kevin/linux
1
Fork 0
Code
94af122098
linux/drivers/usb/host/xhci-mem.c

1345 lines
40 KiB
C
Raw Normal View History

USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/usb.h>
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
#include <linux/pci.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 01:04:11 -07:00
#include <linux/slab.h>
USB: xhci: Make xhci-mem.c include linux/dmapool.h xhci-mem.c includes calls to dma_pool_alloc() and other functions defined in linux/dmapool.h. Make sure to include that header file. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:06:56 -07:00
#include <linux/dmapool.h>
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
#include "xhci.h"
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/*
* Allocates a generic ring segment from the ring pool, sets the dma address,
* initializes the segment to zero, and sets the private next pointer to NULL.
*
* Section 4.11.1.1:
* "All components of all Command and Transfer TRBs shall be initialized to '0'"
*/
static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags)
{
struct xhci_segment *seg;
dma_addr_t dma;
seg = kzalloc(sizeof *seg, flags);
if (!seg)
return 0;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
if (!seg->trbs) {
kfree(seg);
return 0;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
seg->trbs, (unsigned long long)dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
memset(seg->trbs, 0, SEGMENT_SIZE);
seg->dma = dma;
seg->next = NULL;
return seg;
}
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
if (!seg)
return;
if (seg->trbs) {
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
seg->trbs, (unsigned long long)seg->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Freeing priv segment structure at %p\n", seg);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
kfree(seg);
}
/*
* Make the prev segment point to the next segment.
*
* Change the last TRB in the prev segment to be a Link TRB which points to the
* DMA address of the next segment. The caller needs to set any Link TRB
* related flags, such as End TRB, Toggle Cycle, and no snoop.
*/
static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
struct xhci_segment *next, bool link_trbs)
{
u32 val;
if (!prev || !next)
return;
prev->next = next;
if (link_trbs) {
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
val &= ~TRB_TYPE_BITMASK;
val |= TRB_TYPE(TRB_LINK);
USB: xhci: Work around for chain bit in link TRBs. Different sections of the xHCI 0.95 specification had opposing requirements for the chain bit in a link transaction request buffer (TRB). The chain bit is used to designate that adjacent TRBs are all part of the same scatter gather list that should be sent to the device. Link TRBs can be in the middle, or at the beginning or end of these chained TRBs. Sections 4.11.5.1 and 6.4.4.1 both stated the link TRB "shall have the chain bit set to 1", meaning it is always chained to the next TRB. However, section 4.6.9 on the stop endpoint command has specific cases for what the hardware must do for a link TRB with the chain bit set to 0. The 0.96 specification errata later cleared up this issue by fixing the 4.11.5.1 and 6.4.4.1 sections to state that a link TRB can have the chain bit set to 1 or 0. The problem is that the xHCI cancellation code depends on the chain bit of the link TRB being cleared when it's at the end of a TD, and some 0.95 xHCI hardware simply stops processing the ring when it encounters a link TRB with the chain bit cleared. Allow users who are testing 0.95 xHCI prototypes to set a module parameter (link_quirk) to turn on this link TRB work around. Cancellation may not work if the ring is stopped exactly on a link TRB with chain bit set, but cancellation should be a relatively uncommon case. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:36 -07:00
/* Always set the chain bit with 0.95 hardware */
if (xhci_link_trb_quirk(xhci))
val |= TRB_CHAIN;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
(unsigned long long)prev->dma,
(unsigned long long)next->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
}
/* XXX: Do we need the hcd structure in all these functions? */
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
{
struct xhci_segment *seg;
struct xhci_segment *first_seg;
if (!ring || !ring->first_seg)
return;
first_seg = ring->first_seg;
seg = first_seg->next;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Freeing ring at %p\n", ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
while (seg != first_seg) {
struct xhci_segment *next = seg->next;
xhci_segment_free(xhci, seg);
seg = next;
}
xhci_segment_free(xhci, first_seg);
ring->first_seg = NULL;
kfree(ring);
}
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
static void xhci_initialize_ring_info(struct xhci_ring *ring)
{
/* The ring is empty, so the enqueue pointer == dequeue pointer */
ring->enqueue = ring->first_seg->trbs;
ring->enq_seg = ring->first_seg;
ring->dequeue = ring->enqueue;
ring->deq_seg = ring->first_seg;
/* The ring is initialized to 0. The producer must write 1 to the cycle
* bit to handover ownership of the TRB, so PCS = 1. The consumer must
* compare CCS to the cycle bit to check ownership, so CCS = 1.
*/
ring->cycle_state = 1;
/* Not necessary for new rings, but needed for re-initialized rings */
ring->enq_updates = 0;
ring->deq_updates = 0;
}
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/**
* Create a new ring with zero or more segments.
*
* Link each segment together into a ring.
* Set the end flag and the cycle toggle bit on the last segment.
* See section 4.9.1 and figures 15 and 16.
*/
static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
unsigned int num_segs, bool link_trbs, gfp_t flags)
{
struct xhci_ring *ring;
struct xhci_segment *prev;
ring = kzalloc(sizeof *(ring), flags);
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Allocating ring at %p\n", ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
if (!ring)
return 0;
USB: xhci: Control transfer support. Allow device drivers to enqueue URBs to control endpoints on devices under an xHCI host controller. Each control transfer is represented by a series of Transfer Descriptors (TDs) written to an endpoint ring. There is one TD for the Setup phase, (optionally) one TD for the Data phase, and one TD for the Status phase. Enqueue these TDs onto the endpoint ring that represents the control endpoint. The host controller hardware will return an event on the event ring that points to the (DMA) address of one of the TDs on the endpoint ring. If the transfer was successful, the transfer event TRB will have a completion code of success, and it will point to the Status phase TD. Anything else is considered an error. This should work for control endpoints besides the default endpoint, but that hasn't been tested. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:01 -07:00
INIT_LIST_HEAD(&ring->td_list);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
if (num_segs == 0)
return ring;
ring->first_seg = xhci_segment_alloc(xhci, flags);
if (!ring->first_seg)
goto fail;
num_segs--;
prev = ring->first_seg;
while (num_segs > 0) {
struct xhci_segment *next;
next = xhci_segment_alloc(xhci, flags);
if (!next)
goto fail;
xhci_link_segments(xhci, prev, next, link_trbs);
prev = next;
num_segs--;
}
xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
if (link_trbs) {
/* See section 4.9.2.1 and 6.4.4.1 */
prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
xhci_dbg(xhci, "Wrote link toggle flag to"
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
" segment %p (virtual), 0x%llx (DMA)\n",
prev, (unsigned long long)prev->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
}
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
xhci_initialize_ring_info(ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
return ring;
fail:
xhci_ring_free(xhci, ring);
return 0;
}
USB: xhci: Refactor code to free or cache endpoint rings. Refactor out the code to cache or free endpoint rings from recently dropped or disabled endpoints. This code will be used by a new function to reset a device and disable all endpoints except control endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09 16:59:01 -07:00
void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index)
{
int rings_cached;
rings_cached = virt_dev->num_rings_cached;
if (rings_cached < XHCI_MAX_RINGS_CACHED) {
virt_dev->num_rings_cached++;
rings_cached = virt_dev->num_rings_cached;
virt_dev->ring_cache[rings_cached] =
virt_dev->eps[ep_index].ring;
xhci_dbg(xhci, "Cached old ring, "
"%d ring%s cached\n",
rings_cached,
(rings_cached > 1) ? "s" : "");
} else {
xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
xhci_dbg(xhci, "Ring cache full (%d rings), "
"freeing ring\n",
virt_dev->num_rings_cached);
}
virt_dev->eps[ep_index].ring = NULL;
}
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
/* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue
* pointers to the beginning of the ring.
