kevin/linux
1
Fork 0
Code
90de4a1875
linux/arch/x86/kvm/lapic.h

161 lines
4.8 KiB
C
Raw Normal View History

KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
#ifndef __KVM_X86_LAPIC_H
#define __KVM_X86_LAPIC_H
KVM: move iodev.h from virt/kvm/ to include/kvm iodev.h contains definitions for the kvm_io_bus framework. This is needed both by the generic KVM code in virt/kvm as well as by architecture specific code under arch/. Putting the header file in virt/kvm and using local includes in the architecture part seems at least dodgy to me, so let's move the file into include/kvm, so that a more natural "#include <kvm/iodev.h>" can be used by all of the code. This also solves a problem later when using struct kvm_io_device in arm_vgic.h. Fixing up the FSF address in the GPL header and a wrong include path on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-26 07:39:29 -07:00
#include <kvm/iodev.h>
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
#include <linux/kvm_host.h>
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 04:42:34 -07:00
#define KVM_APIC_INIT 0
#define KVM_APIC_SIPI 1
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 08:01:50 -07:00
struct kvm_timer {
struct hrtimer timer;
s64 period; /* unit: ns */
KVM: x86: detect LVTT changes under APICv APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This means that apic_reg_write cannot use kvm_apic_get_reg to omit timer cancelation when mode changes. timer_mode_mask shouldn't be changing as it depends on cpuid. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 07:06:46 -07:00
u32 timer_mode;
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 08:01:50 -07:00
u32 timer_mode_mask;
u64 tscdeadline;
KVM: x86: add option to advance tscdeadline hrtimer expiration For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16 07:08:15 -07:00
u64 expired_tscdeadline;
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 08:01:50 -07:00
atomic_t pending; /* accumulated triggered timers */
};
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
struct kvm_lapic {
unsigned long base_address;
struct kvm_io_device dev;
KVM: unify part of generic timer handling Hide the internals of vcpu awakening / injection from the in-kernel emulated timers. This makes future changes in this logic easier and decreases the distance to more generic timer handling. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-23 06:57:41 -07:00
struct kvm_timer lapic_timer;
u32 divide_count;
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
struct kvm_vcpu *vcpu;
KVM: x86: detect SPIV changes under APICv APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This caused a bug if you used KVM_SET_IRQCHIP to set the SW-enabled bit in the SPIV register. The chain of events is as follows: * When the irqchip is added to the destination VM, the apic_sw_disabled static key is incremented (1) * When the KVM_SET_IRQCHIP ioctl is invoked, it is decremented (0) * When the guest disables the bit in the SPIV register, e.g. as part of shutdown, apic_set_spiv does not notice the change and the static key is _not_ incremented. * When the guest is destroyed, the static key is decremented (-1), resulting in this trace: WARNING: at kernel/jump_label.c:81 __static_key_slow_dec+0xa6/0xb0() jump label: negative count! [<ffffffff816bf898>] dump_stack+0x19/0x1b [<ffffffff8107c6f1>] warn_slowpath_common+0x61/0x80 [<ffffffff8107c76c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff811931e6>] __static_key_slow_dec+0xa6/0xb0 [<ffffffff81193226>] static_key_slow_dec_deferred+0x16/0x20 [<ffffffffa0637698>] kvm_free_lapic+0x88/0xa0 [kvm] [<ffffffffa061c63e>] kvm_arch_vcpu_uninit+0x2e/0xe0 [kvm] [<ffffffffa05ff301>] kvm_vcpu_uninit+0x21/0x40 [kvm] [<ffffffffa067cec7>] vmx_free_vcpu+0x47/0x70 [kvm_intel] [<ffffffffa061bc50>] kvm_arch_vcpu_free+0x50/0x60 [kvm] [<ffffffffa061ca22>] kvm_arch_destroy_vm+0x102/0x260 [kvm] [<ffffffff810b68fd>] ? synchronize_srcu+0x1d/0x20 [<ffffffffa06030d1>] kvm_put_kvm+0xe1/0x1c0 [kvm] [<ffffffffa06036f8>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff81215c62>] __fput+0x102/0x310 [<ffffffff81215f4e>] ____fput+0xe/0x10 [<ffffffff810ab664>] task_work_run+0xb4/0xe0 [<ffffffff81083944>] do_exit+0x304/0xc60 [<ffffffff816c8dfc>] ? _raw_spin_unlock_irq+0x2c/0x50 [<ffffffff810fd22d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8108432c>] do_group_exit+0x4c/0xc0 [<ffffffff810843b4>] SyS_exit_group+0x14/0x20 [<ffffffff816d33a9>] system_call_fastpath+0x16/0x1b Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 07:06:45 -07:00
bool sw_enabled;
KVM: Optimize searching for highest IRR Most of the time IRR is empty, so instead of scanning the whole IRR on each VM entry keep a variable that tells us if IRR is not empty. IRR will have to be scanned twice on each IRQ delivery, but this is much more rare than VM entry. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-11 01:06:51 -07:00
bool irr_pending;
