kevin/linux
1
Fork 0
Code
8b8ca9c25f
linux/fs/ceph/export.c

608 lines
14 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 07:07:57 -07:00
// SPDX-License-Identifier: GPL-2.0
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 15:14:15 -07:00
#include <linux/ceph/ceph_debug.h>
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
#include <linux/exportfs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 01:04:11 -07:00
#include <linux/slab.h>
move asm/unaligned.h to linux/unaligned.h asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-01 12:35:57 -07:00
#include <linux/unaligned.h>
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-06 15:14:15 -07:00
#include "mds_client.h"
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
#include "crypto.h"
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
/*
* Basic fh
*/
struct ceph_nfs_fh {
u64 ino;
} __attribute__ ((packed));
/*
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
* Larger fh that includes parent ino.
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
*/
struct ceph_nfs_confh {
u64 ino, parent_ino;
} __attribute__ ((packed));
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
/*
* fh for snapped inode
*/
struct ceph_nfs_snapfh {
u64 ino;
u64 snapid;
u64 parent_ino;
u32 hash;
} __attribute__ ((packed));
static int ceph_encode_snapfh(struct inode *inode, u32 *rawfh, int *max_len,
struct inode *parent_inode)
{
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_client *cl = ceph_inode_to_client(inode);
ceph: move static keyword to the front of declarations Move the static keyword to the front of declarations of snap_handle_length, handle_length and connected_handle_length, and resolve the following compiler warnings that can be seen when building with warnings enabled (W=1): fs/ceph/export.c:38:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:88:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:90:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-31 14:57:12 -07:00
static const int snap_handle_length =
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
sizeof(struct ceph_nfs_snapfh) >> 2;
struct ceph_nfs_snapfh *sfh = (void *)rawfh;
u64 snapid = ceph_snap(inode);
int ret;
bool no_parent = true;
if (*max_len < snap_handle_length) {
*max_len = snap_handle_length;
ret = FILEID_INVALID;
goto out;
}
ret = -EINVAL;
if (snapid != CEPH_SNAPDIR) {
struct inode *dir;
struct dentry *dentry = d_find_alias(inode);
if (!dentry)
goto out;
rcu_read_lock();
dir = d_inode_rcu(dentry->d_parent);
if (ceph_snap(dir) != CEPH_SNAPDIR) {
sfh->parent_ino = ceph_ino(dir);
sfh->hash = ceph_dentry_hash(dir, dentry);
no_parent = false;
}
rcu_read_unlock();
dput(dentry);
}
if (no_parent) {
if (!S_ISDIR(inode->i_mode))
goto out;
sfh->parent_ino = sfh->ino;
sfh->hash = 0;
}
sfh->ino = ceph_ino(inode);
sfh->snapid = snapid;
*max_len = snap_handle_length;
ret = FILEID_BTRFS_WITH_PARENT;
out:
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "%p %llx.%llx ret=%d\n", inode, ceph_vinop(inode), ret);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return ret;
}
ceph: move encode_fh to new API Use parent_inode has a flag for whether nfsd wants a connectable fh, but generate one opportunistically so that we can take advantage of the additional info in there. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-05 12:07:36 -07:00
static int ceph_encode_fh(struct inode *inode, u32 *rawfh, int *max_len,
struct inode *parent_inode)
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
{
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_client *cl = ceph_inode_to_client(inode);
ceph: move static keyword to the front of declarations Move the static keyword to the front of declarations of snap_handle_length, handle_length and connected_handle_length, and resolve the following compiler warnings that can be seen when building with warnings enabled (W=1): fs/ceph/export.c:38:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:88:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:90:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-31 14:57:12 -07:00
static const int handle_length =
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
sizeof(struct ceph_nfs_fh) >> 2;
ceph: move static keyword to the front of declarations Move the static keyword to the front of declarations of snap_handle_length, handle_length and connected_handle_length, and resolve the following compiler warnings that can be seen when building with warnings enabled (W=1): fs/ceph/export.c:38:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:88:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] fs/ceph/export.c:90:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-31 14:57:12 -07:00
static const int connected_handle_length =
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
sizeof(struct ceph_nfs_confh) >> 2;
