[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
#ifndef __KVM_H
|
|
|
|
#define __KVM_H
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
|
|
|
* the COPYING file in the top-level directory.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
|
|
|
#include "vmx.h"
|
|
|
|
#include <linux/kvm.h>
|
|
|
|
|
|
|
|
#define CR0_PE_MASK (1ULL << 0)
|
|
|
|
#define CR0_TS_MASK (1ULL << 3)
|
|
|
|
#define CR0_NE_MASK (1ULL << 5)
|
|
|
|
#define CR0_WP_MASK (1ULL << 16)
|
|
|
|
#define CR0_NW_MASK (1ULL << 29)
|
|
|
|
#define CR0_CD_MASK (1ULL << 30)
|
|
|
|
#define CR0_PG_MASK (1ULL << 31)
|
|
|
|
|
|
|
|
#define CR3_WPT_MASK (1ULL << 3)
|
|
|
|
#define CR3_PCD_MASK (1ULL << 4)
|
|
|
|
|
|
|
|
#define CR3_RESEVED_BITS 0x07ULL
|
|
|
|
#define CR3_L_MODE_RESEVED_BITS (~((1ULL << 40) - 1) | 0x0fe7ULL)
|
|
|
|
#define CR3_FLAGS_MASK ((1ULL << 5) - 1)
|
|
|
|
|
|
|
|
#define CR4_VME_MASK (1ULL << 0)
|
|
|
|
#define CR4_PSE_MASK (1ULL << 4)
|
|
|
|
#define CR4_PAE_MASK (1ULL << 5)
|
|
|
|
#define CR4_PGE_MASK (1ULL << 7)
|
|
|
|
#define CR4_VMXE_MASK (1ULL << 13)
|
|
|
|
|
|
|
|
#define KVM_GUEST_CR0_MASK \
|
|
|
|
(CR0_PG_MASK | CR0_PE_MASK | CR0_WP_MASK | CR0_NE_MASK \
|
|
|
|
| CR0_NW_MASK | CR0_CD_MASK)
|
|
|
|
#define KVM_VM_CR0_ALWAYS_ON \
|
|
|
|
(CR0_PG_MASK | CR0_PE_MASK | CR0_WP_MASK | CR0_NE_MASK)
|
|
|
|
#define KVM_GUEST_CR4_MASK \
|
|
|
|
(CR4_PSE_MASK | CR4_PAE_MASK | CR4_PGE_MASK | CR4_VMXE_MASK | CR4_VME_MASK)
|
|
|
|
#define KVM_PMODE_VM_CR4_ALWAYS_ON (CR4_VMXE_MASK | CR4_PAE_MASK)
|
|
|
|
#define KVM_RMODE_VM_CR4_ALWAYS_ON (CR4_VMXE_MASK | CR4_PAE_MASK | CR4_VME_MASK)
|
|
|
|
|
|
|
|
#define INVALID_PAGE (~(hpa_t)0)
|
|
|
|
#define UNMAPPED_GVA (~(gpa_t)0)
|
|
|
|
|
|
|
|
#define KVM_MAX_VCPUS 1
|
|
|
|
#define KVM_MEMORY_SLOTS 4
|
|
|
|
#define KVM_NUM_MMU_PAGES 256
|
2007-01-05 17:36:47 -07:00
|
|
|
#define KVM_MIN_FREE_MMU_PAGES 5
|
|
|
|
#define KVM_REFILL_PAGES 25
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
|
|
|
|
#define FX_IMAGE_SIZE 512
|
|
|
|
#define FX_IMAGE_ALIGN 16
|
|
|
|
#define FX_BUF_SIZE (2 * FX_IMAGE_SIZE + FX_IMAGE_ALIGN)
|
|
|
|
|
|
|
|
#define DE_VECTOR 0
|
|
|
|
#define DF_VECTOR 8
|
|
|
|
#define TS_VECTOR 10
|
|
|
|
#define NP_VECTOR 11
|
|
|
|
#define SS_VECTOR 12
|
|
|
|
#define GP_VECTOR 13
|
|
|
|
#define PF_VECTOR 14
|
|
|
|
|
|
|
|
#define SELECTOR_TI_MASK (1 << 2)
|
|
|
|
#define SELECTOR_RPL_MASK 0x03
|
|
|
|
|
|
|
|
#define IOPL_SHIFT 12
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Address types:
|
|
|
|
*
|
|
|
|
* gva - guest virtual address
|
|
|
|
* gpa - guest physical address
