaned up.
* - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
* Gives a full stack frame.
* - ENTRY/END Define functions in the symbol table.
* - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
* frame that is otherwise undefined after a SYSCALL
* - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
* - errorentry/paranoidentry/zeroentry - Define exception entry points.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/dwarf2.h>
#include <asm/calling.h>
kbuild: alpha,x86_64 use generic asm-offsets.h support Delete obsolete stuff from arch makefiles Rename .h file to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 12:28:48 -07:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <asm/msr.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/hw_irq.h>
[PATCH] x86_64: Allow nesting of int3 by default for kprobes This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 17:56:39 -07:00
#include <asm/page.h>
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
#include <asm/irqflags.h>
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
#include <asm/paravirt.h>
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 11:17:27 -07:00
#include <asm/ftrace.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 15:37:04 -07:00
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_64BIT 0x80000000
#define __AUDIT_ARCH_LE 0x40000000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.code64
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:42 -07:00
#ifdef CONFIG_FTRACE
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:43 -07:00
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
subq $0x38, %rsp
movq %rax, (%rsp)
movq %rcx, 8(%rsp)
movq %rdx, 16(%rsp)
movq %rsi, 24(%rsp)
movq %rdi, 32(%rsp)
movq %r8, 40(%rsp)
movq %r9, 48(%rsp)
movq 0x38(%rsp), %rdi
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 11:17:27 -07:00
subq $MCOUNT_INSN_SIZE, %rdi
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:43 -07:00
.globl mcount_call
mcount_call:
call ftrace_stub
movq 48(%rsp), %r9
movq 40(%rsp), %r8
movq 32(%rsp), %rdi
movq 24(%rsp), %rsi
movq 16(%rsp), %rdx
movq 8(%rsp), %rcx
movq (%rsp), %rax
addq $0x38, %rsp
retq
END(mcount)
ENTRY(ftrace_caller)
/* taken from glibc */
subq $0x38, %rsp
movq %rax, (%rsp)
movq %rcx, 8(%rsp)
movq %rdx, 16(%rsp)
movq %rsi, 24(%rsp)
movq %rdi, 32(%rsp)
movq %r8, 40(%rsp)
movq %r9, 48(%rsp)
movq 0x38(%rsp), %rdi
movq 8(%rbp), %rsi
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 11:17:27 -07:00
subq $MCOUNT_INSN_SIZE, %rdi
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:43 -07:00
.globl ftrace_call
ftrace_call:
call ftrace_stub
movq 48(%rsp), %r9
movq 40(%rsp), %r8
movq 32(%rsp), %rdi
movq 24(%rsp), %rsi
movq 16(%rsp), %rdx
movq 8(%rsp), %rcx
movq (%rsp), %rax
addq $0x38, %rsp
.globl ftrace_stub
ftrace_stub:
retq
END(ftrace_caller)
#else /* ! CONFIG_DYNAMIC_FTRACE */
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:42 -07:00
ENTRY(mcount)
cmpq $ftrace_stub, ftrace_trace_function
jnz trace
.globl ftrace_stub
ftrace_stub:
retq
trace:
/* taken from glibc */
subq $0x38, %rsp
movq %rax, (%rsp)
movq %rcx, 8(%rsp)
movq %rdx, 16(%rsp)
movq %rsi, 24(%rsp)
movq %rdi, 32(%rsp)
movq %r8, 40(%rsp)
movq %r9, 48(%rsp)
movq 0x38(%rsp), %rdi
movq 8(%rbp), %rsi
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 11:17:27 -07:00
subq $MCOUNT_INSN_SIZE, %rdi
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:42 -07:00
call *ftrace_trace_function
movq 48(%rsp), %r9
movq 40(%rsp), %r8
movq 32(%rsp), %rdi
movq 24(%rsp), %rsi
movq 16(%rsp), %rdx
movq 8(%rsp), %rcx
movq (%rsp), %rax
addq $0x38, %rsp
jmp ftrace_stub
END(mcount)
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:43 -07:00
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FTRACE */
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 12:20:42 -07:00
[PATCH] x86_64: Remove unused macro in preempt support Remove unused macro in preempt support Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:05 -07:00
#ifndef CONFIG_PREEMPT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define retint_kernel retint_restore_args
#endif
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
#ifdef CONFIG_PARAVIRT
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:28 -07:00
ENTRY(native_usergs_sysret64)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
swapgs
sysretq
#endif /* CONFIG_PARAVIRT */
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
#ifdef CONFIG_TRACE_IRQFLAGS
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
TRACE_IRQS_ON
1:
#endif
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* C code is not supposed to know about undefined top of stack. Every time
* a C function with an pt_regs argument is called from the SYSCALL based
* fast path FIXUP_TOP_OF_STACK is needed.
* RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
* manipulation.
*/
/* %rsp:at FRAMEEND */
.macro FIXUP_TOP_OF_STACK tmp
movq %gs:pda_oldrsp,\tmp
movq \tmp,RSP(%rsp)
movq $__USER_DS,SS(%rsp)
movq $__USER_CS,CS(%rsp)
movq $-1,RCX(%rsp)
movq R11(%rsp),\tmp /* get eflags */
movq \tmp,EFLAGS(%rsp)
.endm
.macro RESTORE_TOP_OF_STACK tmp,offset=0
movq RSP-\offset(%rsp),\tmp
movq \tmp,%gs:pda_oldrsp
movq EFLAGS-\offset(%rsp),\tmp
movq \tmp,R11-\offset(%rsp)
.endm
.macro FAKE_STACK_FRAME child_rip
/* push in order ss, rsp, eflags, cs, rip */
[PATCH] x86_64: Small assembly improvements Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:48 -07:00
xorl %eax, %eax
x86: use __KERNEL_DS as SS when returning to a kernel thread This is needed when the kernel is running on RING3, such as under Xen. x86_64 has a weird feature that makes it #GP on iret when SS is a null descriptor. This need to be tested on bare metal to make sure it doesn't cause any problems. AMD specs say SS is always ignored (except on iret?). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:25 -07:00
pushq $__KERNEL_DS /* ss */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/*CFI_REL_OFFSET ss,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REL_OFFSET rsp,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $(1<<9) /* eflags - interrupts on */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/*CFI_REL_OFFSET rflags,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $__KERNEL_CS /* cs */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/*CFI_REL_OFFSET cs,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq \child_rip /* rip */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REL_OFFSET rip,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rax /* orig rax */
CFI_ADJUST_CFA_OFFSET 8
.endm
.macro UNFAKE_STACK_FRAME
addq $8*6, %rsp
CFI_ADJUST_CFA_OFFSET -(6*8)
.endm
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
.macro CFI_DEFAULT_STACK start=1
.if \start
CFI_STARTPROC simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:41 -07:00
CFI_SIGNAL_FRAME
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_DEF_CFA rsp,SS+8
.else
CFI_DEF_CFA_OFFSET SS+8
.endif
CFI_REL_OFFSET r15,R15
CFI_REL_OFFSET r14,R14
CFI_REL_OFFSET r13,R13
CFI_REL_OFFSET r12,R12
CFI_REL_OFFSET rbp,RBP
CFI_REL_OFFSET rbx,RBX
CFI_REL_OFFSET r11,R11
CFI_REL_OFFSET r10,R10
CFI_REL_OFFSET r9,R9
CFI_REL_OFFSET r8,R8
CFI_REL_OFFSET rax,RAX
CFI_REL_OFFSET rcx,RCX
CFI_REL_OFFSET rdx,RDX
CFI_REL_OFFSET rsi,RSI
CFI_REL_OFFSET rdi,RDI
CFI_REL_OFFSET rip,RIP
/*CFI_REL_OFFSET cs,CS*/
/*CFI_REL_OFFSET rflags,EFLAGS*/
CFI_REL_OFFSET rsp,RSP
/*CFI_REL_OFFSET ss,SS*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.endm
/*
* A newly forked process directly context switches into this.