*/
static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
struct xhci_ring *ring)
{
struct xhci_segment *seg = ring->first_seg;
do {
memset(seg->trbs, 0,
sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
/* All endpoint rings have link TRBs */
xhci_link_segments(xhci, seg, seg->next, 1);
seg = seg->next;
} while (seg != ring->first_seg);
xhci_initialize_ring_info(ring);
/* td list should be empty since all URBs have been cancelled,
* but just in case...
*/
INIT_LIST_HEAD(&ring->td_list);
}
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
int type, gfp_t flags)
{
struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
if (!ctx)
return NULL;
BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
ctx->type = type;
ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
if (type == XHCI_CTX_TYPE_INPUT)
ctx->size += CTX_SIZE(xhci->hcc_params);
ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
memset(ctx->bytes, 0, ctx->size);
return ctx;
}
void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
USB: xhci: Allow allocation of commands without input contexts. The xhci_command structure is the basic structure for issuing commands to the xHCI hardware. It contains a struct completion (so that the issuing function can wait on the command), command status, and a input context that is used to pass information to the hardware. Not all commands need the input context, so make it optional to allocate. Allow xhci_free_container_ctx() to be passed a NULL input context, to make freeing the xhci_command structure simple. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09 16:59:03 -07:00
if (!ctx)
return;
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
kfree(ctx);
}
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
return (struct xhci_input_control_ctx *)ctx->bytes;
}
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
if (ctx->type == XHCI_CTX_TYPE_DEVICE)
return (struct xhci_slot_ctx *)ctx->bytes;
return (struct xhci_slot_ctx *)
(ctx->bytes + CTX_SIZE(xhci->hcc_params));
}
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int ep_index)
{
/* increment ep index by offset of start of ep ctx array */
ep_index++;
if (ctx->type == XHCI_CTX_TYPE_INPUT)
ep_index++;
return (struct xhci_ep_ctx *)
(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
}
USB: xhci: Add watchdog timer for URB cancellation. In order to giveback a canceled URB, we must ensure that the xHCI hardware will not access the buffer in an URB. We can't modify the buffer pointers on endpoint rings without issuing and waiting for a stop endpoint command. Since URBs can be canceled in interrupt context, we can't wait on that command. The old code trusted that the host controller would respond to the command, and would giveback the URBs in the event handler. If the hardware never responds to the stop endpoint command, the URBs will never be completed, and we might hang the USB subsystem. Implement a watchdog timer that is spawned whenever a stop endpoint command is queued. If a stop endpoint command event is found on the event ring during an interrupt, we need to stop the watchdog timer with del_timer(). Since del_timer() can fail if the timer is running and waiting on the xHCI lock, we need a way to signal to the timer that everything is fine and it should exit. If we simply clear EP_HALT_PENDING, a new stop endpoint command could sneak in and set it before the watchdog timer can grab the lock. Instead we use a combination of the EP_HALT_PENDING flag and a counter for the number of pending stop endpoint commands (xhci_virt_ep->stop_cmds_pending). If we need to cancel the watchdog timer and del_timer() succeeds, we decrement the number of pending stop endpoint commands. If del_timer() fails, we leave the number of pending stop endpoint commands alone. In either case, we clear the EP_HALT_PENDING flag. The timer will decrement the number of pending stop endpoint commands once it obtains the lock. If the timer is the tail end of the last stop endpoint command (xhci_virt_ep->stop_cmds_pending == 0), and the endpoint's command is still pending (EP_HALT_PENDING is set), we assume the host is dying. The watchdog timer will set XHCI_STATE_DYING, try to halt the xHCI host, and give back all pending URBs. Various other places in the driver need to check whether the xHCI host is dying. If the interrupt handler ever notices, it should immediately stop processing events. The URB enqueue function should also return -ESHUTDOWN. The URB dequeue function should simply return the value of usb_hcd_check_unlink_urb() and the watchdog timer will take care of giving the URB back. When a device is disconnected, the xHCI hardware structures should be freed without issuing a disable slot command (since the hardware probably won't respond to it anyway). The debugging polling loop should stop polling if the host is dying. When a device is disconnected, any pending watchdog timers are killed with del_timer_sync(). It must be synchronous so that the watchdog timer doesn't attempt to access the freed endpoint structures. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-27 10:57:01 -07:00
static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
struct xhci_virt_ep *ep)
{
init_timer(&ep->stop_cmd_timer);
ep->stop_cmd_timer.data = (unsigned long) ep;
ep->stop_cmd_timer.function = xhci_stop_endpoint_command_watchdog;
ep->xhci = xhci;
}
USB: xhci: Control transfer support. Allow device drivers to enqueue URBs to control endpoints on devices under an xHCI host controller. Each control transfer is represented by a series of Transfer Descriptors (TDs) written to an endpoint ring. There is one TD for the Setup phase, (optionally) one TD for the Data phase, and one TD for the Status phase. Enqueue these TDs onto the endpoint ring that represents the control endpoint. The host controller hardware will return an event on the event ring that points to the (DMA) address of one of the TDs on the endpoint ring. If the transfer was successful, the transfer event TRB will have a completion code of success, and it will point to the Status phase TD. Anything else is considered an error. This should work for control endpoints besides the default endpoint, but that hasn't been tested. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:01 -07:00
/* All the xhci_tds in the ring's TD list should be freed at this point */
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *dev;
int i;
/* Slot ID 0 is reserved */
if (slot_id == 0 || !xhci->devs[slot_id])
return;
dev = xhci->devs[slot_id];
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (!dev)
return;
for (i = 0; i < 31; ++i)
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
if (dev->eps[i].ring)
xhci_ring_free(xhci, dev->eps[i].ring);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
if (dev->ring_cache) {
for (i = 0; i < dev->num_rings_cached; i++)
xhci_ring_free(xhci, dev->ring_cache[i]);
kfree(dev->ring_cache);
}
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (dev->in_ctx)
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
xhci_free_container_ctx(xhci, dev->in_ctx);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (dev->out_ctx)
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
xhci_free_container_ctx(xhci, dev->out_ctx);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = 0;
}
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
struct xhci_virt_device *dev;
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
int i;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* Slot ID 0 is reserved */
if (slot_id == 0 || xhci->devs[slot_id]) {
xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
return 0;
}
xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
if (!xhci->devs[slot_id])
return 0;
dev = xhci->devs[slot_id];
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
/* Allocate the (output) device context that will be used in the HC. */
dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (!dev->out_ctx)
goto fail;
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
(unsigned long long)dev->out_ctx->dma);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* Allocate the (input) device context for address device command */
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (!dev->in_ctx)
goto fail;
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
(unsigned long long)dev->in_ctx->dma);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