|
|
|
|
* gfn - guest frame number
|
|
|
|
* hva - host virtual address
|
|
|
|
* hpa - host physical address
|
|
|
|
* hfn - host frame number
|
|
|
|
*/
|
|
|
|
|
|
|
|
typedef unsigned long gva_t;
|
|
|
|
typedef u64 gpa_t;
|
|
|
|
typedef unsigned long gfn_t;
|
|
|
|
|
|
|
|
typedef unsigned long hva_t;
|
|
|
|
typedef u64 hpa_t;
|
|
|
|
typedef unsigned long hfn_t;
|
|
|
|
|
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 17:36:43 -07:00
|
|
|
#define NR_PTE_CHAIN_ENTRIES 5
|
|
|
|
|
|
|
|
struct kvm_pte_chain {
|
|
|
|
u64 *parent_ptes[NR_PTE_CHAIN_ENTRIES];
|
|
|
|
struct hlist_node link;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* kvm_mmu_page_role, below, is defined as:
|
|
|
|
*
|
|
|
|
* bits 0:3 - total guest paging levels (2-4, or zero for real mode)
|
|
|
|
* bits 4:7 - page table level for this shadow (1-4)
|
|
|
|
* bits 8:9 - page table quadrant for 2-level guests
|
|
|
|
* bit 16 - "metaphysical" - gfn is not a real page (huge page/real mode)
|
|
|
|
*/
|
|
|
|
union kvm_mmu_page_role {
|
|
|
|
unsigned word;
|
|
|
|
struct {
|
|
|
|
unsigned glevels : 4;
|
|
|
|
unsigned level : 4;
|
|
|
|
unsigned quadrant : 2;
|
|
|
|
unsigned pad_for_nice_hex_output : 6;
|
|
|
|
unsigned metaphysical : 1;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
struct kvm_mmu_page {
|
|
|
|
struct list_head link;
|
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 17:36:43 -07:00
|
|
|
struct hlist_node hash_link;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The following two entries are used to key the shadow page in the
|
|
|
|
* hash table.
|
|
|
|
*/
|
|
|
|
gfn_t gfn;
|
|
|
|
union kvm_mmu_page_role role;
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
hpa_t page_hpa;
|
|
|
|
unsigned long slot_bitmap; /* One bit set per slot which has memory
|
|
|
|
* in this shadow page.
|
|
|
|
*/
|
|
|
|
int global; /* Set if all ptes in this page are global */
|
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 17:36:43 -07:00
|
|
|
int multimapped; /* More than one parent_pte? */
|
|
|
|
union {
|
|
|
|
u64 *parent_pte; /* !multimapped */
|
|
|
|
struct hlist_head parent_ptes; /* multimapped, kvm_pte_chain */
|
|
|
|
};
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct vmcs {
|
|
|
|
u32 revision_id;
|
|
|
|
u32 abort;
|
|
|
|
char data[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
#define vmx_msr_entry kvm_msr_entry
|
|
|
|
|
|
|
|
struct kvm_vcpu;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
|
|
|
|
* 32-bit). The kvm_mmu structure abstracts the details of the current mmu
|
|
|
|
* mode.
