kevin/linux
1
Fork 0
Code
8117cc3a0c
linux/drivers/mfd/wm8350-regmap.c

340 lines
15 KiB
C
Raw Normal View History

mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
/*
* wm8350-regmap.c -- Wolfson Microelectronics WM8350 register map
*
* This file splits out the tables describing the defaults and access
* status of the WM8350 registers since they are rather large.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mfd/wm8350/core.h>
/*
* Access masks.
*/
mfd: Remove custom wm8350 cache implementation Since none of the users now reference the cache directly we can happily remove the custom cache code and rely on the regmap cache. For simplicity we don't bother with the register defaults tables but instead read the defaults from the device - regmap is capable of doing this, unlike our old cache infrastructure. This saves a lot of code and allows us to cache the device revision information too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-03 05:37:24 -07:00
static const struct wm8350_reg_access {
u16 readable; /* Mask of readable bits */
u16 writable; /* Mask of writable bits */
u16 vol; /* Mask of volatile bits */
} wm8350_reg_io_map[] = {
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
/* read write volatile */
mfd: Remove custom wm8350 cache implementation Since none of the users now reference the cache directly we can happily remove the custom cache code and rely on the regmap cache. For simplicity we don't bother with the register defaults tables but instead read the defaults from the device - regmap is capable of doing this, unlike our old cache infrastructure. This saves a lot of code and allows us to cache the device revision information too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-03 05:37:24 -07:00
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R0 - Reset/ID */
{ 0x7CFF, 0x0C00, 0x0000 }, /* R1 - ID */
mfd: Mark WM8350 mask revision as readable to match silicon No impact unless someone has written additional kernel code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-04-22 13:46:51 -07:00
{ 0x007F, 0x0000, 0x0000 }, /* R2 - ROM Mask ID */
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
mfd: Mark WM835x USB_SLV_500MA bit as accessible The code is out of sync with the silicon. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-04 13:10:58 -07:00
{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
{ 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
{ 0x0000, 0x0000, 0x0000 }, /* R7 */
{ 0xE537, 0xE537, 0xFFFF }, /* R8 - Power mgmt (1) */
{ 0x0FF3, 0x0FF3, 0xFFFF }, /* R9 - Power mgmt (2) */
{ 0x008F, 0x008F, 0xFFFF }, /* R10 - Power mgmt (3) */
{ 0x6D3C, 0x6D3C, 0xFFFF }, /* R11 - Power mgmt (4) */
{ 0x1F8F, 0x1F8F, 0xFFFF }, /* R12 - Power mgmt (5) */
{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R13 - Power mgmt (6) */
{ 0x0003, 0x0003, 0xFFFF }, /* R14 - Power mgmt (7) */
{ 0x0000, 0x0000, 0x0000 }, /* R15 */
{ 0x7F7F, 0x7F7F, 0xFFFF }, /* R16 - RTC Seconds/Minutes */
{ 0x073F, 0x073F, 0xFFFF }, /* R17 - RTC Hours/Day */
{ 0x1F3F, 0x1F3F, 0xFFFF }, /* R18 - RTC Date/Month */
{ 0x3FFF, 0x00FF, 0xFFFF }, /* R19 - RTC Year */
{ 0x7F7F, 0x7F7F, 0x0000 }, /* R20 - Alarm Seconds/Minutes */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R21 - Alarm Hours/Day */
{ 0x1F3F, 0x1F3F, 0x0000 }, /* R22 - Alarm Date/Month */
{ 0xEF7F, 0xEA7F, 0xFFFF }, /* R23 - RTC Time Control */
{ 0x3BFF, 0x0000, 0xFFFF }, /* R24 - System Interrupts */
{ 0xFEE7, 0x0000, 0xFFFF }, /* R25 - Interrupt Status 1 */
{ 0x35FF, 0x0000, 0xFFFF }, /* R26 - Interrupt Status 2 */