USB: xhci: Add watchdog timer for URB cancellation. In order to giveback a canceled URB, we must ensure that the xHCI hardware will not access the buffer in an URB. We can't modify the buffer pointers on endpoint rings without issuing and waiting for a stop endpoint command. Since URBs can be canceled in interrupt context, we can't wait on that command. The old code trusted that the host controller would respond to the command, and would giveback the URBs in the event handler. If the hardware never responds to the stop endpoint command, the URBs will never be completed, and we might hang the USB subsystem. Implement a watchdog timer that is spawned whenever a stop endpoint command is queued. If a stop endpoint command event is found on the event ring during an interrupt, we need to stop the watchdog timer with del_timer(). Since del_timer() can fail if the timer is running and waiting on the xHCI lock, we need a way to signal to the timer that everything is fine and it should exit. If we simply clear EP_HALT_PENDING, a new stop endpoint command could sneak in and set it before the watchdog timer can grab the lock. Instead we use a combination of the EP_HALT_PENDING flag and a counter for the number of pending stop endpoint commands (xhci_virt_ep->stop_cmds_pending). If we need to cancel the watchdog timer and del_timer() succeeds, we decrement the number of pending stop endpoint commands. If del_timer() fails, we leave the number of pending stop endpoint commands alone. In either case, we clear the EP_HALT_PENDING flag. The timer will decrement the number of pending stop endpoint commands once it obtains the lock. If the timer is the tail end of the last stop endpoint command (xhci_virt_ep->stop_cmds_pending == 0), and the endpoint's command is still pending (EP_HALT_PENDING is set), we assume the host is dying. The watchdog timer will set XHCI_STATE_DYING, try to halt the xHCI host, and give back all pending URBs. Various other places in the driver need to check whether the xHCI host is dying. If the interrupt handler ever notices, it should immediately stop processing events. The URB enqueue function should also return -ESHUTDOWN. The URB dequeue function should simply return the value of usb_hcd_check_unlink_urb() and the watchdog timer will take care of giving the URB back. When a device is disconnected, the xHCI hardware structures should be freed without issuing a disable slot command (since the hardware probably won't respond to it anyway). The debugging polling loop should stop polling if the host is dying. When a device is disconnected, any pending watchdog timers are killed with del_timer_sync(). It must be synchronous so that the watchdog timer doesn't attempt to access the freed endpoint structures. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-27 10:57:01 -07:00
/* Initialize the cancellation list and watchdog timers for each ep */
for (i = 0; i < 31; i++) {
xhci_init_endpoint_timer(xhci, &dev->eps[i]);
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
USB: xhci: Add watchdog timer for URB cancellation. In order to giveback a canceled URB, we must ensure that the xHCI hardware will not access the buffer in an URB. We can't modify the buffer pointers on endpoint rings without issuing and waiting for a stop endpoint command. Since URBs can be canceled in interrupt context, we can't wait on that command. The old code trusted that the host controller would respond to the command, and would giveback the URBs in the event handler. If the hardware never responds to the stop endpoint command, the URBs will never be completed, and we might hang the USB subsystem. Implement a watchdog timer that is spawned whenever a stop endpoint command is queued. If a stop endpoint command event is found on the event ring during an interrupt, we need to stop the watchdog timer with del_timer(). Since del_timer() can fail if the timer is running and waiting on the xHCI lock, we need a way to signal to the timer that everything is fine and it should exit. If we simply clear EP_HALT_PENDING, a new stop endpoint command could sneak in and set it before the watchdog timer can grab the lock. Instead we use a combination of the EP_HALT_PENDING flag and a counter for the number of pending stop endpoint commands (xhci_virt_ep->stop_cmds_pending). If we need to cancel the watchdog timer and del_timer() succeeds, we decrement the number of pending stop endpoint commands. If del_timer() fails, we leave the number of pending stop endpoint commands alone. In either case, we clear the EP_HALT_PENDING flag. The timer will decrement the number of pending stop endpoint commands once it obtains the lock. If the timer is the tail end of the last stop endpoint command (xhci_virt_ep->stop_cmds_pending == 0), and the endpoint's command is still pending (EP_HALT_PENDING is set), we assume the host is dying. The watchdog timer will set XHCI_STATE_DYING, try to halt the xHCI host, and give back all pending URBs. Various other places in the driver need to check whether the xHCI host is dying. If the interrupt handler ever notices, it should immediately stop processing events. The URB enqueue function should also return -ESHUTDOWN. The URB dequeue function should simply return the value of usb_hcd_check_unlink_urb() and the watchdog timer will take care of giving the URB back. When a device is disconnected, the xHCI hardware structures should be freed without issuing a disable slot command (since the hardware probably won't respond to it anyway). The debugging polling loop should stop polling if the host is dying. When a device is disconnected, any pending watchdog timers are killed with del_timer_sync(). It must be synchronous so that the watchdog timer doesn't attempt to access the freed endpoint structures. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-27 10:57:01 -07:00
}
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* Allocate endpoint 0 ring */
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags);
if (!dev->eps[0].ring)
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
goto fail;
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
/* Allocate pointers to the ring cache */
dev->ring_cache = kzalloc(
sizeof(struct xhci_ring *)*XHCI_MAX_RINGS_CACHED,
flags);
if (!dev->ring_cache)
goto fail;
dev->num_rings_cached = 0;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
init_completion(&dev->cmd_completion);
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
INIT_LIST_HEAD(&dev->cmd_list);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
USB: xhci: Always align output device contexts to 64 bytes. Make sure the xHCI output device context is 64-byte aligned. Previous code was using the same structure for both the output device context and the input control context. Since the structure had 32 bytes of flags before the device context, the output device context wouldn't be 64-byte aligned. Define a new structure to use for the output device context and clean up the debugging for these two structures. The copy of the device context in the input control context does *not* need to be 64-byte aligned. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:08 -07:00
/* Point to output device context in dcbaa. */
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
slot_id,
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
&xhci->dcbaa->dev_context_ptrs[slot_id],
USB: xhci: Always align output device contexts to 64 bytes. Make sure the xHCI output device context is 64-byte aligned. Previous code was using the same structure for both the output device context and the input control context. Since the structure had 32 bytes of flags before the device context, the output device context wouldn't be 64-byte aligned. Define a new structure to use for the output device context and clean up the debugging for these two structures. The copy of the device context in the input control context does *not* need to be 64-byte aligned. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:08 -07:00
(unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
return 1;
fail:
xhci_free_virt_device(xhci, slot_id);
return 0;
}
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct usb_device *top_dev;
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
if (udev->slot_id == 0 || !dev) {
xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
udev->slot_id);
return -EINVAL;
}
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* 2) New slot context and endpoint 0 context are valid*/
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* 3) Only the control endpoint is valid - one endpoint context */
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info |= LAST_CTX(1);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
USB: xhci: Set route string for all devices. The xHCI driver needs to set the route string in the slot context of all devices, not just SuperSpeed devices. The route string concept was added in the USB 3.0 specification, section 10.1.3.2. Each hub in the topology is expected to have no more than 15 ports in order for the route string of a device to be unique. SuperSpeed hubs are restricted to only having 15 ports, but FS/LS/HS hubs are not. The xHCI specification says that if the port number the device is under is greater than 15, that portion of the route string shall be set to 15. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:17 -07:00
slot_ctx->dev_info |= (u32) udev->route;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
switch (udev->speed) {
case USB_SPEED_SUPER:
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
break;
case USB_SPEED_HIGH:
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
break;
case USB_SPEED_FULL:
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
break;
case USB_SPEED_LOW:
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
break;
USB: rename USB_SPEED_VARIABLE to USB_SPEED_WIRELESS It's really the wireless speed, so rename the thing to make more sense. Based on a recommendation from David Vrabel Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-14 12:08:04 -07:00
case USB_SPEED_WIRELESS:
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
return -EINVAL;
break;
default:
/* Speed was set earlier, this shouldn't happen. */
BUG();
}
/* Find the root hub port this device is under */
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
/* Is this a LS/FS device under a HS hub? */
if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
udev->tt) {
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
slot_ctx->tt_info = udev->tt->hub->slot_id;
slot_ctx->tt_info |= udev->ttport << 8;
USB: xhci: Set multi-TT field for LS/FS devices under hubs. When setting up a slot context for an address device command, set the multi-TT field if this is a low or full speed device under a HS hub with multiple transaction translators. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:19 -07:00
if (udev->tt->multi)
slot_ctx->dev_info |= DEV_MTT;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
/* Step 4 - ring already allocated */
/* Step 5 */
ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
/*
* XXX: Not sure about wireless USB devices.
