1
linux/net/ipv4/udp.c

1764 lines
43 KiB
C
Raw Normal View History

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* The User Datagram Protocol (UDP).
*
* Version: $Id: udp.c,v 1.102 2002/02/01 22:01:04 davem Exp $
*
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Arnt Gulbrandsen, <agulbra@nvg.unit.no>
* Alan Cox, <Alan.Cox@linux.org>
* Hirokazu Takahashi, <taka@valinux.co.jp>
*
* Fixes:
* Alan Cox : verify_area() calls
* Alan Cox : stopped close while in use off icmp
* messages. Not a fix but a botch that
* for udp at least is 'valid'.
* Alan Cox : Fixed icmp handling properly
* Alan Cox : Correct error for oversized datagrams
* Alan Cox : Tidied select() semantics.
* Alan Cox : udp_err() fixed properly, also now
* select and read wake correctly on errors
* Alan Cox : udp_send verify_area moved to avoid mem leak
* Alan Cox : UDP can count its memory
* Alan Cox : send to an unknown connection causes
* an ECONNREFUSED off the icmp, but
* does NOT close.
* Alan Cox : Switched to new sk_buff handlers. No more backlog!
* Alan Cox : Using generic datagram code. Even smaller and the PEEK
* bug no longer crashes it.
* Fred Van Kempen : Net2e support for sk->broadcast.
* Alan Cox : Uses skb_free_datagram
* Alan Cox : Added get/set sockopt support.
* Alan Cox : Broadcasting without option set returns EACCES.
* Alan Cox : No wakeup calls. Instead we now use the callbacks.
* Alan Cox : Use ip_tos and ip_ttl
* Alan Cox : SNMP Mibs
* Alan Cox : MSG_DONTROUTE, and 0.0.0.0 support.
* Matt Dillon : UDP length checks.
* Alan Cox : Smarter af_inet used properly.
* Alan Cox : Use new kernel side addressing.
* Alan Cox : Incorrect return on truncated datagram receive.
* Arnt Gulbrandsen : New udp_send and stuff
* Alan Cox : Cache last socket
* Alan Cox : Route cache
* Jon Peatfield : Minor efficiency fix to sendto().
* Mike Shaver : RFC1122 checks.
* Alan Cox : Nonblocking error fix.
* Willy Konynenberg : Transparent proxying support.
* Mike McLagan : Routing by source
* David S. Miller : New socket lookup architecture.
* Last socket cache retained as it
* does have a high hit rate.
* Olaf Kirch : Don't linearise iovec on sendmsg.
* Andi Kleen : Some cleanups, cache destination entry
* for connect.
* Vitaly E. Lavrov : Transparent proxy revived after year coma.
* Melvin Smith : Check msg_name not msg_namelen in sendto(),
* return ENOTCONN for unconnected sockets (POSIX)
* Janos Farkas : don't deliver multi/broadcasts to a different
* bound-to-device socket
* Hirokazu Takahashi : HW checksumming for outgoing UDP
* datagrams.
* Hirokazu Takahashi : sendfile() on UDP works now.
* Arnaldo C. Melo : convert /proc/net/udp to seq_file
* YOSHIFUJI Hideaki @USAGI and: Support IPV6_V6ONLY socket option, which
* Alexey Kuznetsov: allow both IPv4 and IPv6 sockets to bind
* a single port at the same time.
* Derek Atkins <derek@ihtfp.com>: Add Encapulation Support
* James Chapman : Add L2TP encapsulation type.
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
#include <linux/bootmem.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/igmp.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <net/tcp_states.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <net/net_namespace.h>
#include <net/icmp.h>
#include <net/route.h>
#include <net/checksum.h>
#include <net/xfrm.h>
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
#include "udp_impl.h"
/*
* Snmp MIB for the UDP layer
*/
DEFINE_SNMP_STAT(struct udp_mib, udp_statistics) __read_mostly;
EXPORT_SYMBOL(udp_statistics);
DEFINE_SNMP_STAT(struct udp_mib, udp_stats_in6) __read_mostly;
EXPORT_SYMBOL(udp_stats_in6);
struct hlist_head udp_hash[UDP_HTABLE_SIZE];
DEFINE_RWLOCK(udp_hash_lock);
int sysctl_udp_mem[3] __read_mostly;
int sysctl_udp_rmem_min __read_mostly;
int sysctl_udp_wmem_min __read_mostly;
EXPORT_SYMBOL(sysctl_udp_mem);
EXPORT_SYMBOL(sysctl_udp_rmem_min);
EXPORT_SYMBOL(sysctl_udp_wmem_min);
atomic_t udp_memory_allocated;
EXPORT_SYMBOL(udp_memory_allocated);
static inline int __udp_lib_lport_inuse(struct net *net, __u16 num,
const struct hlist_head udptable[])
{
struct sock *sk;
struct hlist_node *node;
sk_for_each(sk, node, &udptable[num & (UDP_HTABLE_SIZE - 1)])
if (sk->sk_net == net && sk->sk_hash == num)
return 1;
return 0;
}
/**
* udp_lib_get_port - UDP/-Lite port lookup for IPv4 and IPv6
*
* @sk: socket struct in question
* @snum: port number to look up
* @saddr_comp: AF-dependent comparison of bound local IP addresses
*/
int udp_lib_get_port(struct sock *sk, unsigned short snum,
int (*saddr_comp)(const struct sock *sk1,
const struct sock *sk2 ) )
{
struct hlist_head *udptable = sk->sk_prot->h.udp_hash;
struct hlist_node *node;
struct hlist_head *head;
struct sock *sk2;
int error = 1;
struct net *net = sk->sk_net;
write_lock_bh(&udp_hash_lock);
if (!snum) {
int i, low, high, remaining;
unsigned rover, best, best_size_so_far;
inet_get_local_port_range(&low, &high);
remaining = (high - low) + 1;
best_size_so_far = UINT_MAX;