{ 0x0F3F, 0x0000, 0xFFFF }, /* R27 - Power Up Interrupt Status */
{ 0x0F3F, 0x0000, 0xFFFF }, /* R28 - Under Voltage Interrupt status */
{ 0x8000, 0x0000, 0xFFFF }, /* R29 - Over Current Interrupt status */
{ 0x1FFF, 0x0000, 0xFFFF }, /* R30 - GPIO Interrupt Status */
{ 0xEF7F, 0x0000, 0xFFFF }, /* R31 - Comparator Interrupt Status */
{ 0x3FFF, 0x3FFF, 0x0000 }, /* R32 - System Interrupts Mask */
{ 0xFEE7, 0xFEE7, 0x0000 }, /* R33 - Interrupt Status 1 Mask */
{ 0xF5FF, 0xF5FF, 0x0000 }, /* R34 - Interrupt Status 2 Mask */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R35 - Power Up Interrupt Status Mask */
{ 0x0F3F, 0x0F3F, 0x0000 }, /* R36 - Under Voltage Int status Mask */
{ 0x8000, 0x8000, 0x0000 }, /* R37 - Over Current Int status Mask */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R38 - GPIO Interrupt Status Mask */
{ 0xEF7F, 0xEF7F, 0x0000 }, /* R39 - Comparator IntStatus Mask */
{ 0xC9F7, 0xC9F7, 0xFFFF }, /* R40 - Clock Control 1 */
{ 0x8001, 0x8001, 0x0000 }, /* R41 - Clock Control 2 */
{ 0xFFF7, 0xFFF7, 0xFFFF }, /* R42 - FLL Control 1 */
{ 0xFBFF, 0xFBFF, 0x0000 }, /* R43 - FLL Control 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R44 - FLL Control 3 */
{ 0x0033, 0x0033, 0x0000 }, /* R45 - FLL Control 4 */
{ 0x0000, 0x0000, 0x0000 }, /* R46 */
{ 0x0000, 0x0000, 0x0000 }, /* R47 */
{ 0x3033, 0x3033, 0x0000 }, /* R48 - DAC Control */
{ 0x0000, 0x0000, 0x0000 }, /* R49 */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R50 - DAC Digital Volume L */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R51 - DAC Digital Volume R */
{ 0x0000, 0x0000, 0x0000 }, /* R52 */
{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R53 - DAC LR Rate */
{ 0x0017, 0x0017, 0x0000 }, /* R54 - DAC Clock Control */
{ 0x0000, 0x0000, 0x0000 }, /* R55 */
{ 0x0000, 0x0000, 0x0000 }, /* R56 */
{ 0x0000, 0x0000, 0x0000 }, /* R57 */
{ 0x4000, 0x4000, 0x0000 }, /* R58 - DAC Mute */
{ 0x7000, 0x7000, 0x0000 }, /* R59 - DAC Mute Volume */
{ 0x3C00, 0x3C00, 0x0000 }, /* R60 - DAC Side */
{ 0x0000, 0x0000, 0x0000 }, /* R61 */
{ 0x0000, 0x0000, 0x0000 }, /* R62 */
{ 0x0000, 0x0000, 0x0000 }, /* R63 */
{ 0x8303, 0x8303, 0xFFFF }, /* R64 - ADC Control */
{ 0x0000, 0x0000, 0x0000 }, /* R65 */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R66 - ADC Digital Volume L */
{ 0x81FF, 0x81FF, 0xFFFF }, /* R67 - ADC Digital Volume R */
{ 0x0FFF, 0x0FFF, 0x0000 }, /* R68 - ADC Divider */
{ 0x0000, 0x0000, 0x0000 }, /* R69 */
{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R70 - ADC LR Rate */
{ 0x0000, 0x0000, 0x0000 }, /* R71 */
{ 0x0707, 0x0707, 0xFFFF }, /* R72 - Input Control */
{ 0xC0C0, 0xC0C0, 0xFFFF }, /* R73 - IN3 Input Control */
{ 0xC09F, 0xC09F, 0xFFFF }, /* R74 - Mic Bias Control */
{ 0x0000, 0x0000, 0x0000 }, /* R75 */
{ 0x0F15, 0x0F15, 0xFFFF }, /* R76 - Output Control */
{ 0xC000, 0xC000, 0xFFFF }, /* R77 - Jack Detect */
{ 0x03FF, 0x03FF, 0x0000 }, /* R78 - Anti Pop Control */
{ 0x0000, 0x0000, 0x0000 }, /* R79 */
{ 0xE1FC, 0xE1FC, 0x8000 }, /* R80 - Left Input Volume */
{ 0xE1FC, 0xE1FC, 0x8000 }, /* R81 - Right Input Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R82 */
{ 0x0000, 0x0000, 0x0000 }, /* R83 */
{ 0x0000, 0x0000, 0x0000 }, /* R84 */
{ 0x0000, 0x0000, 0x0000 }, /* R85 */
{ 0x0000, 0x0000, 0x0000 }, /* R86 */
{ 0x0000, 0x0000, 0x0000 }, /* R87 */
{ 0x9807, 0x9807, 0xFFFF }, /* R88 - Left Mixer Control */
{ 0x980B, 0x980B, 0xFFFF }, /* R89 - Right Mixer Control */
{ 0x0000, 0x0000, 0x0000 }, /* R90 */
{ 0x0000, 0x0000, 0x0000 }, /* R91 */
{ 0x8909, 0x8909, 0xFFFF }, /* R92 - OUT3 Mixer Control */
