1
linux/drivers/net/wireless/iwlwifi/iwl-tx.c

1648 lines
47 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-sta.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
/*
* mac80211 queues, ACs, hardware queues, FIFOs.
*
* Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
*
* Mac80211 uses the following numbers, which we get as from it
* by way of skb_get_queue_mapping(skb):
*
* VO 0
* VI 1
* BE 2
* BK 3
*
*
* Regular (not A-MPDU) frames are put into hardware queues corresponding
* to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
* own queue per aggregation session (RA/TID combination), such queues are
* set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
* order to map frames to the right queue, we also need an AC->hw queue
* mapping. This is implemented here.
*
* Due to the way hw queues are set up (by the hw specific modules like
* iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
* mapping.
*/
static const u8 tid_to_ac[] = {
/* this matches the mac80211 numbers */
2, 3, 3, 2, 1, 1, 0, 0
};
static const u8 ac_to_fifo[] = {
IWL_TX_FIFO_VO,
IWL_TX_FIFO_VI,
IWL_TX_FIFO_BE,
IWL_TX_FIFO_BK,
};
static inline int get_fifo_from_ac(u8 ac)
{
return ac_to_fifo[ac];
}
static inline int get_queue_from_ac(u16 ac)
{
return ac;
}
static inline int get_fifo_from_tid(u16 tid)
{
if (likely(tid < ARRAY_SIZE(tid_to_ac)))
return get_fifo_from_ac(tid_to_ac[tid]);
/* no support for TIDs 8-15 yet */
return -EINVAL;
}
static inline int iwl_alloc_dma_ptr(struct iwl_priv *priv,
struct iwl_dma_ptr *ptr, size_t size)
{
ptr->addr = dma_alloc_coherent(&priv->pci_dev->dev, size, &ptr->dma,
GFP_KERNEL);
if (!ptr->addr)
return -ENOMEM;
ptr->size = size;
return 0;
}
static inline void iwl_free_dma_ptr(struct iwl_priv *priv,
struct iwl_dma_ptr *ptr)
{
if (unlikely(!ptr->addr))
return;
dma_free_coherent(&priv->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
memset(ptr, 0, sizeof(*ptr));
}
/**
* iwl_txq_update_write_ptr - Send new write index to hardware
*/
void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
{
u32 reg = 0;
int txq_id = txq->q.id;
if (txq->need_update == 0)
return;
/* if we're trying to save power */
if (test_bit(STATUS_POWER_PMI, &priv->status)) {
/* wake up nic if it's powered down ...
* uCode will wake up, and interrupt us again, so next
* time we'll skip this part. */
reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
txq_id, reg);
iwl_set_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
return;
}
iwl_write_direct32(priv, HBUS_TARG_WRPTR,
txq->q.write_ptr | (txq_id << 8));
/* else not in power-save mode, uCode will never sleep when we're
* trying to tx (during RFKILL, we're not trying to tx). */
} else
iwl_write32(priv, HBUS_TARG_WRPTR,
txq->q.write_ptr | (txq_id << 8));
txq->need_update = 0;
}
EXPORT_SYMBOL(iwl_txq_update_write_ptr);
void iwl_free_tfds_in_queue(struct iwl_priv *priv,
int sta_id, int tid, int freed)
{
if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
else {
IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n",
priv->stations[sta_id].tid[tid].tfds_in_queue,
freed);
priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
}
}
EXPORT_SYMBOL(iwl_free_tfds_in_queue);
/**
* iwl_tx_queue_free - Deallocate DMA queue.
* @txq: Transmit queue to deallocate.
*
* Empty queue by removing and destroying all BD's.
* Free all buffers.
* 0-fill, but do not free "txq" descriptor structure.
*/
void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
{
struct iwl_tx_queue *txq = &priv->txq[txq_id];
struct iwl_queue *q = &txq->q;
struct device *dev = &priv->pci_dev->dev;
int i;
if (q->n_bd == 0)
return;
/* first, empty all BD's */
for (; q->write_ptr != q->read_ptr;
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
/* De-alloc array of command/tx buffers */
for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
kfree(txq->cmd[i]);
/* De-alloc circular buffer of TFDs */
if (txq->q.n_bd)
dma_free_coherent(dev, priv->hw_params.tfd_size *
txq->q.n_bd, txq->tfds, txq->q.dma_addr);
/* De-alloc array of per-TFD driver data */
kfree(txq->txb);
txq->txb = NULL;
/* deallocate arrays */
kfree(txq->cmd);
kfree(txq->meta);
txq->cmd = NULL;
txq->meta = NULL;
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
EXPORT_SYMBOL(iwl_tx_queue_free);
/**
* iwl_cmd_queue_free - Deallocate DMA queue.
* @txq: Transmit queue to deallocate.
*
* Empty queue by removing and destroying all BD's.
* Free all buffers.
* 0-fill, but do not free "txq" descriptor structure.
*/
void iwl_cmd_queue_free(struct iwl_priv *priv)
{
struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
struct iwl_queue *q = &txq->q;
struct device *dev = &priv->pci_dev->dev;
int i;
if (q->n_bd == 0)
return;
/* De-alloc array of command/tx buffers */
for (i = 0; i <= TFD_CMD_SLOTS; i++)
kfree(txq->cmd[i]);
/* De-alloc circular buffer of TFDs */
if (txq->q.n_bd)
dma_free_coherent(dev, priv->hw_params.tfd_size * txq->q.n_bd,
txq->tfds, txq->q.dma_addr);
/* deallocate arrays */
kfree(txq->cmd);
kfree(txq->meta);
txq->cmd = NULL;
txq->meta = NULL;
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
EXPORT_SYMBOL(iwl_cmd_queue_free);
/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
* DMA services
*
* Theory of operation
*
* A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
* of buffer descriptors, each of which points to one or more data buffers for
* the device to read from or fill. Driver and device exchange status of each
* queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
* entries in each circular buffer, to protect against confusing empty and full
* queue states.
*
* The device reads or writes the data in the queues via the device's several
* DMA/FIFO channels. Each queue is mapped to a single DMA channel.
