kevin/linux
1
Fork 0
Code
7e491092e4
linux/drivers/video/backlight/Kconfig

69 lines
1.9 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
# Backlight & LCD drivers configuration
#
menuconfig BACKLIGHT_LCD_SUPPORT
bool "Backlight & LCD device support"
help
Enable this to be able to choose the drivers for controlling the
backlight and the LCD panel on some platforms, for example on PDAs.
config BACKLIGHT_CLASS_DEVICE
tristate "Lowlevel Backlight controls"
[PATCH] fbdev: statically link the framebuffer notification functions The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-30 03:04:17 -07:00
depends on BACKLIGHT_LCD_SUPPORT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
default m
help
This framework adds support for low-level control of the LCD
backlight. This includes support for brightness and power.
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
config BACKLIGHT_DEVICE
bool
depends on BACKLIGHT_CLASS_DEVICE
default y
config LCD_CLASS_DEVICE
tristate "Lowlevel LCD controls"
[PATCH] fbdev: statically link the framebuffer notification functions The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-30 03:04:17 -07:00
depends on BACKLIGHT_LCD_SUPPORT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
default m
help
This framework adds support for low-level control of LCD.
Some framebuffer devices connect to platform-specific LCD modules
in order to have a platform-specific way to control the flat panel
(contrast and applying power to the LCD (not to the backlight!)).
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
config LCD_DEVICE
bool
depends on LCD_CLASS_DEVICE
default y
config BACKLIGHT_CORGI
[PATCH] backlight: corgi_bl: Generalise to support other Sharp SL hardware Generalise the Corgi backlight driver by moving the default intensity and limit mask settings into the platform specific data structure. This enables the driver to support other Zaurus hardware, specifically the SL-6000x (Tosa) model. Also change the spinlock to a mutex (the spinlock is overkill). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:51 -07:00
tristate "Sharp Corgi Backlight Driver (SL Series)"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
depends on BACKLIGHT_DEVICE && PXA_SHARPSL
default y
help
[PATCH] backlight: corgi_bl: Generalise to support other Sharp SL hardware Generalise the Corgi backlight driver by moving the default intensity and limit mask settings into the platform specific data structure. This enables the driver to support other Zaurus hardware, specifically the SL-6000x (Tosa) model. Also change the spinlock to a mutex (the spinlock is overkill). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 03:31:51 -07:00
If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
backlight driver.
[PATCH] backlight: LOCOMO Backlight Driver updates Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:26:27 -07:00
config BACKLIGHT_LOCOMO
tristate "Sharp LOCOMO LCD/Backlight Driver"
depends on BACKLIGHT_DEVICE && SHARP_LOCOMO
default y
help
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
enable the LCD/backlight driver.
[PATCH] video: hp680 backlight driver This adds support for the hp680 backlight, as found in the hp6xx series of sh devices. Signed-off-by: Andriy Skulysh <askulysh@image.kiev.ua> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 04:06:53 -07:00
config BACKLIGHT_HP680
tristate "HP Jornada 680 Backlight Driver"
depends on BACKLIGHT_DEVICE && SH_HP6XX
default y
help
If you have a HP Jornada 680, say y to enable the
backlight driver.
Copy Permalink