|
|
|
|
*/
|
|
|
|
struct kvm_mmu {
|
|
|
|
void (*new_cr3)(struct kvm_vcpu *vcpu);
|
|
|
|
int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
|
|
|
|
void (*free)(struct kvm_vcpu *vcpu);
|
|
|
|
gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
|
|
|
|
hpa_t root_hpa;
|
|
|
|
int root_level;
|
|
|
|
int shadow_root_level;
|
2007-01-05 17:36:40 -07:00
|
|
|
|
|
|
|
u64 *pae_root;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct kvm_guest_debug {
|
|
|
|
int enabled;
|
|
|
|
unsigned long bp[4];
|
|
|
|
int singlestep;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
VCPU_REGS_RAX = 0,
|
|
|
|
VCPU_REGS_RCX = 1,
|
|
|
|
VCPU_REGS_RDX = 2,
|
|
|
|
VCPU_REGS_RBX = 3,
|
|
|
|
VCPU_REGS_RSP = 4,
|
|
|
|
VCPU_REGS_RBP = 5,
|
|
|
|
VCPU_REGS_RSI = 6,
|
|
|
|
VCPU_REGS_RDI = 7,
|
2006-12-13 01:33:45 -07:00
|
|
|
#ifdef CONFIG_X86_64
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
VCPU_REGS_R8 = 8,
|
|
|
|
VCPU_REGS_R9 = 9,
|
|
|
|
VCPU_REGS_R10 = 10,
|
|
|
|
VCPU_REGS_R11 = 11,
|
|
|
|
VCPU_REGS_R12 = 12,
|
|
|
|
VCPU_REGS_R13 = 13,
|
|
|
|
VCPU_REGS_R14 = 14,
|
|
|
|
VCPU_REGS_R15 = 15,
|
|
|
|
#endif
|
|
|
|
NR_VCPU_REGS
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
VCPU_SREG_CS,
|
|
|
|
VCPU_SREG_DS,
|
|
|
|
VCPU_SREG_ES,
|
|
|
|
VCPU_SREG_FS,
|
|
|
|
VCPU_SREG_GS,
|
|
|
|
VCPU_SREG_SS,
|
|
|
|
VCPU_SREG_TR,
|
|
|
|
VCPU_SREG_LDTR,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct kvm_vcpu {
|
|
|
|
struct kvm *kvm;
|
|
|
|
union {
|
|
|
|
struct vmcs *vmcs;
|
|
|
|
struct vcpu_svm *svm;
|
|
|
|
};
|
|
|
|
struct mutex mutex;
|
|
|
|
int cpu;
|
|
|
|
int launched;
|
2007-01-05 17:36:24 -07:00
|
|
|
int interrupt_window_open;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
|
|
|
|
#define NR_IRQ_WORDS KVM_IRQ_BITMAP_SIZE(unsigned long)
|
|
|
|
unsigned long irq_pending[NR_IRQ_WORDS];
|
|
|
|
unsigned long regs[NR_VCPU_REGS]; /* for rsp: vcpu_load_rsp_rip() */
|
|
|
|
unsigned long rip; /* needs vcpu_load_rsp_rip() */
|
|
|
|
|
|
|
|
unsigned long cr0;
|
|
|
|
unsigned long cr2;
|
|
|
|
unsigned long cr3;
|
|
|
|
unsigned long cr4;
|
|
|
|
unsigned long cr8;
|
2007-01-05 17:36:39 -07:00
|
|
|
u64 pdptrs[4]; /* pae */
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
u64 shadow_efer;
|
|
|
|
u64 apic_base;
|
|
|
|
int nmsrs;
|
|
|
|
struct vmx_msr_entry *guest_msrs;
|
|
|
|
struct vmx_msr_entry *host_msrs;
|
|
|
|
|
|
|
|
struct list_head free_pages;
|
|
|
|
struct kvm_mmu_page page_header_buf[KVM_NUM_MMU_PAGES];
|
|
|
|
struct kvm_mmu mmu;
|
|
|
|
|
2007-01-05 17:36:50 -07:00
|
|
|
gfn_t last_pt_write_gfn;
|
|
|
|
int last_pt_write_count;
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
struct kvm_guest_debug guest_debug;
|
|
|
|
|
|
|
|
char fx_buf[FX_BUF_SIZE];
|
|
|
|
char *host_fx_image;
|
|
|
|
char *guest_fx_image;
|
|
|
|
|
|
|
|
int mmio_needed;
|
|
|
|
int mmio_read_completed;
|
|
|
|
int mmio_is_write;
|
|
|
|
int mmio_size;
|
|
|
|
unsigned char mmio_data[8];
|
|
|
|
gpa_t mmio_phys_addr;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
int active;
|
|
|
|
u8 save_iopl;
|
|
|
|
struct kvm_save_segment {
|
|
|
|
u16 selector;
|
|
|
|
unsigned long base;
|
|
|
|
u32 limit;
|
|
|
|
u32 ar;
|
|
|
|
} tr, es, ds, fs, gs;
|
|
|
|
} rmode;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct kvm_memory_slot {
|
|
|
|
gfn_t base_gfn;
|
|
|
|
unsigned long npages;
|
|
|
|
unsigned long flags;
|
|
|
|
struct page **phys_mem;
|
|
|
|
unsigned long *dirty_bitmap;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct kvm {
|
|
|
|
spinlock_t lock; /* protects everything except vcpus */
|
|
|
|
int nmemslots;
|
|
|
|
struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS];
|
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 17:36:43 -07:00
|
|
|
/*
|
|
|
|
* Hash table of struct kvm_mmu_page.