ceph: Fix return value of encode_fh function encode_fh function should return 255 on error as done by other file system to indicate EOVERFLOW. Also max_len is in sizeof(u32) units and not in bytes. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-05 03:33:41 -07:00
int type;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
if (ceph_snap(inode) != CEPH_NOSNAP)
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return ceph_encode_snapfh(inode, rawfh, max_len, parent_inode);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
if (parent_inode && (*max_len < connected_handle_length)) {
*max_len = connected_handle_length;
return FILEID_INVALID;
} else if (*max_len < handle_length) {
*max_len = handle_length;
return FILEID_INVALID;
}
ceph: fix dentry reference leak in ceph_encode_fh() dput() was not called in the error path. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Cc: Sage Weil <sage@inktank.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 15:21:23 -07:00
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
if (parent_inode) {
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct ceph_nfs_confh *cfh = (void *)rawfh;
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "%p %llx.%llx with parent %p %llx.%llx\n", inode,
ceph_vinop(inode), parent_inode, ceph_vinop(parent_inode));
ceph: move encode_fh to new API Use parent_inode has a flag for whether nfsd wants a connectable fh, but generate one opportunistically so that we can take advantage of the additional info in there. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-05 12:07:36 -07:00
cfh->ino = ceph_ino(inode);
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
cfh->parent_ino = ceph_ino(parent_inode);
ceph: Fix return value of encode_fh function encode_fh function should return 255 on error as done by other file system to indicate EOVERFLOW. Also max_len is in sizeof(u32) units and not in bytes. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-05 03:33:41 -07:00
*max_len = connected_handle_length;
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
type = FILEID_INO32_GEN_PARENT;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
} else {
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct ceph_nfs_fh *fh = (void *)rawfh;
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "%p %llx.%llx\n", inode, ceph_vinop(inode));
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
fh->ino = ceph_ino(inode);
ceph: Update max_len with minimum required size encode_fh on error should update max_len with minimum required size, so that caller can redo the call with the reallocated buffer. This is required with open by handle patch series Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-05 03:33:42 -07:00
*max_len = handle_length;
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
type = FILEID_INO32_GEN;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
}
return type;
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
static struct inode *__lookup_inode(struct super_block *sb, u64 ino)
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
{
ceph: rename _to_client() to _to_fs_client() We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 19:50:38 -07:00
struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
struct inode *inode;
struct ceph_vino vino;
int err;
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
vino.ino = ino;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
vino.snap = CEPH_NOSNAP;
ceph: don't allow access to MDS-private inodes The MDS reserves a set of inodes for its own usage, and these should never be accessible to clients. Add a new helper to vet a proposed inode number against that range, and complain loudly and refuse to create or look it up if it's in it. Also, ensure that the MDS doesn't try to delegate inodes that are in that range or lower. Print a warning if it does, and don't save the range in the xarray. URL: https://tracker.ceph.com/issues/49922 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-01 10:55:11 -07:00
if (ceph_vino_is_reserved(vino))
return ERR_PTR(-ESTALE);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
inode = ceph_find_inode(sb, vino);
ceph: use LOOKUPINO to make unconnected nfs fh more reliable If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:31:40 -07:00
if (!inode) {
struct ceph_mds_request *req;
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-06 19:34:50 -07:00
int mask;
ceph: use LOOKUPINO to make unconnected nfs fh more reliable If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:31:40 -07:00
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPINO,
USE_ANY_MDS);
if (IS_ERR(req))
return ERR_CAST(req);
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-06 19:34:50 -07:00
mask = CEPH_STAT_CAP_INODE;
if (ceph_security_xattr_wanted(d_inode(sb->s_root)))
