kevin/linux
1
Fork 0
Code
8e2b2b46ea
linux/drivers/leds/Makefile

47 lines
1.8 KiB
Makefile
Raw Normal View History

[PATCH] LED: add LED class Add the foundations of a new LEDs subsystem. This patch adds a class which presents LED devices within sysfs and allows their brightness to be controlled. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:04 -07:00
# LED Core
obj-$(CONFIG_NEW_LEDS) += led-core.o
obj-$(CONFIG_LEDS_CLASS) += led-class.o
[PATCH] LED: add LED trigger tupport Add support for LED triggers to the LED subsystem. "Triggers" are events which change the state of an LED. Two kinds of trigger are available, simple ones which can be added to exising code with minimum disruption and complex ones for implementing new or more complex functionality. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:05 -07:00
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
[PATCH] LED: add LED timer trigger Add an example of a complex LED trigger in the form of a generic timer which triggers the LED its attached to at a user specified frequency and duty cycle. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:07 -07:00
[PATCH] LED: add LED device support for the zaurus corgi and spitz models Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd, husky) and cxx00 (akita, spitz, borzoi) models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:09 -07:00
# LED Platform Drivers
PWM LED driver This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 05:21:22 -07:00
obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
leds: add BD2802GU LED driver ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-03-04 12:59:29 -07:00
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
[PATCH] LED: add LED device support for locomo devices Adds an LED driver for LEDs exported by the Sharp LOCOMO chip as found on some models of Sharp Zaurus. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:10 -07:00
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
leds: Add rb532 LED driver for the User LED Mikrotik built six LEDs into the Routerboard 532, from which one is destined for custom use, the so called "User LED". This patch adds a driver for it, based on the LEDs class. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-22 11:35:48 -07:00
obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
[PATCH] S3C24XX GPIO LED support GPIO LED support for Samsung S3C24XX SoC series processors. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10 22:54:00 -07:00
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
[PATCH] leds: Amstrad Delta LED support Use the new LED infrastructure to support the 6 LEDs present on the Amstrad Delta. [akpm@osdl.org: cleanup] Signed-off-by: Jonathan McDowell <noodles@earth.li> Ackde-by: Richard Purdie <rpurdie@rpsys.net> Cc: Ben Dooks <ben@fluff.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:05:33 -07:00
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
[PATCH] LED Class support for Soekris net48xx Add LED Class device support for the Soekris net48xx Error LED. Tested only on a net4801, but should work on a net4826 as well. I'd love to find a way of detecting a Soekris net48xx device but there is no DMI or any Soekris-specific PCI devices. [akpm@osdl.org: fixlets, cleanups] Signed-off-by: Chris Boot <bootc@bootc.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 04:45:34 -07:00
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
[PATCH] PCEngines WRAP LED Support A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are very similar to the Soekris net4801 (same NS SC1100 geode reference design). The LEDs on the WRAP are on different GPIO lines and I have modified and copied the net48xx error led support for this. It also includes support for an "extra" led (in addition to error). The three LEDs on the WRAP are at GPIO lines 2,3,18 (WRAP LEDs from left to right). This driver gives access to the second and third LEDs by twiddling GPIO lines 3 & 18. Because these boards are so similar to the net48xx, I basically sed-ed that driver to form the basis for leds-wrap.c. The only changes from leds-net48xx.c are: - #define WRAP_EXTRA_LED_GPIO - name changes - duplicate relevant sections to provide support for the "extra" led - reverse the various *_led_set values. The WRAP is "backwards" from the net48xx, and these needed to be updated for that. [akpm@osdl.org: build fix] Signed-off-by: Kristian Kielhofner <kris@krisk.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 21:37:28 -07:00
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
leds: ALIX.2 LEDs driver Driver for PC Engines ALIX.2 and ALIX.3 LEDs. Signed-off-by: Constantin Baranov <const@mimas.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-11-17 04:31:08 -07:00
obj-$(CONFIG_LEDS_ALIX2) += leds-alix2.o
leds: Add IPAQ h1940 LEDs support This patch adds the support for the IPAQ h1940 leds. In order to create the amber led (used for the battery charging), the red and green leds are set to the same default trigger. Due to hardware limitations, the blue led can only be set in blinking mode. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-12 16:09:32 -07:00
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
leds: Rename leds-cobalt driver The leds-cobalt driver only supports the Coable Qube series (not included in Cobalt Raq series). Rename the driver and update Kconfig/Makefile. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-20 16:02:47 -07:00
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
leds: Add Cobalt Raq series LEDs support Add Cobalt Raq series LEDs support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-27 01:51:05 -07:00
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
leds: Add driver for Sunfire UltraSPARC server LEDs. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 20:26:48 -07:00
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
leds: Add pca9532 led driver NXP pca9532 is a LED dimmer/controller attached to i2c bus. It allows attaching upto 16 leds which can either be on, off or dimmed and/or blinked with the two PWM modulators available. This driver is a "new-style" i2c driver that adheres to the driver model and implements the led framework api. Since the leds connected to the driver are platform specific, it is only useful when platform data is passed to the driver to define what leds are connected to which pins. Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-05-31 06:43:41 -07:00
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