*/
USB: xhci: Set correct max packet size for HS/FS control endpoints. Set the max packet size for the default control endpoint on high speed devices to be 64 bytes. High speed devices always have a max packet size of 64 bytes. There's no use setting it to eight for the initial 8 byte descriptor fetch and then issuing (and waiting for) an evaluate context command to update it to 64 bytes for the subsequent control transfers. The USB core guesses that the max packet size on a full speed control endpoint is 64 bytes, and then updates it after the first 8-byte descriptor fetch. Change the initial setup for the xHCI internal representation of the full speed device to have a 64 byte max packet size. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:46 -07:00
switch (udev->speed) {
case USB_SPEED_SUPER:
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
ep0_ctx->ep_info2 |= MAX_PACKET(512);
USB: xhci: Set correct max packet size for HS/FS control endpoints. Set the max packet size for the default control endpoint on high speed devices to be 64 bytes. High speed devices always have a max packet size of 64 bytes. There's no use setting it to eight for the initial 8 byte descriptor fetch and then issuing (and waiting for) an evaluate context command to update it to 64 bytes for the subsequent control transfers. The USB core guesses that the max packet size on a full speed control endpoint is 64 bytes, and then updates it after the first 8-byte descriptor fetch. Change the initial setup for the xHCI internal representation of the full speed device to have a 64 byte max packet size. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:46 -07:00
break;
case USB_SPEED_HIGH:
/* USB core guesses at a 64-byte max packet first for FS devices */
case USB_SPEED_FULL:
ep0_ctx->ep_info2 |= MAX_PACKET(64);
break;
case USB_SPEED_LOW:
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
ep0_ctx->ep_info2 |= MAX_PACKET(8);
USB: xhci: Set correct max packet size for HS/FS control endpoints. Set the max packet size for the default control endpoint on high speed devices to be 64 bytes. High speed devices always have a max packet size of 64 bytes. There's no use setting it to eight for the initial 8 byte descriptor fetch and then issuing (and waiting for) an evaluate context command to update it to 64 bytes for the subsequent control transfers. The USB core guesses that the max packet size on a full speed control endpoint is 64 bytes, and then updates it after the first 8-byte descriptor fetch. Change the initial setup for the xHCI internal representation of the full speed device to have a 64 byte max packet size. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:46 -07:00
break;
USB: rename USB_SPEED_VARIABLE to USB_SPEED_WIRELESS It's really the wireless speed, so rename the thing to make more sense. Based on a recommendation from David Vrabel Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-14 12:08:04 -07:00
case USB_SPEED_WIRELESS:
USB: xhci: Set correct max packet size for HS/FS control endpoints. Set the max packet size for the default control endpoint on high speed devices to be 64 bytes. High speed devices always have a max packet size of 64 bytes. There's no use setting it to eight for the initial 8 byte descriptor fetch and then issuing (and waiting for) an evaluate context command to update it to 64 bytes for the subsequent control transfers. The USB core guesses that the max packet size on a full speed control endpoint is 64 bytes, and then updates it after the first 8-byte descriptor fetch. Change the initial setup for the xHCI internal representation of the full speed device to have a 64 byte max packet size. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:46 -07:00
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
return -EINVAL;
break;
default:
/* New speed? */
BUG();
}
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
ep0_ctx->deq =
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
dev->eps[0].ring->first_seg->dma;
ep0_ctx->deq |= dev->eps[0].ring->cycle_state;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
return 0;
}
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
* is set to N, it will service the endpoint every 2^(Interval)*125us.
*
* The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
* is set to 0.
*/
static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
unsigned int interval = 0;
switch (udev->speed) {
case USB_SPEED_HIGH:
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc))
interval = ep->desc.bInterval;
/* Fall through - SS and HS isoc/int have same decoding */
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
if (ep->desc.bInterval == 0)
interval = 0;
else
interval = ep->desc.bInterval - 1;
if (interval > 15)
interval = 15;
if (interval != ep->desc.bInterval + 1)
dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
ep->desc.bEndpointAddress, 1 << interval);
}
break;
/* Convert bInterval (in 1-255 frames) to microframes and round down to
* nearest power of 2.
*/
case USB_SPEED_FULL:
case USB_SPEED_LOW:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
interval = fls(8*ep->desc.bInterval) - 1;
if (interval > 10)
interval = 10;
if (interval < 3)
interval = 3;
if ((1 << interval) != 8*ep->desc.bInterval)
USB: xhci: Make endpoint interval debugging clearer. The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-16 12:59:24 -07:00
dev_warn(&udev->dev,
"ep %#x - rounding interval"
" to %d microframes, "
"ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
8*ep->desc.bInterval);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
}
break;
default:
BUG();
}
return EP_INTERVAL(interval);
}
USB: xhci: properly set the "Mult" field of the endpoint context. A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-16 08:07:04 -07:00
/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
*/
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp)
return 0;
return ep->ss_ep_comp->desc.bmAttributes;
}
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
int in;
u32 type;
in = usb_endpoint_dir_in(&ep->desc);
if (usb_endpoint_xfer_control(&ep->desc)) {
type = EP_TYPE(CTRL_EP);
} else if (usb_endpoint_xfer_bulk(&ep->desc)) {
if (in)
type = EP_TYPE(BULK_IN_EP);
else
type = EP_TYPE(BULK_OUT_EP);
} else if (usb_endpoint_xfer_isoc(&ep->desc)) {
if (in)
type = EP_TYPE(ISOC_IN_EP);
else
type = EP_TYPE(ISOC_OUT_EP);
} else if (usb_endpoint_xfer_int(&ep->desc)) {
if (in)
type = EP_TYPE(INT_IN_EP);
else
type = EP_TYPE(INT_OUT_EP);
} else {
BUG();
}
return type;
}
USB: xhci: properly set endpoint context fields for periodic eps. For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-16 08:07:27 -07:00
/* Return the maximum endpoint service interval time (ESIT) payload.
* Basically, this is the maxpacket size, multiplied by the burst size
* and mult size.