|
|
|
|
*/
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
struct list_head active_mmu_pages;
|
2007-01-05 17:36:47 -07:00
|
|
|
int n_free_mmu_pages;
|
[PATCH] KVM: MMU: Shadow page table caching
Define a hashtable for caching shadow page tables. Look up the cache on
context switch (cr3 change) or during page faults.
The key to the cache is a combination of
- the guest page table frame number
- the number of paging levels in the guest
* we can cache real mode, 32-bit mode, pae, and long mode page
tables simultaneously. this is useful for smp bootup.
- the guest page table table
* some kernels use a page as both a page table and a page directory. this
allows multiple shadow pages to exist for that page, one per level
- the "quadrant"
* 32-bit mode page tables span 4MB, whereas a shadow page table spans
2MB. similarly, a 32-bit page directory spans 4GB, while a shadow
page directory spans 1GB. the quadrant allows caching up to 4 shadow page
tables for one guest page in one level.
- a "metaphysical" bit
* for real mode, and for pse pages, there is no guest page table, so set
the bit to avoid write protecting the page.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 17:36:43 -07:00
|
|
|
struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
struct kvm_vcpu vcpus[KVM_MAX_VCPUS];
|
|
|
|
int memory_config_version;
|
|
|
|
int busy;
|
2007-01-05 17:36:38 -07:00
|
|
|
unsigned long rmap_overflow;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct kvm_stat {
|
|
|
|
u32 pf_fixed;
|
|
|
|
u32 pf_guest;
|
|
|
|
u32 tlb_flush;
|
|
|
|
u32 invlpg;
|
|
|
|
|
|
|
|
u32 exits;
|
|
|
|
u32 io_exits;
|
|
|
|
u32 mmio_exits;
|
|
|
|
u32 signal_exits;
|
2007-01-05 17:36:24 -07:00
|
|
|
u32 irq_window_exits;
|
|
|
|
u32 halt_exits;
|
|
|
|
u32 request_irq_exits;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
u32 irq_exits;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct descriptor_table {
|
|
|
|
u16 limit;
|
|
|
|
unsigned long base;
|
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct kvm_arch_ops {
|
|
|
|
int (*cpu_has_kvm_support)(void); /* __init */
|
|
|
|
int (*disabled_by_bios)(void); /* __init */
|
|
|
|
void (*hardware_enable)(void *dummy); /* __init */
|
|
|
|
void (*hardware_disable)(void *dummy);
|
|
|
|
int (*hardware_setup)(void); /* __init */
|
|
|
|
void (*hardware_unsetup)(void); /* __exit */
|
|
|
|
|
|
|
|
int (*vcpu_create)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*vcpu_free)(struct kvm_vcpu *vcpu);
|
|
|
|
|
|
|
|
struct kvm_vcpu *(*vcpu_load)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*vcpu_put)(struct kvm_vcpu *vcpu);
|
|
|
|
|
|
|
|
int (*set_guest_debug)(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_debug_guest *dbg);
|
|
|
|
int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
|
|
|
|
int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
|
|
|
|
u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
|
|
|
|
void (*get_segment)(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_segment *var, int seg);
|
|
|
|
void (*set_segment)(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_segment *var, int seg);
|
|
|
|
void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
|
2007-01-05 17:36:38 -07:00
|
|
|
void (*decache_cr0_cr4_guest_bits)(struct kvm_vcpu *vcpu);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