*/
/* rdi: prev */
ENTRY(ret_from_fork)
CFI_DEFAULT_STACK
[PATCH] Don't leak NT bit into next task SYSENTER can cause a NT to be set which might cause crashes on the IRET in the next task. Following similar i386 patch from Linus. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:41 -07:00
push kernel_eflags(%rip)
CFI_ADJUST_CFA_OFFSET 4
popf # reset kernel eflags
CFI_ADJUST_CFA_OFFSET -4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call schedule_tail
GET_THREAD_INFO(%rcx)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnz rff_trace
rff_action:
RESTORE_REST
testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
testl $_TIF_IA32,TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnz int_ret_from_sys_call
RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
jmp ret_from_sys_call
rff_trace:
movq %rsp,%rdi
call syscall_trace_leave
GET_THREAD_INFO(%rcx)
jmp rff_action
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(ret_from_fork)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* System call entry. Upto 6 arguments in registers are supported.
*
* SYSCALL does not save anything on the stack and does not change the
* stack pointer.
*/
/*
* Register setup:
* rax system call number
* rdi arg0
* rcx return address for syscall/sysret, C arg3
* rsi arg1
* rdx arg2
* r10 arg3 (--> moved to rcx for C)
* r8 arg4
* r9 arg5
* r11 eflags for syscall/sysret, temporary for C
* r12-r15,rbp,rbx saved by C code, not touched.
*
* Interrupts are off on entry.
* Only called from user space.
*
* XXX if we had a free scratch register we could save the RSP into the stack frame
* and report it properly in ps. Unfortunately we haven't.
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 10:50:00 -07:00
*
* When user can change the frames always force IRET. That is because
* it deals with uncanonical addresses better. SYSRET has trouble
* with them due to bugs in both AMD and Intel CPUs.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
ENTRY(system_call)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_STARTPROC simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:41 -07:00
CFI_SIGNAL_FRAME
[PATCH] x86_64: reliable stack trace support (x86-64 syscall Adjust the CFA offset for 64- and 32-bit syscall entries so that the five slots pre-subtracted from the stack pointer do not appear to reside outside of the current frame. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:38 -07:00
CFI_DEF_CFA rsp,PDA_STACKOFFSET
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS_UNSAFE_STACK
/*
* A hypervisor implementation might want to use a label
* after the swapgs, so that it can do the swapgs
* for the guest and jump here on syscall.
*/
ENTRY(system_call_after_swapgs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq %rsp,%gs:pda_oldrsp
movq %gs:pda_kernelstack,%rsp
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* No need to follow this irqs off/on section - it's straight
* and short:
*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_ARGS 8,1
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 02:38:07 -07:00
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnz tracesys
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 15:37:04 -07:00
system_call_fastpath:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cmpq $__NR_syscall_max,%rax
ja badsys
movq %r10,%rcx
call *sys_call_table(,%rax,8) # XXX: rip relative
movq %rax,RAX-ARGOFFSET(%rsp)
/*
* Syscall return path ending with SYSRET (fast path)
* Has incomplete stack frame and undefined top of stack.
*/
ret_from_sys_call:
[PATCH] x86_64: Call do_notify_resume unconditionally in entry.S This removes some unnecessary code in the assembly files. Matches i386 behaviour. In addition don't clear the work check mask after work has been done. This fixes some theoretical signal/other event losses. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:02 -07:00
movl $_TIF_ALLWORK_MASK,%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* edi: flagmask */
sysret_check:
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
LOCKDEP_SYS_EXIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
andl %edi,%edx
jnz sysret_careful
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-06 18:14:02 -07:00
CFI_REMEMBER_STATE
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* sysretq will re-enable interrupts:
*/
TRACE_IRQS_ON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq RIP-ARGOFFSET(%rsp),%rcx
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REGISTER rip,rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
RESTORE_ARGS 0,-ARG_SKIP,1
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/*CFI_REGISTER rflags,r11*/
x86/paravirt, 64-bit: don't restore user rsp within sysret There's no need to combine restoring the user rsp within the sysret pvop, so split it out. This makes the pvop's semantics closer to the machine instruction. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:27 -07:00
movq %gs:pda_oldrsp, %rsp
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:28 -07:00
USERGS_SYSRET64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-06 18:14:02 -07:00
CFI_RESTORE_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Handle reschedules */
/* edx: work, edi: workmask */
sysret_careful:
bt $TIF_NEED_RESCHED,%edx
jnc sysret_signal
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call schedule
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp sysret_check
/* Handle a signal */
sysret_signal:
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 15:37:04 -07:00
#ifdef CONFIG_AUDITSYSCALL
bt $TIF_SYSCALL_AUDIT,%edx
jc sysret_audit
#endif
[PATCH] x86_64: Readd missing tests in entry.S Cleans up the system exit call slightly and synchronizes with my tree again. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 21:53:19 -07:00
/* edx: work flags (arg3) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
leaq do_notify_resume(%rip),%rax
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
call ptregscall_common
x86_64: remove bogus optimization in sysret_signal This short-circuit path in sysret_signal looks wrong to me. AFAICT, in practice the branch is never taken--and if it were, it would go wrong. To wit, try loading a module whose init function does set_thread_flag(TIF_IRET), and see insmod crash (presumably with a wrong user stack pointer). This is because the FIXUP_TOP_OF_STACK work hasn't been done yet when we jump around the call to ptregscall_common and get to int_with_check--where it expects the user RSP,SS,CS and EFLAGS to have been stored by FIXUP_TOP_OF_STACK. I don't think it's normally possible to get to sysret_signal with no _TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are already superfluous. If it ever did happen, it is harmless to call do_notify_resume with nothing for it to do. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 20:41:12 -07:00
movl $_TIF_WORK_MASK,%edi
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 10:50:00 -07:00
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 10:50:00 -07:00
jmp int_with_check
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
badsys:
movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
jmp ret_from_sys_call
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 15:37:04 -07:00
#ifdef CONFIG_AUDITSYSCALL
/*
* Fast path for syscall audit without full syscall trace.
* We just call audit_syscall_entry() directly, and then
* jump back to the normal fast path.