*/
static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
struct usb_device *udev,
struct usb_host_endpoint *ep)
{
int max_burst;
int max_packet;
/* Only applies for interrupt or isochronous endpoints */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc))
return 0;
if (udev->speed == USB_SPEED_SUPER) {
if (ep->ss_ep_comp)
return ep->ss_ep_comp->desc.wBytesPerInterval;
xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
/* Assume no bursts, no multiple opportunities to send. */
return ep->desc.wMaxPacketSize;
}
max_packet = ep->desc.wMaxPacketSize & 0x3ff;
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
/* A 0 in max burst means 1 transfer per ESIT */
return max_packet * (max_burst + 1);
}
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
int xhci_endpoint_init(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *udev,
USB: xhci: Respect critical sections. Narrow down time spent holding the xHCI spinlock so that it's only used to protect the xHCI rings, not as mutual exclusion. Stop allocating memory while holding the spinlock and calling xhci_alloc_virt_device() and xhci_endpoint_init(). The USB core should have locking in it to prevent device state to be manipulated by more than one kernel thread. E.g. you can't free a device while you're in the middle of setting a new configuration. So removing the locks from the sections where xhci_alloc_dev() and xhci_reset_bandwidth() touch xHCI's representation of the device should be OK. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-14 11:44:22 -07:00
struct usb_host_endpoint *ep,
gfp_t mem_flags)
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int max_packet;
unsigned int max_burst;
USB: xhci: properly set endpoint context fields for periodic eps. For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-16 08:07:27 -07:00
u32 max_esit_payload;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
ep_index = xhci_get_endpoint_index(&ep->desc);
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
/* Set up the endpoint ring */
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
virt_dev->eps[ep_index].new_ring =
xhci_ring_alloc(xhci, 1, true, mem_flags);
USB: xhci: Make reverting an alt setting "unfailable". When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-03 10:44:29 -07:00
if (!virt_dev->eps[ep_index].new_ring) {
/* Attempt to use the ring cache */
if (virt_dev->num_rings_cached == 0)
return -ENOMEM;
virt_dev->eps[ep_index].new_ring =
virt_dev->ring_cache[virt_dev->num_rings_cached];
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
virt_dev->num_rings_cached--;
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
}
USB: xhci: Endpoint representation refactoring. The xhci_ring structure contained information that is really related to an endpoint, not a ring. This will cause problems later when endpoint streams are supported and there are multiple rings per endpoint. Move the endpoint state and cancellation information into a new virtual endpoint structure, xhci_virt_ep. The list of TRBs to be cancelled should be per endpoint, not per ring, for easy access. There can be only one TRB that the endpoint stopped on after a stop endpoint command (even with streams enabled); move the stopped TRB information into the new virtual endpoint structure. Also move the 31 endpoint rings and temporary ring storage from the virtual device structure (xhci_virt_device) into the virtual endpoint structure (xhci_virt_ep). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:09 -07:00
ep_ring = virt_dev->eps[ep_index].new_ring;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
USB: xhci: properly set the "Mult" field of the endpoint context. A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-16 08:07:04 -07:00
ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep));
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
/* FIXME dig Mult and streams info out of ep companion desc */
USB: xhci: Setup HW retries correctly. The xHCI host controller can be programmed to retry a transfer a certain number of times per endpoint before it passes back an error condition to the host controller driver. The xHC will return an error code when the error count transitions from 1 to 0. Programming an error count of 3 means the xHC tries the transfer 3 times, programming it with a 1 means it tries to transfer once, and programming it with 0 means the HW tries the transfer infinitely. We want isochronous transfers to only be tried once, so set the error count to one. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:04:27 -07:00
/* Allow 3 retries for everything but isoc;
* error count = 0 means infinite retries.
*/
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
if (!usb_endpoint_xfer_isoc(&ep->desc))
ep_ctx->ep_info2 = ERROR_COUNT(3);
else
USB: xhci: Setup HW retries correctly. The xHCI host controller can be programmed to retry a transfer a certain number of times per endpoint before it passes back an error condition to the host controller driver. The xHC will return an error code when the error count transitions from 1 to 0. Programming an error count of 3 means the xHC tries the transfer 3 times, programming it with a 1 means it tries to transfer once, and programming it with 0 means the HW tries the transfer infinitely. We want isochronous transfers to only be tried once, so set the error count to one. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:04:27 -07:00
ep_ctx->ep_info2 = ERROR_COUNT(1);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
/* Set the max packet size and max burst */
switch (udev->speed) {
case USB_SPEED_SUPER:
max_packet = ep->desc.wMaxPacketSize;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
USB: xhci: Bulk transfer support Allow device drivers to submit URBs to bulk endpoints on devices under an xHCI host controller. Share code between the control and bulk enqueueing functions when it makes sense. To get the best performance out of bulk transfers, SuperSpeed devices must have the bMaxBurst size copied from their endpoint companion controller into the xHCI device context. This allows the host controller to "burst" up to 16 packets before it has to wait for the device to acknowledge the first packet. The buffers in Transfer Request Blocks (TRBs) can cross page boundaries, but they cannot cross 64KB boundaries. The buffer must be broken into multiple TRBs if a 64KB boundary is crossed. The sum of buffer lengths in all the TRBs in a Transfer Descriptor (TD) cannot exceed 64MB. To work around this, the enqueueing code must enqueue multiple TDs. The transfer event handler may incorrectly give back the URB in this case, if it gets a transfer event that points somewhere in the first TD. FIXME later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:50 -07:00
/* dig out max burst from ep companion desc */
USB: xhci: Fail gracefully if there's no SS ep companion descriptor. This is a work around for a bug in the SuperSpeed Endpoint Companion Descriptor parsing code. It fails in some corner cases, which means ep->ss_ep_comp may be NULL. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:04:38 -07:00
if (!ep->ss_ep_comp) {
xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
max_packet = 0;
} else {
max_packet = ep->ss_ep_comp->desc.bMaxBurst;
}
USB: xhci: Bulk transfer support Allow device drivers to submit URBs to bulk endpoints on devices under an xHCI host controller. Share code between the control and bulk enqueueing functions when it makes sense. To get the best performance out of bulk transfers, SuperSpeed devices must have the bMaxBurst size copied from their endpoint companion controller into the xHCI device context. This allows the host controller to "burst" up to 16 packets before it has to wait for the device to acknowledge the first packet. The buffers in Transfer Request Blocks (TRBs) can cross page boundaries, but they cannot cross 64KB boundaries. The buffer must be broken into multiple TRBs if a 64KB boundary is crossed. The sum of buffer lengths in all the TRBs in a Transfer Descriptor (TD) cannot exceed 64MB. To work around this, the enqueueing code must enqueue multiple TDs. The transfer event handler may incorrectly give back the URB in this case, if it gets a transfer event that points somewhere in the first TD. FIXME later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:50 -07:00
ep_ctx->ep_info2 |= MAX_BURST(max_packet);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
break;
case USB_SPEED_HIGH:
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
if (usb_endpoint_xfer_isoc(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
ep_ctx->ep_info2 |= MAX_BURST(max_burst);
}
/* Fall through */
case USB_SPEED_FULL:
case USB_SPEED_LOW:
max_packet = ep->desc.wMaxPacketSize & 0x3ff;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
break;
default:
BUG();
}
USB: xhci: properly set endpoint context fields for periodic eps. For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-16 08:07:27 -07:00
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload);
/*
* XXX no idea how to calculate the average TRB buffer length for bulk
* endpoints, as the driver gives us no clue how big each scatter gather
* list entry (or buffer) is going to be.