KVM: optimize ISR lookups We perform ISR lookups twice: during interrupt injection and on EOI. Typical workloads only have a single bit set there. So we can avoid ISR scans by 1. counting bits as we set/clear them in ISR 2. on set, caching the injected vector number 3. on clear, invalidating the cache The real purpose of this is enabling PV EOI which needs to quickly validate the vector. But non PV guests also benefit: with this patch, and without interrupt nesting, apic_find_highest_isr will always return immediately without scanning ISR. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 09:24:26 -07:00
/* Number of bits set in ISR. */
s16 isr_count;
/* The highest vector set in ISR; if -1 - invalid, must scan ISR. */
int highest_isr_cache;
KVM: document lapic regs field Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 09:24:19 -07:00
/**
* APIC register page. The layout matches the register layout seen by
* the guest 1:1, because it is accessed by the vmx microcode.
* Note: Only one register, the TPR, is used by the microcode.
*/
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
void *regs;
KVM: Accelerated apic support This adds a mechanism for exposing the virtual apic tpr to the guest, and a protocol for letting the guest update the tpr without causing a vmexit if conditions allow (e.g. there is no interrupt pending with a higher priority than the new tpr). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-25 07:52:32 -07:00
gpa_t vapic_addr;
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368) In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-20 11:23:22 -07:00
struct gfn_to_hva_cache vapic_cache;
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 04:42:34 -07:00
unsigned long pending_events;
unsigned int sipi_vector;
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
};
int kvm_create_lapic(struct kvm_vcpu *vcpu);
void kvm_free_lapic(struct kvm_vcpu *vcpu);
int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu);
int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu);
int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu);
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 04:42:34 -07:00
void kvm_apic_accept_events(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
void kvm_lapic_reset(struct kvm_vcpu *vcpu);
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
KVM: APIC: avoid instruction emulation for EOI writes Instruction emulation for EOI writes can be skipped, since sane guest simply uses MOV instead of string operations. This is a nice improvement when guest doesn't support x2apic or hyper-V EOI support. a single VM bandwidth is observed with ~8% bandwidth improvement (7.4Gbps->8Gbps), by saving ~5% cycles from EOI emulation. Signed-off-by: Kevin Tian <kevin.tian@intel.com> <Based on earlier work from>: Signed-off-by: Eddie Dong <eddie.dong@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-30 03:56:17 -07:00
void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
KVM: add statics were possible, function definition in lapic.h Noticed by sparse: arch/x86/kvm/vmx.c:1583:6: warning: symbol 'vmx_disable_intercept_for_msr' was not declared. Should it be static? arch/x86/kvm/x86.c:3406:5: warning: symbol 'kvm_task_switch_16' was not declared. Should it be static? arch/x86/kvm/x86.c:3429:5: warning: symbol 'kvm_task_switch_32' was not declared. Should it be static? arch/x86/kvm/mmu.c:1968:6: warning: symbol 'kvm_mmu_remove_one_alloc_mmu_page' was not declared. Should it be static? arch/x86/kvm/mmu.c:2014:6: warning: symbol 'mmu_destroy_caches' was not declared. Should it be static? arch/x86/kvm/lapic.c:862:5: warning: symbol 'kvm_lapic_get_base' was not declared. Should it be static? arch/x86/kvm/i8254.c:94:5: warning: symbol 'pit_get_gate' was not declared. Should it be static? arch/x86/kvm/i8254.c:196:5: warning: symbol '__pit_timer_fn' was not declared. Should it be static? arch/x86/kvm/i8254.c:561:6: warning: symbol '__inject_pit_timer_intr' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:14:13 -07:00
u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
KVM: Add Directed EOI support to APIC emulation Directed EOI is specified by x2APIC, but is available even when lapic is in xAPIC mode. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-05 07:39:35 -07:00
void kvm_apic_set_version(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
KVM: Set TMR when programming ioapic entry We already know the trigger mode of a given interrupt when programming the ioapice entry. So it's not necessary to set it in each interrupt delivery. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 04:25:14 -07:00
void kvm_apic_update_tmr(struct kvm_vcpu *vcpu, u32 *tmr);
