kevin/linux
1
Fork 0
Code
930e652a21
linux/kernel/sys_ni.c

137 lines
3.7 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <linux/linkage.h>
#include <linux/errno.h>
#include <asm/unistd.h>
/*
* Non-implemented system calls get redirected here.
*/
asmlinkage long sys_ni_syscall(void)
{
return -ENOSYS;
}
cond_syscall(sys_nfsservctl);
cond_syscall(sys_quotactl);
cond_syscall(sys_acct);
cond_syscall(sys_lookup_dcookie);
cond_syscall(sys_swapon);
cond_syscall(sys_swapoff);
[PATCH] kexec: add kexec syscalls This patch introduces the architecture independent implementation the sys_kexec_load, the compat_sys_kexec_load system calls. Kexec on panic support has been integrated into the core patch and is relatively clean. In addition the hopefully architecture independent option crashkernel=size@location has been docuemented. It's purpose is to reserve space for the panic kernel to live, and where no DMA transfer will ever be setup to access. Signed-off-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 14:57:52 -07:00
cond_syscall(sys_kexec_load);
cond_syscall(compat_sys_kexec_load);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cond_syscall(sys_init_module);
cond_syscall(sys_delete_module);
cond_syscall(sys_socketpair);
cond_syscall(sys_bind);
cond_syscall(sys_listen);
cond_syscall(sys_accept);
cond_syscall(sys_connect);
cond_syscall(sys_getsockname);
cond_syscall(sys_getpeername);
cond_syscall(sys_sendto);
cond_syscall(sys_send);
cond_syscall(sys_recvfrom);
cond_syscall(sys_recv);
cond_syscall(sys_socket);
cond_syscall(sys_setsockopt);
cond_syscall(sys_getsockopt);
cond_syscall(sys_shutdown);
cond_syscall(sys_sendmsg);
cond_syscall(sys_recvmsg);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
[PATCH] lightweight robust futexes: core Add the core infrastructure for robust futexes: structure definitions, the new syscalls and the do_exit() based cleanup mechanism. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Acked-by: Ulrich Drepper <drepper@redhat.com> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 02:16:22 -07:00
cond_syscall(sys_set_robust_list);
cond_syscall(compat_sys_set_robust_list);
cond_syscall(sys_get_robust_list);
cond_syscall(compat_sys_get_robust_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cond_syscall(sys_epoll_create);
cond_syscall(sys_epoll_ctl);
cond_syscall(sys_epoll_wait);
cond_syscall(sys_semget);
cond_syscall(sys_semop);
cond_syscall(sys_semtimedop);
cond_syscall(sys_semctl);
cond_syscall(sys_msgget);
cond_syscall(sys_msgsnd);
cond_syscall(sys_msgrcv);
cond_syscall(sys_msgctl);
cond_syscall(sys_shmget);
[PATCH] consolidate sys_shmat Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
cond_syscall(sys_shmat);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
cond_syscall(sys_shmdt);
cond_syscall(sys_shmctl);
cond_syscall(sys_mq_open);
cond_syscall(sys_mq_unlink);
cond_syscall(sys_mq_timedsend);
cond_syscall(sys_mq_timedreceive);
cond_syscall(sys_mq_notify);
cond_syscall(sys_mq_getsetattr);
cond_syscall(compat_sys_mq_open);
cond_syscall(compat_sys_mq_timedsend);
cond_syscall(compat_sys_mq_timedreceive);
cond_syscall(compat_sys_mq_notify);
cond_syscall(compat_sys_mq_getsetattr);
cond_syscall(sys_mbind);
cond_syscall(sys_get_mempolicy);
cond_syscall(sys_set_mempolicy);
cond_syscall(compat_sys_mbind);
cond_syscall(compat_sys_get_mempolicy);
cond_syscall(compat_sys_set_mempolicy);
cond_syscall(sys_add_key);
cond_syscall(sys_request_key);
cond_syscall(sys_keyctl);
cond_syscall(compat_sys_keyctl);
cond_syscall(compat_sys_socketcall);
[PATCH] inotify inotify is intended to correct the deficiencies of dnotify, particularly its inability to scale and its terrible user interface: * dnotify requires the opening of one fd per each directory that you intend to watch. This quickly results in too many open files and pins removable media, preventing unmount. * dnotify is directory-based. You only learn about changes to directories. Sure, a change to a file in a directory affects the directory, but you are then forced to keep a cache of stat structures. * dnotify's interface to user-space is awful. Signals? inotify provides a more usable, simple, powerful solution to file change notification: * inotify's interface is a system call that returns a fd, not SIGIO. You get a single fd, which is select()-able. * inotify has an event that says "the filesystem that the item you were watching is on was unmounted." * inotify can watch directories or files. Inotify is currently used by Beagle (a desktop search infrastructure), Gamin (a FAM replacement), and other projects. See Documentation/filesystems/inotify.txt. Signed-off-by: Robert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 14:06:03 -07:00
cond_syscall(sys_inotify_init);
cond_syscall(sys_inotify_add_watch);
cond_syscall(sys_inotify_rm_watch);