*
* For Tx queue, there are low mark and high mark limits. If, after queuing
* the packet for Tx, free space become < low mark, Tx queue stopped. When
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
* See more detailed info in iwl-4965-hw.h.
***************************************************/
int iwl_queue_space(const struct iwl_queue *q)
{
int s = q->read_ptr - q->write_ptr;
if (q->read_ptr > q->write_ptr)
s -= q->n_bd;
if (s <= 0)
s += q->n_window;
/* keep some reserve to not confuse empty and full situations */
s -= 2;
if (s < 0)
s = 0;
return s;
}
EXPORT_SYMBOL(iwl_queue_space);
/**
* iwl_queue_init - Initialize queue's high/low-water and read/write indexes
*/
static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
int count, int slots_num, u32 id)
{
q->n_bd = count;
q->n_window = slots_num;
q->id = id;
/* count must be power-of-two size, otherwise iwl_queue_inc_wrap
* and iwl_queue_dec_wrap are broken. */
BUG_ON(!is_power_of_2(count));
/* slots_num must be power-of-two size, otherwise
* get_cmd_index is broken. */
BUG_ON(!is_power_of_2(slots_num));
q->low_mark = q->n_window / 4;
if (q->low_mark < 4)
q->low_mark = 4;
q->high_mark = q->n_window / 8;
if (q->high_mark < 2)
q->high_mark = 2;
q->write_ptr = q->read_ptr = 0;
q->last_read_ptr = 0;
q->repeat_same_read_ptr = 0;
return 0;
}
/**
* iwl_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
*/
static int iwl_tx_queue_alloc(struct iwl_priv *priv,
struct iwl_tx_queue *txq, u32 id)
{
struct device *dev = &priv->pci_dev->dev;
size_t tfd_sz = priv->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX;
/* Driver private data, only for Tx (not command) queues,
* not shared with device. */
if (id != IWL_CMD_QUEUE_NUM) {
txq->txb = kmalloc(sizeof(txq->txb[0]) *
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
if (!txq->txb) {
IWL_ERR(priv, "kmalloc for auxiliary BD "
"structures failed\n");
goto error;
}
} else {
txq->txb = NULL;
}
/* Circular buffer of transmit frame descriptors (TFDs),
* shared with device */
txq->tfds = dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr,
GFP_KERNEL);
if (!txq->tfds) {
IWL_ERR(priv, "pci_alloc_consistent(%zd) failed\n", tfd_sz);
goto error;
}
txq->q.id = id;
return 0;
error:
kfree(txq->txb);
txq->txb = NULL;
return -ENOMEM;
}
/**
* iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
*/
int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
{
int i, len;
int ret;
int actual_slots = slots_num;
/*
* Alloc buffer array for commands (Tx or other types of commands).
* For the command queue (#4), allocate command space + one big
* command for scan, since scan command is very huge; the system will
* not have two scans at the same time, so only one is needed.
* For normal Tx queues (all other queues), no super-size command
* space is needed.
*/
if (txq_id == IWL_CMD_QUEUE_NUM)
actual_slots++;
txq->meta = kzalloc(sizeof(struct iwl_cmd_meta) * actual_slots,
GFP_KERNEL);
txq->cmd = kzalloc(sizeof(struct iwl_device_cmd *) * actual_slots,
GFP_KERNEL);
if (!txq->meta || !txq->cmd)
goto out_free_arrays;
len = sizeof(struct iwl_device_cmd);
for (i = 0; i < actual_slots; i++) {
/* only happens for cmd queue */
if (i == slots_num)
len = IWL_MAX_CMD_SIZE;
txq->cmd[i] = kmalloc(len, GFP_KERNEL);
if (!txq->cmd[i])
goto err;
}
/* Alloc driver data array and TFD circular buffer */
ret = iwl_tx_queue_alloc(priv, txq, txq_id);
if (ret)
goto err;
txq->need_update = 0;
/*
* Aggregation TX queues will get their ID when aggregation begins;
* they overwrite the setting done here. The command FIFO doesn't
* need an swq_id so don't set one to catch errors, all others can
* be set up to the identity mapping.
*/
if (txq_id != IWL_CMD_QUEUE_NUM)
txq->swq_id = txq_id;
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
* iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
/* Initialize queue's high/low-water marks, and head/tail indexes */
iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
/* Tell device where to find queue */
priv->cfg->ops->lib->txq_init(priv, txq);
return 0;
err:
for (i = 0; i < actual_slots; i++)
kfree(txq->cmd[i]);
out_free_arrays:
kfree(txq->meta);
kfree(txq->cmd);
return -ENOMEM;
}
EXPORT_SYMBOL(iwl_tx_queue_init);
/**
* iwl_hw_txq_ctx_free - Free TXQ Context
*
* Destroy all TX DMA queues and structures
*/
void iwl_hw_txq_ctx_free(struct iwl_priv *priv)
{
int txq_id;
/* Tx queues */
if (priv->txq) {
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
txq_id++)
if (txq_id == IWL_CMD_QUEUE_NUM)
iwl_cmd_queue_free(priv);
else
iwl_tx_queue_free(priv, txq_id);
}
iwl_free_dma_ptr(priv, &priv->kw);
iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
/* free tx queue structure */
iwl_free_txq_mem(priv);
}
EXPORT_SYMBOL(iwl_hw_txq_ctx_free);
/**
* iwl_txq_ctx_reset - Reset TX queue context
* Destroys all DMA structures and initialize them again
*
* @param priv
* @return error code
*/
int iwl_txq_ctx_reset(struct iwl_priv *priv)
{
int ret = 0;
int txq_id, slots_num;
unsigned long flags;
/* Free all tx/cmd queues and keep-warm buffer */
iwl_hw_txq_ctx_free(priv);
ret = iwl_alloc_dma_ptr(priv, &priv->scd_bc_tbls,
priv->hw_params.scd_bc_tbls_size);
if (ret) {
IWL_ERR(priv, "Scheduler BC Table allocation failed\n");
goto error_bc_tbls;
}
/* Alloc keep-warm buffer */
ret = iwl_alloc_dma_ptr(priv, &priv->kw, IWL_KW_SIZE);
if (ret) {
IWL_ERR(priv, "Keep Warm allocation failed\n");
goto error_kw;
}
/* allocate tx queue structure */
ret = iwl_alloc_txq_mem(priv);
if (ret)
goto error;
spin_lock_irqsave(&priv->lock, flags);
/* Turn off all Tx DMA fifos */
priv->cfg->ops->lib->txq_set_sched(priv, 0);
/* Tell NIC where to find the "keep warm" buffer */
iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma >> 4);
spin_unlock_irqrestore(&priv->lock, flags);
/* Alloc and init all Tx queues, including the command queue (#4) */
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
ret = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
txq_id);
if (ret) {
IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
goto error;
}
}
return ret;
error:
iwl_hw_txq_ctx_free(priv);
iwl_free_dma_ptr(priv, &priv->kw);
error_kw:
iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
error_bc_tbls:
return ret;
}
/**
* iwl_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory
*/
void iwl_txq_ctx_stop(struct iwl_priv *priv)
{
int ch;
unsigned long flags;
/* Turn off all Tx DMA fifos */
spin_lock_irqsave(&priv->lock, flags);
priv->cfg->ops->lib->txq_set_sched(priv, 0);
/* Stop each Tx DMA channel, and wait for it to be idle */
for (ch = 0; ch < priv->hw_params.dma_chnl_num; ch++) {
iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
1000);
}
spin_unlock_irqrestore(&priv->lock, flags);
/* Deallocate memory for all Tx queues */
iwl_hw_txq_ctx_free(priv);
}
EXPORT_SYMBOL(iwl_txq_ctx_stop);
/*
* handle build REPLY_TX command notification.