*/
auditsys:
movq %r10,%r9 /* 6th arg: 4th syscall arg */
movq %rdx,%r8 /* 5th arg: 3rd syscall arg */
movq %rsi,%rcx /* 4th arg: 2nd syscall arg */
movq %rdi,%rdx /* 3rd arg: 1st syscall arg */
movq %rax,%rsi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */
call audit_syscall_entry
LOAD_ARGS 0 /* reload call-clobbered registers */
jmp system_call_fastpath
/*
* Return fast path for syscall audit. Call audit_syscall_exit()
* directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
* masked off.
*/
sysret_audit:
movq %rax,%rsi /* second arg, syscall return value */
cmpq $0,%rax /* is it < 0? */
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
call audit_syscall_exit
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
jmp sysret_check
#endif /* CONFIG_AUDITSYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Do syscall tracing */
tracesys:
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 15:37:04 -07:00
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jz auditsys
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-16 21:59:11 -07:00
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 02:38:07 -07:00
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %rax because syscall_trace_enter() returned
* the value it wants us to use in the table lookup.
*/
LOAD_ARGS ARGOFFSET, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
RESTORE_REST
cmpq $__NR_syscall_max,%rax
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-16 21:59:11 -07:00
ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-16 21:59:11 -07:00
movq %rax,RAX-ARGOFFSET(%rsp)
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 10:50:00 -07:00
/* Use IRET because user could have changed frame */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Syscall return path ending with IRET.
* Has correct top of stack, but partial stack frame.
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-06 18:14:02 -07:00
*/
.globl int_ret_from_sys_call
x86_64 ia32 syscall audit fast-path This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-24 01:13:31 -07:00
.globl int_with_check
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-06 18:14:02 -07:00
int_ret_from_sys_call:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
testl $3,CS-ARGOFFSET(%rsp)
je retint_restore_args
movl $_TIF_ALLWORK_MASK,%edi
/* edi: mask to check */
int_with_check:
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
LOCKDEP_SYS_EXIT_IRQ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
andl %edi,%edx
jnz int_careful
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
andl $~TS_COMPAT,TI_status(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp retint_swapgs
/* Either reschedule or signal or syscall exit tracking needed. */
/* First do a reschedule test. */
/* edx: work, edi: workmask */
int_careful:
bt $TIF_NEED_RESCHED,%edx
jnc int_very_careful
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call schedule
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp int_with_check
/* handle signals and tracing -- both require a full stack frame */
int_very_careful:
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
/* Check for syscall exit trace */
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 02:38:07 -07:00
testl $_TIF_WORK_SYSCALL_EXIT,%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jz int_signal
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
leaq 8(%rsp),%rdi # &ptregs -> arg1
call syscall_trace_leave
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 02:38:07 -07:00
andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp int_restore_rest
int_signal:
sched: high-res preemption tick Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 13:08:29 -07:00
testl $_TIF_DO_NOTIFY_MASK,%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jz 1f
movq %rsp,%rdi # &ptregs -> arg1
xorl %esi,%esi # oldset -> arg2
call do_notify_resume
x86_64: fix delayed signals On three of the several paths in entry_64.S that call do_notify_resume() on the way back to user mode, we fail to properly check again for newly-arrived work that requires another call to do_notify_resume() before going to user mode. These paths set the mask to check only _TIF_NEED_RESCHED, but this is wrong. The other paths that lead to do_notify_resume() do this correctly already, and entry_32.S does it correctly in all cases. All paths back to user mode have to check all the _TIF_WORK_MASK flags at the last possible stage, with interrupts disabled. Otherwise, we miss any flags (TIF_SIGPENDING for example) that were set any time after we entered do_notify_resume(). More work flags can be set (or left set) synchronously inside do_notify_resume(), as TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs (which then send an asynchronous interrupt). There are many different scenarios that could hit this bug, most of them races. The simplest one to demonstrate does not require any race: when one signal has done handler setup at the check before returning from a syscall, and there is another signal pending that should be handled. The second signal's handler should interrupt the first signal handler before it actually starts (so the interrupted PC is still at the handler's entry point). Instead, it runs away until the next kernel entry (next syscall, tick, etc). This test behaves correctly on 32-bit kernels, and fails on 64-bit (either 32-bit or 64-bit test binary). With this fix, it works. #define _GNU_SOURCE #include <stdio.h> #include <signal.h> #include <string.h> #include <sys/ucontext.h> #ifndef REG_RIP #define REG_RIP REG_EIP #endif static sig_atomic_t hit1, hit2; static void handler (int sig, siginfo_t *info, void *ctx) { ucontext_t *uc = ctx; if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler) { if (sig == SIGUSR1) hit1 = 1; else hit2 = 1; } printf ("%s at %#lx\n", strsignal (sig), uc->uc_mcontext.gregs[REG_RIP]); } int main (void) { struct sigaction sa; sigset_t set; sigemptyset (&sa.sa_mask); sa.sa_flags = SA_SIGINFO; sa.sa_sigaction = &handler; if (sigaction (SIGUSR1, &sa, NULL) || sigaction (SIGUSR2, &sa, NULL)) return 2; sigemptyset (&set); sigaddset (&set, SIGUSR1); sigaddset (&set, SIGUSR2); if (sigprocmask (SIG_BLOCK, &set, NULL)) return 3; printf ("main at %p, handler at %p\n", &main, &handler); raise (SIGUSR1); raise (SIGUSR2); if (sigprocmask (SIG_UNBLOCK, &set, NULL)) return 4; if (hit1 + hit2 == 1) { puts ("PASS"); return 0; } puts ("FAIL"); return 1; } Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 14:50:39 -07:00
1: movl $_TIF_WORK_MASK,%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int_restore_rest:
RESTORE_REST
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp int_with_check
CFI_ENDPROC
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-06 18:14:02 -07:00
END(system_call)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Certain special system calls that need to save a complete full stack frame.
*/
.macro PTREGSCALL label,func,arg
.globl \label
\label:
leaq \func(%rip),%rax
leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
jmp ptregscall_common
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(\label)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.endm
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_STARTPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
PTREGSCALL stub_iopl, sys_iopl, %rsi
ENTRY(ptregscall_common)
popq %r11
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
CFI_REGISTER rip, r11
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
movq %r11, %r15
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REGISTER rip, r15
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
FIXUP_TOP_OF_STACK %r11
call *%rax
RESTORE_TOP_OF_STACK %r11
movq %r15, %r11
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REGISTER rip, r11
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
RESTORE_REST
pushq %r11
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rip, 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ret
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(ptregscall_common)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(stub_execve)
CFI_STARTPROC
popq %r11
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
CFI_REGISTER rip, r11
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
FIXUP_TOP_OF_STACK %r11
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 04:55:57 -07:00
movq %rsp, %rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call sys_execve
RESTORE_TOP_OF_STACK %r11
movq %rax,RAX(%rsp)
RESTORE_REST
jmp int_ret_from_sys_call
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(stub_execve)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* sigreturn is special because it needs to restore all registers on return.
* This cannot be done with SYSRET, so use the IRET return path instead.
