1
linux/drivers/base/core.c

1354 lines
34 KiB
C
Raw Normal View History

/*
* drivers/base/core.c - core driver model code (device registration, etc)
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
* Copyright (c) 2006 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (c) 2006 Novell, Inc.
*
* This file is released under the GPLv2
*
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/kdev_t.h>
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
#include <linux/notifier.h>
#include <linux/genhd.h>
#include <linux/kallsyms.h>
#include <linux/semaphore.h>
#include "base.h"
#include "power/power.h"
int (*platform_notify)(struct device *dev) = NULL;
int (*platform_notify_remove)(struct device *dev) = NULL;
#ifdef CONFIG_BLOCK
static inline int device_is_not_partition(struct device *dev)
{
return !(dev->type == &part_type);
}
#else
static inline int device_is_not_partition(struct device *dev)
{
return 1;
}
#endif
/**
* dev_driver_string - Return a device's driver name, if at all possible
* @dev: struct device to get the name of
*
* Will return the device's driver's name if it is bound to a device. If
* the device is not bound to a device, it will return the name of the bus
* it is attached to. If it is not attached to a bus either, an empty
* string will be returned.
*/
const char *dev_driver_string(struct device *dev)
{
return dev->driver ? dev->driver->name :
(dev->bus ? dev->bus->name :
(dev->class ? dev->class->name : ""));
}
EXPORT_SYMBOL(dev_driver_string);
#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct device_attribute *dev_attr = to_dev_attr(attr);
struct device *dev = to_dev(kobj);
ssize_t ret = -EIO;
if (dev_attr->show)
ret = dev_attr->show(dev, dev_attr, buf);
if (ret >= (ssize_t)PAGE_SIZE) {
print_symbol("dev_attr_show: %s returned bad count\n",
(unsigned long)dev_attr->show);
}
return ret;
}
static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
const char *buf, size_t count)
{
struct device_attribute *dev_attr = to_dev_attr(attr);
struct device *dev = to_dev(kobj);
ssize_t ret = -EIO;
if (dev_attr->store)
ret = dev_attr->store(dev, dev_attr, buf, count);
return ret;
}
static struct sysfs_ops dev_sysfs_ops = {
.show = dev_attr_show,
.store = dev_attr_store,
};
/**
* device_release - free device structure.
* @kobj: device's kobject.
*
* This is called once the reference count for the object
* reaches 0. We forward the call to the device's release
* method, which should handle actually freeing the structure.
*/
static void device_release(struct kobject *kobj)
{
struct device *dev = to_dev(kobj);
if (dev->release)
dev->release(dev);
else if (dev->type && dev->type->release)
dev->type->release(dev);
else if (dev->class && dev->class->dev_release)
dev->class->dev_release(dev);
else {
printk(KERN_ERR "Device '%s' does not have a release() "
"function, it is broken and must be fixed.\n",
dev->bus_id);
WARN_ON(1);
}
}
static struct kobj_type device_ktype = {
.release = device_release,
.sysfs_ops = &dev_sysfs_ops,
};
static int dev_uevent_filter(struct kset *kset, struct kobject *kobj)
{
struct kobj_type *ktype = get_ktype(kobj);
if (ktype == &device_ktype) {
struct device *dev = to_dev(kobj);
if (dev->uevent_suppress)
return 0;
if (dev->bus)
return 1;
if (dev->class)
return 1;
}
return 0;
}
static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj)
{
struct device *dev = to_dev(kobj);
if (dev->bus)
return dev->bus->name;
if (dev->class)
return dev->class->name;
return NULL;
}
static int dev_uevent(struct kset *kset, struct kobject *kobj,
struct kobj_uevent_env *env)
{
struct device *dev = to_dev(kobj);
int retval = 0;
/* add the major/minor if present */
if (MAJOR(dev->devt)) {
add_uevent_var(env, "MAJOR=%u", MAJOR(dev->devt));
add_uevent_var(env, "MINOR=%u", MINOR(dev->devt));
}
if (dev->type && dev->type->name)
add_uevent_var(env, "DEVTYPE=%s", dev->type->name);
if (dev->driver)
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
#ifdef CONFIG_SYSFS_DEPRECATED