*/
static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr,
u8 std_id)
{
__le16 fc = hdr->frame_control;
__le32 tx_flags = tx_cmd->tx_flags;
tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
tx_flags |= TX_CMD_FLG_ACK_MSK;
if (ieee80211_is_mgmt(fc))
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
if (ieee80211_is_probe_resp(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & 0xf))
tx_flags |= TX_CMD_FLG_TSF_MSK;
} else {
tx_flags &= (~TX_CMD_FLG_ACK_MSK);
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
if (ieee80211_is_back_req(fc))
tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
tx_cmd->sta_id = std_id;
if (ieee80211_has_morefrags(fc))
tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
if (ieee80211_is_data_qos(fc)) {
u8 *qc = ieee80211_get_qos_ctl(hdr);
tx_cmd->tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
} else {
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags);
if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
if (ieee80211_is_mgmt(fc)) {
if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
else
tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
} else {
tx_cmd->timeout.pm_frame_timeout = 0;
}
tx_cmd->driver_txop = 0;
tx_cmd->tx_flags = tx_flags;
tx_cmd->next_frame_len = 0;
}
#define RTS_DFAULT_RETRY_LIMIT 60
static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
__le16 fc)
{
u32 rate_flags;
int rate_idx;
u8 rts_retry_limit;
u8 data_retry_limit;
u8 rate_plcp;
/* Set retry limit on DATA packets and Probe Responses*/
if (ieee80211_is_probe_resp(fc))
data_retry_limit = 3;
else
data_retry_limit = IWL_DEFAULT_TX_RETRY;
tx_cmd->data_retry_limit = data_retry_limit;
/* Set retry limit on RTS packets */
rts_retry_limit = RTS_DFAULT_RETRY_LIMIT;
if (data_retry_limit < rts_retry_limit)
rts_retry_limit = data_retry_limit;
tx_cmd->rts_retry_limit = rts_retry_limit;
/* DATA packets will use the uCode station table for rate/antenna
* selection */
if (ieee80211_is_data(fc)) {
tx_cmd->initial_rate_index = 0;
tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
return;
}
/**
* If the current TX rate stored in mac80211 has the MCS bit set, it's
* not really a TX rate. Thus, we use the lowest supported rate for
* this band. Also use the lowest supported rate if the stored rate
* index is invalid.
*/
rate_idx = info->control.rates[0].idx;
if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS ||
(rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY))
rate_idx = rate_lowest_index(&priv->bands[info->band],
info->control.sta);
/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
if (info->band == IEEE80211_BAND_5GHZ)
rate_idx += IWL_FIRST_OFDM_RATE;
/* Get PLCP rate for tx_cmd->rate_n_flags */
rate_plcp = iwl_rates[rate_idx].plcp;
/* Zero out flags for this packet */
rate_flags = 0;
/* Set CCK flag as needed */
if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
rate_flags |= RATE_MCS_CCK_MSK;
/* Set up RTS and CTS flags for certain packets */
switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
case cpu_to_le16(IEEE80211_STYPE_AUTH):
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) {
tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK;
}
break;
default:
break;
}
/* Set up antennas */
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
/* Set the rate in the TX cmd */
tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags);
}
static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
struct iwl_tx_cmd *tx_cmd,
struct sk_buff *skb_frag,
int sta_id)
{
struct ieee80211_key_conf *keyconf = info->control.hw_key;
switch (keyconf->alg) {
case ALG_CCMP:
tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
if (info->flags & IEEE80211_TX_CTL_AMPDU)
tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
break;
case ALG_TKIP:
tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
ieee80211_get_tkip_key(keyconf, skb_frag,
IEEE80211_TKIP_P2_KEY, tx_cmd->key);
IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n");
break;
case ALG_WEP:
tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP |
(keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT);
if (keyconf->keylen == WEP_KEY_LEN_128)
tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
"with key %d\n", keyconf->keyidx);
break;
default:
IWL_ERR(priv, "Unknown encode alg %d\n", keyconf->alg);
break;
}
}
/*
* start REPLY_TX command process
*/
int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sta *sta = info->control.sta;
struct iwl_station_priv *sta_priv = NULL;
struct iwl_tx_queue *txq;
struct iwl_queue *q;
struct iwl_device_cmd *out_cmd;
struct iwl_cmd_meta *out_meta;
struct iwl_tx_cmd *tx_cmd;
int swq_id, txq_id;
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
dma_addr_t scratch_phys;
u16 len, len_org, firstlen, secondlen;
u16 seq_number = 0;
__le16 fc;
u8 hdr_len;
u8 sta_id;
u8 wait_write_ptr = 0;
u8 tid = 0;
u8 *qc = NULL;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
goto drop_unlock;
}
fc = hdr->frame_control;
#ifdef CONFIG_IWLWIFI_DEBUG
if (ieee80211_is_auth(fc))
IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
else if (ieee80211_is_assoc_req(fc))
IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
else if (ieee80211_is_reassoc_req(fc))
IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
#endif
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
if (info->flags & IEEE80211_TX_CTL_INJECTED)
sta_id = priv->hw_params.bcast_sta_id;
else
sta_id = iwl_get_sta_id(priv, hdr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