mask |= CEPH_CAP_XATTR_SHARED;
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
req->r_args.lookupino.mask = cpu_to_le32(mask);
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-06 19:34:50 -07:00
ceph: use LOOKUPINO to make unconnected nfs fh more reliable If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:31:40 -07:00
req->r_ino1 = vino;
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph: avoid inode lookup on nfs fh reconnect If we get the inode from the MDS, we have a reference in req; don't do a fresh lookup. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:35:00 -07:00
inode = req->r_target_inode;
if (inode)
ceph: use ihold when we already have an inode ref We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-27 09:24:26 -07:00
ihold(inode);
ceph: use LOOKUPINO to make unconnected nfs fh more reliable If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:31:40 -07:00
ceph_mdsc_put_request(req);
if (!inode)
ceph: factor out ceph_lookup_inode() This function will be used by __fh_to_dentry and by the quotas code, to find quota realm inodes that are not visible in the mountpoint. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-21 03:20:09 -07:00
return err < 0 ? ERR_PTR(err) : ERR_PTR(-ESTALE);
ceph: shut down access to inode when async create fails Add proper error handling for when an async create fails. The inode never existed, so any dirty caps or data are now toast. We already d_drop the dentry in that case, but the now-stale inode may still be around. We want to shut down access to these inodes, and ensure that they can't harbor any more dirty data, which can cause problems at umount time. When this occurs, flag such inodes as being SHUTDOWN, and trash any caps and cap flushes that may be in flight for them, and invalidate the pagecache for the inode. Add a new helper that can check whether an inode or an entire mount is now shut down, and call it instead of accessing the mount_state directly in places where we test that now. URL: https://tracker.ceph.com/issues/51279 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-31 10:39:13 -07:00
} else {
if (ceph_inode_is_shutdown(inode)) {
iput(inode);
return ERR_PTR(-ESTALE);
}
ceph: use LOOKUPINO to make unconnected nfs fh more reliable If we are unable to locate an inode by ino, ask the MDS using the new LOOKUPINO command. Signed-off-by: Sage Weil <sage@newdream.net>
2011-04-06 09:31:40 -07:00
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return inode;
}
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct inode *ceph_lookup_inode(struct super_block *sb, u64 ino)
{
struct inode *inode = __lookup_inode(sb, ino);
if (IS_ERR(inode))
return inode;
if (inode->i_nlink == 0) {
iput(inode);
return ERR_PTR(-ESTALE);
}
ceph: factor out ceph_lookup_inode() This function will be used by __fh_to_dentry and by the quotas code, to find quota realm inodes that are not visible in the mountpoint. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-21 03:20:09 -07:00
return inode;
}
static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino)
{
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct inode *inode = __lookup_inode(sb, ino);
ceph: fail the open_by_handle_at() if the dentry is being unlinked When unlinking a file the kclient will send a unlink request to MDS by holding the dentry reference, and then the MDS will return 2 replies, which are unsafe reply and a deferred safe reply. After the unsafe reply received the kernel will return and succeed the unlink request to user space apps. Only when the safe reply received the dentry's reference will be released. Or the dentry will only be unhashed from dcache. But when the open_by_handle_at() begins to open the unlinked files it will succeed. The inode->i_count couldn't be used to check whether the inode is opened or not. Link: https://tracker.ceph.com/issues/56524 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luís Henriques <lhenriques@suse.de> Tested-by: Luís Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-30 07:49:36 -07:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: don't return -ESTALE if there's still an open file Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing: - name_to_handle_at("/cephfs/myfile") - open("/cephfs/myfile") - unlink("/cephfs/myfile") - sync; sync; - drop caches - open_by_handle_at() The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1. This patch also makes sure we have LINK caps before checking i_nlink. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-18 10:47:26 -07:00
int err;
ceph: factor out ceph_lookup_inode() This function will be used by __fh_to_dentry and by the quotas code, to find quota realm inodes that are not visible in the mountpoint. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-21 03:20:09 -07:00
if (IS_ERR(inode))
return ERR_CAST(inode);