best = rover = net_random() % remaining + low;
/* 1st pass: look for empty (or shortest) hash chain */
for (i = 0; i < UDP_HTABLE_SIZE; i++) {
int size = 0;
head = &udptable[rover & (UDP_HTABLE_SIZE - 1)];
if (hlist_empty(head))
goto gotit;
sk_for_each(sk2, node, head) {
if (++size >= best_size_so_far)
goto next;
}
best_size_so_far = size;
best = rover;
next:
/* fold back if end of range */
if (++rover > high)
rover = low + ((rover - low)
& (UDP_HTABLE_SIZE - 1));
}
/* 2nd pass: find hole in shortest hash chain */
rover = best;
for (i = 0; i < (1 << 16) / UDP_HTABLE_SIZE; i++) {
if (! __udp_lib_lport_inuse(net, rover, udptable))
goto gotit;
rover += UDP_HTABLE_SIZE;
if (rover > high)
rover = low + ((rover - low)
& (UDP_HTABLE_SIZE - 1));
}
/* All ports in use! */
goto fail;
gotit:
snum = rover;
} else {
head = &udptable[snum & (UDP_HTABLE_SIZE - 1)];
sk_for_each(sk2, node, head)
if (sk2->sk_hash == snum &&
sk2 != sk &&
sk2->sk_net == net &&
(!sk2->sk_reuse || !sk->sk_reuse) &&
(!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
(*saddr_comp)(sk, sk2) )
goto fail;
}
inet_sk(sk)->num = snum;
sk->sk_hash = snum;
if (sk_unhashed(sk)) {
head = &udptable[snum & (UDP_HTABLE_SIZE - 1)];
sk_add_node(sk, head);
sock_prot_inuse_add(sk->sk_prot, 1);
}
error = 0;
fail:
write_unlock_bh(&udp_hash_lock);
return error;
}
static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
{
struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
return ( !ipv6_only_sock(sk2) &&
(!inet1->rcv_saddr || !inet2->rcv_saddr ||
inet1->rcv_saddr == inet2->rcv_saddr ));
}
int udp_v4_get_port(struct sock *sk, unsigned short snum)
{
return udp_lib_get_port(sk, snum, ipv4_rcv_saddr_equal);
}
/* UDP is nearly always wildcards out the wazoo, it makes no sense to try
* harder than this. -DaveM
*/
static struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr,
__be16 sport, __be32 daddr, __be16 dport,
int dif, struct hlist_head udptable[])
{
struct sock *sk, *result = NULL;
struct hlist_node *node;
unsigned short hnum = ntohs(dport);
int badness = -1;
read_lock(&udp_hash_lock);
sk_for_each(sk, node, &udptable[hnum & (UDP_HTABLE_SIZE - 1)]) {
struct inet_sock *inet = inet_sk(sk);
if (sk->sk_net == net && sk->sk_hash == hnum &&
!ipv6_only_sock(sk)) {
int score = (sk->sk_family == PF_INET ? 1 : 0);
if (inet->rcv_saddr) {
if (inet->rcv_saddr != daddr)
continue;
score+=2;
}
if (inet->daddr) {
if (inet->daddr != saddr)
continue;
score+=2;
}
if (inet->dport) {
if (inet->dport != sport)
continue;
score+=2;
}
if (sk->sk_bound_dev_if) {
if (sk->sk_bound_dev_if != dif)
continue;
score+=2;
}
if (score == 9) {
result = sk;
break;
} else if (score > badness) {
result = sk;
badness = score;
}
}
}
if (result)
sock_hold(result);
read_unlock(&udp_hash_lock);
return result;
}
static inline struct sock *udp_v4_mcast_next(struct sock *sk,
__be16 loc_port, __be32 loc_addr,
__be16 rmt_port, __be32 rmt_addr,
int dif)
{
struct hlist_node *node;
struct sock *s = sk;
unsigned short hnum = ntohs(loc_port);
sk_for_each_from(s, node) {
struct inet_sock *inet = inet_sk(s);
if (s->sk_hash != hnum ||
(inet->daddr && inet->daddr != rmt_addr) ||
(inet->dport != rmt_port && inet->dport) ||
(inet->rcv_saddr && inet->rcv_saddr != loc_addr) ||
ipv6_only_sock(s) ||
(s->sk_bound_dev_if && s->sk_bound_dev_if != dif))
continue;
if (!ip_mc_sf_allow(s, loc_addr, rmt_addr, dif))
continue;
goto found;
}
s = NULL;
found:
return s;
}
/*
* This routine is called by the ICMP module when it gets some
* sort of error condition. If err < 0 then the socket should
* be closed and the error returned to the user. If err > 0
* it's just the icmp type << 8 | icmp code.
* Header points to the ip header of the error packet. We move
* on past this. Then (as it used to claim before adjustment)
* header points to the first 8 bytes of the udp header. We need
* to find the appropriate port.
*/
void __udp4_lib_err(struct sk_buff *skb, u32 info, struct hlist_head udptable[])
{
struct inet_sock *inet;
struct iphdr *iph = (struct iphdr*)skb->data;
struct udphdr *uh = (struct udphdr*)(skb->data+(iph->ihl<<2));
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct sock *sk;
int harderr;
int err;
sk = __udp4_lib_lookup(skb->dev->nd_net, iph->daddr, uh->dest,
iph->saddr, uh->source, skb->dev->ifindex, udptable);
if (sk == NULL) {
ICMP_INC_STATS_BH(ICMP_MIB_INERRORS);
return; /* No socket for error */
}
err = 0;
harderr = 0;
inet = inet_sk(sk);
switch (type) {
default:
case ICMP_TIME_EXCEEDED:
err = EHOSTUNREACH;
break;
case ICMP_SOURCE_QUENCH:
goto out;
case ICMP_PARAMETERPROB:
err = EPROTO;
harderr = 1;
break;
case ICMP_DEST_UNREACH:
if (code == ICMP_FRAG_NEEDED) { /* Path MTU discovery */
if (inet->pmtudisc != IP_PMTUDISC_DONT) {
err = EMSGSIZE;
harderr = 1;
break;
}
goto out;
}
err = EHOSTUNREACH;
if (code <= NR_ICMP_UNREACH) {
harderr = icmp_err_convert[code].fatal;
err = icmp_err_convert[code].errno;
}
break;
}
/*
* RFC1122: OK. Passes ICMP errors back to application, as per
* 4.1.3.3.