iwlwifi: fix TX queue race I had a problem on 4965 hardware (well, probably other hardware too, but others don't survive my stress testing right now, unfortunately) where the driver was sending invalid commands to the device, but no such thing could be seen from the driver's point of view. I could reproduce this fairly easily by sending multiple TCP streams with iperf on different TIDs, though sometimes a single iperf stream was sufficient. It even happened with a single core, but I have forced preemption turned on. The culprit was a queue overrun, where we advanced the queue's write pointer over the read pointer. After careful analysis I've come to the conclusion that the cause is a race condition between iwlwifi and mac80211. mac80211, of course, checks whether the queue is stopped, before transmitting a frame. This effectively looks like this: lock(queues) if (stopped(queue)) { unlock(queues) return busy; } unlock(queues) ... <-- this place will be important there is some more code here drv_tx(frame) The driver, on the other hand, can stop and start queues, which does lock(queues) mark_running/stopped(queue) unlock(queues) [if marked running: wake up tasklet to send pending frames] Now, however, once the driver starts the queue, mac80211 can see that and end up at the marked place above, at which point for some reason the driver seems to stop the queue again (I don't understand that) and then we end up transmitting while the queue is actually full. Now, this shouldn't actually matter much, but for some reason I've seen it happen multiple times in a row and the queue actually overflows, at which point the queue bites itself in the tail and things go completely wrong. This patch fixes this by just dropping the packet should this have happened, and making the lock in iwlwifi cover everything so iwlwifi can't race against itself (dropping the lock there might make it more likely, but it did seem to happen without that too). Since we can't hold the lock across drv_tx() above, I see no way to fix this in mac80211, but I also don't understand why I haven't seen this before -- maybe I just never stress tested it this badly. With this patch, the device has survived many minutes of simultanously sending two iperf streams on different TIDs with combined throughput of about 60 Mbps. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24 11:13:14 -07:00
goto drop_unlock;
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
if (sta)
sta_priv = (void *)sta->drv_priv;
if (sta_priv && sta_id != priv->hw_params.bcast_sta_id &&
sta_priv->asleep) {
WARN_ON(!(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE));
/*
* This sends an asynchronous command to the device,
* but we can rely on it being processed before the
* next frame is processed -- and the next frame to
* this station is the one that will consume this
* counter.
* For now set the counter to just 1 since we do not
* support uAPSD yet.
*/
iwl_sta_modify_sleep_tx_count(priv, sta_id, 1);
}
txq_id = get_queue_from_ac(skb_get_queue_mapping(skb));
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
if (unlikely(tid >= MAX_TID_COUNT))
goto drop_unlock;
seq_number = priv->stations[sta_id].tid[tid].seq_number;
seq_number &= IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = hdr->seq_ctrl &
cpu_to_le16(IEEE80211_SCTL_FRAG);
hdr->seq_ctrl |= cpu_to_le16(seq_number);
seq_number += 0x10;
/* aggregation is on for this <sta,tid> */
if (info->flags & IEEE80211_TX_CTL_AMPDU &&
priv->stations[sta_id].tid[tid].agg.state == IWL_AGG_ON) {
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
}
}
txq = &priv->txq[txq_id];
swq_id = txq->swq_id;
q = &txq->q;
iwlwifi: fix TX queue race I had a problem on 4965 hardware (well, probably other hardware too, but others don't survive my stress testing right now, unfortunately) where the driver was sending invalid commands to the device, but no such thing could be seen from the driver's point of view. I could reproduce this fairly easily by sending multiple TCP streams with iperf on different TIDs, though sometimes a single iperf stream was sufficient. It even happened with a single core, but I have forced preemption turned on. The culprit was a queue overrun, where we advanced the queue's write pointer over the read pointer. After careful analysis I've come to the conclusion that the cause is a race condition between iwlwifi and mac80211. mac80211, of course, checks whether the queue is stopped, before transmitting a frame. This effectively looks like this: lock(queues) if (stopped(queue)) { unlock(queues) return busy; } unlock(queues) ... <-- this place will be important there is some more code here drv_tx(frame) The driver, on the other hand, can stop and start queues, which does lock(queues) mark_running/stopped(queue) unlock(queues) [if marked running: wake up tasklet to send pending frames] Now, however, once the driver starts the queue, mac80211 can see that and end up at the marked place above, at which point for some reason the driver seems to stop the queue again (I don't understand that) and then we end up transmitting while the queue is actually full. Now, this shouldn't actually matter much, but for some reason I've seen it happen multiple times in a row and the queue actually overflows, at which point the queue bites itself in the tail and things go completely wrong. This patch fixes this by just dropping the packet should this have happened, and making the lock in iwlwifi cover everything so iwlwifi can't race against itself (dropping the lock there might make it more likely, but it did seem to happen without that too). Since we can't hold the lock across drv_tx() above, I see no way to fix this in mac80211, but I also don't understand why I haven't seen this before -- maybe I just never stress tested it this badly. With this patch, the device has survived many minutes of simultanously sending two iperf streams on different TIDs with combined throughput of about 60 Mbps. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24 11:13:14 -07:00
if (unlikely(iwl_queue_space(q) < q->high_mark))
goto drop_unlock;
if (ieee80211_is_data_qos(fc))
priv->stations[sta_id].tid[tid].tfds_in_queue++;
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
txq->txb[q->write_ptr].skb[0] = skb;
/* Set up first empty entry in queue's array of Tx/cmd buffers */
out_cmd = txq->cmd[q->write_ptr];
out_meta = &txq->meta[q->write_ptr];
tx_cmd = &out_cmd->cmd.tx;
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd));
/*
* Set up the Tx-command (not MAC!) header.