*/
ENTRY(stub_rt_sigreturn)
CFI_STARTPROC
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
addq $8, %rsp
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
movq %rsp,%rdi
FIXUP_TOP_OF_STACK %r11
call sys_rt_sigreturn
movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
RESTORE_REST
jmp int_ret_from_sys_call
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(stub_rt_sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/*
* initial frame state for interrupts and exceptions
*/
.macro _frame ref
CFI_STARTPROC simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:41 -07:00
CFI_SIGNAL_FRAME
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_DEF_CFA rsp,SS+8-\ref
/*CFI_REL_OFFSET ss,SS-\ref*/
CFI_REL_OFFSET rsp,RSP-\ref
/*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
/*CFI_REL_OFFSET cs,CS-\ref*/
CFI_REL_OFFSET rip,RIP-\ref
.endm
/* initial frame state for interrupts (and exceptions without error code) */
#define INTR_FRAME _frame RIP
/* initial frame state for exceptions with error code (and interrupts with
vector already pushed) */
#define XCPT_FRAME _frame ORIG_RAX
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Interrupt entry/exit.
*
* Interrupt entry points save only callee clobbered registers in fast path.
*
* Entry runs with interrupts off.
*/
/* 0(%rsp): interrupt number */
.macro interrupt func
cld
SAVE_ARGS
leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:35 -07:00
pushq %rbp
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rbp, 0
movq %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
testl $3,CS(%rdi)
je 1f
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS
[PATCH] Fix a irqcount comment in entry.S Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:39 -07:00
/* irqcount is used to check if a CPU is already on an interrupt
stack or not. While this is essentially redundant with preempt_count
it is a little cheaper to use a separate counter in the PDA
(short of moving irq_enter into assembly, which would be too
much work) */
1: incl %gs:pda_irqcount
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:35 -07:00
cmoveq %gs:pda_irqstackptr,%rsp
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
push %rbp # backlink for old unwinder
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* We entered an interrupt context - irqs are off:
*/
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call \func
.endm
ENTRY(common_interrupt)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
XCPT_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
interrupt do_IRQ
/* 0(%rsp): oldrsp-ARGOFFSET */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
ret_from_intr:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
[PATCH] x86_64: Small assembly improvements Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:48 -07:00
decl %gs:pda_irqcount
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:35 -07:00
leaveq
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_DEF_CFA_REGISTER rsp
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:35 -07:00
CFI_ADJUST_CFA_OFFSET -8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
exit_intr:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
testl $3,CS-ARGOFFSET(%rsp)
je retint_kernel
/* Interrupt came from user space */
/*
* Has a correct top of stack, but a partial stack frame
* %rcx: thread info. Interrupts off.
*/
retint_with_reschedule:
movl $_TIF_WORK_MASK,%edi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
retint_check:
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
LOCKDEP_SYS_EXIT_IRQ
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
andl %edi,%edx
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_REMEMBER_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnz retint_careful
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
retint_swapgs: /* return to user-space */
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* The iretq could re-enable interrupts:
*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_IRETQ
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
jmp restore_args
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
retint_restore_args: /* return to kernel space */
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* The iretq could re-enable interrupts:
*/
TRACE_IRQS_IRETQ
restore_args:
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 15:24:08 -07:00
RESTORE_ARGS 0,8,0
x86: don't make irq_return global Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-13 14:29:53 -07:00
irq_return:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
INTERRUPT_RETURN
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 15:24:08 -07:00
.section __ex_table, "a"
.quad irq_return, bad_iret
.previous
#ifdef CONFIG_PARAVIRT
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENTRY(native_iret)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
iretq
.section __ex_table,"a"
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
.quad native_iret, bad_iret
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.previous
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 15:24:08 -07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.section .fixup,"ax"
bad_iret:
x86: make traps on entry code be debuggable in user space, 64-bit Unify the x86-64 behavior for 32-bit processes that set bogus %cs/%ss values (the only ones that can fault in iret) match what the native i386 behavior is. (do not kill the task via do_exit but generate a SIGSEGV signal) [ tglx@linutronix.de: build fix ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 14:39:43 -07:00
/*
* The iret traps when the %cs or %ss being restored is bogus.
* We've lost the original trap vector and error code.
* #GPF is the most likely one to get for an invalid selector.
* So pretend we completed the iret and took the #GPF in user mode.
*
* We are now running with the kernel GS after exception recovery.
* But error_entry expects us to have user GS to match the user %cs,
* so swap back.
*/
pushq $0
SWAPGS
jmp general_protection
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
.previous
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
/* edi: workmask, edx: work */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
retint_careful:
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_RESTORE_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call schedule
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jmp retint_check
retint_signal:
sched: high-res preemption tick Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 13:08:29 -07:00
testl $_TIF_DO_NOTIFY_MASK,%edx
[PATCH] x86_64: Readd missing tests in entry.S Cleans up the system exit call slightly and synchronizes with my tree again. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 21:53:19 -07:00
jz retint_swapgs
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_REST
movq $-1,ORIG_RAX(%rsp)
[PATCH] x86_64: Small assembly improvements Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:48 -07:00
xorl %esi,%esi # oldset
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq %rsp,%rdi # &pt_regs
call do_notify_resume
RESTORE_REST
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
[PATCH] x86_64: interrupt handling fix - Initialize workmask correctly on interrupt signal handling - Readd missing cli's in the interrupt return path. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:51 -07:00
GET_THREAD_INFO(%rcx)
x86_64: fix delayed signals On three of the several paths in entry_64.S that call do_notify_resume() on the way back to user mode, we fail to properly check again for newly-arrived work that requires another call to do_notify_resume() before going to user mode. These paths set the mask to check only _TIF_NEED_RESCHED, but this is wrong. The other paths that lead to do_notify_resume() do this correctly already, and entry_32.S does it correctly in all cases. All paths back to user mode have to check all the _TIF_WORK_MASK flags at the last possible stage, with interrupts disabled. Otherwise, we miss any flags (TIF_SIGPENDING for example) that were set any time after we entered do_notify_resume(). More work flags can be set (or left set) synchronously inside do_notify_resume(), as TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs (which then send an asynchronous interrupt). There are many different scenarios that could hit this bug, most of them races. The simplest one to demonstrate does not require any race: when one signal has done handler setup at the check before returning from a syscall, and there is another signal pending that should be handled. The second signal's handler should interrupt the first signal handler before it actually starts (so the interrupted PC is still at the handler's entry point). Instead, it runs away until the next kernel entry (next syscall, tick, etc). This test behaves correctly on 32-bit kernels, and fails on 64-bit (either 32-bit or 64-bit test binary). With this fix, it works. #define _GNU_SOURCE #include <stdio.h> #include <signal.h> #include <string.h> #include <sys/ucontext.h> #ifndef REG_RIP #define REG_RIP REG_EIP #endif static sig_atomic_t hit1, hit2; static void handler (int sig, siginfo_t *info, void *ctx) { ucontext_t *uc = ctx; if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler) { if (sig == SIGUSR1) hit1 = 1; else hit2 = 1; } printf ("%s at %#lx\n", strsignal (sig), uc->uc_mcontext.gregs[REG_RIP]); } int main (void) { struct sigaction sa; sigset_t set; sigemptyset (&sa.sa_mask); sa.sa_flags = SA_SIGINFO; sa.sa_sigaction = &handler; if (sigaction (SIGUSR1, &sa, NULL) || sigaction (SIGUSR2, &sa, NULL)) return 2; sigemptyset (&set); sigaddset (&set, SIGUSR1); sigaddset (&set, SIGUSR2); if (sigprocmask (SIG_BLOCK, &set, NULL)) return 3; printf ("main at %p, handler at %p\n", &main, &handler); raise (SIGUSR1); raise (SIGUSR2); if (sigprocmask (SIG_UNBLOCK, &set, NULL)) return 4; if (hit1 + hit2 == 1) { puts ("PASS"); return 0; } puts ("FAIL"); return 1; } Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 14:50:39 -07:00
jmp retint_with_reschedule
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifdef CONFIG_PREEMPT
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
[PATCH] Add proper alignment to ENTRY Previously it didn't align. Use the same one as the C compiler in blended mode, which is good for K8 and Core2 and doesn't hurt on P4. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:29 -07:00
ENTRY(retint_kernel)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
cmpl $0,TI_preempt_count(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnz retint_restore_args
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
bt $TIF_NEED_RESCHED,TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
call preempt_schedule_irq
jmp exit_intr
#endif
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(common_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* APIC interrupts.