KVM: nVMX: Enable nested posted interrupt processing If vcpu has a interrupt in vmx non-root mode, injecting that interrupt requires a vmexit. With posted interrupt processing, the vmexit is not needed, and interrupts are fully taken care of by hardware. In nested vmx, this feature avoids much more vmexits than non-nested vmx. When L1 asks L0 to deliver L1's posted interrupt vector, and the target VCPU is in non-root mode, we use a physical ipi to deliver POSTED_INTR_NV to the target vCPU. Using POSTED_INTR_NV avoids unexpected interrupts if a concurrent vmexit happens and L1's vector is different with L0's. The IPI triggers posted interrupt processing in the target physical CPU. In case the target vCPU was not in guest mode, complete the posted interrupt delivery on the next entry to L2. Signed-off-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-03 08:58:17 -07:00
void __kvm_apic_update_irr(u32 *pir, void *regs);
KVM: VMX: Add the deliver posted interrupt algorithm Only deliver the posted interrupt when target vcpu is running and there is no previous interrupt pending in pir. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 04:25:15 -07:00
void kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir);
KVM: Return destination vcpu on interrupt injection Add a new parameter to know vcpus who received the interrupt. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 04:21:37 -07:00
int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
unsigned long *dest_map);
KVM: Expose kvm_lapic_local_deliver() Needed to deliver performance monitoring interrupts. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-10 05:57:21 -07:00
int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
KVM: optimize apic interrupt delivery Most interrupt are delivered to only one vcpu. Use pre-build tables to find interrupt destination instead of looping through all vcpus. In case of logical mode loop only through vcpus in a logical cluster irq is sent to. Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-13 07:19:24 -07:00
bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
KVM: Return destination vcpu on interrupt injection Add a new parameter to know vcpus who received the interrupt. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 04:21:37 -07:00
struct kvm_lapic_irq *irq, int *r, unsigned long *dest_map);
KVM: optimize apic interrupt delivery Most interrupt are delivered to only one vcpu. Use pre-build tables to find interrupt destination instead of looping through all vcpus. In case of logical mode loop only through vcpus in a logical cluster irq is sent to. Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-13 07:19:24 -07:00
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
KVM: x86: Validate guest writes to MSR_IA32_APICBASE Check for invalid state transitions on guest-initiated updates of MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is not supported and all invalid transitions as described in SDM section 10.12.5. It also checks that no reserved bit is set in APICBASE by the guest. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> [Use cpuid_maxphyaddr instead of guest_cpuid_get_phys_bits. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-24 08:48:44 -07:00
int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
KVM: correctly detect APIC SW state in kvm_apic_post_state_restore() For apic_set_spiv() to track APIC SW state correctly it needs to see previous and next values of the spurious vector register, but currently memset() overwrite the old value before apic_set_spiv() get a chance to do tracking. Fix it by calling apic_set_spiv() before overwriting old value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-08 05:24:36 -07:00
void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
struct kvm_lapic_state *s);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
KVM: emulate lapic tsc deadline timer for guest This patch emulate lapic tsc deadline timer for guest: Enumerate tsc deadline timer capability by CPUID; Enable tsc deadline timer mode by lapic MMIO; Start tsc deadline timer by WRMSR; [jan: use do_div()] [avi: fix for !irqchip_in_kernel()] [marcelo: another fix for !irqchip_in_kernel()] Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-22 01:55:52 -07:00
u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu);
void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data);
x86, apicv: add APICv register virtualization support - APIC read doesn't cause VM-Exit - APIC write becomes trap-like Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-24 19:18:49 -07:00
void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset);
x86, apicv: add virtual interrupt delivery support Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-24 19:18:51 -07:00
void kvm_apic_set_eoi_accelerated(struct kvm_vcpu *vcpu, int vector);
x86, apicv: add APICv register virtualization support - APIC read doesn't cause VM-Exit - APIC write becomes trap-like Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-24 19:18:49 -07:00
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368) In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-20 11:23:22 -07:00
int kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
KVM: Accelerated apic support This adds a mechanism for exposing the virtual apic tpr to the guest, and a protocol for letting the guest update the tpr without causing a vmexit if conditions allow (e.g. there is no interrupt pending with a higher priority than the new tpr). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-25 07:52:32 -07:00
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
KVM: x2apic interface to lapic This patch implements MSR interface to local apic as defines by x2apic Intel specification. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-05 07:39:36 -07:00
int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
KVM: Add HYPER-V apic access MSRs Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-17 06:51:23 -07:00
int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
{
return vcpu->arch.hv_vapic & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE;
}
KVM: host side for eoi optimization Implementation of PV EOI using shared memory. This reduces the number of exits an interrupt causes as much as by half. The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. We set it before injecting an interrupt and clear before injecting a nested one. Guest tests it using a test and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. There's a new MSR to set the address of said register in guest memory. Otherwise not much changed: - Guest EOI is not required - Register is tested & ISR is automatically cleared on exit For testing results see description of previous patch 'kvm_para: guest side for eoi avoidance'. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-24 09:25:07 -07:00
int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data);
KVM: use jump label to optimize checking for HW enabled APIC in APIC_BASE MSR Usually all APICs are HW enabled so the check can be optimized out. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 05:58:30 -07:00
void kvm_lapic_init(void);
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 05:58:33 -07:00
static inline u32 kvm_apic_get_reg(struct kvm_lapic *apic, int reg_off)
{
return *((u32 *) (apic->regs + reg_off));
}
extern struct static_key kvm_no_apic_vcpu;
static inline bool kvm_vcpu_has_lapic(struct kvm_vcpu *vcpu)
{
if (static_key_false(&kvm_no_apic_vcpu))
return vcpu->arch.apic;
return true;
}
extern struct static_key_deferred apic_hw_disabled;
static inline int kvm_apic_hw_enabled(struct kvm_lapic *apic)
{
if (static_key_false(&apic_hw_disabled.key))
return apic->vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE;
return MSR_IA32_APICBASE_ENABLE;
}
extern struct static_key_deferred apic_sw_disabled;
KVM: x86: optimize some accesses to LVTT and SPIV We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 07:06:47 -07:00
static inline bool kvm_apic_sw_enabled(struct kvm_lapic *apic)
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 05:58:33 -07:00
{
if (static_key_false(&apic_sw_disabled.key))
KVM: x86: optimize some accesses to LVTT and SPIV We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 07:06:47 -07:00
return apic->sw_enabled;
return true;
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 05:58:33 -07:00
}
static inline bool kvm_apic_present(struct kvm_vcpu *vcpu)
{
return kvm_vcpu_has_lapic(vcpu) && kvm_apic_hw_enabled(vcpu->arch.apic);
}
static inline int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
{
return kvm_apic_present(vcpu) && kvm_apic_sw_enabled(vcpu->arch.apic);
}
x86, apicv: add virtual x2apic support basically to benefit from apicv, we need to enable virtualized x2apic mode. Currently, we only enable it when guest is really using x2apic. Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic: 0x800 - 0x8ff: no read intercept for apicv register virtualization, except APIC ID and TMCCT which need software's assistance to get right value. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-24 19:18:50 -07:00
static inline int apic_x2apic_mode(struct kvm_lapic *apic)
{
return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
}
x86, apicv: add virtual interrupt delivery support Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-24 19:18:51 -07:00
static inline bool kvm_apic_vid_enabled(struct kvm *kvm)
{
return kvm_x86_ops->vm_has_apicv(kvm);
}
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 04:42:34 -07:00
static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu)
{
return vcpu->arch.apic->pending_events;
}
KVM: Add reset/restore rtc_status support restore rtc_status from migration or save/restore Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 04:21:38 -07:00
bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
KVM: x86: add option to advance tscdeadline hrtimer expiration For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16 07:08:15 -07:00
void wait_lapic_expire(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-16 22:59:56 -07:00
#endif
Copy Permalink