1
linux/drivers/dma/ioatdma.h

146 lines
3.8 KiB
C
Raw Normal View History

/*
* Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution in the
* file called COPYING.
*/
#ifndef IOATDMA_H
#define IOATDMA_H
#include <linux/dmaengine.h>
#include "ioatdma_hw.h"
#include <linux/init.h>
#include <linux/dmapool.h>
#include <linux/cache.h>
#include <linux/pci_ids.h>
#define IOAT_DMA_VERSION "1.26"
enum ioat_interrupt {
none = 0,
msix_multi_vector = 1,
msix_single_vector = 2,
msi = 3,
intx = 4,
};
#define IOAT_LOW_COMPLETION_MASK 0xffffffc0
/**
* struct ioatdma_device - internal representation of a IOAT device
* @pdev: PCI-Express device
* @reg_base: MMIO register space base address
* @dma_pool: for allocating DMA descriptors
* @common: embedded struct dma_device
* @version: version of ioatdma device
*/
struct ioatdma_device {
struct pci_dev *pdev;
void __iomem *reg_base;
struct pci_pool *dma_pool;
struct pci_pool *completion_pool;
struct dma_device common;
u8 version;
enum ioat_interrupt irq_mode;
struct msix_entry msix_entries[4];
struct ioat_dma_chan *idx[4];
};
/**
* struct ioat_dma_chan - internal representation of a DMA channel
* @device:
* @reg_base:
* @sw_in_use:
* @completion:
* @completion_low:
* @completion_high:
* @completed_cookie: last cookie seen completed on cleanup
* @cookie: value of last cookie given to client
* @last_completion:
* @xfercap:
* @desc_lock:
* @free_desc:
* @used_desc:
* @resource:
* @device_node:
*/
struct ioat_dma_chan {
void __iomem *reg_base;
dma_cookie_t completed_cookie;
unsigned long last_completion;
u32 xfercap; /* XFERCAP register value expanded out */
spinlock_t cleanup_lock;
spinlock_t desc_lock;
struct list_head free_desc;
struct list_head used_desc;
int pending;
struct ioatdma_device *device;
struct dma_chan common;
dma_addr_t completion_addr;
union {
u64 full; /* HW completion writeback */
struct {
u32 low;
u32 high;
};
} *completion_virt;
struct tasklet_struct cleanup_task;
};
/* wrapper around hardware descriptor format + additional software fields */
/**
* struct ioat_desc_sw - wrapper around hardware descriptor
* @hw: hardware DMA descriptor
dmaengine: refactor dmaengine around dma_async_tx_descriptor The current dmaengine interface defines mutliple routines per operation, i.e. dma_async_memcpy_buf_to_buf, dma_async_memcpy_buf_to_page etc. Adding more operation types (xor, crc, etc) to this model would result in an unmanageable number of method permutations. Are we really going to add a set of hooks for each DMA engine whizbang feature? - Jeff Garzik The descriptor creation process is refactored using the new common dma_async_tx_descriptor structure. Instead of per driver do_<operation>_<dest>_to_<src> methods, drivers integrate dma_async_tx_descriptor into their private software descriptor and then define a 'prep' routine per operation. The prep routine allocates a descriptor and ensures that the tx_set_src, tx_set_dest, tx_submit routines are valid. Descriptor creation and submission becomes: struct dma_device *dev; struct dma_chan *chan; struct dma_async_tx_descriptor *tx; tx = dev->device_prep_dma_<operation>(chan, len, int_flag) tx->tx_set_src(dma_addr_t, tx, index /* for multi-source ops */) tx->tx_set_dest(dma_addr_t, tx, index) tx->tx_submit(tx) In addition to the refactoring, dma_async_tx_descriptor also lays the groundwork for definining cross-channel-operation dependencies, and a callback facility for asynchronous notification of operation completion. Changelog: * drop dma mapping methods, suggested by Chris Leech * fix ioat_dma_dependency_added, also caught by Andrew Morton * fix dma_sync_wait, change from Andrew Morton * uninline large functions, change from Andrew Morton * add tx->callback = NULL to dmaengine calls to interoperate with async_tx calls * hookup ioat_tx_submit * convert channel capabilities to a 'cpumask_t like' bitmap * removed DMA_TX_ARRAY_INIT, no longer needed * checkpatch.pl fixes * make set_src, set_dest, and tx_submit descriptor specific methods * fixup git-ioat merge * move group_list and phys to dma_async_tx_descriptor Cc: Jeff Garzik <jeff@garzik.org> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
2007-01-02 11:10:43 -07:00
* @node: this descriptor will either be on the free list,
* or attached to a transaction list (async_tx.tx_list)
* @tx_cnt: number of descriptors required to complete the transaction
* @async_tx: the generic software descriptor for all engines
*/
struct ioat_desc_sw {
struct ioat_dma_descriptor *hw;
struct list_head node;