leds: Add generic GPIO LED driver This patch adds support for GPIO connected leds via the new GPIO framework. Information about leds (gpio, polarity, name, default trigger) is passed to the driver via platform_data. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-27 12:49:53 -07:00
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
leds: LED driver for National Semiconductor LP3944 Funlight Chip LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-19 04:55:42 -07:00
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
leds: Add clevo notebook LED driver The driver supports the mail LED commonly found on different Clevo notebooks. The driver access the LED through the i8042 hardware which is handled by the input subsystem. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-31 03:46:41 -07:00
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
leds: Add HP Jornada 6xx driver Add support for the LEDs on the HP Jornada 620/660/680/690 devices. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 03:10:28 -07:00
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
leds: Add new driver for the LEDs on the Freecom FSG-3 The LEDs on the Freecom FSG-3 are connected to an external memory-mapped latch on the ixp4xx expansion bus, and therefore cannot be supported by any of the existing LEDs drivers. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 15:43:09 -07:00
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
leds: Add support for Philips PCA955x I2C LED drivers This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553 LED driver chips. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-16 14:49:55 -07:00
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
leds: da903x: Add support for LEDs found on DA9030/DA9034 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-13 01:06:10 -07:00
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
leds: Add WM831x status LED driver The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-05 06:09:21 -07:00
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
leds: Add WM8350 LED driver The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-12-04 09:52:33 -07:00
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
leds: simple driver for pwm driven LEDs Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-02-11 14:24:40 -07:00
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
leds: Add LED class driver for regulator driven LEDs. This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-07 07:08:13 -07:00
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
leds: LED driver for Intel NAS SS4200 series (v5) This code is based on a driver that came in the "Open-source and GPL components" download here: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent It was in a file called nasgpio.c inside of a second zip file called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this updated to use the LED subsystem with the ioctl and hardware monitor support removed. I don't have any need for brightness control, and its code is *completely* separate from the on/off controls implemented here. If anyone else wants it, I'd be happy to look into adding it, but I don't care enough for now. Except for the probe routines, I rewrote most of it. I also Note that I don't have any hardware documentation except for the original driver. Thanks go to Arjan for his help in getting the original source for this released and for chasing down some licensing issues. Signed-off-by: Dave Hansen <dave@sr71.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-01 15:43:32 -07:00
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
leds: Add driver for LT3593 controlled LEDs The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-14 17:59:35 -07:00
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
leds: Add driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-08 01:00:19 -07:00
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
[PATCH] LED: add LED device support for the zaurus corgi and spitz models Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd, husky) and cxx00 (akita, spitz, borzoi) models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:09 -07:00
leds: Add dac124s085 driver Add an LED driver using the DAC124S085 DAC from NatSemi [randy.dunlap@oracle.com: use header files for interfaces] Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-10 11:58:28 -07:00
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
[PATCH] LED: add LED timer trigger Add an example of a complex LED trigger in the form of a generic timer which triggers the LED its attached to at a user specified frequency and duty cycle. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:07 -07:00
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
[PATCH] LED: Add IDE disk activity LED trigger Add an LED trigger for IDE disk activity to the ide-disk driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:16 -07:00
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
[PATCH] LED: add LED heartbeat trigger Add an LED trigger acts like a heart beat. This can be used as a replacement of CONFIG_HEARTBEAT code exists in some arch's timer code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 05:49:15 -07:00
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
leds: Add backlight LED trigger This allows LEDs to be controlled as a backlight device where they turn off and on when the display is blanked and unblanked. This is useful where you need various key backlight LEDs to dim at the same time as the backlight. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-13 01:25:24 -07:00
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
leds: Add gpio-led trigger The gpio led trigger will allow leds to be triggered by gpio events. When we give the led a gpio number, the trigger will request_irq() on that so we don't have to keep polling for gpio state. It's useful for usecases as n810's keypad leds that could be triggered by the gpio event generated when user slides up to show the keypad. We also provide means for userland to tell us what is the desired brightness for that special led when it goes on so userland could use information from ambient light sensors and not set led brightness too high if it's not necessary. Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-02-17 04:18:11 -07:00
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
leds: Add default-on trigger Add a trigger which allows LEDs to default to the full brightness state. Signed-off-by: Nick Forbes <Nick.Forbes@huntsworth.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 16:06:52 -07:00
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
Copy Permalink