kevin/linux
1
Fork 0
Code
98ac216269
linux/drivers/mmc/Kconfig

129 lines
3.7 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
# MMC subsystem configuration
#
menu "MMC/SD Card support"
config MMC
tristate "MMC support"
help
MMC is the "multi-media card" bus protocol.
If you want MMC support, you should say Y here and also
to the specific driver for your MMC interface.
config MMC_DEBUG
bool "MMC debugging"
depends on MMC != n
help
This is an option for use by developers; most people should
say N here. This enables MMC core and driver debugging.
config MMC_BLOCK
tristate "MMC block device driver"
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 11:45:40 -07:00
depends on MMC && BLOCK
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
default y
help
Say Y here to enable the MMC block device driver support.
This provides a block device driver, which you can use to
mount the filesystem. Almost everyone wishing MMC support
should say Y or M here.
config MMC_ARMMMCI
tristate "ARM AMBA Multimedia Card Interface support"
depends on ARM_AMBA && MMC
help
This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
Interface (PL180 and PL181) support. If you have an ARM(R)
platform with a Multimedia Card slot, say Y or M here.
If unsure, say N.
config MMC_PXA
trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255 PXA MMC driver supports not only PXA255 but also PXA250 and newer ones Signed-off-by: Marcin Juszkiewicz <hrw@openembedded.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-11-16 14:39:10 -07:00
tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
depends on ARCH_PXA && MMC
help
This selects the Intel(R) PXA(R) Multimedia card Interface.
If you have a PXA(R) platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
[PATCH] mmc: Secure Digital Host Controller Interface driver Driver for the Secure Digital Host Controller Interface specification. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 04:18:17 -07:00
config MMC_SDHCI
tristate "Secure Digital Host Controller Interface support (EXPERIMENTAL)"
depends on PCI && MMC && EXPERIMENTAL
help
This select the generic Secure Digital Host Controller Interface.
It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
and Toshiba(R). Most controllers found in laptops are of this type.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
[MMC] Add OMAP MMC host driver Adds OMAP MMC driver. Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Carlos Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-29 01:21:00 -07:00
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP && MMC
select TPS65010 if MACH_OMAP_H2
help
This selects the TI OMAP Multimedia card Interface.
If you have an OMAP board with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
[PATCH] MMC: wbsd update Updates to the wbsd driver. * Fix to handle DAT3 card detection. * Fixed bug which could cause large writes to stall in FIFO mode. * Plug 'n Play support. In most cases you need ACPI PNP for this to work. * Uses generic DMA API (ISA dependency removed).
2005-05-08 11:35:27 -07:00
depends on MMC && ISA_DMA_API
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
If you have a machine with a integrated W83L518D or W83L519D
SD/MMC card reader, say Y or M here.
If unsure, say N.
Au1[12]00 mmc driver. Only tested on the Au1200 at this point though it should work on the Au1100 as well. Updated defconfig to include driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-09-20 23:18:27 -07:00
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
[MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy The driver is selectable on other than Au1200 Alchemy systems but won't build nor work - there is no MMC hw. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-04 09:40:58 -07:00
depends on MMC && SOC_AU1200
Au1[12]00 mmc driver. Only tested on the Au1200 at this point though it should work on the Au1100 as well. Updated defconfig to include driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-09-20 23:18:27 -07:00
help
This selects the AMD Alchemy(R) Multimedia card interface.
[MMC] Remove extra character in AU1XXX MMC Kconfig entry An obvious vi fat finger on my part. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 15:23:05 -07:00
If you have a Alchemy platform with a MMC slot, say Y or M here.
Au1[12]00 mmc driver. Only tested on the Au1200 at this point though it should work on the Au1100 as well. Updated defconfig to include driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-09-20 23:18:27 -07:00
If unsure, say N.
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 06:51:13 -07:00
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
depends on ARCH_AT91 && MMC
[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver) Patch from Andrew Victor This patch adds support for the MMC/SD card interface on the Atmel AT91RM9200 processor. Original driver was by Nick Randell, but a number of people have subsequently worked on it. It's currently maintained by Malcolm Noyes. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 11:18:51 -07:00
help
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 06:51:13 -07:00
This selects the AT91 MCI controller.
[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver) Patch from Andrew Victor This patch adds support for the MMC/SD card interface on the Atmel AT91RM9200 processor. Original driver was by Nick Randell, but a number of people have subsequently worked on it. It's currently maintained by Malcolm Noyes. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 11:18:51 -07:00
If unsure, say N.
[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1 Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 11:27:07 -07:00
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
depends on ARCH_IMX && MMC
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 02:15:38 -07:00
config MMC_TIFM_SD
tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
[PATCH] TIFM should depend on PCI - TIFM_CORE leads to use of pci primitives Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:05:42 -07:00
depends on MMC && EXPERIMENTAL && PCI
[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile Signed-off-by: Alex Dubov <oakad@yahoo.com> Cc: Daniel Qarras <dqarras@yahoo.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 02:15:38 -07:00
select TIFM_CORE
help
Say Y here if you want to be able to access MMC/SD cards with
the Texas Instruments(R) Flash Media card reader, found in many
laptops.
This option 'selects' (turns on, enables) 'TIFM_CORE', but you
probably also need appropriate card reader host adapter, such as
'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
(TIFM_7XX1)'.
To compile this driver as a module, choose M here: the
module will be called tifm_sd.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
endmenu
Copy Permalink