*/
if (!inet->recverr) {
if (!harderr || sk->sk_state != TCP_ESTABLISHED)
goto out;
} else {
ip_icmp_error(sk, skb, err, uh->dest, info, (u8*)(uh+1));
}
sk->sk_err = err;
sk->sk_error_report(sk);
out:
sock_put(sk);
}
void udp_err(struct sk_buff *skb, u32 info)
{
__udp4_lib_err(skb, info, udp_hash);
}
/*
* Throw away all pending data and cancel the corking. Socket is locked.
*/
static void udp_flush_pending_frames(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
if (up->pending) {
up->len = 0;
up->pending = 0;
ip_flush_pending_frames(sk);
}
}
/**
* udp4_hwcsum_outgoing - handle outgoing HW checksumming
* @sk: socket we are sending on
* @skb: sk_buff containing the filled-in UDP header
* (checksum field must be zeroed out)
*/
static void udp4_hwcsum_outgoing(struct sock *sk, struct sk_buff *skb,
__be32 src, __be32 dst, int len )
{
unsigned int offset;
struct udphdr *uh = udp_hdr(skb);
__wsum csum = 0;
if (skb_queue_len(&sk->sk_write_queue) == 1) {
/*
* Only one fragment on the socket.
*/
skb->csum_start = skb_transport_header(skb) - skb->head;
skb->csum_offset = offsetof(struct udphdr, check);
uh->check = ~csum_tcpudp_magic(src, dst, len, IPPROTO_UDP, 0);
} else {
/*
* HW-checksum won't work as there are two or more
* fragments on the socket so that all csums of sk_buffs
* should be together
*/
offset = skb_transport_offset(skb);
skb->csum = skb_checksum(skb, offset, skb->len - offset, 0);
skb->ip_summed = CHECKSUM_NONE;
skb_queue_walk(&sk->sk_write_queue, skb) {
csum = csum_add(csum, skb->csum);
}
uh->check = csum_tcpudp_magic(src, dst, len, IPPROTO_UDP, csum);
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
}
}
/*
* Push out all pending data as one UDP datagram. Socket is locked.
*/
static int udp_push_pending_frames(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
struct inet_sock *inet = inet_sk(sk);
struct flowi *fl = &inet->cork.fl;
struct sk_buff *skb;
struct udphdr *uh;
int err = 0;
int is_udplite = IS_UDPLITE(sk);
__wsum csum = 0;
/* Grab the skbuff where UDP header space exists. */
if ((skb = skb_peek(&sk->sk_write_queue)) == NULL)
goto out;
/*
* Create a UDP header
*/
uh = udp_hdr(skb);
uh->source = fl->fl_ip_sport;
uh->dest = fl->fl_ip_dport;
uh->len = htons(up->len);
uh->check = 0;
if (is_udplite) /* UDP-Lite */
csum = udplite_csum_outgoing(sk, skb);
else if (sk->sk_no_check == UDP_CSUM_NOXMIT) { /* UDP csum disabled */
skb->ip_summed = CHECKSUM_NONE;
goto send;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) { /* UDP hardware csum */
udp4_hwcsum_outgoing(sk, skb, fl->fl4_src,fl->fl4_dst, up->len);
goto send;
} else /* `normal' UDP */
csum = udp_csum_outgoing(sk, skb);
/* add protocol-dependent pseudo-header */
uh->check = csum_tcpudp_magic(fl->fl4_src, fl->fl4_dst, up->len,
sk->sk_protocol, csum );
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
send:
err = ip_push_pending_frames(sk);
out:
up->len = 0;
up->pending = 0;
if (!err)
UDP_INC_STATS_USER(UDP_MIB_OUTDATAGRAMS, is_udplite);
return err;
}
int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
size_t len)
{
struct inet_sock *inet = inet_sk(sk);
struct udp_sock *up = udp_sk(sk);
int ulen = len;
struct ipcm_cookie ipc;
struct rtable *rt = NULL;
int free = 0;
int connected = 0;
__be32 daddr, faddr, saddr;
__be16 dport;
u8 tos;
int err, is_udplite = IS_UDPLITE(sk);
int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
if (len > 0xFFFF)
return -EMSGSIZE;
/*
* Check the flags.
*/
if (msg->msg_flags&MSG_OOB) /* Mirror BSD error message compatibility */
return -EOPNOTSUPP;
ipc.opt = NULL;
if (up->pending) {
/*
* There are pending frames.
* The socket lock must be held while it's corked.
*/
lock_sock(sk);
if (likely(up->pending)) {
if (unlikely(up->pending != AF_INET)) {
release_sock(sk);
return -EINVAL;
}
goto do_append_data;
}
release_sock(sk);
}
ulen += sizeof(struct udphdr);
/*
* Get and verify the address.
*/
if (msg->msg_name) {
struct sockaddr_in * usin = (struct sockaddr_in*)msg->msg_name;
if (msg->msg_namelen < sizeof(*usin))
return -EINVAL;
if (usin->sin_family != AF_INET) {
if (usin->sin_family != AF_UNSPEC)
return -EAFNOSUPPORT;
}
daddr = usin->sin_addr.s_addr;
dport = usin->sin_port;
if (dport == 0)
return -EINVAL;
} else {
if (sk->sk_state != TCP_ESTABLISHED)
return -EDESTADDRREQ;
daddr = inet->daddr;
dport = inet->dport;
/* Open fast path for connected socket.
Route will not be used, if at least one option is set.