if (dev->class) {
struct device *parent = dev->parent;
/* find first bus device in parent chain */
while (parent && !parent->bus)
parent = parent->parent;
if (parent && parent->bus) {
const char *path;
path = kobject_get_path(&parent->kobj, GFP_KERNEL);
if (path) {
add_uevent_var(env, "PHYSDEVPATH=%s", path);
kfree(path);
}
add_uevent_var(env, "PHYSDEVBUS=%s", parent->bus->name);
if (parent->driver)
add_uevent_var(env, "PHYSDEVDRIVER=%s",
parent->driver->name);
}
} else if (dev->bus) {
add_uevent_var(env, "PHYSDEVBUS=%s", dev->bus->name);
if (dev->driver)
add_uevent_var(env, "PHYSDEVDRIVER=%s",
dev->driver->name);
}
#endif
/* have the bus specific function add its stuff */
if (dev->bus && dev->bus->uevent) {
retval = dev->bus->uevent(dev, env);
if (retval)
pr_debug("device: '%s': %s: bus uevent() returned %d\n",
dev->bus_id, __func__, retval);
}
/* have the class specific function add its stuff */
if (dev->class && dev->class->dev_uevent) {
retval = dev->class->dev_uevent(dev, env);
if (retval)
pr_debug("device: '%s': %s: class uevent() "
"returned %d\n", dev->bus_id,
__func__, retval);
}
/* have the device type specific fuction add its stuff */
if (dev->type && dev->type->uevent) {
retval = dev->type->uevent(dev, env);
if (retval)
pr_debug("device: '%s': %s: dev_type uevent() "
"returned %d\n", dev->bus_id,
__func__, retval);
}
return retval;
}
static struct kset_uevent_ops device_uevent_ops = {
.filter = dev_uevent_filter,
.name = dev_uevent_name,
.uevent = dev_uevent,
};
static ssize_t show_uevent(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct kobject *top_kobj;
struct kset *kset;
struct kobj_uevent_env *env = NULL;
int i;
size_t count = 0;
int retval;
/* search the kset, the device belongs to */
top_kobj = &dev->kobj;
while (!top_kobj->kset && top_kobj->parent)
top_kobj = top_kobj->parent;
if (!top_kobj->kset)
goto out;
kset = top_kobj->kset;
if (!kset->uevent_ops || !kset->uevent_ops->uevent)
goto out;
/* respect filter */
if (kset->uevent_ops && kset->uevent_ops->filter)
if (!kset->uevent_ops->filter(kset, &dev->kobj))
goto out;
env = kzalloc(sizeof(struct kobj_uevent_env), GFP_KERNEL);
if (!env)
return -ENOMEM;
/* let the kset specific function add its keys */
retval = kset->uevent_ops->uevent(kset, &dev->kobj, env);
if (retval)
goto out;
/* copy keys to file */
for (i = 0; i < env->envp_idx; i++)
count += sprintf(&buf[count], "%s\n", env->envp[i]);
out:
kfree(env);
return count;
}
static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
enum kobject_action action;
if (kobject_action_type(buf, count, &action) == 0) {
kobject_uevent(&dev->kobj, action);
goto out;
}
dev_err(dev, "uevent: unsupported action-string; this will "
"be ignored in a future kernel version\n");
kobject_uevent(&dev->kobj, KOBJ_ADD);
out:
return count;
}
static struct device_attribute uevent_attr =
__ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent);
static int device_add_attributes(struct device *dev,
struct device_attribute *attrs)
{
int error = 0;
int i;
if (attrs) {
for (i = 0; attr_name(attrs[i]); i++) {
error = device_create_file(dev, &attrs[i]);
if (error)
break;
}
if (error)
while (--i >= 0)
device_remove_file(dev, &attrs[i]);
}
return error;
}
static void device_remove_attributes(struct device *dev,
struct device_attribute *attrs)
{
int i;
if (attrs)
for (i = 0; attr_name(attrs[i]); i++)
device_remove_file(dev, &attrs[i]);
}
static int device_add_groups(struct device *dev,
struct attribute_group **groups)
{
int error = 0;
int i;
if (groups) {
for (i = 0; groups[i]; i++) {
error = sysfs_create_group(&dev->kobj, groups[i]);
if (error) {
while (--i >= 0)
sysfs_remove_group(&dev->kobj,
groups[i]);
break;
}
}
}
return error;
}
static void device_remove_groups(struct device *dev,
struct attribute_group **groups)
{
int i;
if (groups)
for (i = 0; groups[i]; i++)
sysfs_remove_group(&dev->kobj, groups[i]);
}
static int device_add_attrs(struct device *dev)
{
struct class *class = dev->class;