*/
.macro apicinterrupt num,func
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
INTR_FRAME
[PATCH] x86: increase interrupt vector range Remove the limit of 256 interrupt vectors by changing the value stored in orig_{e,r}ax to be the complemented interrupt vector. The orig_{e,r}ax needs to be < 0 to allow the signal code to distinguish between return from interrupt and return from syscall. With this change applied, NR_IRQS can be > 256. Xen extends the IRQ numbering space to include room for dynamically allocated virtual interrupts (in the range 256-511), which requires a more permissive interface to do_IRQ. Signed-off-by: Ian Pratt <ian.pratt@xensource.com> Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 02:53:44 -07:00
pushq $~(\num)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
interrupt \func
jmp ret_from_intr
CFI_ENDPROC
.endm
ENTRY(thermal_interrupt)
apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(thermal_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86_64: Support for AMD specific MCE Threshold. MC4_MISC - DRAM Errors Threshold Register realized under AMD K8 Rev F. This register is used to count correctable and uncorrectable ECC errors that occur during DRAM read operations. The user may interface through sysfs files in order to change the threshold configuration. bank%d/error_count - reads current error count, write to clear. bank%d/interrupt_enable - set/clear interrupt enable. bank%d/threshold_limit - read/write the threshold limit. APIC vector 0xF9 in hw_irq.h. 5 software defined bank ids in mce.h. new apic.c function to setup threshold apic lvt. defaults to interrupt off, count enabled, and threshold limit max. sysfs interface created on /sys/devices/system/threshold. AK: added some ifdefs to make it compile on UP Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 09:25:53 -07:00
ENTRY(threshold_interrupt)
apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(threshold_interrupt)
[PATCH] x86_64: Support for AMD specific MCE Threshold. MC4_MISC - DRAM Errors Threshold Register realized under AMD K8 Rev F. This register is used to count correctable and uncorrectable ECC errors that occur during DRAM read operations. The user may interface through sysfs files in order to change the threshold configuration. bank%d/error_count - reads current error count, write to clear. bank%d/interrupt_enable - set/clear interrupt enable. bank%d/threshold_limit - read/write the threshold limit. APIC vector 0xF9 in hw_irq.h. 5 software defined bank ids in mce.h. new apic.c function to setup threshold apic lvt. defaults to interrupt off, count enabled, and threshold limit max. sysfs interface created on /sys/devices/system/threshold. AK: added some ifdefs to make it compile on UP Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 09:25:53 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifdef CONFIG_SMP
ENTRY(reschedule_interrupt)
apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(reschedule_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86-64: Make remote TLB flush more scalable Instead of using a global spinlock to protect the state of the remote TLB flush use a lock and state for each sending CPU. To tell the receiver where to look for the state use 8 different call vectors. Each CPU uses a specific vector to trigger flushes on other CPUs. Depending on the received vector the target CPUs look into the right per cpu variable for the flush data. When the system has more than 8 CPUs they are hashed to the 8 available vectors. The limited global vector space forces us to this right now. In future when interrupts are split into per CPU domains this could be fixed, at the cost of needing more IPIs in flat mode. Also some minor cleanup in the smp flush code and remove some outdated debug code. Requires patch to move cpu_possible_map setup earlier. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
.macro INVALIDATE_ENTRY num
ENTRY(invalidate_interrupt\num)
apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(invalidate_interrupt\num)
[PATCH] x86-64: Make remote TLB flush more scalable Instead of using a global spinlock to protect the state of the remote TLB flush use a lock and state for each sending CPU. To tell the receiver where to look for the state use 8 different call vectors. Each CPU uses a specific vector to trigger flushes on other CPUs. Depending on the received vector the target CPUs look into the right per cpu variable for the flush data. When the system has more than 8 CPUs they are hashed to the 8 available vectors. The limited global vector space forces us to this right now. In future when interrupts are split into per CPU domains this could be fixed, at the cost of needing more IPIs in flat mode. Also some minor cleanup in the smp flush code and remove some outdated debug code. Requires patch to move cpu_possible_map setup earlier. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
.endm
INVALIDATE_ENTRY 0
INVALIDATE_ENTRY 1
INVALIDATE_ENTRY 2
INVALIDATE_ENTRY 3
INVALIDATE_ENTRY 4
INVALIDATE_ENTRY 5
INVALIDATE_ENTRY 6
INVALIDATE_ENTRY 7
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(call_function_interrupt)
apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(call_function_interrupt)
x86: convert to generic helpers for IPI function calls This converts x86, x86-64, and xen to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 02:21:54 -07:00
ENTRY(call_function_single_interrupt)
apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
END(call_function_single_interrupt)
[PATCH] x86_64 irq: Safely cleanup an irq after moving it. The problem: After moving an interrupt when is it safe to teardown the data structures for receiving the interrupt at the old location? With a normal pci device it is possible to issue a read to a device to flush all posted writes. This does not work for the oldest ioapics because they are on a 3-wire apic bus which is a completely different data path. For some more modern ioapics when everything is using front side bus delivery you can flush interrupts by simply issuing a read to the ioapic. For other modern ioapics emperical testing has shown that this does not work. So it appears the only reliable way to know the last of the irqs from an ioapic have been received from before the ioapic was reprogrammed is to received the first irq from the ioapic from after it was reprogrammed. Once we know the last irq message has been received from an ioapic into a local apic we then need to know that irq message has been processed through the local apics. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-23 04:40:58 -07:00
ENTRY(irq_move_cleanup_interrupt)
apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
END(irq_move_cleanup_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif
ENTRY(apic_timer_interrupt)
apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(apic_timer_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
x86, SGI UV: TLB shootdown using broadcast assist unit TLB shootdown for SGI UV. Depends on patch (in tip/x86/irq): x86-update-macros-used-by-uv-platform.patch Jack Steiner May 29 This patch provides the ability to flush TLB's in cpu's that are not on the local node. The hardware mechanism for distributing the flush messages is the UV's "broadcast assist unit". The hook to intercept TLB shootdown requests is a 2-line change to native_flush_tlb_others() (arch/x86/kernel/tlb_64.c). This code has been tested on a hardware simulator. The real hardware is not yet available. The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics. The use of /sys was considered, but would have required the use of many /sys files. The debugfs was also considered, but these statistics should be available on an ongoing basis, not just for debugging. Issues to be fixed later: - The IRQ for the messaging interrupt is currently hardcoded as 200 (see UV_BAU_MESSAGE). It should be dynamically assigned in the future. - The use of appropriate udelay()'s is untested, as they are a problem in the simulator. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 06:56:14 -07:00
ENTRY(uv_bau_message_intr1)
apicinterrupt 220,uv_bau_message_interrupt
END(uv_bau_message_intr1)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(error_interrupt)
apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(error_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(spurious_interrupt)
apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(spurious_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Exception entry points.