{ 0x9E07, 0x9E07, 0xFFFF }, /* R93 - OUT4 Mixer Control */
{ 0x0000, 0x0000, 0x0000 }, /* R94 */
{ 0x0000, 0x0000, 0x0000 }, /* R95 */
{ 0x0EEE, 0x0EEE, 0x0000 }, /* R96 - Output Left Mixer Volume */
{ 0xE0EE, 0xE0EE, 0x0000 }, /* R97 - Output Right Mixer Volume */
{ 0x0E0F, 0x0E0F, 0x0000 }, /* R98 - Input Mixer Volume L */
{ 0xE0E1, 0xE0E1, 0x0000 }, /* R99 - Input Mixer Volume R */
{ 0x800E, 0x800E, 0x0000 }, /* R100 - Input Mixer Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R101 */
{ 0x0000, 0x0000, 0x0000 }, /* R102 */
{ 0x0000, 0x0000, 0x0000 }, /* R103 */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R104 - LOUT1 Volume */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R105 - ROUT1 Volume */
{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R106 - LOUT2 Volume */
{ 0xE7FC, 0xE7FC, 0xFFFF }, /* R107 - ROUT2 Volume */
{ 0x0000, 0x0000, 0x0000 }, /* R108 */
{ 0x0000, 0x0000, 0x0000 }, /* R109 */
{ 0x0000, 0x0000, 0x0000 }, /* R110 */
{ 0x80E0, 0x80E0, 0xFFFF }, /* R111 - BEEP Volume */
{ 0xBF00, 0xBF00, 0x0000 }, /* R112 - AI Formating */
{ 0x00F1, 0x00F1, 0x0000 }, /* R113 - ADC DAC COMP */
{ 0x00F8, 0x00F8, 0x0000 }, /* R114 - AI ADC Control */
{ 0x40FB, 0x40FB, 0x0000 }, /* R115 - AI DAC Control */
{ 0x7C30, 0x7C30, 0x0000 }, /* R116 - AIF Test */
{ 0x0000, 0x0000, 0x0000 }, /* R117 */
{ 0x0000, 0x0000, 0x0000 }, /* R118 */
{ 0x0000, 0x0000, 0x0000 }, /* R119 */
{ 0x0000, 0x0000, 0x0000 }, /* R120 */
{ 0x0000, 0x0000, 0x0000 }, /* R121 */
{ 0x0000, 0x0000, 0x0000 }, /* R122 */
{ 0x0000, 0x0000, 0x0000 }, /* R123 */
{ 0x0000, 0x0000, 0x0000 }, /* R124 */
{ 0x0000, 0x0000, 0x0000 }, /* R125 */
{ 0x0000, 0x0000, 0x0000 }, /* R126 */
{ 0x0000, 0x0000, 0x0000 }, /* R127 */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R128 - GPIO Debounce */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R129 - GPIO Pin pull up Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R130 - GPIO Pull down Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R131 - GPIO Interrupt Mode */
{ 0x0000, 0x0000, 0x0000 }, /* R132 */
{ 0x00C0, 0x00C0, 0x0000 }, /* R133 - GPIO Control */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R134 - GPIO Configuration (i/o) */
{ 0x1FFF, 0x1FFF, 0x0000 }, /* R135 - GPIO Pin Polarity / Type */
{ 0x0000, 0x0000, 0x0000 }, /* R136 */
{ 0x0000, 0x0000, 0x0000 }, /* R137 */
{ 0x0000, 0x0000, 0x0000 }, /* R138 */
{ 0x0000, 0x0000, 0x0000 }, /* R139 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R140 - GPIO Function Select 1 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R141 - GPIO Function Select 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R142 - GPIO Function Select 3 */
{ 0x000F, 0x000F, 0x0000 }, /* R143 - GPIO Function Select 4 */
{ 0xF0FF, 0xF0FF, 0xA000 }, /* R144 - Digitiser Control (1) */
{ 0x3707, 0x3707, 0x0000 }, /* R145 - Digitiser Control (2) */
{ 0x0000, 0x0000, 0x0000 }, /* R146 */
{ 0x0000, 0x0000, 0x0000 }, /* R147 */
{ 0x0000, 0x0000, 0x0000 }, /* R148 */
{ 0x0000, 0x0000, 0x0000 }, /* R149 */
{ 0x0000, 0x0000, 0x0000 }, /* R150 */
{ 0x0000, 0x0000, 0x0000 }, /* R151 */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R152 - AUX1 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R153 - AUX2 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R154 - AUX3 Readback */
{ 0x7FFF, 0x7000, 0xFFFF }, /* R155 - AUX4 Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R156 - USB Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R157 - LINE Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R158 - BATT Voltage Readback */
{ 0x0FFF, 0x0000, 0xFFFF }, /* R159 - Chip Temp Readback */