struct device_type *type = dev->type;
int error;
if (class) {
error = device_add_attributes(dev, class->dev_attrs);
if (error)
return error;
}
if (type) {
error = device_add_groups(dev, type->groups);
if (error)
goto err_remove_class_attrs;
}
error = device_add_groups(dev, dev->groups);
if (error)
goto err_remove_type_groups;
return 0;
err_remove_type_groups:
if (type)
device_remove_groups(dev, type->groups);
err_remove_class_attrs:
if (class)
device_remove_attributes(dev, class->dev_attrs);
return error;
}
static void device_remove_attrs(struct device *dev)
{
struct class *class = dev->class;
struct device_type *type = dev->type;
device_remove_groups(dev, dev->groups);
if (type)
device_remove_groups(dev, type->groups);
if (class)
device_remove_attributes(dev, class->dev_attrs);
}
static ssize_t show_dev(struct device *dev, struct device_attribute *attr,
char *buf)
{
return print_dev_t(buf, dev->devt);
}
static struct device_attribute devt_attr =
__ATTR(dev, S_IRUGO, show_dev, NULL);
/* kset to create /sys/devices/ */
struct kset *devices_kset;
/**
* device_create_file - create sysfs attribute file for device.
* @dev: device.
* @attr: device attribute descriptor.
*/
int device_create_file(struct device *dev, struct device_attribute *attr)
{
int error = 0;
if (dev)
error = sysfs_create_file(&dev->kobj, &attr->attr);
return error;
}
/**
* device_remove_file - remove sysfs attribute file.
* @dev: device.
* @attr: device attribute descriptor.
*/
void device_remove_file(struct device *dev, struct device_attribute *attr)
{
if (dev)
sysfs_remove_file(&dev->kobj, &attr->attr);
}
/**
* device_create_bin_file - create sysfs binary attribute file for device.
* @dev: device.
* @attr: device binary attribute descriptor.
*/
int device_create_bin_file(struct device *dev, struct bin_attribute *attr)
{
int error = -EINVAL;
if (dev)
error = sysfs_create_bin_file(&dev->kobj, attr);
return error;
}
EXPORT_SYMBOL_GPL(device_create_bin_file);
/**
* device_remove_bin_file - remove sysfs binary attribute file
* @dev: device.
* @attr: device binary attribute descriptor.
*/
void device_remove_bin_file(struct device *dev, struct bin_attribute *attr)
{
if (dev)
sysfs_remove_bin_file(&dev->kobj, attr);
}
EXPORT_SYMBOL_GPL(device_remove_bin_file);
/**
* device_schedule_callback_owner - helper to schedule a callback for a device
* @dev: device.
* @func: callback function to invoke later.
* @owner: module owning the callback routine
*
* Attribute methods must not unregister themselves or their parent device
* (which would amount to the same thing). Attempts to do so will deadlock,
* since unregistration is mutually exclusive with driver callbacks.
*
* Instead methods can call this routine, which will attempt to allocate
* and schedule a workqueue request to call back @func with @dev as its
* argument in the workqueue's process context. @dev will be pinned until
* @func returns.
*
* This routine is usually called via the inline device_schedule_callback(),
* which automatically sets @owner to THIS_MODULE.
*
* Returns 0 if the request was submitted, -ENOMEM if storage could not
* be allocated, -ENODEV if a reference to @owner isn't available.
*
* NOTE: This routine won't work if CONFIG_SYSFS isn't set! It uses an
* underlying sysfs routine (since it is intended for use by attribute
* methods), and if sysfs isn't available you'll get nothing but -ENOSYS.
*/
int device_schedule_callback_owner(struct device *dev,
void (*func)(struct device *), struct module *owner)
{
return sysfs_schedule_callback(&dev->kobj,
(void (*)(void *)) func, dev, owner);
}
EXPORT_SYMBOL_GPL(device_schedule_callback_owner);
static void klist_children_get(struct klist_node *n)
{
struct device *dev = container_of(n, struct device, knode_parent);
get_device(dev);
}
static void klist_children_put(struct klist_node *n)
{
struct device *dev = container_of(n, struct device, knode_parent);
put_device(dev);
}
/**
* device_initialize - init device structure.