*/
connected = 1;
}
ipc.addr = inet->saddr;
ipc.oif = sk->sk_bound_dev_if;
if (msg->msg_controllen) {
err = ip_cmsg_send(sk->sk_net, msg, &ipc);
if (err)
return err;
if (ipc.opt)
free = 1;
connected = 0;
}
if (!ipc.opt)
ipc.opt = inet->opt;
saddr = ipc.addr;
ipc.addr = faddr = daddr;
if (ipc.opt && ipc.opt->srr) {
if (!daddr)
return -EINVAL;
faddr = ipc.opt->faddr;
connected = 0;
}
tos = RT_TOS(inet->tos);
if (sock_flag(sk, SOCK_LOCALROUTE) ||
(msg->msg_flags & MSG_DONTROUTE) ||
(ipc.opt && ipc.opt->is_strictroute)) {
tos |= RTO_ONLINK;
connected = 0;
}
if (ipv4_is_multicast(daddr)) {
if (!ipc.oif)
ipc.oif = inet->mc_index;
if (!saddr)
saddr = inet->mc_addr;
connected = 0;
}
if (connected)
rt = (struct rtable*)sk_dst_check(sk, 0);
if (rt == NULL) {
struct flowi fl = { .oif = ipc.oif,
.nl_u = { .ip4_u =
{ .daddr = faddr,
.saddr = saddr,
.tos = tos } },
.proto = sk->sk_protocol,
.uli_u = { .ports =
{ .sport = inet->sport,
.dport = dport } } };
security_sk_classify_flow(sk, &fl);
err = ip_route_output_flow(sk->sk_net, &rt, &fl, sk, 1);
if (err) {
if (err == -ENETUNREACH)
IP_INC_STATS_BH(IPSTATS_MIB_OUTNOROUTES);
goto out;
}
err = -EACCES;
if ((rt->rt_flags & RTCF_BROADCAST) &&
!sock_flag(sk, SOCK_BROADCAST))
goto out;
if (connected)
sk_dst_set(sk, dst_clone(&rt->u.dst));
}
if (msg->msg_flags&MSG_CONFIRM)
goto do_confirm;
back_from_confirm:
saddr = rt->rt_src;
if (!ipc.addr)
daddr = ipc.addr = rt->rt_dst;
lock_sock(sk);
if (unlikely(up->pending)) {
/* The socket is already corked while preparing it. */
/* ... which is an evident application bug. --ANK */
release_sock(sk);
LIMIT_NETDEBUG(KERN_DEBUG "udp cork app bug 2\n");
err = -EINVAL;
goto out;
}
/*
* Now cork the socket to pend data.
*/
inet->cork.fl.fl4_dst = daddr;
inet->cork.fl.fl_ip_dport = dport;
inet->cork.fl.fl4_src = saddr;
inet->cork.fl.fl_ip_sport = inet->sport;
up->pending = AF_INET;
do_append_data:
up->len += ulen;
getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
err = ip_append_data(sk, getfrag, msg->msg_iov, ulen,
sizeof(struct udphdr), &ipc, rt,
corkreq ? msg->msg_flags|MSG_MORE : msg->msg_flags);
if (err)
udp_flush_pending_frames(sk);
else if (!corkreq)
err = udp_push_pending_frames(sk);
else if (unlikely(skb_queue_empty(&sk->sk_write_queue)))
up->pending = 0;
release_sock(sk);
out:
ip_rt_put(rt);
if (free)
kfree(ipc.opt);
if (!err)
return len;
/*
* ENOBUFS = no kernel mem, SOCK_NOSPACE = no sndbuf space. Reporting
* ENOBUFS might not be good (it's not tunable per se), but otherwise
* we don't have a good statistic (IpOutDiscards but it can be too many
* things). We could add another new stat but at least for now that
* seems like overkill.
*/
if (err == -ENOBUFS || test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
UDP_INC_STATS_USER(UDP_MIB_SNDBUFERRORS, is_udplite);
}
return err;
do_confirm:
dst_confirm(&rt->u.dst);
if (!(msg->msg_flags&MSG_PROBE) || len)
goto back_from_confirm;
err = 0;
goto out;
}
int udp_sendpage(struct sock *sk, struct page *page, int offset,
size_t size, int flags)
{
struct udp_sock *up = udp_sk(sk);
int ret;
if (!up->pending) {
struct msghdr msg = { .msg_flags = flags|MSG_MORE };
/* Call udp_sendmsg to specify destination address which
* sendpage interface can't pass.
* This will succeed only when the socket is connected.
*/
ret = udp_sendmsg(NULL, sk, &msg, 0);
if (ret < 0)
return ret;
}
lock_sock(sk);
if (unlikely(!up->pending)) {
release_sock(sk);
LIMIT_NETDEBUG(KERN_DEBUG "udp cork app bug 3\n");
return -EINVAL;
}
ret = ip_append_page(sk, page, offset, size, flags);
if (ret == -EOPNOTSUPP) {
release_sock(sk);
return sock_no_sendpage(sk->sk_socket, page, offset,
size, flags);
}
if (ret < 0) {
udp_flush_pending_frames(sk);
goto out;
}
up->len += size;
if (!(up->corkflag || (flags&MSG_MORE)))
ret = udp_push_pending_frames(sk);
if (!ret)
ret = size;
out:
release_sock(sk);
return ret;
}
/*
* IOCTL requests applicable to the UDP protocol
*/
int udp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
switch (cmd) {
case SIOCOUTQ:
{
int amount = atomic_read(&sk->sk_wmem_alloc);
return put_user(amount, (int __user *)arg);
}
case SIOCINQ:
{
struct sk_buff *skb;
unsigned long amount;
amount = 0;
spin_lock_bh(&sk->sk_receive_queue.lock);
skb = skb_peek(&sk->sk_receive_queue);
if (skb != NULL) {
/*
* We will only return the amount
* of this packet since that is all
* that will be read.
*/
amount = skb->len - sizeof(struct udphdr);
}
spin_unlock_bh(&sk->sk_receive_queue.lock);
return put_user(amount, (int __user *)arg);
}
default:
return -ENOIOCTLCMD;
}
return 0;
}
/*
* This should be easy, if there is something there we
* return it, otherwise we block.
*/
int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
size_t len, int noblock, int flags, int *addr_len)
{
struct inet_sock *inet = inet_sk(sk);
struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
struct sk_buff *skb;
unsigned int ulen, copied;
int peeked;
int err;
int is_udplite = IS_UDPLITE(sk);
/*
* Check any passed addresses
*/
if (addr_len)
*addr_len=sizeof(*sin);
if (flags & MSG_ERRQUEUE)
return ip_recv_error(sk, msg, len);
try_again:
skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
&peeked, &err);
if (!skb)
goto out;
ulen = skb->len - sizeof(struct udphdr);
copied = len;
if (copied > ulen)
copied = ulen;
else if (copied < ulen)
msg->msg_flags |= MSG_TRUNC;
/*
* If checksum is needed at all, try to do it while copying the
* data. If the data is truncated, or if we only want a partial
* coverage checksum (UDP-Lite), do it before the copy.