[PATCH] Swap Migration V5: sys_migrate_pages interface sys_migrate_pages implementation using swap based page migration This is the original API proposed by Ray Bryant in his posts during the first half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org. The intent of sys_migrate is to migrate memory of a process. A process may have migrated to another node. Memory was allocated optimally for the prior context. sys_migrate_pages allows to shift the memory to the new node. sys_migrate_pages is also useful if the processes available memory nodes have changed through cpuset operations to manually move the processes memory. Paul Jackson is working on an automated mechanism that will allow an automatic migration if the cpuset of a process is changed. However, a user may decide to manually control the migration. This implementation is put into the policy layer since it uses concepts and functions that are also needed for mbind and friends. The patch also provides a do_migrate_pages function that may be useful for cpusets to automatically move memory. sys_migrate_pages does not modify policies in contrast to Ray's implementation. The current code here is based on the swap based page migration capability and thus is not able to preserve the physical layout relative to it containing nodeset (which may be a cpuset). When direct page migration becomes available then the implementation needs to be changed to do a isomorphic move of pages between different nodesets. The current implementation simply evicts all pages in source nodeset that are not in the target nodeset. Patch supports ia64, i386 and x86_64. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:00:51 -07:00
cond_syscall(sys_migrate_pages);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:55 -07:00
cond_syscall(sys_move_pages);
[PATCH] tiny: Make *[ug]id16 support optional Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:05:24 -07:00
cond_syscall(sys_chown16);
cond_syscall(sys_fchown16);
cond_syscall(sys_getegid16);
cond_syscall(sys_geteuid16);
cond_syscall(sys_getgid16);
cond_syscall(sys_getgroups16);
cond_syscall(sys_getresgid16);
cond_syscall(sys_getresuid16);
cond_syscall(sys_getuid16);
cond_syscall(sys_lchown16);
cond_syscall(sys_setfsgid16);
cond_syscall(sys_setfsuid16);
cond_syscall(sys_setgid16);
cond_syscall(sys_setgroups16);
cond_syscall(sys_setregid16);
cond_syscall(sys_setresgid16);
cond_syscall(sys_setresuid16);
cond_syscall(sys_setreuid16);
cond_syscall(sys_setuid16);
[PATCH] Make vm86 support optional This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:05:26 -07:00
cond_syscall(sys_vm86old);
cond_syscall(sys_vm86);
[PATCH] Fix compile for CONFIG_SYSVIPC=n or CONFIG_SYSCTL=n The compat syscalls are added to sys_ni.c since they are not defined if the above CONFIG options are off. Also, nfs would not build with CONFIG_SYSCTL off. Noticed by Arthur Othieno. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 19:28:08 -07:00
cond_syscall(compat_sys_ipc);
cond_syscall(compat_sys_sysctl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
cond_syscall(sys_pciconfig_write);
cond_syscall(sys_pciconfig_iobase);
cond_syscall(sys32_ipc);
cond_syscall(sys32_sysctl);
cond_syscall(ppc_rtas);
[PATCH] spufs: The SPU file system, base This is the current version of the spu file system, used for driving SPEs on the Cell Broadband Engine. This release is almost identical to the version for the 2.6.14 kernel posted earlier, which is available as part of the Cell BE Linux distribution from http://www.bsc.es/projects/deepcomputing/linuxoncell/. The first patch provides all the interfaces for running spu application, but does not have any support for debugging SPU tasks or for scheduling. Both these functionalities are added in the subsequent patches. See Documentation/filesystems/spufs.txt on how to use spufs. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 13:53:48 -07:00
cond_syscall(sys_spu_run);
cond_syscall(sys_spu_create);
[PATCH] frv: define MMU mode specific syscalls as 'cond_syscall' and clean up unneeded macros For some architectures, a few syscalls are not linked in noMMU mode. In that case, the MMU depending syscalls are needed to be defined as 'cond_syscall'. For example, ARM architecture selectively links sys_mlock by the mode configuration. In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in arch/frv/kernel/entry.S. However these conditional macros are just duplicates if they were defined as cond_syscall. Compilation test is done with FRV toolchains for both of MMU and noMMU mode. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10 22:53:06 -07:00
/* mmu depending weak syscall entries */
cond_syscall(sys_mprotect);
cond_syscall(sys_msync);
cond_syscall(sys_mlock);
cond_syscall(sys_munlock);
cond_syscall(sys_mlockall);
cond_syscall(sys_munlockall);
cond_syscall(sys_mincore);
cond_syscall(sys_madvise);
cond_syscall(sys_mremap);
cond_syscall(sys_remap_file_pages);
[PATCH] sys_move_pages: 32bit support (i386, x86_64) sys_move_pages() support for 32bit (i386 plus x86_64 compat layer) Add support for move_pages() on i386 and also add the compat functions necessary to run 32 bit binaries on x86_64. Add compat_sys_move_pages to the x86_64 32bit binary layer. Note that it is not up to date so I added the missing pieces. Not sure if this is done the right way. [akpm@osdl.org: compile fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:56 -07:00
cond_syscall(compat_sys_move_pages);
Copy Permalink