ceph: don't return -ESTALE if there's still an open file Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing: - name_to_handle_at("/cephfs/myfile") - open("/cephfs/myfile") - unlink("/cephfs/myfile") - sync; sync; - drop caches - open_by_handle_at() The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1. This patch also makes sure we have LINK caps before checking i_nlink. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-18 10:47:26 -07:00
/* We need LINK caps to reliably check i_nlink */
err = ceph_do_getattr(inode, CEPH_CAP_LINK_SHARED, false);
ceph: fix inode leak on getattr error in __fh_to_dentry Fixes: 878dabb64117 ("ceph: don't return -ESTALE if there's still an open file") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-03-26 06:21:53 -07:00
if (err) {
iput(inode);
ceph: don't return -ESTALE if there's still an open file Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing: - name_to_handle_at("/cephfs/myfile") - open("/cephfs/myfile") - unlink("/cephfs/myfile") - sync; sync; - drop caches - open_by_handle_at() The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1. This patch also makes sure we have LINK caps before checking i_nlink. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-18 10:47:26 -07:00
return ERR_PTR(err);
ceph: fix inode leak on getattr error in __fh_to_dentry Fixes: 878dabb64117 ("ceph: don't return -ESTALE if there's still an open file") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-03-26 06:21:53 -07:00
}
ceph: don't return -ESTALE if there's still an open file Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing: - name_to_handle_at("/cephfs/myfile") - open("/cephfs/myfile") - unlink("/cephfs/myfile") - sync; sync; - drop caches - open_by_handle_at() The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1. This patch also makes sure we have LINK caps before checking i_nlink. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-05-18 10:47:26 -07:00
/* -ESTALE if inode as been unlinked and no file is open */
ceph: fail the open_by_handle_at() if the dentry is being unlinked When unlinking a file the kclient will send a unlink request to MDS by holding the dentry reference, and then the MDS will return 2 replies, which are unsafe reply and a deferred safe reply. After the unsafe reply received the kernel will return and succeed the unlink request to user space apps. Only when the safe reply received the dentry's reference will be released. Or the dentry will only be unhashed from dcache. But when the open_by_handle_at() begins to open the unlinked files it will succeed. The inode->i_count couldn't be used to check whether the inode is opened or not. Link: https://tracker.ceph.com/issues/56524 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luís Henriques <lhenriques@suse.de> Tested-by: Luís Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-30 07:49:36 -07:00
if ((inode->i_nlink == 0) && !__ceph_is_file_opened(ci)) {
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
iput(inode);
return ERR_PTR(-ESTALE);
}
ceph: switch to use of ->d_init() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-28 19:05:13 -07:00
return d_obtain_alias(inode);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
static struct dentry *__snapfh_to_dentry(struct super_block *sb,
struct ceph_nfs_snapfh *sfh,
bool want_parent)
{
ceph: rename _to_client() to _to_fs_client() We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 19:50:38 -07:00
struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_client *cl = mdsc->fsc->client;
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct ceph_mds_request *req;
struct inode *inode;
struct ceph_vino vino;
int mask;
int err;
bool unlinked = false;
if (want_parent) {
vino.ino = sfh->parent_ino;
if (sfh->snapid == CEPH_SNAPDIR)
vino.snap = CEPH_NOSNAP;
else if (sfh->ino == sfh->parent_ino)
vino.snap = CEPH_SNAPDIR;
else
vino.snap = sfh->snapid;
} else {
vino.ino = sfh->ino;
vino.snap = sfh->snapid;
}
ceph: don't allow access to MDS-private inodes The MDS reserves a set of inodes for its own usage, and these should never be accessible to clients. Add a new helper to vet a proposed inode number against that range, and complain loudly and refuse to create or look it up if it's in it. Also, ensure that the MDS doesn't try to delegate inodes that are in that range or lower. Print a warning if it does, and don't save the range in the xarray. URL: https://tracker.ceph.com/issues/49922 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-01 10:55:11 -07:00
if (ceph_vino_is_reserved(vino))
return ERR_PTR(-ESTALE);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
inode = ceph_find_inode(sb, vino);