{ 0x0000, 0x0000, 0x0000 }, /* R160 */
{ 0x0000, 0x0000, 0x0000 }, /* R161 */
{ 0x0000, 0x0000, 0x0000 }, /* R162 */
{ 0x000F, 0x000F, 0x0000 }, /* R163 - Generic Comparator Control */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R164 - Generic comparator 1 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R165 - Generic comparator 2 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R166 - Generic comparator 3 */
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R167 - Generic comparator 4 */
{ 0xBFFF, 0xBFFF, 0x8000 }, /* R168 - Battery Charger Control 1 */
{ 0xFFFF, 0x4FFF, 0xB000 }, /* R169 - Battery Charger Control 2 */
{ 0x007F, 0x007F, 0x0000 }, /* R170 - Battery Charger Control 3 */
{ 0x0000, 0x0000, 0x0000 }, /* R171 */
{ 0x903F, 0x903F, 0xFFFF }, /* R172 - Current Sink Driver A */
{ 0xE333, 0xE333, 0xFFFF }, /* R173 - CSA Flash control */
{ 0x903F, 0x903F, 0xFFFF }, /* R174 - Current Sink Driver B */
{ 0xE333, 0xE333, 0xFFFF }, /* R175 - CSB Flash control */
{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R176 - DCDC/LDO requested */
{ 0x332D, 0x332D, 0x0000 }, /* R177 - DCDC Active options */
{ 0x002D, 0x002D, 0x0000 }, /* R178 - DCDC Sleep options */
{ 0x5177, 0x5177, 0x8000 }, /* R179 - Power-check comparator */
{ 0x047F, 0x047F, 0x0000 }, /* R180 - DCDC1 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R181 - DCDC1 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R182 - DCDC1 Low Power */
{ 0x535B, 0x535B, 0x0000 }, /* R183 - DCDC2 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R184 - DCDC2 Timeouts */
{ 0x0000, 0x0000, 0x0000 }, /* R185 */
{ 0x047F, 0x047F, 0x0000 }, /* R186 - DCDC3 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R187 - DCDC3 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R188 - DCDC3 Low Power */
{ 0x047F, 0x047F, 0x0000 }, /* R189 - DCDC4 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R190 - DCDC4 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R191 - DCDC4 Low Power */
{ 0x535B, 0x535B, 0x0000 }, /* R192 - DCDC5 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R193 - DCDC5 Timeouts */
{ 0x0000, 0x0000, 0x0000 }, /* R194 */
{ 0x047F, 0x047F, 0x0000 }, /* R195 - DCDC6 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R196 - DCDC6 Timeouts */
{ 0x737F, 0x737F, 0x0000 }, /* R197 - DCDC6 Low Power */
{ 0x0000, 0x0000, 0x0000 }, /* R198 */
{ 0xFFD3, 0xFFD3, 0x0000 }, /* R199 - Limit Switch Control */
{ 0x441F, 0x441F, 0x0000 }, /* R200 - LDO1 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R201 - LDO1 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R202 - LDO1 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R203 - LDO2 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R204 - LDO2 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R205 - LDO2 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R206 - LDO3 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R207 - LDO3 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R208 - LDO3 Low Power */
{ 0x441F, 0x441F, 0x0000 }, /* R209 - LDO4 Control */
{ 0xFFC0, 0xFFC0, 0x0000 }, /* R210 - LDO4 Timeouts */
{ 0x331F, 0x331F, 0x0000 }, /* R211 - LDO4 Low Power */
{ 0x0000, 0x0000, 0x0000 }, /* R212 */
{ 0x0000, 0x0000, 0x0000 }, /* R213 */
{ 0x0000, 0x0000, 0x0000 }, /* R214 */
{ 0x8F3F, 0x8F3F, 0x0000 }, /* R215 - VCC_FAULT Masks */
{ 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
{ 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
{ 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