*/
if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
if (udp_lib_checksum_complete(skb))
goto csum_copy_err;
}
if (skb_csum_unnecessary(skb))
err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
msg->msg_iov, copied );
else {
err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov);
if (err == -EINVAL)
goto csum_copy_err;
}
if (err)
goto out_free;
if (!peeked)
UDP_INC_STATS_USER(UDP_MIB_INDATAGRAMS, is_udplite);
sock_recv_timestamp(msg, sk, skb);
/* Copy the address. */
if (sin)
{
sin->sin_family = AF_INET;
sin->sin_port = udp_hdr(skb)->source;
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
}
if (inet->cmsg_flags)
ip_cmsg_recv(msg, skb);
err = copied;
if (flags & MSG_TRUNC)
err = ulen;
out_free:
lock_sock(sk);
skb_free_datagram(sk, skb);
release_sock(sk);
out:
return err;
csum_copy_err:
lock_sock(sk);
if (!skb_kill_datagram(sk, skb, flags))
UDP_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite);
release_sock(sk);
if (noblock)
return -EAGAIN;
goto try_again;
}
int udp_disconnect(struct sock *sk, int flags)
{
struct inet_sock *inet = inet_sk(sk);
/*
* 1003.1g - break association.
*/
sk->sk_state = TCP_CLOSE;
inet->daddr = 0;
inet->dport = 0;
sk->sk_bound_dev_if = 0;
if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
inet_reset_saddr(sk);
if (!(sk->sk_userlocks & SOCK_BINDPORT_LOCK)) {
sk->sk_prot->unhash(sk);
inet->sport = 0;
}
sk_dst_reset(sk);
return 0;
}
/* returns:
* -1: error
* 0: success
* >0: "udp encap" protocol resubmission
*
* Note that in the success and error cases, the skb is assumed to
* have either been requeued or freed.
*/
int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
{
struct udp_sock *up = udp_sk(sk);
int rc;
int is_udplite = IS_UDPLITE(sk);
/*
* Charge it to the socket, dropping if the queue is full.
*/
if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
goto drop;
nf_reset(skb);
if (up->encap_type) {
/*
* This is an encapsulation socket so pass the skb to
* the socket's udp_encap_rcv() hook. Otherwise, just
* fall through and pass this up the UDP socket.
* up->encap_rcv() returns the following value:
* =0 if skb was successfully passed to the encap
* handler or was discarded by it.
* >0 if skb should be passed on to UDP.
* <0 if skb should be resubmitted as proto -N
*/
/* if we're overly short, let UDP handle it */
if (skb->len > sizeof(struct udphdr) &&
up->encap_rcv != NULL) {
int ret;
ret = (*up->encap_rcv)(sk, skb);
if (ret <= 0) {
UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS,
is_udplite);
return -ret;
}
}
/* FALLTHROUGH -- it's a UDP Packet */
}
/*
* UDP-Lite specific tests, ignored on UDP sockets
*/
if ((is_udplite & UDPLITE_RECV_CC) && UDP_SKB_CB(skb)->partial_cov) {
/*
* MIB statistics other than incrementing the error count are
* disabled for the following two types of errors: these depend
* on the application settings, not on the functioning of the
* protocol stack as such.
*
* RFC 3828 here recommends (sec 3.3): "There should also be a
* way ... to ... at least let the receiving application block
* delivery of packets with coverage values less than a value
* provided by the application."
*/
if (up->pcrlen == 0) { /* full coverage was set */
LIMIT_NETDEBUG(KERN_WARNING "UDPLITE: partial coverage "
"%d while full coverage %d requested\n",
UDP_SKB_CB(skb)->cscov, skb->len);
goto drop;
}
/* The next case involves violating the min. coverage requested
* by the receiver. This is subtle: if receiver wants x and x is
* greater than the buffersize/MTU then receiver will complain
* that it wants x while sender emits packets of smaller size y.
* Therefore the above ...()->partial_cov statement is essential.
*/
if (UDP_SKB_CB(skb)->cscov < up->pcrlen) {
LIMIT_NETDEBUG(KERN_WARNING
"UDPLITE: coverage %d too small, need min %d\n",
UDP_SKB_CB(skb)->cscov, up->pcrlen);
goto drop;
}
}
if (sk->sk_filter) {
if (udp_lib_checksum_complete(skb))
goto drop;
}
if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
/* Note that an ENOMEM error is charged twice */
if (rc == -ENOMEM)
UDP_INC_STATS_BH(UDP_MIB_RCVBUFERRORS, is_udplite);
goto drop;
}
return 0;
drop:
UDP_INC_STATS_BH(UDP_MIB_INERRORS, is_udplite);
kfree_skb(skb);
return -1;
}
/*
* Multicasts and broadcasts go to each listener.
*
* Note: called only from the BH handler context,
* so we don't need to lock the hashes.
*/
static int __udp4_lib_mcast_deliver(struct sk_buff *skb,
struct udphdr *uh,
__be32 saddr, __be32 daddr,
struct hlist_head udptable[])
{
struct sock *sk;
int dif;
read_lock(&udp_hash_lock);
sk = sk_head(&udptable[ntohs(uh->dest) & (UDP_HTABLE_SIZE - 1)]);
dif = skb->dev->ifindex;
sk = udp_v4_mcast_next(sk, uh->dest, daddr, uh->source, saddr, dif);
if (sk) {
struct sock *sknext = NULL;
do {
struct sk_buff *skb1 = skb;
sknext = udp_v4_mcast_next(sk_next(sk), uh->dest, daddr,
uh->source, saddr, dif);
if (sknext)
skb1 = skb_clone(skb, GFP_ATOMIC);
if (skb1) {
int ret = 0;
bh_lock_sock_nested(sk);
if (!sock_owned_by_user(sk))
ret = udp_queue_rcv_skb(sk, skb1);
else
sk_add_backlog(sk, skb1);
bh_unlock_sock(sk);
if (ret > 0)
/* we should probably re-process instead
* of dropping packets here. */
kfree_skb(skb1);
}
sk = sknext;
} while (sknext);
} else
kfree_skb(skb);
read_unlock(&udp_hash_lock);
return 0;
}
/* Initialize UDP checksum. If exited with zero value (success),
* CHECKSUM_UNNECESSARY means, that no more checks are required.