|
|
|
|
void (*set_cr0_no_modeswitch)(struct kvm_vcpu *vcpu,
|
|
|
|
unsigned long cr0);
|
|
|
|
void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
|
|
|
|
void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
|
|
|
|
void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
|
|
|
|
void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
|
|
|
|
void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
|
|
|
|
void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
|
|
|
|
void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
|
|
|
|
unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
|
|
|
|
void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
|
|
|
|
int *exception);
|
|
|
|
void (*cache_regs)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*decache_regs)(struct kvm_vcpu *vcpu);
|
|
|
|
unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
|
|
|
|
|
|
|
|
void (*invlpg)(struct kvm_vcpu *vcpu, gva_t addr);
|
|
|
|
void (*tlb_flush)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*inject_page_fault)(struct kvm_vcpu *vcpu,
|
|
|
|
unsigned long addr, u32 err_code);
|
|
|
|
|
|
|
|
void (*inject_gp)(struct kvm_vcpu *vcpu, unsigned err_code);
|
|
|
|
|
|
|
|
int (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
|
|
|
|
int (*vcpu_setup)(struct kvm_vcpu *vcpu);
|
|
|
|
void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
|
|
|
|
};
|
|
|
|
|
|
|
|
extern struct kvm_stat kvm_stat;
|
|
|
|
extern struct kvm_arch_ops *kvm_arch_ops;
|
|
|
|
|
|
|
|
#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
|
|
|
|
#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
|
|
|
|
|
|
|
|
int kvm_init_arch(struct kvm_arch_ops *ops, struct module *module);
|
|
|
|
void kvm_exit_arch(void);
|
|
|
|
|
|
|
|
void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
|
2006-12-29 17:50:01 -07:00
|
|
|
int kvm_mmu_create(struct kvm_vcpu *vcpu);
|
|
|
|
int kvm_mmu_setup(struct kvm_vcpu *vcpu);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
|
|
|
|
int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
|
|
|
|
void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
|
|
|
|
|
|
|
|
hpa_t gpa_to_hpa(struct kvm_vcpu *vcpu, gpa_t gpa);
|
|
|
|
#define HPA_MSB ((sizeof(hpa_t) * 8) - 1)
|
|
|
|
#define HPA_ERR_MASK ((hpa_t)1 << HPA_MSB)
|
|
|
|
static inline int is_error_hpa(hpa_t hpa) { return hpa >> HPA_MSB; }
|
|
|
|
hpa_t gva_to_hpa(struct kvm_vcpu *vcpu, gva_t gva);
|
|
|
|
|
|
|
|
void kvm_emulator_want_group7_invlpg(void);
|
|
|
|
|
|
|
|
extern hpa_t bad_page_address;
|
|
|
|
|
|
|
|
static inline struct page *gfn_to_page(struct kvm_memory_slot *slot, gfn_t gfn)
|
|
|
|
{
|
|
|
|
return slot->phys_mem[gfn - slot->base_gfn];
|
|
|
|
}
|
|
|
|
|
|
|
|
struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
|
|
|
|
void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
|
|
|
|
|
|
|
|
enum emulation_result {
|
|
|
|
EMULATE_DONE, /* no further processing */
|
|
|
|
EMULATE_DO_MMIO, /* kvm_run filled with mmio request */
|
|
|
|
EMULATE_FAIL, /* can't emulate this instruction */
|
|
|
|
};
|
|
|
|
|
|
|
|
int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
|
|
|
|
unsigned long cr2, u16 error_code);
|
|
|
|
void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
|
|
|
|
void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
|
|
|
|