dmaengine: refactor dmaengine around dma_async_tx_descriptor The current dmaengine interface defines mutliple routines per operation, i.e. dma_async_memcpy_buf_to_buf, dma_async_memcpy_buf_to_page etc. Adding more operation types (xor, crc, etc) to this model would result in an unmanageable number of method permutations. Are we really going to add a set of hooks for each DMA engine whizbang feature? - Jeff Garzik The descriptor creation process is refactored using the new common dma_async_tx_descriptor structure. Instead of per driver do_<operation>_<dest>_to_<src> methods, drivers integrate dma_async_tx_descriptor into their private software descriptor and then define a 'prep' routine per operation. The prep routine allocates a descriptor and ensures that the tx_set_src, tx_set_dest, tx_submit routines are valid. Descriptor creation and submission becomes: struct dma_device *dev; struct dma_chan *chan; struct dma_async_tx_descriptor *tx; tx = dev->device_prep_dma_<operation>(chan, len, int_flag) tx->tx_set_src(dma_addr_t, tx, index /* for multi-source ops */) tx->tx_set_dest(dma_addr_t, tx, index) tx->tx_submit(tx) In addition to the refactoring, dma_async_tx_descriptor also lays the groundwork for definining cross-channel-operation dependencies, and a callback facility for asynchronous notification of operation completion. Changelog: * drop dma mapping methods, suggested by Chris Leech * fix ioat_dma_dependency_added, also caught by Andrew Morton * fix dma_sync_wait, change from Andrew Morton * uninline large functions, change from Andrew Morton * add tx->callback = NULL to dmaengine calls to interoperate with async_tx calls * hookup ioat_tx_submit * convert channel capabilities to a 'cpumask_t like' bitmap * removed DMA_TX_ARRAY_INIT, no longer needed * checkpatch.pl fixes * make set_src, set_dest, and tx_submit descriptor specific methods * fixup git-ioat merge * move group_list and phys to dma_async_tx_descriptor Cc: Jeff Garzik <jeff@garzik.org> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
2007-01-02 11:10:43 -07:00
int tx_cnt;
size_t len;
dma_addr_t src;
dma_addr_t dst;
dmaengine: refactor dmaengine around dma_async_tx_descriptor The current dmaengine interface defines mutliple routines per operation, i.e. dma_async_memcpy_buf_to_buf, dma_async_memcpy_buf_to_page etc. Adding more operation types (xor, crc, etc) to this model would result in an unmanageable number of method permutations. Are we really going to add a set of hooks for each DMA engine whizbang feature? - Jeff Garzik The descriptor creation process is refactored using the new common dma_async_tx_descriptor structure. Instead of per driver do_<operation>_<dest>_to_<src> methods, drivers integrate dma_async_tx_descriptor into their private software descriptor and then define a 'prep' routine per operation. The prep routine allocates a descriptor and ensures that the tx_set_src, tx_set_dest, tx_submit routines are valid. Descriptor creation and submission becomes: struct dma_device *dev; struct dma_chan *chan; struct dma_async_tx_descriptor *tx; tx = dev->device_prep_dma_<operation>(chan, len, int_flag) tx->tx_set_src(dma_addr_t, tx, index /* for multi-source ops */) tx->tx_set_dest(dma_addr_t, tx, index) tx->tx_submit(tx) In addition to the refactoring, dma_async_tx_descriptor also lays the groundwork for definining cross-channel-operation dependencies, and a callback facility for asynchronous notification of operation completion. Changelog: * drop dma mapping methods, suggested by Chris Leech * fix ioat_dma_dependency_added, also caught by Andrew Morton * fix dma_sync_wait, change from Andrew Morton * uninline large functions, change from Andrew Morton * add tx->callback = NULL to dmaengine calls to interoperate with async_tx calls * hookup ioat_tx_submit * convert channel capabilities to a 'cpumask_t like' bitmap * removed DMA_TX_ARRAY_INIT, no longer needed * checkpatch.pl fixes * make set_src, set_dest, and tx_submit descriptor specific methods * fixup git-ioat merge * move group_list and phys to dma_async_tx_descriptor Cc: Jeff Garzik <jeff@garzik.org> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
2007-01-02 11:10:43 -07:00
struct dma_async_tx_descriptor async_tx;
};
#if defined(CONFIG_INTEL_IOATDMA) || defined(CONFIG_INTEL_IOATDMA_MODULE)
struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
void __iomem *iobase);
void ioat_dma_remove(struct ioatdma_device *device);
struct dca_provider *ioat_dca_init(struct pci_dev *pdev,
void __iomem *iobase);
#else
#define ioat_dma_probe(pdev, iobase) NULL
#define ioat_dma_remove(device) do { } while (0)
#define ioat_dca_init(pdev, iobase) NULL
#endif
#endif /* IOATDMA_H */