*
* For isochronous and interrupt endpoints, we set it to the max
* available, until we have new API in the USB core to allow drivers to
* declare how much bandwidth they actually need.
*
* Normally, it would be calculated by taking the total of the buffer
* lengths in the TD and then dividing by the number of TRBs in a TD,
* including link TRBs, No-op TRBs, and Event data TRBs. Since we don't
* use Event Data TRBs, and we don't chain in a link TRB on short
* transfers, we're basically dividing by 1.
*/
ep_ctx->tx_info |= AVG_TRB_LENGTH_FOR_EP(max_esit_payload);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
/* FIXME Debug endpoint context */
return 0;
}
void xhci_endpoint_zero(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_host_endpoint *ep)
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
ep_ctx->deq = 0;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:58:38 -07:00
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
USB: xhci: Configure endpoint code refactoring. Refactor out the code issue, wait for, and parse the event completion code for a configure endpoint command. Modify it to support the evaluate context command, which has a very similar submission process. Add functions to copy parts of the output context into the input context (which will be used in the evaluate context command). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:43 -07:00
/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
* Useful when you want to change one particular aspect of the endpoint and then
* issue a configure endpoint command.
*/
void xhci_endpoint_copy(struct xhci_hcd *xhci,
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx,
unsigned int ep_index)
USB: xhci: Configure endpoint code refactoring. Refactor out the code issue, wait for, and parse the event completion code for a configure endpoint command. Modify it to support the evaluate context command, which has a very similar submission process. Add functions to copy parts of the output context into the input context (which will be used in the evaluate context command). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:43 -07:00
{
struct xhci_ep_ctx *out_ep_ctx;
struct xhci_ep_ctx *in_ep_ctx;
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
USB: xhci: Configure endpoint code refactoring. Refactor out the code issue, wait for, and parse the event completion code for a configure endpoint command. Modify it to support the evaluate context command, which has a very similar submission process. Add functions to copy parts of the output context into the input context (which will be used in the evaluate context command). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:43 -07:00
in_ep_ctx->ep_info = out_ep_ctx->ep_info;
in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
in_ep_ctx->deq = out_ep_ctx->deq;
in_ep_ctx->tx_info = out_ep_ctx->tx_info;
}
/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
* Useful when you want to change one particular aspect of the endpoint and then
* issue a configure endpoint command. Only the context entries field matters,
* but we'll copy the whole thing anyway.
*/
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
void xhci_slot_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx)
USB: xhci: Configure endpoint code refactoring. Refactor out the code issue, wait for, and parse the event completion code for a configure endpoint command. Modify it to support the evaluate context command, which has a very similar submission process. Add functions to copy parts of the output context into the input context (which will be used in the evaluate context command). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:43 -07:00
{
struct xhci_slot_ctx *in_slot_ctx;
struct xhci_slot_ctx *out_slot_ctx;
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx);
USB: xhci: Configure endpoint code refactoring. Refactor out the code issue, wait for, and parse the event completion code for a configure endpoint command. Modify it to support the evaluate context command, which has a very similar submission process. Add functions to copy parts of the output context into the input context (which will be used in the evaluate context command). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 14:04:43 -07:00
in_slot_ctx->dev_info = out_slot_ctx->dev_info;
in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
in_slot_ctx->tt_info = out_slot_ctx->tt_info;
in_slot_ctx->dev_state = out_slot_ctx->dev_state;
}
USB: xhci: Scratchpad buffer allocation Allocates and initializes the scratchpad buffer array (XHCI 4.20). This is an array of 64-bit DMA addresses to scratch pages that the controller may use during operation. The number of pages is specified in the "Max Scratchpad Buffers" field of HCSPARAMS2. The DMA address of this array is written into slot 0 of the DCBAA. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:03 -07:00
/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
{
int i;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
if (!num_sp)
return 0;
xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
if (!xhci->scratchpad)
goto fail_sp;
xhci->scratchpad->sp_array =
pci_alloc_consistent(to_pci_dev(dev),
num_sp * sizeof(u64),
&xhci->scratchpad->sp_dma);
if (!xhci->scratchpad->sp_array)
goto fail_sp2;
xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
if (!xhci->scratchpad->sp_buffers)
goto fail_sp3;
xhci->scratchpad->sp_dma_buffers =
kzalloc(sizeof(dma_addr_t) * num_sp, flags);
if (!xhci->scratchpad->sp_dma_buffers)
goto fail_sp4;
xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
for (i = 0; i < num_sp; i++) {
dma_addr_t dma;
void *buf = pci_alloc_consistent(to_pci_dev(dev),
xhci->page_size, &dma);
if (!buf)
goto fail_sp5;
xhci->scratchpad->sp_array[i] = dma;
xhci->scratchpad->sp_buffers[i] = buf;
xhci->scratchpad->sp_dma_buffers[i] = dma;
}
return 0;
fail_sp5:
for (i = i - 1; i >= 0; i--) {
pci_free_consistent(to_pci_dev(dev), xhci->page_size,
xhci->scratchpad->sp_buffers[i],
xhci->scratchpad->sp_dma_buffers[i]);
}
kfree(xhci->scratchpad->sp_dma_buffers);
fail_sp4:
kfree(xhci->scratchpad->sp_buffers);
fail_sp3:
pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
xhci->scratchpad->sp_array,
xhci->scratchpad->sp_dma);
fail_sp2:
kfree(xhci->scratchpad);
xhci->scratchpad = NULL;
fail_sp:
return -ENOMEM;
}
static void scratchpad_free(struct xhci_hcd *xhci)
{
int num_sp;
int i;
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
if (!xhci->scratchpad)
return;
num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
for (i = 0; i < num_sp; i++) {
pci_free_consistent(pdev, xhci->page_size,
xhci->scratchpad->sp_buffers[i],
xhci->scratchpad->sp_dma_buffers[i]);
}
kfree(xhci->scratchpad->sp_dma_buffers);
kfree(xhci->scratchpad->sp_buffers);
pci_free_consistent(pdev, num_sp * sizeof(u64),
xhci->scratchpad->sp_array,
xhci->scratchpad->sp_dma);
kfree(xhci->scratchpad);
xhci->scratchpad = NULL;
}
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
USB: xhci: Allow allocation of commands without input contexts. The xhci_command structure is the basic structure for issuing commands to the xHCI hardware. It contains a struct completion (so that the issuing function can wait on the command), command status, and a input context that is used to pass information to the hardware. Not all commands need the input context, so make it optional to allocate. Allow xhci_free_container_ctx() to be passed a NULL input context, to make freeing the xhci_command structure simple. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09 16:59:03 -07:00
bool allocate_in_ctx, bool allocate_completion,
gfp_t mem_flags)
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
{
struct xhci_command *command;
command = kzalloc(sizeof(*command), mem_flags);
if (!command)
return NULL;
USB: xhci: Allow allocation of commands without input contexts. The xhci_command structure is the basic structure for issuing commands to the xHCI hardware. It contains a struct completion (so that the issuing function can wait on the command), command status, and a input context that is used to pass information to the hardware. Not all commands need the input context, so make it optional to allocate. Allow xhci_free_container_ctx() to be passed a NULL input context, to make freeing the xhci_command structure simple. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09 16:59:03 -07:00
if (allocate_in_ctx) {
command->in_ctx =
xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT,
mem_flags);
if (!command->in_ctx) {
kfree(command);
return NULL;
}
USB: xhci-mem.c: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-21 04:51:47 -07:00
}
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
if (allocate_completion) {
command->completion =
kzalloc(sizeof(struct completion), mem_flags);
if (!command->completion) {
xhci_free_container_ctx(xhci, command->in_ctx);
USB: xhci-mem.c: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-21 04:51:47 -07:00
kfree(command);