mfd: Don't mark WM8350 security register as volatile There's no need to read this back from the chip each time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 10:25:27 -07:00
{ 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
{ 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
{ 0x0000, 0x0000, 0x0000 }, /* R221 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
{ 0x0000, 0x0000, 0x0000 }, /* R224 */
{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
power_supply: Add battery health reporting for WM8350 Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-30 14:45:14 -07:00
{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
mfd: Correct readability of WM8350 register 227 This includes the USB current limit status override which is used in the power management driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-04-13 06:05:02 -07:00
{ 0x34FE, 0x0000, 0xFFFF }, /* R227 */
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 07:58:10 -07:00
{ 0x0000, 0x0000, 0x0000 }, /* R228 */
{ 0x0000, 0x0000, 0x0000 }, /* R229 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R231 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R232 */
{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R233 */
{ 0x0000, 0x0000, 0x0000 }, /* R234 */
{ 0x0000, 0x0000, 0x0000 }, /* R235 */
{ 0x0000, 0x0000, 0x0000 }, /* R236 */
{ 0x0000, 0x0000, 0x0000 }, /* R237 */
{ 0x0000, 0x0000, 0x0000 }, /* R238 */
{ 0x0000, 0x0000, 0x0000 }, /* R239 */
{ 0x0000, 0x0000, 0x0000 }, /* R240 */
{ 0x0000, 0x0000, 0x0000 }, /* R241 */
{ 0x0000, 0x0000, 0x0000 }, /* R242 */
{ 0x0000, 0x0000, 0x0000 }, /* R243 */
{ 0x0000, 0x0000, 0x0000 }, /* R244 */
{ 0x0000, 0x0000, 0x0000 }, /* R245 */
{ 0x0000, 0x0000, 0x0000 }, /* R246 */
{ 0x0000, 0x0000, 0x0000 }, /* R247 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R248 */
{ 0x0000, 0x0000, 0x0000 }, /* R249 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R250 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R251 */
{ 0x0000, 0x0000, 0x0000 }, /* R252 */
{ 0xFFFF, 0x0010, 0xFFFF }, /* R253 */
{ 0x0000, 0x0000, 0x0000 }, /* R254 */
{ 0x0000, 0x0000, 0x0000 }, /* R255 */
};
mfd: Add regmap cache support for wm8350 Use the most simple possible transformation on the existing code so keep the table sitting around, further patches in this series will delete the existing cache code - the main purpose of this patch is to ensure that we always have a cache for bisection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-03 05:37:22 -07:00
static bool wm8350_readable(struct device *dev, unsigned int reg)
{
return wm8350_reg_io_map[reg].readable;
}
static bool wm8350_writeable(struct device *dev, unsigned int reg)
{
struct wm8350 *wm8350 = dev_get_drvdata(dev);
if (!wm8350->unlocked) {
if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
return false;
}
return wm8350_reg_io_map[reg].writable;
}
static bool wm8350_volatile(struct device *dev, unsigned int reg)
{
return wm8350_reg_io_map[reg].vol;
}
static bool wm8350_precious(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8350_SYSTEM_INTERRUPTS:
case WM8350_INT_STATUS_1:
case WM8350_INT_STATUS_2:
case WM8350_POWER_UP_INT_STATUS:
case WM8350_UNDER_VOLTAGE_INT_STATUS:
case WM8350_OVER_CURRENT_INT_STATUS:
case WM8350_GPIO_INT_STATUS:
case WM8350_COMPARATOR_INT_STATUS:
return true;
default:
return false;
}
}
const struct regmap_config wm8350_regmap = {
.reg_bits = 8,
.val_bits = 16,
.cache_type = REGCACHE_RBTREE,
.max_register = WM8350_MAX_REGISTER,
.readable_reg = wm8350_readable,
.writeable_reg = wm8350_writeable,
.volatile_reg = wm8350_volatile,
.precious_reg = wm8350_precious,
};
Copy Permalink