*/
.macro zeroentry sym
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
INTR_FRAME
x86/paravirt, 64-bit: add adjust_exception_frame 64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:31 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $0 /* push error code/oldrax */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rax /* push real oldrax to the rdi slot */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: a few missing entry.S annotations Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:05 -07:00
CFI_REL_OFFSET rax,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
leaq \sym(%rip),%rax
jmp error_entry
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ENDPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.endm
.macro errorentry sym
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
XCPT_FRAME
x86/paravirt, 64-bit: add adjust_exception_frame 64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:31 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq %rax
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: a few missing entry.S annotations Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:05 -07:00
CFI_REL_OFFSET rax,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
leaq \sym(%rip),%rax
jmp error_entry
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ENDPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.endm
/* error code is on the stack already */
/* handle NMI like exceptions that can happen everywhere */
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
.macro paranoidentry sym, ist=0, irqtrace=1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
SAVE_ALL
cld
movl $1,%ebx
movl $MSR_GS_BASE,%ecx
rdmsr
testl %edx,%edx
js 1f
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
xorl %ebx,%ebx
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
1:
.if \ist
movq %gs:pda_data_offset, %rbp
.endif
movq %rsp,%rdi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq ORIG_RAX(%rsp),%rsi
movq $-1,ORIG_RAX(%rsp)
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
.if \ist
[PATCH] x86_64: Allow nesting of int3 by default for kprobes This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 17:56:39 -07:00
subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
.endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call \sym
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
.if \ist
[PATCH] x86_64: Allow nesting of int3 by default for kprobes This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 17:56:39 -07:00
addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
.endif
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
.if \irqtrace
TRACE_IRQS_OFF
.endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.endm
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
/*
* "Paranoid" exit path from exception stack.
* Paranoid because this is used by NMIs and cannot take
* any kernel state for granted.
* We don't do kernel preemption checks here, because only
* NMI should be common and it does not enable IRQs and
* cannot get reschedule ticks.
*
* "trace" is 0 for the NMI handler only, because irq-tracing
* is fundamentally NMI-unsafe. (we cannot change the soft and
* hard flags at once, atomically)
*/
.macro paranoidexit trace=1
/* ebx: no swapgs flag */
paranoid_exit\trace:
testl %ebx,%ebx /* swapgs needed? */
jnz paranoid_restore\trace
testl $3,CS(%rsp)
jnz paranoid_userspace\trace
paranoid_swapgs\trace:
[PATCH] Add a missing check for irq flags tracing in NMI NMIs are not supposed to track the irq flags, but TRACE_IRQS_IRETQ did it anyways. Add a check. Cc: mingo@elte.hu Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:37 -07:00
.if \trace
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_IRETQ 0
[PATCH] Add a missing check for irq flags tracing in NMI NMIs are not supposed to track the irq flags, but TRACE_IRQS_IRETQ did it anyways. Add a check. Cc: mingo@elte.hu Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:37 -07:00
.endif
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS_UNSAFE_STACK
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
paranoid_restore\trace:
RESTORE_ALL 8
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 15:24:08 -07:00
jmp irq_return
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
movl TI_flags(%rcx),%ebx
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs\trace
movq %rsp,%rdi /* &pt_regs */
call sync_regs
movq %rax,%rsp /* switch stack for scheduling */
testl $_TIF_NEED_RESCHED,%ebx
jnz paranoid_schedule\trace
movl %ebx,%edx /* arg3: thread flags */
.if \trace
TRACE_IRQS_ON
.endif
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
.if \trace
TRACE_IRQS_OFF
.endif
jmp paranoid_userspace\trace
paranoid_schedule\trace:
.if \trace
TRACE_IRQS_ON
.endif
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
ENABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
call schedule
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
.if \trace
TRACE_IRQS_OFF
.endif
jmp paranoid_userspace\trace
CFI_ENDPROC
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Exception entry point. This expects an error code/orig_rax on the stack
* and the exception handler in %rax.
*/
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_ENTRY(error_entry)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
_frame RDI
[PATCH] x86-64: a few missing entry.S annotations Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:05 -07:00
CFI_REL_OFFSET rax,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* rdi slot contains rax, oldrax contains error code */
cld
subq $14*8,%rsp
CFI_ADJUST_CFA_OFFSET (14*8)
movq %rsi,13*8(%rsp)
CFI_REL_OFFSET rsi,RSI
movq 14*8(%rsp),%rsi /* load rax from rdi slot */
[PATCH] x86-64: a few missing entry.S annotations Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:05 -07:00
CFI_REGISTER rax,rsi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq %rdx,12*8(%rsp)
CFI_REL_OFFSET rdx,RDX
movq %rcx,11*8(%rsp)
CFI_REL_OFFSET rcx,RCX
movq %rsi,10*8(%rsp) /* store rax */
CFI_REL_OFFSET rax,RAX
movq %r8, 9*8(%rsp)
CFI_REL_OFFSET r8,R8
movq %r9, 8*8(%rsp)
CFI_REL_OFFSET r9,R9
movq %r10,7*8(%rsp)
CFI_REL_OFFSET r10,R10
movq %r11,6*8(%rsp)
CFI_REL_OFFSET r11,R11
movq %rbx,5*8(%rsp)
CFI_REL_OFFSET rbx,RBX
movq %rbp,4*8(%rsp)
CFI_REL_OFFSET rbp,RBP
movq %r12,3*8(%rsp)
CFI_REL_OFFSET r12,R12
movq %r13,2*8(%rsp)
CFI_REL_OFFSET r13,R13
movq %r14,1*8(%rsp)
CFI_REL_OFFSET r14,R14
movq %r15,(%rsp)
CFI_REL_OFFSET r15,R15
xorl %ebx,%ebx
testl $3,CS(%rsp)
je error_kernelspace
error_swapgs:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
error_sti:
movq %rdi,RDI(%rsp)
[PATCH] x86-64: a few missing entry.S annotations Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:05 -07:00
CFI_REL_OFFSET rdi,RDI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movq %rsp,%rdi
movq ORIG_RAX(%rsp),%rsi /* get error code */
movq $-1,ORIG_RAX(%rsp)
call *%rax
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
/* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
error_exit:
movl %ebx,%eax
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
RESTORE_REST
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
GET_THREAD_INFO(%rcx)
testl %eax,%eax
jne retint_kernel
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
LOCKDEP_SYS_EXIT_IRQ
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 07:19:35 -07:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 13:11:12 -07:00
jmp retint_swapgs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ENDPROC
error_kernelspace:
incl %ebx
/* There are two places in the kernel that can potentially fault with
usergs. Handle them here. The exception handlers after
iret run with kernel gs again, so don't set the user space flag.