* Store the chosen Tx queue and TFD index within the sequence field;
* after Tx, uCode's Tx response will return this value so driver can
* locate the frame within the tx queue and do post-tx processing.
*/
out_cmd->hdr.cmd = REPLY_TX;
out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
/* Total # bytes to be transmitted */
len = (u16)skb->len;
tx_cmd->len = cpu_to_le16(len);
if (info->control.hw_key)
iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
/* TODO need this for burst mode later on */
iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
iwl_dbg_log_tx_data_frame(priv, len, hdr);
iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc);
iwl_update_stats(priv, true, fc, len);
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
* (payload data will be in another buffer).
* Size of this varies, due to varying MAC header length.
* If end is not dword aligned, we'll have 2 extra bytes at the end
* of the MAC header (device reads on dword boundaries).
* We'll tell device about this padding later.
*/
len = sizeof(struct iwl_tx_cmd) +
sizeof(struct iwl_cmd_header) + hdr_len;
len_org = len;
firstlen = len = (len + 3) & ~3;
if (len_org != len)
len_org = 1;
else
len_org = 0;
/* Tell NIC about any 2-byte padding after MAC header */
if (len_org)
tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev,
&out_cmd->hdr, len,
PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(out_meta, mapping, txcmd_phys);
pci_unmap_len_set(out_meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
if (qc)
priv->stations[sta_id].tid[tid].seq_number = seq_number;
} else {
wait_write_ptr = 1;
txq->need_update = 0;
}
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
secondlen = len = skb->len - hdr_len;
if (len) {
phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
len, PCI_DMA_TODEVICE);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
phys_addr, len,
0, 0);
}
scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
offsetof(struct iwl_tx_cmd, scratch);
len = sizeof(struct iwl_tx_cmd) +
sizeof(struct iwl_cmd_header) + hdr_len;
/* take back ownership of DMA buffer to enable update */
pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys,
len, PCI_DMA_BIDIRECTIONAL);
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
if (info->flags & IEEE80211_TX_CTL_AMPDU)
priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
le16_to_cpu(tx_cmd->len));
pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
len, PCI_DMA_BIDIRECTIONAL);
trace_iwlwifi_dev_tx(priv,
&((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr],
sizeof(struct iwl_tfd),
&out_cmd->hdr, firstlen,
skb->data + hdr_len, secondlen);
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
iwl_txq_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->lock, flags);
/*
* At this point the frame is "transmitted" successfully
* and we will get a TX status notification eventually,
* regardless of the value of ret. "ret" only indicates
* whether or not we should update the write pointer.
*/
/* avoid atomic ops if it isn't an associated client */
if (sta_priv && sta_priv->client)
atomic_inc(&sta_priv->pending_frames);
if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) {
if (wait_write_ptr) {
spin_lock_irqsave(&priv->lock, flags);
txq->need_update = 1;
iwl_txq_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->lock, flags);
} else {
iwl_stop_queue(priv, txq->swq_id);
}
}
return 0;
drop_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
return -1;
}
EXPORT_SYMBOL(iwl_tx_skb);
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
/**
* iwl_enqueue_hcmd - enqueue a uCode command
* @priv: device private data point
* @cmd: a point to the ucode command structure
*
* The function returns < 0 values to indicate the operation is
* failed. On success, it turns the index (> 0) of command in the
* command queue.
*/
int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
struct iwl_queue *q = &txq->q;
struct iwl_device_cmd *out_cmd;
struct iwl_cmd_meta *out_meta;
dma_addr_t phys_addr;
unsigned long flags;
int len;
u32 idx;
u16 fix_size;
cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
/* If any of the command structures end up being larger than
* the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
* we will need to increase the size of the TFD entries
* Also, check to see if command buffer should not exceed the size
* of device_cmd and max_cmd_size. */
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
!(cmd->flags & CMD_SIZE_HUGE));
BUG_ON(fix_size > IWL_MAX_CMD_SIZE);
iwlwifi: reliable entering of critical temperature state When uCode detects critical temperature it should send "card state notification" interrupt to driver and then shut itself down to prevent overheating. There is a race condition where uCode shuts down before it can deliver the interrupt to driver. Additional method provided here for driver to enter CT_KILL state based on temperature reading. How it works: Method 1: If driver receive "card state notification" interrupt from uCode; it enters "CT_KILL" state immediately Method 2: If the last temperature report by Card reach Critical temperature, driver will send "statistic notification" request to uCode to verify the temperature reading, if driver can not get reply from uCode within 300ms, driver will enter CT_KILL state automatically. Method 3: If the last temperature report by Card did not reach Critical temperature, but uCode already shut down due to critical temperature. All the host commands send to uCode will not get process by uCode; when command queue reach the limit, driver will check the last reported temperature reading, if it is within pre-defined margin, enter "CT_KILL" state immediately. In this case, when uCode ready to exit from "CT_KILL" state, driver need to restart the adapter in order to reset all the queues and resume normal operation. One additional issue being address here, when system is in CT_KILL state, both tx and rx already stopped, but driver still can send host command to uCode, it will flood the command queue since card was not responding; adding STATUS_CT_KILL flag to reject enqueue host commands to uCode if it is in CT_KILL state, when uCode is ready to come out of CT_KILL, driver will clear the STATUS_CT_KILL bit and allow enqueue the host commands to uCode to recover from CT_KILL state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-02 13:43:58 -07:00