ceph: shut down access to inode when async create fails Add proper error handling for when an async create fails. The inode never existed, so any dirty caps or data are now toast. We already d_drop the dentry in that case, but the now-stale inode may still be around. We want to shut down access to these inodes, and ensure that they can't harbor any more dirty data, which can cause problems at umount time. When this occurs, flag such inodes as being SHUTDOWN, and trash any caps and cap flushes that may be in flight for them, and invalidate the pagecache for the inode. Add a new helper that can check whether an inode or an entire mount is now shut down, and call it instead of accessing the mount_state directly in places where we test that now. URL: https://tracker.ceph.com/issues/51279 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-31 10:39:13 -07:00
if (inode) {
if (ceph_inode_is_shutdown(inode)) {
iput(inode);
return ERR_PTR(-ESTALE);
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return d_obtain_alias(inode);
ceph: shut down access to inode when async create fails Add proper error handling for when an async create fails. The inode never existed, so any dirty caps or data are now toast. We already d_drop the dentry in that case, but the now-stale inode may still be around. We want to shut down access to these inodes, and ensure that they can't harbor any more dirty data, which can cause problems at umount time. When this occurs, flag such inodes as being SHUTDOWN, and trash any caps and cap flushes that may be in flight for them, and invalidate the pagecache for the inode. Add a new helper that can check whether an inode or an entire mount is now shut down, and call it instead of accessing the mount_state directly in places where we test that now. URL: https://tracker.ceph.com/issues/51279 Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-31 10:39:13 -07:00
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPINO,
USE_ANY_MDS);
if (IS_ERR(req))
return ERR_CAST(req);
mask = CEPH_STAT_CAP_INODE;
if (ceph_security_xattr_wanted(d_inode(sb->s_root)))
mask |= CEPH_CAP_XATTR_SHARED;
req->r_args.lookupino.mask = cpu_to_le32(mask);
if (vino.snap < CEPH_NOSNAP) {
req->r_args.lookupino.snapid = cpu_to_le64(vino.snap);
if (!want_parent && sfh->ino != sfh->parent_ino) {
req->r_args.lookupino.parent =
cpu_to_le64(sfh->parent_ino);
req->r_args.lookupino.hash =
cpu_to_le32(sfh->hash);
}
}
req->r_ino1 = vino;
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode) {
if (vino.snap == CEPH_SNAPDIR) {
if (inode->i_nlink == 0)
unlinked = true;
inode = ceph_get_snapdir(inode);
} else if (ceph_snap(inode) == vino.snap) {
ihold(inode);
} else {
/* mds does not support lookup snapped inode */
ceph: fix up error handling with snapdirs There are several warts in the snapdir error handling. The -EOPNOTSUPP return in __snapfh_to_dentry is currently lost, and the call to ceph_handle_snapdir is not currently checked at all. Fix all of this up and eliminate a BUG_ON in ceph_get_snapdir. We can handle that case with a warning and return an error. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-02-25 13:04:15 -07:00
inode = ERR_PTR(-EOPNOTSUPP);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
}
ceph: fix up error handling with snapdirs There are several warts in the snapdir error handling. The -EOPNOTSUPP return in __snapfh_to_dentry is currently lost, and the call to ceph_handle_snapdir is not currently checked at all. Fix all of this up and eliminate a BUG_ON in ceph_get_snapdir. We can handle that case with a warning and return an error. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-02-25 13:04:15 -07:00
} else {
inode = ERR_PTR(-ESTALE);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
}
ceph_mdsc_put_request(req);
if (want_parent) {
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "%llx.%llx\n err=%d\n", vino.ino, vino.snap, err);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
} else {
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "%llx.%llx parent %llx hash %x err=%d", vino.ino,
vino.snap, sfh->parent_ino, sfh->hash, err);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
}
/* see comments in ceph_get_parent() */
return unlinked ? d_obtain_root(inode) : d_obtain_alias(inode);
}
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
/*
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
* convert regular fh to dentry
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
*/
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
static struct dentry *ceph_fh_to_dentry(struct super_block *sb,
struct fid *fid,
int fh_len, int fh_type)
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
{
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
struct ceph_nfs_fh *fh = (void *)fid->raw;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
if (fh_type == FILEID_BTRFS_WITH_PARENT) {
struct ceph_nfs_snapfh *sfh = (void *)fid->raw;
return __snapfh_to_dentry(sb, sfh, false);
}