* @dev: device.
*
* This prepares the device for use by other layers,
* including adding it to the device hierarchy.
* It is the first half of device_register(), if called by
* that, though it can also be called separately, so one
* may use @dev's fields (e.g. the refcount).
*/
void device_initialize(struct device *dev)
{
dev->kobj.kset = devices_kset;
kobject_init(&dev->kobj, &device_ktype);
klist_init(&dev->klist_children, klist_children_get,
klist_children_put);
INIT_LIST_HEAD(&dev->dma_pools);
INIT_LIST_HEAD(&dev->node);
init_MUTEX(&dev->sem);
spin_lock_init(&dev->devres_lock);
INIT_LIST_HEAD(&dev->devres_head);
device_init_wakeup(dev, 0);
set_dev_node(dev, -1);
}
#ifdef CONFIG_SYSFS_DEPRECATED
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
/* class devices without a parent live in /sys/class/<classname>/ */
if (dev->class && (!parent || parent->class != dev->class))
return &dev->class->subsys.kobj;
/* all other devices keep their parent */
else if (parent)
return &parent->kobj;
return NULL;
}
static inline void cleanup_device_parent(struct device *dev) {}
static inline void cleanup_glue_dir(struct device *dev,
struct kobject *glue_dir) {}
#else
static struct kobject *virtual_device_parent(struct device *dev)
{
static struct kobject *virtual_dir = NULL;
if (!virtual_dir)
virtual_dir = kobject_create_and_add("virtual",
&devices_kset->kobj);
return virtual_dir;
}
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
int retval;
if (dev->class) {
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
/*
* If we have no parent, we live in "virtual".
* Class-devices with a non class-device as parent, live
* in a "glue" directory to prevent namespace collisions.
*/
if (parent == NULL)
parent_kobj = virtual_device_parent(dev);
else if (parent->class)
return &parent->kobj;
else
parent_kobj = &parent->kobj;
/* find our class-directory at the parent and reference it */
spin_lock(&dev->class->class_dirs.list_lock);
list_for_each_entry(k, &dev->class->class_dirs.list, entry)
if (k->parent == parent_kobj) {
kobj = kobject_get(k);
break;
}
spin_unlock(&dev->class->class_dirs.list_lock);
if (kobj)
return kobj;
/* or create a new class-directory at the parent device */
k = kobject_create();
if (!k)
return NULL;
k->kset = &dev->class->class_dirs;
retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
if (retval < 0) {
kobject_put(k);
return NULL;
}
/* do not emit an uevent for this simple "glue" directory */
return k;
}
if (parent)
return &parent->kobj;
return NULL;
}
static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
{
/* see if we live in a "glue" directory */
if (!glue_dir || !dev->class ||
glue_dir->kset != &dev->class->class_dirs)
return;
kobject_put(glue_dir);
}
static void cleanup_device_parent(struct device *dev)
{
cleanup_glue_dir(dev, dev->kobj.parent);
}
#endif
static void setup_parent(struct device *dev, struct device *parent)
{
struct kobject *kobj;
kobj = get_device_parent(dev, parent);
if (kobj)
dev->kobj.parent = kobj;
}
static int device_add_class_symlinks(struct device *dev)
{
int error;
if (!dev->class)
return 0;
error = sysfs_create_link(&dev->kobj, &dev->class->subsys.kobj,
"subsystem");
if (error)
goto out;
#ifdef CONFIG_SYSFS_DEPRECATED
/* stacked class devices need a symlink in the class directory */
if (dev->kobj.parent != &dev->class->subsys.kobj &&
device_is_not_partition(dev)) {
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
if (error)
goto out_subsys;
}
if (dev->parent && device_is_not_partition(dev)) {
struct device *parent = dev->parent;
char *class_name;
/*
* stacked class devices have the 'device' link
* pointing to the bus device instead of the parent
*/
while (parent->class && !parent->bus && parent->parent)
parent = parent->parent;
error = sysfs_create_link(&dev->kobj,
&parent->kobj,
"device");
if (error)
goto out_busid;
class_name = make_class_name(dev->class->name,
&dev->kobj);
if (class_name)
error = sysfs_create_link(&dev->parent->kobj,
&dev->kobj, class_name);
kfree(class_name);
if (error)