USB: xhci: Change how xHCI commands are handled. Some commands to the xHCI hardware cannot be allowed to fail due to out of memory issues or the command ring being full. Add a way to reserve a TRB on the command ring, and make all command queueing functions indicate whether they are using a reserved TRB. Add a way to pre-allocate all the memory a command might need. A command needs an input context, a variable to store the status, and (optionally) a completion for the caller to wait on. Change all code that assumes the input device context, status, and completion for a command is stored in the xhci virtual USB device structure (xhci_virt_device). Store pending completions in a FIFO in xhci_virt_device. Make the event handler for a configure endpoint command check to see whether a pending command in the list has completed. We need to use separate input device contexts for some configure endpoint commands, since multiple drivers can submit requests at the same time that require a configure endpoint command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04 10:53:13 -07:00
return NULL;
}
init_completion(command->completion);
}
command->status = 0;
INIT_LIST_HEAD(&command->cmd_list);
return command;
}
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command)
{
xhci_free_container_ctx(xhci,
command->in_ctx);
kfree(command->completion);
kfree(command);
}
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
int size;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
int i;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/* Free the Event Ring Segment Table and the actual Event Ring */
USB: xhci: Fix bug memory free after failed initialization. If the xHCI driver fails during the memory initialization, xhci->ir_set may not be a valid pointer. Check that it points to valid DMA'able memory before writing to that address during the memory freeing process. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-03 23:02:22 -07:00
if (xhci->ir_set) {
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
}
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
xhci->erst.entries, xhci->erst.erst_dma_addr);
xhci->erst.entries = NULL;
xhci_dbg(xhci, "Freed ERST\n");
if (xhci->event_ring)
xhci_ring_free(xhci, xhci->event_ring);
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci_dbg(xhci, "Freed command ring\n");
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
for (i = 1; i < MAX_HC_SLOTS; ++i)
xhci_free_virt_device(xhci, i);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
if (xhci->segment_pool)
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
xhci_dbg(xhci, "Freed segment pool\n");
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (xhci->device_pool)
dma_pool_destroy(xhci->device_pool);
xhci->device_pool = NULL;
xhci_dbg(xhci, "Freed device context pool\n");
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:53:42 -07:00
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
USB: xhci: Fix scratchpad deallocation. The scratchpad_free() function uses xhci->page_size to free some memory with pci_free_consistent(). However, the page_size is set to zero before the call, causing kernel oopses on driver unload. Call scratchpad_free() before setting xhci->page_size to zero. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: John Youn <John.Youn@synopsys.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-04 12:22:19 -07:00
scratchpad_free(xhci);
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
xhci->page_size = 0;
xhci->page_shift = 0;
}
USB: xhci: Add tests for TRB address translation. It's not surprising that the transfer request buffer (TRB) physical to virtual address translation function has bugs in it, since I wrote most of it at 4am last October. Add a test suite to check the TRB math. This runs at memory initialization time, and causes the driver to fail to load if the TRB math fails. Please excuse the excessively long lines in the test vectors; they can't really be made shorter and still be readable. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-09 14:35:23 -07:00
static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
struct xhci_segment *input_seg,
union xhci_trb *start_trb,
union xhci_trb *end_trb,
dma_addr_t input_dma,
struct xhci_segment *result_seg,
char *test_name, int test_number)
{
unsigned long long start_dma;
unsigned long long end_dma;
struct xhci_segment *seg;
start_dma = xhci_trb_virt_to_dma(input_seg, start_trb);
end_dma = xhci_trb_virt_to_dma(input_seg, end_trb);
seg = trb_in_td(input_seg, start_trb, end_trb, input_dma);
if (seg != result_seg) {
xhci_warn(xhci, "WARN: %s TRB math test %d failed!\n",
test_name, test_number);
xhci_warn(xhci, "Tested TRB math w/ seg %p and "
"input DMA 0x%llx\n",
input_seg,
(unsigned long long) input_dma);
xhci_warn(xhci, "starting TRB %p (0x%llx DMA), "
"ending TRB %p (0x%llx DMA)\n",
start_trb, start_dma,
end_trb, end_dma);
xhci_warn(xhci, "Expected seg %p, got seg %p\n",
result_seg, seg);
return -1;
}
return 0;
}
/* TRB math checks for xhci_trb_in_td(), using the command and event rings. */
static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags)
{
struct {
dma_addr_t input_dma;
struct xhci_segment *result_seg;
} simple_test_vector [] = {
/* A zeroed DMA field should fail */
{ 0, NULL },
/* One TRB before the ring start should fail */
{ xhci->event_ring->first_seg->dma - 16, NULL },
/* One byte before the ring start should fail */
{ xhci->event_ring->first_seg->dma - 1, NULL },
/* Starting TRB should succeed */
{ xhci->event_ring->first_seg->dma, xhci->event_ring->first_seg },
/* Ending TRB should succeed */
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16,
xhci->event_ring->first_seg },
/* One byte after the ring end should fail */
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16 + 1, NULL },
/* One TRB after the ring end should fail */
{ xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT)*16, NULL },
/* An address of all ones should fail */
{ (dma_addr_t) (~0), NULL },
};
struct {
struct xhci_segment *input_seg;
union xhci_trb *start_trb;
union xhci_trb *end_trb;
dma_addr_t input_dma;
struct xhci_segment *result_seg;
} complex_test_vector [] = {
/* Test feeding a valid DMA address from a different ring */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = xhci->event_ring->first_seg->trbs,
.end_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
.input_dma = xhci->cmd_ring->first_seg->dma,
.result_seg = NULL,
},
/* Test feeding a valid end TRB from a different ring */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = xhci->event_ring->first_seg->trbs,
.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
.input_dma = xhci->cmd_ring->first_seg->dma,
.result_seg = NULL,
},
/* Test feeding a valid start and end TRB from a different ring */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = xhci->cmd_ring->first_seg->trbs,
.end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
.input_dma = xhci->cmd_ring->first_seg->dma,
.result_seg = NULL,
},
/* TRB in this ring, but after this TD */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = &xhci->event_ring->first_seg->trbs[0],
.end_trb = &xhci->event_ring->first_seg->trbs[3],
.input_dma = xhci->event_ring->first_seg->dma + 4*16,
.result_seg = NULL,
},
/* TRB in this ring, but before this TD */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = &xhci->event_ring->first_seg->trbs[3],
.end_trb = &xhci->event_ring->first_seg->trbs[6],
.input_dma = xhci->event_ring->first_seg->dma + 2*16,
.result_seg = NULL,
},
/* TRB in this ring, but after this wrapped TD */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
.end_trb = &xhci->event_ring->first_seg->trbs[1],
.input_dma = xhci->event_ring->first_seg->dma + 2*16,
.result_seg = NULL,
},
/* TRB in this ring, but before this wrapped TD */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
.end_trb = &xhci->event_ring->first_seg->trbs[1],
.input_dma = xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 4)*16,
.result_seg = NULL,
},
/* TRB not in this ring, and we have a wrapped TD */
{ .input_seg = xhci->event_ring->first_seg,
.start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3],
.end_trb = &xhci->event_ring->first_seg->trbs[1],
.input_dma = xhci->cmd_ring->first_seg->dma + 2*16,
.result_seg = NULL,
},
};
unsigned int num_tests;
int i, ret;
num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
xhci->event_ring->first_seg,
xhci->event_ring->first_seg->trbs,
&xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1],
simple_test_vector[i].input_dma,
simple_test_vector[i].result_seg,
"Simple", i);
if (ret < 0)
return ret;
}
num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]);
for (i = 0; i < num_tests; i++) {
ret = xhci_test_trb_in_td(xhci,
complex_test_vector[i].input_seg,
complex_test_vector[i].start_trb,
complex_test_vector[i].end_trb,
complex_test_vector[i].input_dma,
complex_test_vector[i].result_seg,
"Complex", i);
if (ret < 0)
return ret;
}
xhci_dbg(xhci, "TRB math tests passed.\n");
return 0;
}
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
dma_addr_t dma;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
unsigned int val, val2;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
u64 val_64;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
struct xhci_segment *seg;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
u32 page_size;
int i;
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
if ((0x1 & page_size) != 0)
break;
page_size = page_size >> 1;
}
if (i < 16)
xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
else
xhci_warn(xhci, "WARN: no supported page size\n");
/* Use 4K pages, since that's common and the minimum the HC supports */
xhci->page_shift = 12;
xhci->page_size = 1 << xhci->page_shift;
xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
/*
* Program the Number of Device Slots Enabled field in the CONFIG
* register with the max value of slots the HC can handle.