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
if (fh_type != FILEID_INO32_GEN &&
fh_type != FILEID_INO32_GEN_PARENT)
return NULL;
if (fh_len < sizeof(*fh) / 4)
return NULL;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(fsc->client, "%llx\n", fh->ino);
ceph: simplify ceph_fh_to_dentry() MDS handles LOOKUPHASH and LOOKUPINO MDS requests in the same way. So __cfh_to_dentry() is redundant. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 03:05:41 -07:00
return __fh_to_dentry(sb, fh->ino);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
}
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
static struct dentry *__get_parent(struct super_block *sb,
struct dentry *child, u64 ino)
{
ceph: rename _to_client() to _to_fs_client() We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 19:50:38 -07:00
struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
struct ceph_mds_request *req;
struct inode *inode;
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-06 19:34:50 -07:00
int mask;
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
int err;
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPPARENT,
USE_ANY_MDS);
if (IS_ERR(req))
return ERR_CAST(req);
if (child) {
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-17 15:25:59 -07:00
req->r_inode = d_inode(child);
ihold(d_inode(child));
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
} else {
req->r_ino1 = (struct ceph_vino) {
.ino = ino,
.snap = CEPH_NOSNAP,
};
}
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-06 19:34:50 -07:00
mask = CEPH_STAT_CAP_INODE;
if (ceph_security_xattr_wanted(d_inode(sb->s_root)))
mask |= CEPH_CAP_XATTR_SHARED;
req->r_args.getattr.mask = cpu_to_le32(mask);
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph: return ceph_mdsc_do_request() errors from __get_parent() Return the error returned by ceph_mdsc_do_request(). Otherwise, r_target_inode ends up being NULL this ends up returning ENOENT regardless of the error. Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-05 18:34:20 -07:00
if (err) {
ceph_mdsc_put_request(req);
return ERR_PTR(err);
}
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
inode = req->r_target_inode;
if (inode)
ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(-ENOENT);
ceph: switch to use of ->d_init() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-28 19:05:13 -07:00
return d_obtain_alias(inode);
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
}
ceph: ceph_get_parent() can be static Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-08 23:11:31 -07:00
static struct dentry *ceph_get_parent(struct dentry *child)
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
{
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct inode *inode = d_inode(child);
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_client *cl = ceph_inode_to_client(inode);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct dentry *dn;
if (ceph_snap(inode) != CEPH_NOSNAP) {
struct inode* dir;
bool unlinked = false;
/* do not support non-directory */
if (!d_is_dir(child)) {
dn = ERR_PTR(-EINVAL);
goto out;
}
dir = __lookup_inode(inode->i_sb, ceph_ino(inode));
if (IS_ERR(dir)) {
dn = ERR_CAST(dir);
goto out;
}
/* There can be multiple paths to access snapped inode.
* For simplicity, treat snapdir of head inode as parent */
if (ceph_snap(inode) != CEPH_SNAPDIR) {
struct inode *snapdir = ceph_get_snapdir(dir);
if (dir->i_nlink == 0)
unlinked = true;
iput(dir);
if (IS_ERR(snapdir)) {
dn = ERR_CAST(snapdir);
goto out;
}
dir = snapdir;
}
/* If directory has already been deleted, futher get_parent
* will fail. Do not mark snapdir dentry as disconnected,
* this prevent exportfs from doing futher get_parent. */
if (unlinked)
dn = d_obtain_root(dir);
else
dn = d_obtain_alias(dir);
} else {
dn = __get_parent(child->d_sb, child, 0);
}
out:
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(cl, "child %p %p %llx.%llx err=%ld\n", child, inode,
ceph_vinop(inode), (long)PTR_ERR_OR_ZERO(dn));
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return dn;
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
}
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
/*
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
* convert regular fh to parent
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
*/
static struct dentry *ceph_fh_to_parent(struct super_block *sb,
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
struct fid *fid,
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
int fh_len, int fh_type)
{
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
struct ceph_nfs_confh *cfh = (void *)fid->raw;
struct dentry *dentry;
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
if (fh_type == FILEID_BTRFS_WITH_PARENT) {
struct ceph_nfs_snapfh *sfh = (void *)fid->raw;
return __snapfh_to_dentry(sb, sfh, true);
}
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