* Otherwise, csum completion requires chacksumming packet body,
* including udp header and folding it to skb->csum.
*/
static inline int udp4_csum_init(struct sk_buff *skb, struct udphdr *uh,
int proto)
{
const struct iphdr *iph;
int err;
UDP_SKB_CB(skb)->partial_cov = 0;
UDP_SKB_CB(skb)->cscov = skb->len;
if (proto == IPPROTO_UDPLITE) {
err = udplite_checksum_init(skb, uh);
if (err)
return err;
}
iph = ip_hdr(skb);
if (uh->check == 0) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else if (skb->ip_summed == CHECKSUM_COMPLETE) {
if (!csum_tcpudp_magic(iph->saddr, iph->daddr, skb->len,
proto, skb->csum))
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
if (!skb_csum_unnecessary(skb))
skb->csum = csum_tcpudp_nofold(iph->saddr, iph->daddr,
skb->len, proto, 0);
/* Probably, we should checksum udp header (it should be in cache
* in any case) and data in tiny packets (< rx copybreak).
*/
return 0;
}
/*
* All we need to do is get the socket, and then do a checksum.
*/
int __udp4_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
int proto)
{
struct sock *sk;
struct udphdr *uh = udp_hdr(skb);
unsigned short ulen;
struct rtable *rt = (struct rtable*)skb->dst;
__be32 saddr = ip_hdr(skb)->saddr;
__be32 daddr = ip_hdr(skb)->daddr;
/*
* Validate the packet.
*/
if (!pskb_may_pull(skb, sizeof(struct udphdr)))
goto drop; /* No space for header. */
ulen = ntohs(uh->len);
if (ulen > skb->len)
goto short_packet;
if (proto == IPPROTO_UDP) {
/* UDP validates ulen. */
if (ulen < sizeof(*uh) || pskb_trim_rcsum(skb, ulen))
goto short_packet;
uh = udp_hdr(skb);
}
if (udp4_csum_init(skb, uh, proto))
goto csum_error;
if (rt->rt_flags & (RTCF_BROADCAST|RTCF_MULTICAST))
return __udp4_lib_mcast_deliver(skb, uh, saddr, daddr, udptable);
sk = __udp4_lib_lookup(skb->dev->nd_net, saddr, uh->source, daddr,
uh->dest, inet_iif(skb), udptable);
if (sk != NULL) {
int ret = 0;
bh_lock_sock_nested(sk);
if (!sock_owned_by_user(sk))
ret = udp_queue_rcv_skb(sk, skb);
else
sk_add_backlog(sk, skb);
bh_unlock_sock(sk);
sock_put(sk);
/* a return value > 0 means to resubmit the input, but
* it wants the return to be -protocol, or 0
*/
if (ret > 0)
return -ret;
return 0;
}
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
goto drop;
nf_reset(skb);
/* No socket. Drop packet silently, if checksum is wrong */
if (udp_lib_checksum_complete(skb))
goto csum_error;
UDP_INC_STATS_BH(UDP_MIB_NOPORTS, proto == IPPROTO_UDPLITE);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
/*
* Hmm. We got an UDP packet to a port to which we
* don't wanna listen. Ignore it.
*/
kfree_skb(skb);
return 0;
short_packet:
LIMIT_NETDEBUG(KERN_DEBUG "UDP%s: short packet: From %u.%u.%u.%u:%u %d/%d to %u.%u.%u.%u:%u\n",
proto == IPPROTO_UDPLITE ? "-Lite" : "",
NIPQUAD(saddr),
ntohs(uh->source),
ulen,
skb->len,
NIPQUAD(daddr),
ntohs(uh->dest));
goto drop;
csum_error:
/*
* RFC1122: OK. Discards the bad packet silently (as far as
* the network is concerned, anyway) as per 4.1.3.4 (MUST).
*/
LIMIT_NETDEBUG(KERN_DEBUG "UDP%s: bad checksum. From %d.%d.%d.%d:%d to %d.%d.%d.%d:%d ulen %d\n",
proto == IPPROTO_UDPLITE ? "-Lite" : "",
NIPQUAD(saddr),
ntohs(uh->source),
NIPQUAD(daddr),
ntohs(uh->dest),
ulen);
drop:
UDP_INC_STATS_BH(UDP_MIB_INERRORS, proto == IPPROTO_UDPLITE);
kfree_skb(skb);
return 0;
}
int udp_rcv(struct sk_buff *skb)
{
return __udp4_lib_rcv(skb, udp_hash, IPPROTO_UDP);
}
int udp_destroy_sock(struct sock *sk)
{
lock_sock(sk);
udp_flush_pending_frames(sk);
release_sock(sk);
return 0;
}
/*
* Socket option code for UDP
*/
int udp_lib_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int optlen,
int (*push_pending_frames)(struct sock *))
{
struct udp_sock *up = udp_sk(sk);
int val;
int err = 0;
int is_udplite = IS_UDPLITE(sk);
if (optlen<sizeof(int))
return -EINVAL;
if (get_user(val, (int __user *)optval))
return -EFAULT;
switch (optname) {
case UDP_CORK:
if (val != 0) {
up->corkflag = 1;
} else {
up->corkflag = 0;
lock_sock(sk);
(*push_pending_frames)(sk);
release_sock(sk);
}
break;
case UDP_ENCAP:
switch (val) {
case 0:
case UDP_ENCAP_ESPINUDP:
case UDP_ENCAP_ESPINUDP_NON_IKE:
up->encap_rcv = xfrm4_udp_encap_rcv;
/* FALLTHROUGH */
case UDP_ENCAP_L2TPINUDP:
up->encap_type = val;
break;
default:
err = -ENOPROTOOPT;
break;
}
break;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
/*
* UDP-Lite's partial checksum coverage (RFC 3828).