B stepping K8s sometimes report an truncated RIP for IRET
exceptions returning to compat mode. Check for these here too. */
x86: don't destroy %rbp on kernel-mode faults From the code: "B stepping K8s sometimes report an truncated RIP for IRET exceptions returning to compat mode. Check for these here too." The code then proceeds to truncate the upper 32 bits of %rbp. This means that when do_page_fault() is finally called, its prologue, do_page_fault: push %rbp movl %rsp, %rbp will put the truncated base pointer on the stack. This means that the stack tracer will not be able to follow the base-pointer changes and will see all subsequent stack frames as unreliable. This patch changes the code to use a different register (%rcx) for the checking and leaves %rbp untouched. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 08:22:17 -07:00
leaq irq_return(%rip),%rcx
cmpq %rcx,RIP(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
je error_swapgs
x86: don't destroy %rbp on kernel-mode faults From the code: "B stepping K8s sometimes report an truncated RIP for IRET exceptions returning to compat mode. Check for these here too." The code then proceeds to truncate the upper 32 bits of %rbp. This means that when do_page_fault() is finally called, its prologue, do_page_fault: push %rbp movl %rsp, %rbp will put the truncated base pointer on the stack. This means that the stack tracer will not be able to follow the base-pointer changes and will see all subsequent stack frames as unreliable. This patch changes the code to use a different register (%rcx) for the checking and leaves %rbp untouched. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 08:22:17 -07:00
movl %ecx,%ecx /* zero extend */
cmpq %rcx,RIP(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
je error_swapgs
cmpq $gs_change,RIP(%rsp)
je error_swapgs
jmp error_sti
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(error_entry)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Reload gs selector with exception handling */
/* edi: new selector */
x86/paravirt, 64-bit: make load_gs_index() a paravirt operation Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:32 -07:00
ENTRY(native_load_gs_index)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_STARTPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushf
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
SWAPGS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
gs_change:
movl %edi,%gs
2: mfence /* workaround */
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
popf
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ret
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ENDPROC
x86/paravirt, 64-bit: make load_gs_index() a paravirt operation Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 21:19:32 -07:00
ENDPROC(native_load_gs_index)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.section __ex_table,"a"
.align 8
.quad gs_change,bad_gs
.previous
.section .fixup,"ax"
/* running with kernelgs */
bad_gs:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 05:32:08 -07:00
SWAPGS /* switch back to user gs */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
xorl %eax,%eax
movl %eax,%gs
jmp 2b
.previous
/*
* Create a kernel thread.
*
* C extern interface:
* extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
*
* asm input arguments:
* rdi: fn, rsi: arg, rdx: flags
*/
ENTRY(kernel_thread)
CFI_STARTPROC
FAKE_STACK_FRAME $child_rip
SAVE_ALL
# rdi: flags, rsi: usp, rdx: will be &pt_regs
movq %rdx,%rdi
orq kernel_thread_flags(%rip),%rdi
movq $-1, %rsi
movq %rsp, %rdx
xorl %r8d,%r8d
xorl %r9d,%r9d
# clone now
call do_fork
movq %rax,RAX(%rsp)
xorl %edi,%edi
/*
* It isn't worth to check for reschedule here,
* so internally to the x86_64 port you can rely on kernel_thread()
* not to reschedule the child before returning, this avoids the need
* of hacks for example to fork off the per-CPU idle tasks.
* [Hopefully no generic code relies on the reschedule -AK]
*/
RESTORE_ALL
UNFAKE_STACK_FRAME
ret
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
ENDPROC(kernel_thread)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
child_rip:
[PATCH] x86_64: Add kernel thread stack frame termination for properly stopping stack unwinds. One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30 10:37:08 -07:00
pushq $0 # fake return address
CFI_STARTPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Here we are in the child and the registers are set as they were
* at kernel_thread() invocation in the parent.
*/
movq %rdi, %rax
movq %rsi, %rdi
call *%rax
# exit
x86: return correct error code from child_rip in x86_64 entry.S Right now register edi is just cleared before calling do_exit. That is wrong because correct return value will be ignored. Value from rax should be copied to rdi instead of clearing edi. AK: changed to 32bit move because it's strictly an int [ tglx: arch/x86 adaptation ] Signed-off-by: Andrey Mirkin <major@openvz.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 09:04:33 -07:00
mov %eax, %edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call do_exit
[PATCH] x86_64: Add kernel thread stack frame termination for properly stopping stack unwinds. One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30 10:37:08 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
ENDPROC(child_rip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
*
* C extern interface:
* extern long execve(char *name, char **argv, char **envp)
*
* asm input arguments:
* rdi: name, rsi: argv, rdx: envp
*
* We want to fallback into:
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 04:55:57 -07:00
* extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* do_sys_execve asm fallback arguments:
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 04:55:57 -07:00
* rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
[PATCH] rename the provided execve functions to kernel_execve Some architectures provide an execve function that does not set errno, but instead returns the result code directly. Rename these to kernel_execve to get the right semantics there. Moreover, there is no reasone for any of these architectures to still provide __KERNEL_SYSCALLS__ or _syscallN macros, so remove these right away. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andi Kleen <ak@muc.de> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 02:18:31 -07:00
ENTRY(kernel_execve)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_STARTPROC
FAKE_STACK_FRAME $0
SAVE_ALL
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 04:55:57 -07:00
movq %rsp,%rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
call sys_execve
movq %rax, RAX(%rsp)
RESTORE_REST
testq %rax,%rax
je int_ret_from_sys_call
RESTORE_ARGS
UNFAKE_STACK_FRAME
ret
CFI_ENDPROC
[PATCH] rename the provided execve functions to kernel_execve Some architectures provide an execve function that does not set errno, but instead returns the result code directly. Rename these to kernel_execve to get the right semantics there. Moreover, there is no reasone for any of these architectures to still provide __KERNEL_SYSCALLS__ or _syscallN macros, so remove these right away. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andi Kleen <ak@muc.de> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 02:18:31 -07:00
ENDPROC(kernel_execve)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 15:19:28 -07:00
KPROBE_ENTRY(page_fault)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
errorentry do_page_fault
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(page_fault)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(coprocessor_error)
zeroentry do_coprocessor_error
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(coprocessor_error)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(simd_coprocessor_error)
zeroentry do_simd_coprocessor_error
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(simd_coprocessor_error)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(device_not_available)
zeroentry math_state_restore
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(device_not_available)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* runs on exception stack */
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 15:19:28 -07:00
KPROBE_ENTRY(debug)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
INTR_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $0
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86_64: Allow nesting of int3 by default for kprobes This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 17:56:39 -07:00
paranoidentry do_debug, DEBUG_STACK
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
paranoidexit
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(debug)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* runs on exception stack */
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:41 -07:00
KPROBE_ENTRY(nmi)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
INTR_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $-1
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
paranoidentry do_nmi, 0, 0
#ifdef CONFIG_TRACE_IRQFLAGS
paranoidexit 0
#else
jmp paranoid_exit1
CFI_ENDPROC
#endif
