1
linux/fs/ocfs2/export.c

283 lines
6.5 KiB
C
Raw Normal View History

/* -*- mode: c; c-basic-offset: 8; -*-
* vim: noexpandtab sw=8 ts=8 sts=0:
*
* export.c
*
* Functions to facilitate NFS exporting
*
* Copyright (C) 2002, 2005 Oracle. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
#include <linux/fs.h>
#include <linux/types.h>
#define MLOG_MASK_PREFIX ML_EXPORT
#include <cluster/masklog.h>
#include "ocfs2.h"
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
#include "alloc.h"
#include "dir.h"
#include "dlmglue.h"
#include "dcache.h"
#include "export.h"
#include "inode.h"
#include "buffer_head_io.h"
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
#include "suballoc.h"
struct ocfs2_inode_handle
{
u64 ih_blkno;
u32 ih_generation;
};
static struct dentry *ocfs2_get_dentry(struct super_block *sb,
struct ocfs2_inode_handle *handle)
{
struct inode *inode;
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
struct ocfs2_super *osb = OCFS2_SB(sb);
u64 blkno = handle->ih_blkno;
int status, set;
struct dentry *result;
mlog_entry("(0x%p, 0x%p)\n", sb, handle);
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
if (blkno == 0) {
mlog(0, "nfs wants inode with blkno: 0\n");
result = ERR_PTR(-ESTALE);
goto bail;
}
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
inode = ocfs2_ilookup(sb, blkno);
/*
* If the inode exists in memory, we only need to check it's
* generation number
*/
if (inode)
goto check_gen;
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
/*
* This will synchronize us against ocfs2_delete_inode() on
* all nodes
*/
status = ocfs2_nfs_sync_lock(osb, 1);
if (status < 0) {
mlog(ML_ERROR, "getting nfs sync lock(EX) failed %d\n", status);
goto check_err;
}
status = ocfs2_test_inode_bit(osb, blkno, &set);
if (status < 0) {
if (status == -EINVAL) {
/*
* The blkno NFS gave us doesn't even show up
* as an inode, we return -ESTALE to be
* nice
*/
mlog(0, "test inode bit failed %d\n", status);
status = -ESTALE;
} else {
mlog(ML_ERROR, "test inode bit failed %d\n", status);
}
goto unlock_nfs_sync;
}
/* If the inode allocator bit is clear, this inode must be stale */
if (!set) {
mlog(0, "inode %llu suballoc bit is clear\n", blkno);
status = -ESTALE;
goto unlock_nfs_sync;
}
inode = ocfs2_iget(osb, blkno, 0, 0);
unlock_nfs_sync:
ocfs2_nfs_sync_unlock(osb, 1);
check_err:
if (status < 0) {
if (status == -ESTALE) {
mlog(0, "stale inode ino: %llu generation: %u\n",
blkno, handle->ih_generation);
}
result = ERR_PTR(status);
goto bail;
}
if (IS_ERR(inode)) {
mlog_errno(PTR_ERR(inode));
result = (void *)inode;
goto bail;
}
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
check_gen:
if (handle->ih_generation != inode->i_generation) {
iput(inode);
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
handle->ih_generation);
result = ERR_PTR(-ESTALE);
goto bail;
}
result = d_obtain_alias(inode);
if (!IS_ERR(result))
result->d_op = &ocfs2_dentry_ops;
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
else
mlog_errno(PTR_ERR(result));
ocfs2: fix rare stale inode errors when exporting via nfs For nfs exporting, ocfs2_get_dentry() returns the dentry for fh. ocfs2_get_dentry() may read from disk when the inode is not in memory, without any cross cluster lock. this leads to the file system loading a stale inode. This patch fixes above problem. Solution is that in case of inode is not in memory, we get the cluster lock(PR) of alloc inode where the inode in question is allocated from (this causes node on which deletion is done sync the alloc inode) before reading out the inode itsself. then we check the bitmap in the group (the inode in question allcated from) to see if the bit is clear. if it's clear then it's stale. if the bit is set, we then check generation as the existing code does. We have to read