*/
/* The sender sets actual checksum coverage length via this option.
* The case coverage > packet length is handled by send module. */
case UDPLITE_SEND_CSCOV:
if (!is_udplite) /* Disable the option on UDP sockets */
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
return -ENOPROTOOPT;
if (val != 0 && val < 8) /* Illegal coverage: use default (8) */
val = 8;
up->pcslen = val;
up->pcflag |= UDPLITE_SEND_CC;
break;
/* The receiver specifies a minimum checksum coverage value. To make
* sense, this should be set to at least 8 (as done below). If zero is
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
* used, this again means full checksum coverage. */
case UDPLITE_RECV_CSCOV:
if (!is_udplite) /* Disable the option on UDP sockets */
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
return -ENOPROTOOPT;
if (val != 0 && val < 8) /* Avoid silly minimal values. */
val = 8;
up->pcrlen = val;
up->pcflag |= UDPLITE_RECV_CC;
break;
default:
err = -ENOPROTOOPT;
break;
}
return err;
}
int udp_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
udp_push_pending_frames);
return ip_setsockopt(sk, level, optname, optval, optlen);
}
#ifdef CONFIG_COMPAT
int compat_udp_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
udp_push_pending_frames);
return compat_ip_setsockopt(sk, level, optname, optval, optlen);
}
#endif
int udp_lib_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
struct udp_sock *up = udp_sk(sk);
int val, len;
if (get_user(len,optlen))
return -EFAULT;
len = min_t(unsigned int, len, sizeof(int));
if (len < 0)
return -EINVAL;
switch (optname) {
case UDP_CORK:
val = up->corkflag;
break;
case UDP_ENCAP:
val = up->encap_type;
break;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
/* The following two cannot be changed on UDP sockets, the return is
* always 0 (which corresponds to the full checksum coverage of UDP). */
case UDPLITE_SEND_CSCOV:
val = up->pcslen;
break;
case UDPLITE_RECV_CSCOV:
val = up->pcrlen;
break;
default:
return -ENOPROTOOPT;
}
if (put_user(len, optlen))
return -EFAULT;
if (copy_to_user(optval, &val,len))
return -EFAULT;
return 0;
}
int udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_getsockopt(sk, level, optname, optval, optlen);
return ip_getsockopt(sk, level, optname, optval, optlen);
}
#ifdef CONFIG_COMPAT
int compat_udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_getsockopt(sk, level, optname, optval, optlen);
return compat_ip_getsockopt(sk, level, optname, optval, optlen);
}
#endif
/**
* udp_poll - wait for a UDP event.
* @file - file struct
* @sock - socket
* @wait - poll table
*
* This is same as datagram poll, except for the special case of
* blocking sockets. If application is using a blocking fd
* and a packet with checksum error is in the queue;
* then it could get return from select indicating data available
* but then block when reading it. Add special case code
* to work around these arguably broken applications.
*/
unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait)
{
unsigned int mask = datagram_poll(file, sock, wait);
struct sock *sk = sock->sk;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
int is_lite = IS_UDPLITE(sk);
/* Check for false positives due to checksum errors */
if ( (mask & POLLRDNORM) &&
!(file->f_flags & O_NONBLOCK) &&
!(sk->sk_shutdown & RCV_SHUTDOWN)){
struct sk_buff_head *rcvq = &sk->sk_receive_queue;
struct sk_buff *skb;
spin_lock_bh(&rcvq->lock);
while ((skb = skb_peek(rcvq)) != NULL &&
udp_lib_checksum_complete(skb)) {
UDP_INC_STATS_BH(UDP_MIB_INERRORS, is_lite);
__skb_unlink(skb, rcvq);
kfree_skb(skb);
}
spin_unlock_bh(&rcvq->lock);
/* nothing to see, move along */
if (skb == NULL)
mask &= ~(POLLIN | POLLRDNORM);
}
return mask;
}
DEFINE_PROTO_INUSE(udp)
struct proto udp_prot = {
.name = "UDP",
.owner = THIS_MODULE,
.close = udp_lib_close,
.connect = ip4_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = udp_ioctl,
.destroy = udp_destroy_sock,
.setsockopt = udp_setsockopt,
.getsockopt = udp_getsockopt,
.sendmsg = udp_sendmsg,
.recvmsg = udp_recvmsg,
.sendpage = udp_sendpage,
.backlog_rcv = udp_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v4_get_port,
.memory_allocated = &udp_memory_allocated,
.sysctl_mem = sysctl_udp_mem,
.sysctl_wmem = &sysctl_udp_wmem_min,
.sysctl_rmem = &sysctl_udp_rmem_min,
.obj_size = sizeof(struct udp_sock),
.h.udp_hash = udp_hash,
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_udp_setsockopt,
.compat_getsockopt = compat_udp_getsockopt,
#endif
REF_PROTO_INUSE(udp)
};
/* ------------------------------------------------------------------------ */
#ifdef CONFIG_PROC_FS
static struct sock *udp_get_first(struct seq_file *seq)
{
struct sock *sk;
struct udp_iter_state *state = seq->private;
struct net *net = state->net;
for (state->bucket = 0; state->bucket < UDP_HTABLE_SIZE; ++state->bucket) {
struct hlist_node *node;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
sk_for_each(sk, node, state->hashtable + state->bucket) {
if (sk->sk_net != net)
continue;
if (sk->sk_family == state->family)
goto found;
}
}
sk = NULL;
found:
return sk;
}
static struct sock *udp_get_next(struct seq_file *seq, struct sock *sk)
{
struct udp_iter_state *state = seq->private;
struct net *net = state->net;
do {
sk = sk_next(sk);
try_again:
;
} while (sk && (sk->sk_net != net || sk->sk_family != state->family));