if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
IWL_WARN(priv, "Not sending command - %s KILL\n",
iwl_is_rfkill(priv) ? "RF" : "CT");
return -EIO;
}
if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERR(priv, "No space in command queue\n");
iwlwifi: reliable entering of critical temperature state When uCode detects critical temperature it should send "card state notification" interrupt to driver and then shut itself down to prevent overheating. There is a race condition where uCode shuts down before it can deliver the interrupt to driver. Additional method provided here for driver to enter CT_KILL state based on temperature reading. How it works: Method 1: If driver receive "card state notification" interrupt from uCode; it enters "CT_KILL" state immediately Method 2: If the last temperature report by Card reach Critical temperature, driver will send "statistic notification" request to uCode to verify the temperature reading, if driver can not get reply from uCode within 300ms, driver will enter CT_KILL state automatically. Method 3: If the last temperature report by Card did not reach Critical temperature, but uCode already shut down due to critical temperature. All the host commands send to uCode will not get process by uCode; when command queue reach the limit, driver will check the last reported temperature reading, if it is within pre-defined margin, enter "CT_KILL" state immediately. In this case, when uCode ready to exit from "CT_KILL" state, driver need to restart the adapter in order to reset all the queues and resume normal operation. One additional issue being address here, when system is in CT_KILL state, both tx and rx already stopped, but driver still can send host command to uCode, it will flood the command queue since card was not responding; adding STATUS_CT_KILL flag to reject enqueue host commands to uCode if it is in CT_KILL state, when uCode is ready to come out of CT_KILL, driver will clear the STATUS_CT_KILL bit and allow enqueue the host commands to uCode to recover from CT_KILL state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-02 13:43:58 -07:00
if (iwl_within_ct_kill_margin(priv))
iwl_tt_enter_ct_kill(priv);
else {
IWL_ERR(priv, "Restarting adapter due to queue full\n");
queue_work(priv->workqueue, &priv->restart);
}
return -ENOSPC;
}
spin_lock_irqsave(&priv->hcmd_lock, flags);
idx = get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
out_cmd = txq->cmd[idx];
out_meta = &txq->meta[idx];
memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
out_meta->flags = cmd->flags;
if (cmd->flags & CMD_WANT_SKB)
out_meta->source = cmd;
if (cmd->flags & CMD_ASYNC)
out_meta->callback = cmd->callback;
out_cmd->hdr.cmd = cmd->id;
memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
/* At this point, the out_cmd now has all of the incoming cmd
* information */
out_cmd->hdr.flags = 0;
out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
INDEX_TO_SEQ(q->write_ptr));
if (cmd->flags & CMD_SIZE_HUGE)
out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
len = sizeof(struct iwl_device_cmd);
if (idx == TFD_CMD_SLOTS)
len = IWL_MAX_CMD_SIZE;
#ifdef CONFIG_IWLWIFI_DEBUG
switch (out_cmd->hdr.cmd) {
case REPLY_TX_LINK_QUALITY_CMD:
case SENSITIVITY_CMD:
IWL_DEBUG_HC_DUMP(priv, "Sending command %s (#%x), seq: 0x%04X, "
"%d bytes at %d[%d]:%d\n",
get_cmd_string(out_cmd->hdr.cmd),
out_cmd->hdr.cmd,
le16_to_cpu(out_cmd->hdr.sequence), fix_size,
q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
break;
default:
IWL_DEBUG_HC(priv, "Sending command %s (#%x), seq: 0x%04X, "
"%d bytes at %d[%d]:%d\n",
get_cmd_string(out_cmd->hdr.cmd),
out_cmd->hdr.cmd,
le16_to_cpu(out_cmd->hdr.sequence), fix_size,
q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
}
#endif
txq->need_update = 1;
if (priv->cfg->ops->lib->txq_update_byte_cnt_tbl)
/* Set up entry in queue's byte count circular buffer */
priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
fix_size, PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(out_meta, mapping, phys_addr);
pci_unmap_len_set(out_meta, len, fix_size);
trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
phys_addr, fix_size, 1,
U32_PAD(cmd->len));
/* Increment and update queue's write index */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
iwl_txq_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->hcmd_lock, flags);
return idx;
}
static void iwl_tx_status(struct iwl_priv *priv, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_sta *sta;
struct iwl_station_priv *sta_priv;
sta = ieee80211_find_sta(priv->vif, hdr->addr1);
if (sta) {
sta_priv = (void *)sta->drv_priv;
/* avoid atomic ops if this isn't a client */
if (sta_priv->client &&
atomic_dec_return(&sta_priv->pending_frames) == 0)
ieee80211_sta_block_awake(priv->hw, sta, false);
}
ieee80211_tx_status_irqsafe(priv->hw, skb);
}
int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
{
struct iwl_tx_queue *txq = &priv->txq[txq_id];
struct iwl_queue *q = &txq->q;
struct iwl_tx_info *tx_info;
int nfreed = 0;
struct ieee80211_hdr *hdr;
if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
"is out of range [0-%d] %d %d.\n", txq_id,
index, q->n_bd, q->write_ptr, q->read_ptr);
return 0;
}
for (index = iwl_queue_inc_wrap(index, q->n_bd);
q->read_ptr != index;
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
tx_info = &txq->txb[txq->q.read_ptr];
iwl_tx_status(priv, tx_info->skb[0]);
hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
if (hdr && ieee80211_is_data_qos(hdr->frame_control))
nfreed++;
tx_info->skb[0] = NULL;
if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
}
return nfreed;
}
EXPORT_SYMBOL(iwl_tx_queue_reclaim);
/**
* iwl_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd
*
* When FW advances 'R' index, all entries between old and new 'R' index
* need to be reclaimed. As result, some free space forms. If there is
* enough free space (> low mark), wake the stack that feeds us.