out the inode in question from disk first to know its alloc slot and allot bit. And if its not stale we read it out using ocfs2_iget(). The second read should then be from cache. And also we have to add a per superblock nfs_sync_lock to cover the lock for alloc inode and that for inode in question. this is because ocfs2_get_dentry() and ocfs2_delete_inode() lock on them in reverse order. nfs_sync_lock is locked in EX mode in ocfs2_get_dentry() and in PR mode in ocfs2_delete_inode(). so that mutliple ocfs2_delete_inode() can run concurrently in normal case. [mfasheh@suse.com: build warning fixes and comment cleanups] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-03-06 06:29:10 -07:00
bail:
mlog_exit_ptr(result);
return result;
}
static struct dentry *ocfs2_get_parent(struct dentry *child)
{
int status;
u64 blkno;
struct dentry *parent;
struct inode *dir = child->d_inode;
mlog_entry("(0x%p, '%.*s')\n", child,
child->d_name.len, child->d_name.name);
mlog(0, "find parent of directory %llu\n",
(unsigned long long)OCFS2_I(dir)->ip_blkno);
status = ocfs2_inode_lock(dir, NULL, 0);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
parent = ERR_PTR(status);
goto bail;
}
status = ocfs2_lookup_ino_from_name(dir, "..", 2, &blkno);
if (status < 0) {
parent = ERR_PTR(-ENOENT);
goto bail_unlock;
}
parent = d_obtain_alias(ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0));
if (!IS_ERR(parent))
parent->d_op = &ocfs2_dentry_ops;
bail_unlock:
ocfs2_inode_unlock(dir, 0);
bail:
mlog_exit_ptr(parent);
return parent;
}
static int ocfs2_encode_fh(struct dentry *dentry, u32 *fh_in, int *max_len,
int connectable)
{
struct inode *inode = dentry->d_inode;
int len = *max_len;
int type = 1;
u64 blkno;
u32 generation;
__le32 *fh = (__force __le32 *) fh_in;
mlog_entry("(0x%p, '%.*s', 0x%p, %d, %d)\n", dentry,
dentry->d_name.len, dentry->d_name.name,
fh, len, connectable);
if (len < 3 || (connectable && len < 6)) {
mlog(ML_ERROR, "fh buffer is too small for encoding\n");
type = 255;
goto bail;
}
blkno = OCFS2_I(inode)->ip_blkno;
generation = inode->i_generation;
mlog(0, "Encoding fh: blkno: %llu, generation: %u\n",
(unsigned long long)blkno, generation);
len = 3;
fh[0] = cpu_to_le32((u32)(blkno >> 32));
fh[1] = cpu_to_le32((u32)(blkno & 0xffffffff));
fh[2] = cpu_to_le32(generation);
if (connectable && !S_ISDIR(inode->i_mode)) {
struct inode *parent;
spin_lock(&dentry->d_lock);
parent = dentry->d_parent->d_inode;
blkno = OCFS2_I(parent)->ip_blkno;
generation = parent->i_generation;
fh[3] = cpu_to_le32((u32)(blkno >> 32));
fh[4] = cpu_to_le32((u32)(blkno & 0xffffffff));
fh[5] = cpu_to_le32(generation);
spin_unlock(&dentry->d_lock);
len = 6;
type = 2;
mlog(0, "Encoding parent: blkno: %llu, generation: %u\n",
(unsigned long long)blkno, generation);
}
*max_len = len;
bail:
mlog_exit(type);
return type;
}
static struct dentry *ocfs2_fh_to_dentry(struct super_block *sb,
struct fid *fid, int fh_len, int fh_type)
{
struct ocfs2_inode_handle handle;
if (fh_len < 3 || fh_type > 2)
return NULL;
handle.ih_blkno = (u64)le32_to_cpu(fid->raw[0]) << 32;
handle.ih_blkno |= (u64)le32_to_cpu(fid->raw[1]);
handle.ih_generation = le32_to_cpu(fid->raw[2]);
return ocfs2_get_dentry(sb, &handle);
}
static struct dentry *ocfs2_fh_to_parent(struct super_block *sb,
struct fid *fid, int fh_len, int fh_type)
{
struct ocfs2_inode_handle parent;
if (fh_type != 2 || fh_len < 6)
return NULL;
parent.ih_blkno = (u64)le32_to_cpu(fid->raw[3]) << 32;
parent.ih_blkno |= (u64)le32_to_cpu(fid->raw[4]);
parent.ih_generation = le32_to_cpu(fid->raw[5]);
return ocfs2_get_dentry(sb, &parent);
}
const struct export_operations ocfs2_export_ops = {
.encode_fh = ocfs2_encode_fh,
.fh_to_dentry = ocfs2_fh_to_dentry,
.fh_to_parent = ocfs2_fh_to_parent,
.get_parent = ocfs2_get_parent,
};