if (fh_type != FILEID_INO32_GEN_PARENT)
return NULL;
tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(), u64 inum = fid->raw[2]; which is unhelpfully reported as at the end of shmem_alloc_inode(): BUG: unable to handle kernel paging request at ffff880061cd3000 IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Call Trace: [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6 Right, tmpfs is being stupid to access fid->raw[2] before validating that fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may fall at the end of a page, and the next page not be present. But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and could oops in the same way: add the missing fh_len checks to those. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Sage Weil <sage@inktank.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-07 20:32:51 -07:00
if (fh_len < sizeof(*cfh) / 4)
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
return NULL;
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(fsc->client, "%llx\n", cfh->parent_ino);
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
dentry = __get_parent(sb, NULL, cfh->ino);
ceph: fix d_obtain_alias() misuses on failure d_obtain_alias() will have done iput() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-24 20:49:03 -07:00
if (unlikely(dentry == ERR_PTR(-ENOENT)))
ceph: fix ceph_fh_to_parent() ceph_fh_to_parent() returns dentry that corresponds to the 'ino' field of struct ceph_nfs_confh. This is wrong, it should return dentry that corresponds to the 'parent_ino' field. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 08:09:05 -07:00
dentry = __fh_to_dentry(sb, cfh->parent_ino);
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
return dentry;
}
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
static int __get_snap_name(struct dentry *parent, char *name,
struct dentry *child)
{
struct inode *inode = d_inode(child);
struct inode *dir = d_inode(parent);
ceph: rename _to_client() to _to_fs_client() We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 19:50:38 -07:00
struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct ceph_mds_request *req = NULL;
char *last_name = NULL;
unsigned next_offset = 2;
int err = -EINVAL;
if (ceph_ino(inode) != ceph_ino(dir))
goto out;
if (ceph_snap(inode) == CEPH_SNAPDIR) {
if (ceph_snap(dir) == CEPH_NOSNAP) {
strcpy(name, fsc->mount_options->snapdir_name);
err = 0;
}
goto out;
}
if (ceph_snap(dir) != CEPH_SNAPDIR)
goto out;
while (1) {
struct ceph_mds_reply_info_parsed *rinfo;
struct ceph_mds_reply_dir_entry *rde;
int i;
req = ceph_mdsc_create_request(fsc->mdsc, CEPH_MDS_OP_LSSNAP,
USE_AUTH_MDS);
if (IS_ERR(req)) {
err = PTR_ERR(req);
req = NULL;
goto out;
}
err = ceph_alloc_readdir_reply_buffer(req, inode);
if (err)
goto out;
req->r_direct_mode = USE_AUTH_MDS;
req->r_readdir_offset = next_offset;
req->r_args.readdir.flags =
cpu_to_le16(CEPH_READDIR_REPLY_BITFLAGS);
if (last_name) {
req->r_path2 = last_name;
last_name = NULL;
}
req->r_inode = dir;
ihold(dir);
req->r_dentry = dget(parent);
inode_lock(dir);
err = ceph_mdsc_do_request(fsc->mdsc, NULL, req);
inode_unlock(dir);
if (err < 0)
goto out;
ceph: fix indentation in __get_snap_name() Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-29 02:33:08 -07:00
rinfo = &req->r_reply_info;
for (i = 0; i < rinfo->dir_nr; i++) {
rde = rinfo->dir_entries + i;
BUG_ON(!rde->inode.in);
if (ceph_snap(inode) ==
le64_to_cpu(rde->inode.in->snapid)) {
memcpy(name, rde->name, rde->name_len);
name[rde->name_len] = '\0';
err = 0;
goto out;
}
}
if (rinfo->dir_end)
break;
BUG_ON(rinfo->dir_nr <= 0);
rde = rinfo->dir_entries + (rinfo->dir_nr - 1);
next_offset += rinfo->dir_nr;
last_name = kstrndup(rde->name, rde->name_len, GFP_KERNEL);
if (!last_name) {
err = -ENOMEM;
goto out;
}
ceph_mdsc_put_request(req);
req = NULL;
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
}
err = -ENOENT;
out:
if (req)
ceph_mdsc_put_request(req);
kfree(last_name);
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(fsc->client, "child dentry %p %p %llx.%llx err=%d\n", child,
inode, ceph_vinop(inode), err);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
return err;
}
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
static int ceph_get_name(struct dentry *parent, char *name,
struct dentry *child)
{
struct ceph_mds_client *mdsc;
struct ceph_mds_request *req;
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
struct inode *dir = d_inode(parent);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
struct inode *inode = d_inode(child);
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
struct ceph_mds_reply_info_parsed *rinfo;
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
int err;
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
if (ceph_snap(inode) != CEPH_NOSNAP)