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(nmi)
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:03 -07:00
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 15:19:28 -07:00
KPROBE_ENTRY(int3)
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
INTR_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
pushq $0
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86_64: Allow nesting of int3 by default for kprobes This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 17:56:39 -07:00
paranoidentry do_int3, DEBUG_STACK
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
jmp paranoid_exit1
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:43:00 -07:00
CFI_ENDPROC
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(int3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(overflow)
zeroentry do_overflow
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(overflow)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(bounds)
zeroentry do_bounds
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(bounds)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(invalid_op)
zeroentry do_invalid_op
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(invalid_op)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(coprocessor_segment_overrun)
zeroentry do_coprocessor_segment_overrun
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(coprocessor_segment_overrun)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* runs on exception stack */
ENTRY(double_fault)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
XCPT_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
paranoidentry do_double_fault
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
jmp paranoid_exit1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(double_fault)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(invalid_TSS)
errorentry do_invalid_TSS
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(invalid_TSS)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(segment_not_present)
errorentry do_segment_not_present
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(segment_not_present)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* runs on exception stack */
ENTRY(stack_segment)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
XCPT_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
paranoidentry do_stack_segment
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
jmp paranoid_exit1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(stack_segment)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 15:19:28 -07:00
KPROBE_ENTRY(general_protection)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
errorentry do_general_protection
[PATCH] x86: error_code is not safe for kprobes This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:34 -07:00
KPROBE_END(general_protection)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(alignment_check)
errorentry do_alignment_check
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(alignment_check)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(divide_error)
zeroentry do_divide_error
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(divide_error)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ENTRY(spurious_interrupt_bug)
zeroentry do_spurious_interrupt_bug
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(spurious_interrupt_bug)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifdef CONFIG_X86_MCE
/* runs on exception stack */
ENTRY(machine_check)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
INTR_FRAME
x86_64: adjust exception frame on paranoid exceptions Exceptions using paranoidentry need to have their exception frames adjusted explicitly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-12 02:22:12 -07:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_machine_check
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 00:24:45 -07:00
jmp paranoid_exit1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
END(machine_check)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
/* Call softirq on interrupt stack. Interrupts are off. */
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:49 -07:00
ENTRY(call_softirq)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_STARTPROC
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
push %rbp
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rbp,0
mov %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:49 -07:00
incl %gs:pda_irqcount
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
cmove %gs:pda_irqstackptr,%rsp
push %rbp # backlink for old unwinder
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:49 -07:00
call __do_softirq
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
leaveq
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_DEF_CFA_REGISTER rsp
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 13:37:28 -07:00
CFI_ADJUST_CFA_OFFSET -8
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:15:49 -07:00
decl %gs:pda_irqcount
ret
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:49:24 -07:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:56:55 -07:00
ENDPROC(call_softirq)
x86_64: Ignore compat mode SYSCALL when IA32_EMULATION is not defined Previously a program could switch to a compat mode segment and then execute SYSCALL and it would jump to an uninitialized MSR and crash the kernel. Instead supply a dummy target for this case. Pointed out by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-22 17:29:25 -07:00
KPROBE_ENTRY(ignore_sysret)
CFI_STARTPROC
mov $-ENOSYS,%eax
sysret
CFI_ENDPROC
ENDPROC(ignore_sysret)
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:06:49 -07:00
#ifdef CONFIG_XEN
ENTRY(xen_hypervisor_callback)
zeroentry xen_do_hypervisor_callback
END(xen_hypervisor_callback)
/*
# A note on the "critical region" in our callback handler.
# We want to avoid stacking callback handlers due to events occurring
# during handling of the last event. To do this, we keep events disabled
# until we've done all processing. HOWEVER, we must enable events before
# popping the stack frame (can't be done atomically) and so it would still
# be possible to get enough handler activations to overflow the stack.
# Although unlikely, bugs of that kind are hard to track down, so we'd
# like to avoid the possibility.
# So, on entry to the handler we detect whether we interrupted an
# existing activation in its critical region -- if so, we pop the current
# activation and restart the handler using the previous one.
*/
ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
CFI_STARTPROC
/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
see the correct pointer to the pt_regs */
movq %rdi, %rsp # we don't return, adjust the stack frame
CFI_ENDPROC
CFI_DEFAULT_STACK
11: incl %gs:pda_irqcount
movq %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
cmovzq %gs:pda_irqstackptr,%rsp
pushq %rbp # backlink for old unwinder
call xen_evtchn_do_upcall
popq %rsp
CFI_DEF_CFA_REGISTER rsp
decl %gs:pda_irqcount
jmp error_exit
CFI_ENDPROC
END(do_hypervisor_callback)
/*
# Hypervisor uses this for application faults while it executes.
# We get here for two reasons:
# 1. Fault while reloading DS, ES, FS or GS
# 2. Fault while executing IRET
# Category 1 we do not need to fix up as Xen has already reloaded all segment
# registers that could be reloaded and zeroed the others.
# Category 2 we fix up by killing the current process. We cannot use the
# normal Linux return path in this case because if we use the IRET hypercall
# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
# We distinguish between categories by comparing each saved segment register
# with its current contents: any discrepancy means we in category 1.
*/
ENTRY(xen_failsafe_callback)
xen64: implement failsafe callback Implement the failsafe callback, so that iret and segment register load exceptions are reported to the kernel. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:07:09 -07:00
framesz = (RIP-0x30) /* workaround buggy gas */
_frame framesz
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:06:49 -07:00
CFI_REL_OFFSET rcx, 0
CFI_REL_OFFSET r11, 8
movw %ds,%cx
cmpw %cx,0x10(%rsp)
CFI_REMEMBER_STATE
jne 1f
movw %es,%cx
cmpw %cx,0x18(%rsp)
jne 1f
movw %fs,%cx
cmpw %cx,0x20(%rsp)
jne 1f
movw %gs,%cx
cmpw %cx,0x28(%rsp)
jne 1f
/* All segments match their saved values => Category 2 (Bad IRET). */
movq (%rsp),%rcx
CFI_RESTORE rcx
movq 8(%rsp),%r11
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
xen64: implement failsafe callback Implement the failsafe callback, so that iret and segment register load exceptions are reported to the kernel. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:07:09 -07:00
pushq $0
CFI_ADJUST_CFA_OFFSET 8
pushq %r11
CFI_ADJUST_CFA_OFFSET 8
pushq %rcx
CFI_ADJUST_CFA_OFFSET 8
jmp general_protection
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:06:49 -07:00
CFI_RESTORE_STATE
1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
movq (%rsp),%rcx
CFI_RESTORE rcx
movq 8(%rsp),%r11
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
pushq $0
CFI_ADJUST_CFA_OFFSET 8
SAVE_ALL
jmp error_exit
CFI_ENDPROC
END(xen_failsafe_callback)
#endif /* CONFIG_XEN */
Copy Permalink