goto out_device;
}
return 0;
out_device:
if (dev->parent && device_is_not_partition(dev))
sysfs_remove_link(&dev->kobj, "device");
out_busid:
if (dev->kobj.parent != &dev->class->subsys.kobj &&
device_is_not_partition(dev))
sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
#else
/* link in the class directory pointing to the device */
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
if (error)
goto out_subsys;
if (dev->parent && device_is_not_partition(dev)) {
error = sysfs_create_link(&dev->kobj, &dev->parent->kobj,
"device");
if (error)
goto out_busid;
}
return 0;
out_busid:
sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
#endif
out_subsys:
sysfs_remove_link(&dev->kobj, "subsystem");
out:
return error;
}
static void device_remove_class_symlinks(struct device *dev)
{
if (!dev->class)
return;
#ifdef CONFIG_SYSFS_DEPRECATED
if (dev->parent && device_is_not_partition(dev)) {
char *class_name;
class_name = make_class_name(dev->class->name, &dev->kobj);
if (class_name) {
sysfs_remove_link(&dev->parent->kobj, class_name);
kfree(class_name);
}
sysfs_remove_link(&dev->kobj, "device");
}
if (dev->kobj.parent != &dev->class->subsys.kobj &&
device_is_not_partition(dev))
sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
#else
if (dev->parent && device_is_not_partition(dev))
sysfs_remove_link(&dev->kobj, "device");
sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
#endif
sysfs_remove_link(&dev->kobj, "subsystem");
}
/**
* device_add - add device to device hierarchy.
* @dev: device.
*
* This is part 2 of device_register(), though may be called
* separately _iff_ device_initialize() has been called separately.
*
* This adds it to the kobject hierarchy via kobject_add(), adds it
* to the global and sibling lists for the device, then
* adds it to the other relevant subsystems of the driver model.
*/
int device_add(struct device *dev)
{
struct device *parent = NULL;
struct class_interface *class_intf;
int error;
dev = get_device(dev);
if (!dev || !strlen(dev->bus_id)) {
error = -EINVAL;
goto Done;
}
pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
parent = get_device(dev->parent);
setup_parent(dev, parent);
/* first, register with generic layer. */
error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id);
if (error)
goto Error;
/* notify platform of device entry */
if (platform_notify)
platform_notify(dev);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
/* notify clients of device entry (new way) */
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
BUS_NOTIFY_ADD_DEVICE, dev);
error = device_create_file(dev, &uevent_attr);
if (error)
goto attrError;
if (MAJOR(dev->devt)) {
error = device_create_file(dev, &devt_attr);
if (error)
goto ueventattrError;
}
error = device_add_class_symlinks(dev);
if (error)
goto SymlinkError;
error = device_add_attrs(dev);
if (error)
goto AttrsError;
error = bus_add_device(dev);
if (error)
goto BusError;
error = device_pm_add(dev);
if (error)
goto PMError;
kobject_uevent(&dev->kobj, KOBJ_ADD);
bus_attach_device(dev);
if (parent)
klist_add_tail(&dev->knode_parent, &parent->klist_children);
if (dev->class) {
down(&dev->class->sem);
/* tie the class to the device */
list_add_tail(&dev->node, &dev->class->devices);
/* notify any interfaces that the device is here */
list_for_each_entry(class_intf, &dev->class->interfaces, node)
if (class_intf->add_dev)
class_intf->add_dev(dev, class_intf);
up(&dev->class->sem);
}
Done:
put_device(dev);
return error;
PMError:
bus_remove_device(dev);
BusError:
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
BUS_NOTIFY_DEL_DEVICE, dev);
device_remove_attrs(dev);
AttrsError:
device_remove_class_symlinks(dev);
SymlinkError:
if (MAJOR(dev->devt))
device_remove_file(dev, &devt_attr);
ueventattrError:
device_remove_file(dev, &uevent_attr);
attrError:
kobject_uevent(&dev->kobj, KOBJ_REMOVE);
kobject_del(&dev->kobj);
Error:
cleanup_device_parent(dev);
if (parent)
put_device(parent);
goto Done;
}
/**
* device_register - register a device with the system.