return __get_snap_name(parent, name, child);
ceph: rename _to_client() to _to_fs_client() We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 19:50:38 -07:00
mdsc = ceph_inode_to_fs_client(inode)->mdsc;
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPNAME,
USE_ANY_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
inode_lock(dir);
ceph: snapshot nfs re-export To support snapshot nfs re-export, we need a way to lookup snapped inode by file handle. For directory inode, snapped metadata are always stored together with head inode. Client just need to pass vinodeno_t to MDS. For non-directory inode, there can be multiple version of snapped inodes and they can be stored in different dirfrags. Besides vinodeno_t, client also need to tell mds from which dirfrag it got the snapped inode. Another problem of supporting snapshot nfs re-export is that there can be multiple paths to access a snapped inode. For example: mkdir -p d1/d2/d3 mkdir d1/.snap/s1 Paths 'd1/.snap/s1/d2/d3', 'd1/d2/.snap/_s1_<inode number of d1>/d3' and 'd1/d2/d3/.snap/_s1_<inode number of d1>' are all reference to the same snapped inode. For a given snapped inode, There is no convenient way to get the first form and the second form paths. For simplicity, ceph_get_parent() return snapdir for snapped directory inode. Furthermore, client may access snapshot of deleted directory. For example: mkdir -p d1/d2 mkdir d1/.snap/s1 open d1/.snap/s1/d2 rm -rf d1/d2 <nfs server restart> The path constucted by ceph_get_parent() and ceph_get_name() is '<inode of d2>/.snap/_s1_<inode number of d1>'. Futher lookup parent of <inode of d2> will fail. To workaround this case, this patch uses d_obtain_root() to get dentry for snapdir of deleted directory. snapdir dentry has no DCACHE_DISCONNECTED flag set, reconnect_path() stops when it reaches snapdir dentry. Link: http://tracker.ceph.com/issues/22105 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15 02:39:40 -07:00
req->r_inode = inode;
ihold(inode);
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-17 15:25:59 -07:00
req->r_ino2 = ceph_vino(d_inode(parent));
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
req->r_parent = dir;
ihold(dir);
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 08:28:26 -07:00
set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
req->r_num_caps = 2;
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
inode_unlock(dir);
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
if (err)
goto out;
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
rinfo = &req->r_reply_info;
if (!IS_ENCRYPTED(dir)) {
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
memcpy(name, rinfo->dname, rinfo->dname_len);
name[rinfo->dname_len] = 0;
} else {
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
struct fscrypt_str oname = FSTR_INIT(NULL, 0);
struct ceph_fname fname = { .dir = dir,
.name = rinfo->dname,
.ctext = rinfo->altname,
.name_len = rinfo->dname_len,
.ctext_len = rinfo->altname_len };
err = ceph_fname_alloc_buffer(dir, &oname);
if (err < 0)
goto out;
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
ceph: make ceph_fill_trace and ceph_get_name decrypt names When we get a dentry in a trace, decrypt the name so we can properly instantiate the dentry or fill out ceph_get_name() buffer. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-10 12:13:29 -07:00
err = ceph_fname_to_usr(&fname, NULL, &oname, NULL);
if (!err) {
memcpy(name, oname.name, oname.len);
name[oname.len] = 0;
}
ceph_fname_free_buffer(dir, &oname);
}
out:
ceph: print cluster fsid and client global_id in all debug logs Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-11 18:04:07 -07:00
doutc(mdsc->fsc->client, "child dentry %p %p %llx.%llx err %d %s%s\n",
child, inode, ceph_vinop(inode), err, err ? "" : "name ",
err ? "" : name);
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
ceph_mdsc_put_request(req);
return err;
}
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
const struct export_operations ceph_export_ops = {
.encode_fh = ceph_encode_fh,
.fh_to_dentry = ceph_fh_to_dentry,
.fh_to_parent = ceph_fh_to_parent,
ceph: add get_parent() NFS export callback The callback uses LOOKUPPARENT MDS request to find parent. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-01 07:11:45 -07:00
.get_parent = ceph_get_parent,
ceph: add get_name() NFS export callback Use the newly introduced LOOKUPNAME MDS request to connect child inode to its parent directory. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-06 01:40:32 -07:00
.get_name = ceph_get_name,
ceph: nfs re-export support Basic NFS re-export support is included. This mostly works. However, Ceph's MDS design precludes the ability to generate a (small) filehandle that will be valid forever, so this is of limited utility. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
};
Copy Permalink