if (!sk && ++state->bucket < UDP_HTABLE_SIZE) {
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
sk = sk_head(state->hashtable + state->bucket);
goto try_again;
}
return sk;
}
static struct sock *udp_get_idx(struct seq_file *seq, loff_t pos)
{
struct sock *sk = udp_get_first(seq);
if (sk)
while (pos && (sk = udp_get_next(seq, sk)) != NULL)
--pos;
return pos ? NULL : sk;
}
static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(udp_hash_lock)
{
read_lock(&udp_hash_lock);
return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
}
static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct sock *sk;
if (v == (void *)1)
sk = udp_get_idx(seq, 0);
else
sk = udp_get_next(seq, v);
++*pos;
return sk;
}
static void udp_seq_stop(struct seq_file *seq, void *v)
__releases(udp_hash_lock)
{
read_unlock(&udp_hash_lock);
}
static int udp_seq_open(struct inode *inode, struct file *file)
{
struct udp_seq_afinfo *afinfo = PDE(inode)->data;
struct seq_file *seq;
struct net *net;
int rc = -ENOMEM;
struct udp_iter_state *s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s)
goto out;
rc = -ENXIO;
net = get_proc_net(inode);
if (!net)
goto out_kfree;
s->family = afinfo->family;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-27 12:10:57 -07:00
s->hashtable = afinfo->hashtable;
s->seq_ops.start = udp_seq_start;
s->seq_ops.next = udp_seq_next;
s->seq_ops.show = afinfo->seq_show;
s->seq_ops.stop = udp_seq_stop;
s->net = net;
rc = seq_open(file, &s->seq_ops);
if (rc)
goto out_put_net;
seq = file->private_data;
seq->private = s;
out:
return rc;
out_put_net:
put_net(net);
out_kfree:
kfree(s);
goto out;
}
static int udp_seq_release(struct inode *inode, struct file *file)
{
struct seq_file *seq = file->private_data;
struct udp_iter_state *s = seq->private;
put_net(s->net);
seq_release_private(inode, file);
return 0;
}
/* ------------------------------------------------------------------------ */
int udp_proc_register(struct net *net, struct udp_seq_afinfo *afinfo)
{
struct proc_dir_entry *p;
int rc = 0;
if (!afinfo)
return -EINVAL;
afinfo->seq_fops->owner = afinfo->owner;
afinfo->seq_fops->open = udp_seq_open;
afinfo->seq_fops->read = seq_read;
afinfo->seq_fops->llseek = seq_lseek;
afinfo->seq_fops->release = udp_seq_release;
p = proc_net_fops_create(net, afinfo->name, S_IRUGO, afinfo->seq_fops);
if (p)
p->data = afinfo;
else
rc = -ENOMEM;
return rc;
}
void udp_proc_unregister(struct net *net, struct udp_seq_afinfo *afinfo)
{
if (!afinfo)
return;
proc_net_remove(net, afinfo->name);
memset(afinfo->seq_fops, 0, sizeof(*afinfo->seq_fops));
}
/* ------------------------------------------------------------------------ */
static void udp4_format_sock(struct sock *sp, char *tmpbuf, int bucket)
{
struct inet_sock *inet = inet_sk(sp);
__be32 dest = inet->daddr;
__be32 src = inet->rcv_saddr;
__u16 destp = ntohs(inet->dport);
__u16 srcp = ntohs(inet->sport);
sprintf(tmpbuf, "%4d: %08X:%04X %08X:%04X"
" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p",
bucket, src, srcp, dest, destp, sp->sk_state,
atomic_read(&sp->sk_wmem_alloc),
atomic_read(&sp->sk_rmem_alloc),
0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
atomic_read(&sp->sk_refcnt), sp);
}
int udp4_seq_show(struct seq_file *seq, void *v)
{
if (v == SEQ_START_TOKEN)
seq_printf(seq, "%-127s\n",
" sl local_address rem_address st tx_queue "
"rx_queue tr tm->when retrnsmt uid timeout "
"inode");
else {
char tmpbuf[129];
struct udp_iter_state *state = seq->private;
udp4_format_sock(v, tmpbuf, state->bucket);
seq_printf(seq, "%-127s\n", tmpbuf);
}
return 0;
}
/* ------------------------------------------------------------------------ */
static struct file_operations udp4_seq_fops;
static struct udp_seq_afinfo udp4_seq_afinfo = {
.owner = THIS_MODULE,
.name = "udp",
.family = AF_INET,
.hashtable = udp_hash,
.seq_show = udp4_seq_show,
.seq_fops = &udp4_seq_fops,
};
static int udp4_proc_init_net(struct net *net)
{
return udp_proc_register(net, &udp4_seq_afinfo);
}
static void udp4_proc_exit_net(struct net *net)
{
udp_proc_unregister(net, &udp4_seq_afinfo);
}
static struct pernet_operations udp4_net_ops = {
.init = udp4_proc_init_net,
.exit = udp4_proc_exit_net,
};
int __init udp4_proc_init(void)
{
return register_pernet_subsys(&udp4_net_ops);
}
void udp4_proc_exit(void)
{
unregister_pernet_subsys(&udp4_net_ops);
}
#endif /* CONFIG_PROC_FS */
void __init udp_init(void)
{
unsigned long limit;
/* Set the pressure threshold up by the same strategy of TCP. It is a
* fraction of global memory that is up to 1/2 at 256 MB, decreasing
* toward zero with the amount of memory, with a floor of 128 pages.
*/
limit = min(nr_all_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
limit = (limit * (nr_all_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
limit = max(limit, 128UL);
sysctl_udp_mem[0] = limit / 4 * 3;
sysctl_udp_mem[1] = limit;
sysctl_udp_mem[2] = sysctl_udp_mem[0] * 2;
sysctl_udp_rmem_min = SK_MEM_QUANTUM;
sysctl_udp_wmem_min = SK_MEM_QUANTUM;
}
EXPORT_SYMBOL(udp_disconnect);
EXPORT_SYMBOL(udp_hash);
EXPORT_SYMBOL(udp_hash_lock);
EXPORT_SYMBOL(udp_ioctl);
EXPORT_SYMBOL(udp_prot);
EXPORT_SYMBOL(udp_sendmsg);
EXPORT_SYMBOL(udp_lib_getsockopt);
EXPORT_SYMBOL(udp_lib_setsockopt);
EXPORT_SYMBOL(udp_poll);
EXPORT_SYMBOL(udp_lib_get_port);
#ifdef CONFIG_PROC_FS
EXPORT_SYMBOL(udp_proc_register);
EXPORT_SYMBOL(udp_proc_unregister);
#endif