kevin/linux
1
Fork 0
Code
8780dad9e9
linux/net/mac80211/led.h

74 lines
2.1 KiB
C
Raw Normal View History

[MAC80211]: Add mac80211 wireless stack. Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05 11:45:53 -07:00
/*
* Copyright 2006, Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/leds.h>
#include "ieee80211_i.h"
#ifdef CONFIG_MAC80211_LEDS
mac80211: add throughput based LED blink trigger iwlwifi and other drivers like to blink their LED based on throughput. Implement this generically in mac80211, based on a throughput table the driver specifies. That way, drivers can set the blink frequencies depending on their desired behaviour and max throughput. All the drivers need to do is provide an LED class device, best with blink hardware offload. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 00:58:45 -07:00
void ieee80211_led_rx(struct ieee80211_local *local);
void ieee80211_led_tx(struct ieee80211_local *local, int q);
void ieee80211_led_assoc(struct ieee80211_local *local,
bool associated);
void ieee80211_led_radio(struct ieee80211_local *local,
bool enabled);
void ieee80211_led_names(struct ieee80211_local *local);
void ieee80211_led_init(struct ieee80211_local *local);
void ieee80211_led_exit(struct ieee80211_local *local);
mac80211: selective throughput LED trigger active The throughput LED trigger was always active when the radio was enabled. In most cases that's likely the desired behaviour, but iwlwifi requires it to be only active when one of the virtual interfaces is actually "connected" in some way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 00:59:23 -07:00
void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local,
unsigned int types_on, unsigned int types_off);
[MAC80211]: Add mac80211 wireless stack. Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05 11:45:53 -07:00
#else
static inline void ieee80211_led_rx(struct ieee80211_local *local)
{
}
static inline void ieee80211_led_tx(struct ieee80211_local *local, int q)
{
}
[MAC80211]: Add association LED trigger Many devices have LEDs to indicate the link status. Export this functionality to drivers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27 06:10:44 -07:00
static inline void ieee80211_led_assoc(struct ieee80211_local *local,
bool associated)
{
}
mac80211: Add radio led trigger Some devices have a seperate LED which indicates if the radio is enabled or not. This adds a LED trigger to mac80211 where drivers can hook into when they are interested in radio status changes. v2: Check hw.conf.radio_enabled when calling start(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-07 11:45:24 -07:00
static inline void ieee80211_led_radio(struct ieee80211_local *local,
bool enabled)
{
}
mac80211: make LED trigger names available early The throughput trigger will require doing LED classdev/trigger handling before register_hw(), so drivers should have access to the trigger names before it. If trigger registration fails, this will still make the trigger name available, but that's not a big problem since the default trigger will the simply not be found. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-27 12:02:59 -07:00
static inline void ieee80211_led_names(struct ieee80211_local *local)
{
}
[MAC80211]: Add mac80211 wireless stack. Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05 11:45:53 -07:00
static inline void ieee80211_led_init(struct ieee80211_local *local)
{
}
static inline void ieee80211_led_exit(struct ieee80211_local *local)
{
}
mac80211: selective throughput LED trigger active The throughput LED trigger was always active when the radio was enabled. In most cases that's likely the desired behaviour, but iwlwifi requires it to be only active when one of the virtual interfaces is actually "connected" in some way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 00:59:23 -07:00
static inline void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local,
unsigned int types_on,
unsigned int types_off)
mac80211: add throughput based LED blink trigger iwlwifi and other drivers like to blink their LED based on throughput. Implement this generically in mac80211, based on a throughput table the driver specifies. That way, drivers can set the blink frequencies depending on their desired behaviour and max throughput. All the drivers need to do is provide an LED class device, best with blink hardware offload. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 00:58:45 -07:00
{
}
#endif
static inline void
ieee80211_tpt_led_trig_tx(struct ieee80211_local *local, __le16 fc, int bytes)
{
#ifdef CONFIG_MAC80211_LEDS
if (local->tpt_led_trigger && ieee80211_is_data(fc))
local->tpt_led_trigger->tx_bytes += bytes;
[MAC80211]: Add mac80211 wireless stack. Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05 11:45:53 -07:00
#endif
mac80211: add throughput based LED blink trigger iwlwifi and other drivers like to blink their LED based on throughput. Implement this generically in mac80211, based on a throughput table the driver specifies. That way, drivers can set the blink frequencies depending on their desired behaviour and max throughput. All the drivers need to do is provide an LED class device, best with blink hardware offload. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 00:58:45 -07:00
}
static inline void
ieee80211_tpt_led_trig_rx(struct ieee80211_local *local, __le16 fc, int bytes)
{
#ifdef CONFIG_MAC80211_LEDS
if (local->tpt_led_trigger && ieee80211_is_data(fc))
local->tpt_led_trigger->rx_bytes += bytes;
#endif
}
Copy Permalink