*/
val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
(unsigned int) val);
val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
val |= (val2 & ~HCS_SLOTS_MASK);
xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
(unsigned int) val);
xhci_writel(xhci, val, &xhci->op_regs->config_reg);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:53:42 -07:00
/*
* Section 5.4.8 - doorbell array must be
* "physically contiguous and 64-byte (cache line) aligned".
*/
xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
sizeof(*xhci->dcbaa), &dma);
if (!xhci->dcbaa)
goto fail;
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
xhci->dcbaa->dma = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:53:42 -07:00
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/*
* Initialize the ring segment pool. The ring must be a contiguous
* structure comprised of TRBs. The TRBs must be 16 byte aligned,
* however, the command ring segment needs 64-byte aligned segments,
* so we pick the greater alignment need.
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
/* See Table 46 and Note on Figure 55 */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
USB: xhci: Support for 64-byte contexts Adds support for controllers that use 64-byte contexts. The following context data structures are affected by this: Device, Input, Input Control, Endpoint, and Slot. To accommodate the use of either 32 or 64-byte contexts, a Device or Input context can only be accessed through functions which look-up and return pointers to their contained contexts. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:15 -07:00
2112, 64, xhci->page_size);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
if (!xhci->segment_pool || !xhci->device_pool)
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
goto fail;
/* Set up the command ring to have one segments for now. */
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
if (!xhci->cmd_ring)
goto fail;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/* Set the address in the Command Ring Control register */
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
xhci->cmd_ring->cycle_state;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
xhci_dbg_cmd_ptrs(xhci);
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
val &= DBOFF_MASK;
xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
" from cap regs base addr\n", val);
xhci->dba = (void *) xhci->cap_regs + val;
xhci_dbg_regs(xhci);
xhci_print_run_regs(xhci);
/* Set ir_set to interrupt register set 0 */
xhci->ir_set = (void *) xhci->run_regs->ir_set;
/*
* Event ring setup: Allocate a normal ring, but also setup
* the event ring segment table (ERST). Section 4.9.3.
*/
xhci_dbg(xhci, "// Allocating event ring\n");
xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
if (!xhci->event_ring)
goto fail;
USB: xhci: Add tests for TRB address translation. It's not surprising that the transfer request buffer (TRB) physical to virtual address translation function has bugs in it, since I wrote most of it at 4am last October. Add a test suite to check the TRB math. This runs at memory initialization time, and causes the driver to fail to load if the TRB math fails. Please excuse the excessively long lines in the test vectors; they can't really be made shorter and still be readable. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-09 14:35:23 -07:00
if (xhci_check_trb_in_td_math(xhci, flags) < 0)
goto fail;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
if (!xhci->erst.entries)
goto fail;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
(unsigned long long)dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
xhci->erst.num_entries = ERST_NUM_SEGS;
xhci->erst.erst_dma_addr = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
xhci->erst.num_entries,
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci->erst.entries,
(unsigned long long)xhci->erst.erst_dma_addr);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/* set ring base address and size for each segment table entry */
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
entry->seg_addr = seg->dma;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
entry->seg_size = TRBS_PER_SEGMENT;
entry->rsvd = 0;
seg = seg->next;
}
/* set ERST count with the number of entries in the segment table */
val = xhci_readl(xhci, &xhci->ir_set->erst_size);
val &= ERST_SIZE_MASK;
val |= ERST_NUM_SEGS;
xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
val);
xhci_writel(xhci, val, &xhci->ir_set->erst_size);
xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
/* set the segment table base address */
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:14:08 -07:00
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
(unsigned long long)xhci->erst.erst_dma_addr);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:03:31 -07:00
val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
val_64 &= ERST_PTR_MASK;
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
/* Set the event ring dequeue address */
USB: xhci: Avoid global namespace pollution. Make all globally visible functions start with xhci_ and mark functions as static if they're only called within the same C file. Fix some long lines while we're at it. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-29 19:05:20 -07:00
xhci_set_hc_event_deq(xhci);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:34 -07:00
xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
xhci_print_ir_set(xhci, xhci->ir_set, 0);
/*
* XXX: Might need to set the Interrupter Moderation Register to
* something other than the default (~1ms minimum between interrupts).
* See section 5.5.1.2.
*/
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:57:38 -07:00
init_completion(&xhci->addr_dev);
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = 0;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
USB: xhci: Scratchpad buffer allocation Allocates and initializes the scratchpad buffer array (XHCI 4.20). This is an array of 64-bit DMA addresses to scratch pages that the controller may use during operation. The number of pages is specified in the "Max Scratchpad Buffers" field of HCSPARAMS2. The DMA address of this array is written into slot 0 of the DCBAA. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:03 -07:00
if (scratchpad_alloc(xhci, flags))
goto fail;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
return 0;
USB: xhci: Scratchpad buffer allocation Allocates and initializes the scratchpad buffer array (XHCI 4.20). This is an array of 64-bit DMA addresses to scratch pages that the controller may use during operation. The number of pages is specified in the "Max Scratchpad Buffers" field of HCSPARAMS2. The DMA address of this array is written into slot 0 of the DCBAA. Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 12:05:03 -07:00
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-27 19:52:28 -07:00
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
Copy Permalink