* @dev: pointer to the device structure
*
* This happens in two clean steps - initialize the device
* and add it to the system. The two steps can be called
* separately, but this is the easiest and most common.
* I.e. you should only call the two helpers separately if
* have a clearly defined need to use and refcount the device
* before it is added to the hierarchy.
*/
int device_register(struct device *dev)
{
device_initialize(dev);
return device_add(dev);
}
/**
* get_device - increment reference count for device.
* @dev: device.
*
* This simply forwards the call to kobject_get(), though
* we do take care to provide for the case that we get a NULL
* pointer passed in.
*/
struct device *get_device(struct device *dev)
{
return dev ? to_dev(kobject_get(&dev->kobj)) : NULL;
}
/**
* put_device - decrement reference count.
* @dev: device in question.
*/
void put_device(struct device *dev)
{
/* might_sleep(); */
if (dev)
kobject_put(&dev->kobj);
}
/**
* device_del - delete device from system.
* @dev: device.
*
* This is the first part of the device unregistration
* sequence. This removes the device from the lists we control
* from here, has it removed from the other driver model
* subsystems it was added to in device_add(), and removes it
* from the kobject hierarchy.
*
* NOTE: this should be called manually _iff_ device_add() was
* also called manually.
*/
void device_del(struct device *dev)
{
struct device *parent = dev->parent;
struct class_interface *class_intf;
device_pm_remove(dev);
if (parent)
klist_del(&dev->knode_parent);
if (MAJOR(dev->devt))
device_remove_file(dev, &devt_attr);
if (dev->class) {
device_remove_class_symlinks(dev);
down(&dev->class->sem);
/* notify any interfaces that the device is now gone */
list_for_each_entry(class_intf, &dev->class->interfaces, node)
if (class_intf->remove_dev)
class_intf->remove_dev(dev, class_intf);
/* remove the device from the class list */
list_del_init(&dev->node);
up(&dev->class->sem);
}
device_remove_file(dev, &uevent_attr);
device_remove_attrs(dev);
bus_remove_device(dev);
/*
* Some platform devices are driven without driver attached
* and managed resources may have been acquired. Make sure
* all resources are released.
*/
devres_release_all(dev);
/* Notify the platform of the removal, in case they
* need to do anything...
*/
if (platform_notify_remove)
platform_notify_remove(dev);
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-24 20:44:59 -07:00
BUS_NOTIFY_DEL_DEVICE, dev);
kobject_uevent(&dev->kobj, KOBJ_REMOVE);
cleanup_device_parent(dev);
kobject_del(&dev->kobj);
put_device(parent);
}
/**
* device_unregister - unregister device from system.
* @dev: device going away.
*
* We do this in two parts, like we do device_register(). First,
* we remove it from all the subsystems with device_del(), then
* we decrement the reference count via put_device(). If that
* is the final reference count, the device will be cleaned up
* via device_release() above. Otherwise, the structure will
* stick around until the final reference to the device is dropped.
*/
void device_unregister(struct device *dev)
{
pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
device_del(dev);
put_device(dev);
}
static struct device *next_device(struct klist_iter *i)
{
struct klist_node *n = klist_next(i);
return n ? container_of(n, struct device, knode_parent) : NULL;
}
/**
* device_for_each_child - device child iterator.
* @parent: parent struct device.
* @data: data for the callback.
* @fn: function to be called for each device.
*
* Iterate over @parent's child devices, and call @fn for each,
* passing it @data.
*
* We check the return of @fn each time. If it returns anything
* other than 0, we break out and return that value.
*/
int device_for_each_child(struct device *parent, void *data,
int (*fn)(struct device *dev, void *data))
{
struct klist_iter i;
struct device *child;
int error = 0;
klist_iter_init(&parent->klist_children, &i);
while ((child = next_device(&i)) && !error)
error = fn(child, data);
klist_iter_exit(&i);
return error;
}
/**
* device_find_child - device iterator for locating a particular device.
* @parent: parent struct device
* @data: Data to pass to match function
* @match: Callback function to check device
*
* This is similar to the device_for_each_child() function above, but it
* returns a reference to a device that is 'found' for later use, as
* determined by the @match callback.