void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
|
|
|
|
unsigned long *rflags);
|
|
|
|
|
|
|
|
unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
|
|
|
|
void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
|
|
|
|
unsigned long *rflags);
|
|
|
|
|
|
|
|
struct x86_emulate_ctxt;
|
|
|
|
|
|
|
|
int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
|
|
|
|
int emulate_clts(struct kvm_vcpu *vcpu);
|
|
|
|
int emulator_get_dr(struct x86_emulate_ctxt* ctxt, int dr,
|
|
|
|
unsigned long *dest);
|
|
|
|
int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
|
|
|
|
unsigned long value);
|
|
|
|
|
|
|
|
void set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
|
|
|
|
void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr0);
|
|
|
|
void set_cr4(struct kvm_vcpu *vcpu, unsigned long cr0);
|
|
|
|
void set_cr8(struct kvm_vcpu *vcpu, unsigned long cr0);
|
|
|
|
void lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
|
|
|
|
|
2006-12-29 17:49:48 -07:00
|
|
|
int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
|
|
|
|
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
|
|
|
|
void fx_init(struct kvm_vcpu *vcpu);
|
|
|
|
|
|
|
|
void load_msrs(struct vmx_msr_entry *e, int n);
|
|
|
|
void save_msrs(struct vmx_msr_entry *e, int n);
|
|
|
|
void kvm_resched(struct kvm_vcpu *vcpu);
|
|
|
|
|
|
|
|
int kvm_read_guest(struct kvm_vcpu *vcpu,
|
|
|
|
gva_t addr,
|
|
|
|
unsigned long size,
|
|
|
|
void *dest);
|
|
|
|
|
|
|
|
int kvm_write_guest(struct kvm_vcpu *vcpu,
|
|
|
|
gva_t addr,
|
|
|
|
unsigned long size,
|
|
|
|
void *data);
|
|
|
|
|
|
|
|
unsigned long segment_base(u16 selector);
|
|
|
|
|
2007-01-05 17:36:44 -07:00
|
|
|
void kvm_mmu_pre_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes);
|
|
|
|
void kvm_mmu_post_write(struct kvm_vcpu *vcpu, gpa_t gpa, int bytes);
|
2007-01-05 17:36:45 -07:00
|
|
|
int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
|
2007-01-05 17:36:47 -07:00
|
|
|
void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
|
|
|
|
|
|
|
|
static inline int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
|
|
|
|
u32 error_code)
|
|
|
|
{
|
|
|
|
if (unlikely(vcpu->kvm->n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
|
|
|
|
kvm_mmu_free_some_pages(vcpu);
|
|
|
|
return vcpu->mmu.page_fault(vcpu, gva, error_code);
|
|
|
|
}
|
2007-01-05 17:36:44 -07:00
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
static inline struct page *_gfn_to_page(struct kvm *kvm, gfn_t gfn)
|
|
|
|
{
|
|
|
|
struct kvm_memory_slot *slot = gfn_to_memslot(kvm, gfn);
|
|
|
|
return (slot) ? slot->phys_mem[gfn - slot->base_gfn] : NULL;
|
|
|
|
}
|
|
|
|
|
2006-12-29 17:49:37 -07:00
|
|
|
static inline int is_long_mode(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
return vcpu->shadow_efer & EFER_LME;
|
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
static inline int is_pae(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return vcpu->cr4 & CR4_PAE_MASK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int is_pse(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return vcpu->cr4 & CR4_PSE_MASK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int is_paging(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return vcpu->cr0 & CR0_PG_MASK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int memslot_id(struct kvm *kvm, struct kvm_memory_slot *slot)