*/
static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id,
int idx, int cmd_idx)
{
struct iwl_tx_queue *txq = &priv->txq[txq_id];
struct iwl_queue *q = &txq->q;
int nfreed = 0;
if ((idx >= q->n_bd) || (iwl_queue_used(q, idx) == 0)) {
IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
"is out of range [0-%d] %d %d.\n", txq_id,
idx, q->n_bd, q->write_ptr, q->read_ptr);
return;
}
for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
if (nfreed++ > 0) {
IWL_ERR(priv, "HCMD skipped: index (%d) %d %d\n", idx,
q->write_ptr, q->read_ptr);
queue_work(priv->workqueue, &priv->restart);
}
}
}
/**
* iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
* @rxb: Rx buffer to reclaim
*
* If an Rx buffer has an async callback associated with it the callback
* will be executed. The attached skb (if present) will only be freed
* if the callback returns 1
*/
void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
int txq_id = SEQ_TO_QUEUE(sequence);
int index = SEQ_TO_INDEX(sequence);
int cmd_index;
bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
struct iwl_device_cmd *cmd;
struct iwl_cmd_meta *meta;
/* If a Tx command is being handled and it isn't in the actual
* command queue then there a command routing bug has been introduced
* in the queue management code. */
if (WARN(txq_id != IWL_CMD_QUEUE_NUM,
"wrong command queue %d, sequence 0x%X readp=%d writep=%d\n",
txq_id, sequence,
priv->txq[IWL_CMD_QUEUE_NUM].q.read_ptr,
priv->txq[IWL_CMD_QUEUE_NUM].q.write_ptr)) {
iwl_print_hex_error(priv, pkt, 32);
return;
}
cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index];
pci_unmap_single(priv->pci_dev,
pci_unmap_addr(meta, mapping),
pci_unmap_len(meta, len),
PCI_DMA_BIDIRECTIONAL);
/* Input error checking is done when commands are added to queue. */
if (meta->flags & CMD_WANT_SKB) {
meta->source->reply_page = (unsigned long)rxb_addr(rxb);
rxb->page = NULL;
} else if (meta->callback)
meta->callback(priv, cmd, pkt);
iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
if (!(meta->flags & CMD_ASYNC)) {
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
get_cmd_string(cmd->hdr.cmd));
wake_up_interruptible(&priv->wait_command_queue);
}
}
EXPORT_SYMBOL(iwl_tx_cmd_complete);
/*
* Find first available (lowest unused) Tx Queue, mark it "active".
* Called only when finding queue for aggregation.
* Should never return anything < 7, because they should already
* be in use as EDCA AC (0-3), Command (4), reserved (5, 6)
*/
static int iwl_txq_ctx_activate_free(struct iwl_priv *priv)
{
int txq_id;
for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk))
return txq_id;
return -1;
}
int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
{
int sta_id;
int tx_fifo;
int txq_id;
int ret;
unsigned long flags;
struct iwl_tid_data *tid_data;
tx_fifo = get_fifo_from_tid(tid);
if (unlikely(tx_fifo < 0))
return tx_fifo;
IWL_WARN(priv, "%s on ra = %pM tid = %d\n",
__func__, ra, tid);
sta_id = iwl_find_station(priv, ra);
if (sta_id == IWL_INVALID_STATION) {
IWL_ERR(priv, "Start AGG on invalid station\n");
return -ENXIO;
}
if (unlikely(tid >= MAX_TID_COUNT))
return -EINVAL;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
return -ENXIO;
}
txq_id = iwl_txq_ctx_activate_free(priv);
if (txq_id == -1) {
IWL_ERR(priv, "No free aggregation queue available\n");
return -ENXIO;
}
spin_lock_irqsave(&priv->sta_lock, flags);
tid_data = &priv->stations[sta_id].tid[tid];
*ssn = SEQ_TO_SN(tid_data->seq_number);
tid_data->agg.txq_id = txq_id;
priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(tx_fifo, txq_id);
spin_unlock_irqrestore(&priv->sta_lock, flags);
ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,
sta_id, tid, *ssn);
if (ret)
return ret;
if (tid_data->tfds_in_queue == 0) {
IWL_DEBUG_HT(priv, "HW queue is empty\n");
tid_data->agg.state = IWL_AGG_ON;
ieee80211_start_tx_ba_cb_irqsafe(priv->vif, ra, tid);
} else {
IWL_DEBUG_HT(priv, "HW queue is NOT empty: %d packets in HW queue\n",
tid_data->tfds_in_queue);
tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA;
}
return ret;
}
EXPORT_SYMBOL(iwl_tx_agg_start);
int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
{
int tx_fifo_id, txq_id, sta_id, ssn = -1;
struct iwl_tid_data *tid_data;
int write_ptr, read_ptr;
unsigned long flags;
if (!ra) {
IWL_ERR(priv, "ra = NULL\n");
return -EINVAL;
}
tx_fifo_id = get_fifo_from_tid(tid);
if (unlikely(tx_fifo_id < 0))
return tx_fifo_id;
sta_id = iwl_find_station(priv, ra);
if (sta_id == IWL_INVALID_STATION) {
IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid);
return -ENXIO;
}
mac80211: fix spurious delBA handling Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky <ron.rindjunsky@intel.com> Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-22 04:28:41 -07:00
if (priv->stations[sta_id].tid[tid].agg.state ==
IWL_EMPTYING_HW_QUEUE_ADDBA) {
IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
mac80211: fix spurious delBA handling Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky <ron.rindjunsky@intel.com> Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-22 04:28:41 -07:00
priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
return 0;
}
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
mac80211: fix spurious delBA handling Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky <ron.rindjunsky@intel.com> Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-22 04:28:41 -07:00
IWL_WARN(priv, "Stopping AGG while state not ON or starting\n");
tid_data = &priv->stations[sta_id].tid[tid];
ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
txq_id = tid_data->agg.txq_id;
write_ptr = priv->txq[txq_id].q.write_ptr;
read_ptr = priv->txq[txq_id].q.read_ptr;
/* The queue is not empty */
if (write_ptr != read_ptr) {
IWL_DEBUG_HT(priv, "Stopping a non empty AGG HW QUEUE\n");
priv->stations[sta_id].tid[tid].agg.state =
IWL_EMPTYING_HW_QUEUE_DELBA;
return 0;
}
IWL_DEBUG_HT(priv, "HW queue is empty\n");
priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
spin_lock_irqsave(&priv->lock, flags);
/*
* the only reason this call can fail is queue number out of range,
* which can happen if uCode is reloaded and all the station
* information are lost. if it is outside the range, there is no need
* to deactivate the uCode queue, just return "success" to allow
* mac80211 to clean up it own data.