*
* The callback should return 0 if the device doesn't match and non-zero
* if it does. If the callback returns non-zero and a reference to the
* current device can be obtained, this function will return to the caller
* and not iterate over any more devices.
*/
struct device *device_find_child(struct device *parent, void *data,
int (*match)(struct device *dev, void *data))
{
struct klist_iter i;
struct device *child;
if (!parent)
return NULL;
klist_iter_init(&parent->klist_children, &i);
while ((child = next_device(&i)))
if (match(child, data) && get_device(child))
break;
klist_iter_exit(&i);
return child;
}
int __init devices_init(void)
{
devices_kset = kset_create_and_add("devices", &device_uevent_ops, NULL);
if (!devices_kset)
return -ENOMEM;
return 0;
}
EXPORT_SYMBOL_GPL(device_for_each_child);
EXPORT_SYMBOL_GPL(device_find_child);
EXPORT_SYMBOL_GPL(device_initialize);
EXPORT_SYMBOL_GPL(device_add);
EXPORT_SYMBOL_GPL(device_register);
EXPORT_SYMBOL_GPL(device_del);
EXPORT_SYMBOL_GPL(device_unregister);
EXPORT_SYMBOL_GPL(get_device);
EXPORT_SYMBOL_GPL(put_device);
EXPORT_SYMBOL_GPL(device_create_file);
EXPORT_SYMBOL_GPL(device_remove_file);
static void device_create_release(struct device *dev)
{
pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
kfree(dev);
}
/**
* device_create - creates a device and registers it with sysfs
* @class: pointer to the struct class that this device should be registered to
* @parent: pointer to the parent struct device of this new device, if any
* @devt: the dev_t for the char device to be added
* @fmt: string for the device's name
*
* This function can be used by char device classes. A struct device
* will be created in sysfs, registered to the specified class.
*
* A "dev" file will be created, showing the dev_t for the device, if
* the dev_t is not 0,0.
* If a pointer to a parent struct device is passed in, the newly created
* struct device will be a child of that device in sysfs.
* The pointer to the struct device will be returned from the call.
* Any further sysfs files that might be required can be created using this
* pointer.
*
* Note: the struct class passed to this function must have previously
* been created with a call to class_create().
*/
struct device *device_create(struct class *class, struct device *parent,
dev_t devt, const char *fmt, ...)
{
va_list args;
struct device *dev = NULL;
int retval = -ENODEV;
if (class == NULL || IS_ERR(class))
goto error;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
retval = -ENOMEM;
goto error;
}
dev->devt = devt;
dev->class = class;
dev->parent = parent;
dev->release = device_create_release;
va_start(args, fmt);
vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
va_end(args);
retval = device_register(dev);
if (retval)
goto error;
return dev;
error:
kfree(dev);
return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(device_create);
static int __match_devt(struct device *dev, void *data)
{
dev_t *devt = data;
return dev->devt == *devt;
}
/**
* device_destroy - removes a device that was created with device_create()
* @class: pointer to the struct class that this device was registered with
* @devt: the dev_t of the device that was previously registered
*
* This call unregisters and cleans up a device that was created with a
* call to device_create().