|
|
|
|
{
|
|
|
|
return slot - kvm->memslots;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
|
|
|
|
{
|
|
|
|
struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
|
|
|
|
|
|
|
|
return (struct kvm_mmu_page *)page->private;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16 read_fs(void)
|
|
|
|
{
|
|
|
|
u16 seg;
|
|
|
|
asm ("mov %%fs, %0" : "=g"(seg));
|
|
|
|
return seg;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16 read_gs(void)
|
|
|
|
{
|
|
|
|
u16 seg;
|
|
|
|
asm ("mov %%gs, %0" : "=g"(seg));
|
|
|
|
return seg;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u16 read_ldt(void)
|
|
|
|
{
|
|
|
|
u16 ldt;
|
|
|
|
asm ("sldt %0" : "=g"(ldt));
|
|
|
|
return ldt;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void load_fs(u16 sel)
|
|
|
|
{
|
|
|
|
asm ("mov %0, %%fs" : : "rm"(sel));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void load_gs(u16 sel)
|
|
|
|
{
|
|
|
|
asm ("mov %0, %%gs" : : "rm"(sel));
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef load_ldt
|
|
|
|
static inline void load_ldt(u16 sel)
|
|
|
|
{
|
|
|
|
asm ("lldt %0" : : "g"(sel));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static inline void get_idt(struct descriptor_table *table)
|
|
|
|
{
|
|
|
|
asm ("sidt %0" : "=m"(*table));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void get_gdt(struct descriptor_table *table)
|
|
|
|
{
|
|
|
|
asm ("sgdt %0" : "=m"(*table));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long read_tr_base(void)
|
|
|
|
{
|
|
|
|
u16 tr;
|
|
|
|
asm ("str %0" : "=g"(tr));
|
|
|
|
return segment_base(tr);
|
|
|
|
}
|
|
|
|
|
2006-12-13 01:33:45 -07:00
|
|
|
#ifdef CONFIG_X86_64
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 03:21:36 -07:00
|
|
|
static inline unsigned long read_msr(unsigned long msr)
|
|
|
|
{
|
|
|
|
u64 value;
|
|
|
|
|
|
|
|
rdmsrl(msr, value);
|
|
|
|
return value;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static inline void fx_save(void *image)
|
|
|
|
{
|
|
|
|
asm ("fxsave (%0)":: "r" (image));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void fx_restore(void *image)
|
|
|
|
{
|
|
|
|
asm ("fxrstor (%0)":: "r" (image));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void fpu_init(void)
|
|
|
|
{
|
|
|
|
asm ("finit");
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 get_rdx_init_val(void)
|
|
|
|
{
|
|
|
|
return 0x600; /* P6 family */
|
|
|
|
}
|
|
|
|
|
|
|
|
#define ASM_VMX_VMCLEAR_RAX ".byte 0x66, 0x0f, 0xc7, 0x30"
|
|
|
|
#define ASM_VMX_VMLAUNCH ".byte 0x0f, 0x01, 0xc2"
|
|
|
|
#define ASM_VMX_VMRESUME ".byte 0x0f, 0x01, 0xc3"
|
|
|
|
#define ASM_VMX_VMPTRLD_RAX ".byte 0x0f, 0xc7, 0x30"
|
|
|
|
#define ASM_VMX_VMREAD_RDX_RAX ".byte 0x0f, 0x78, 0xd0"
|
|
|
|
#define ASM_VMX_VMWRITE_RAX_RDX ".byte 0x0f, 0x79, 0xd0"
|
|
|
|
#define ASM_VMX_VMWRITE_RSP_RDX ".byte 0x0f, 0x79, 0xd4"
|
|
|
|
#define ASM_VMX_VMXOFF ".byte 0x0f, 0x01, 0xc4"
|
|
|
|
#define ASM_VMX_VMXON_RAX ".byte 0xf3, 0x0f, 0xc7, 0x30"
|
|
|
|
|
|
|
|
#define MSR_IA32_TIME_STAMP_COUNTER 0x010
|
|
|
|
|
|
|
|
#define TSS_IOPB_BASE_OFFSET 0x66
|
|
|
|
#define TSS_BASE_SIZE 0x68
|
|
|
|
#define TSS_IOPB_SIZE (65536 / 8)
|
|
|
|
#define TSS_REDIRECTION_SIZE (256 / 8)
|
|
|
|
#define RMODE_TSS_SIZE (TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
|
|
|
|
|
|
|
|
#endif
|