*/
priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn,
tx_fifo_id);
spin_unlock_irqrestore(&priv->lock, flags);
ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
return 0;
}
EXPORT_SYMBOL(iwl_tx_agg_stop);
int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id)
{
struct iwl_queue *q = &priv->txq[txq_id].q;
u8 *addr = priv->stations[sta_id].sta.sta.addr;
struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid];
switch (priv->stations[sta_id].tid[tid].agg.state) {
case IWL_EMPTYING_HW_QUEUE_DELBA:
/* We are reclaiming the last packet of the */
/* aggregated HW queue */
if ((txq_id == tid_data->agg.txq_id) &&
(q->read_ptr == q->write_ptr)) {
u16 ssn = SEQ_TO_SN(tid_data->seq_number);
int tx_fifo = get_fifo_from_tid(tid);
IWL_DEBUG_HT(priv, "HW queue empty: continue DELBA flow\n");
priv->cfg->ops->lib->txq_agg_disable(priv, txq_id,
ssn, tx_fifo);
tid_data->agg.state = IWL_AGG_OFF;
ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, addr, tid);
}
break;
case IWL_EMPTYING_HW_QUEUE_ADDBA:
/* We are reclaiming the last packet of the queue */
if (tid_data->tfds_in_queue == 0) {
IWL_DEBUG_HT(priv, "HW queue empty: continue ADDBA flow\n");
tid_data->agg.state = IWL_AGG_ON;
ieee80211_start_tx_ba_cb_irqsafe(priv->vif, addr, tid);
}
break;
}
return 0;
}
EXPORT_SYMBOL(iwl_txq_check_empty);
/**
* iwl_tx_status_reply_compressed_ba - Update tx status from block-ack
*
* Go through block-ack's bitmap of ACK'd frames, update driver's record of
* ACK vs. not. This gets sent to mac80211, then to rate scaling algo.
*/
static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_ht_agg *agg,
struct iwl_compressed_ba_resp *ba_resp)
{
int i, sh, ack;
u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
u64 bitmap;
int successes = 0;
struct ieee80211_tx_info *info;
if (unlikely(!agg->wait_for_ba)) {
IWL_ERR(priv, "Received BA when not expected\n");
return -EINVAL;
}
/* Mark that the expected block-ack response arrived */
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY(priv, "BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
/* Calculate shift to align block-ack bits with our Tx window bits */
sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4);
if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64-bit values for now */
bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
if (agg->frame_count > (64 - sh)) {
IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
return -1;
}
/* check for success or failure according to the
* transmitted bitmap and block-ack bitmap */
bitmap &= agg->bitmap;
/* For each frame attempted in aggregation,
* update driver's record of tx frame's status. */
for (i = 0; i < agg->frame_count ; i++) {
ack = bitmap & (1ULL << i);
successes += !!ack;
IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
ack ? "ACK" : "NACK", i, (agg->start_idx + i) & 0xff,
agg->start_idx + i);
}
info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb[0]);
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
info->flags |= IEEE80211_TX_STAT_AMPDU;
info->status.ampdu_ack_map = successes;
info->status.ampdu_ack_len = agg->frame_count;
iwl_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap);
return 0;
}
/**
* iwl_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA
*
* Handles block-acknowledge notification from device, which reports success
* of frames sent via aggregation.
*/
void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
struct iwl_tx_queue *txq = NULL;
struct iwl_ht_agg *agg;
int index;
int sta_id;
int tid;
/* "flow" corresponds to Tx queue */
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
/* "ssn" is start of block-ack Tx window, corresponds to index
* (in Tx queue's circular buffer) of first TFD/frame in window */
u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
if (scd_flow >= priv->hw_params.max_txq_num) {
IWL_ERR(priv,
"BUG_ON scd_flow is bigger than number of queues\n");
return;
}
txq = &priv->txq[scd_flow];
sta_id = ba_resp->sta_id;
tid = ba_resp->tid;
agg = &priv->stations[sta_id].tid[tid].agg;
/* Find index just before block-ack window */
index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
/* TODO: Need to get this copy more safely - now good for debug */
IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, "
"sta_id = %d\n",
agg->wait_for_ba,
(u8 *) &ba_resp->sta_addr_lo32,
ba_resp->sta_id);
IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = "
"%d, scd_ssn = %d\n",
ba_resp->tid,
ba_resp->seq_ctl,
(unsigned long long)le64_to_cpu(ba_resp->bitmap),
ba_resp->scd_flow,
ba_resp->scd_ssn);
IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n",
agg->start_idx,
(unsigned long long)agg->bitmap);
/* Update driver's record of ACK vs. not for each frame in window */
iwl_tx_status_reply_compressed_ba(priv, agg, ba_resp);
/* Release all TFDs before the SSN, i.e. all TFDs in front of
* block-ack window (we assume that they've been successfully
* transmitted ... if not, it's too late anyway). */
if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
/* calculate mac80211 ampdu sw queue to wake */
int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
priv->mac80211_registered &&
(agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
iwl_wake_queue(priv, txq->swq_id);
iwl_txq_check_empty(priv, sta_id, tid, scd_flow);
}
}
EXPORT_SYMBOL(iwl_rx_reply_compressed_ba);
#ifdef CONFIG_IWLWIFI_DEBUG
#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
const char *iwl_get_tx_fail_reason(u32 status)
{
switch (status & TX_STATUS_MSK) {
case TX_STATUS_SUCCESS:
return "SUCCESS";
TX_STATUS_ENTRY(SHORT_LIMIT);
TX_STATUS_ENTRY(LONG_LIMIT);
TX_STATUS_ENTRY(FIFO_UNDERRUN);
TX_STATUS_ENTRY(MGMNT_ABORT);
TX_STATUS_ENTRY(NEXT_FRAG);
TX_STATUS_ENTRY(LIFE_EXPIRE);
TX_STATUS_ENTRY(DEST_PS);
TX_STATUS_ENTRY(ABORTED);
TX_STATUS_ENTRY(BT_RETRY);
TX_STATUS_ENTRY(STA_INVALID);
TX_STATUS_ENTRY(FRAG_DROPPED);
TX_STATUS_ENTRY(TID_DISABLE);
TX_STATUS_ENTRY(FRAME_FLUSHED);
TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
TX_STATUS_ENTRY(TX_LOCKED);
TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
}
return "UNKNOWN";
}
EXPORT_SYMBOL(iwl_get_tx_fail_reason);
#endif /* CONFIG_IWLWIFI_DEBUG */