*/
void device_destroy(struct class *class, dev_t devt)
{
struct device *dev;
dev = class_find_device(class, &devt, __match_devt);
if (dev) {
put_device(dev);
device_unregister(dev);
}
}
EXPORT_SYMBOL_GPL(device_destroy);
/**
* device_rename - renames a device
* @dev: the pointer to the struct device to be renamed
* @new_name: the new name of the device
*/
int device_rename(struct device *dev, char *new_name)
{
char *old_class_name = NULL;
char *new_class_name = NULL;
char *old_device_name = NULL;
int error;
dev = get_device(dev);
if (!dev)
return -EINVAL;
pr_debug("device: '%s': %s: renaming to '%s'\n", dev->bus_id,
__func__, new_name);
#ifdef CONFIG_SYSFS_DEPRECATED
if ((dev->class) && (dev->parent))
old_class_name = make_class_name(dev->class->name, &dev->kobj);
#endif
old_device_name = kmalloc(BUS_ID_SIZE, GFP_KERNEL);
if (!old_device_name) {
error = -ENOMEM;
goto out;
}
strlcpy(old_device_name, dev->bus_id, BUS_ID_SIZE);
strlcpy(dev->bus_id, new_name, BUS_ID_SIZE);
error = kobject_rename(&dev->kobj, new_name);
if (error) {
strlcpy(dev->bus_id, old_device_name, BUS_ID_SIZE);
goto out;
}
#ifdef CONFIG_SYSFS_DEPRECATED
if (old_class_name) {
new_class_name = make_class_name(dev->class->name, &dev->kobj);
if (new_class_name) {
error = sysfs_create_link(&dev->parent->kobj,
&dev->kobj, new_class_name);
if (error)
goto out;
sysfs_remove_link(&dev->parent->kobj, old_class_name);
}
}
#else
if (dev->class) {
sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
if (error) {
dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
__func__, error);
}
}
#endif
out:
put_device(dev);
kfree(new_class_name);
kfree(old_class_name);
kfree(old_device_name);
return error;
}
EXPORT_SYMBOL_GPL(device_rename);
static int device_move_class_links(struct device *dev,
struct device *old_parent,
struct device *new_parent)
{
int error = 0;
#ifdef CONFIG_SYSFS_DEPRECATED
char *class_name;
class_name = make_class_name(dev->class->name, &dev->kobj);
if (!class_name) {
error = -ENOMEM;
goto out;
}
if (old_parent) {
sysfs_remove_link(&dev->kobj, "device");
sysfs_remove_link(&old_parent->kobj, class_name);
}
if (new_parent) {
error = sysfs_create_link(&dev->kobj, &new_parent->kobj,
"device");
if (error)
goto out;
error = sysfs_create_link(&new_parent->kobj, &dev->kobj,
class_name);
if (error)
sysfs_remove_link(&dev->kobj, "device");
} else
error = 0;
out:
kfree(class_name);
return error;
#else
if (old_parent)
sysfs_remove_link(&dev->kobj, "device");
if (new_parent)
error = sysfs_create_link(&dev->kobj, &new_parent->kobj,
"device");
return error;
#endif
}
/**
* device_move - moves a device to a new parent
* @dev: the pointer to the struct device to be moved
* @new_parent: the new parent of the device (can by NULL)
*/
int device_move(struct device *dev, struct device *new_parent)
{
int error;
struct device *old_parent;
struct kobject *new_parent_kobj;
dev = get_device(dev);
if (!dev)
return -EINVAL;
new_parent = get_device(new_parent);
new_parent_kobj = get_device_parent(dev, new_parent);
pr_debug("device: '%s': %s: moving to '%s'\n", dev->bus_id,
__func__, new_parent ? new_parent->bus_id : "<NULL>");
error = kobject_move(&dev->kobj, new_parent_kobj);
if (error) {
cleanup_glue_dir(dev, new_parent_kobj);
put_device(new_parent);
goto out;
}
old_parent = dev->parent;
dev->parent = new_parent;
if (old_parent)
klist_remove(&dev->knode_parent);
if (new_parent)
klist_add_tail(&dev->knode_parent, &new_parent->klist_children);
if (!dev->class)
goto out_put;
error = device_move_class_links(dev, old_parent, new_parent);
if (error) {
/* We ignore errors on cleanup since we're hosed anyway... */
device_move_class_links(dev, new_parent, old_parent);
if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
if (new_parent)
klist_remove(&dev->knode_parent);
if (old_parent)
klist_add_tail(&dev->knode_parent,
&old_parent->klist_children);
}
cleanup_glue_dir(dev, new_parent_kobj);
put_device(new_parent);
goto out;
}
out_put:
put_device(old_parent);
out:
put_device(dev);
return error;
}
EXPORT_SYMBOL_GPL(device_move);
/**
* device_shutdown - call ->shutdown() on each device to shutdown.
*/
void device_shutdown(void)
{
struct device *dev, *devn;
list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list,
kobj.entry) {
if (dev->bus && dev->bus->shutdown) {
dev_dbg(dev, "shutdown\n");
dev->bus->shutdown(dev);
} else if (dev->driver && dev->driver->shutdown) {
dev_dbg(dev, "shutdown\n");
dev->driver->shutdown(dev);
}
}
}