kevin/linux
1
Fork 0
Code
67cd080c50
linux/crypto/authenc.c

492 lines
13 KiB
C
Raw Normal View History

[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
/*
* Authenc: Simple AEAD wrapper for IPsec
*
* Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
*/
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
#include <crypto/aead.h>
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
#include <crypto/internal/skcipher.h>
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
#include <crypto/authenc.h>
[CRYPTO] scatterwalk: Move scatterwalk.h to linux/crypto The scatterwalk infrastructure is used by algorithms so it needs to move out of crypto for future users that may live in drivers/crypto or asm/*/crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-07 03:52:49 -07:00
#include <crypto/scatterwalk.h>
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
#include <linux/rtnetlink.h>
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
#include <linux/slab.h>
#include <linux/spinlock.h>
struct authenc_instance_ctx {
struct crypto_spawn auth;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
struct crypto_skcipher_spawn enc;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
};
struct crypto_authenc_ctx {
spinlock_t auth_lock;
struct crypto_hash *auth;
struct crypto_ablkcipher *enc;
};
static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
unsigned int keylen)
{
unsigned int authkeylen;
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
unsigned int enckeylen;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct crypto_hash *auth = ctx->auth;
struct crypto_ablkcipher *enc = ctx->enc;
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
struct rtattr *rta = (void *)key;
struct crypto_authenc_key_param *param;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
int err = -EINVAL;
[CRYPTO] authenc: Use RTA_OK to check length This patch changes setkey to use RTA_OK to check the validity of the setkey request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-09 19:55:21 -07:00
if (!RTA_OK(rta, keylen))
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
goto badkey;
if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
goto badkey;
if (RTA_PAYLOAD(rta) < sizeof(*param))
goto badkey;
param = RTA_DATA(rta);
enckeylen = be32_to_cpu(param->enckeylen);
key += RTA_ALIGN(rta->rta_len);
keylen -= RTA_ALIGN(rta->rta_len);
if (keylen < enckeylen)
goto badkey;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
authkeylen = keylen - enckeylen;
crypto_hash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
crypto_hash_set_flags(auth, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
err = crypto_hash_setkey(auth, key, authkeylen);
crypto_aead_set_flags(authenc, crypto_hash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
if (err)
goto out;
crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) &
CRYPTO_TFM_RES_MASK);
out:
return err;
[CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 08:11:53 -07:00
badkey:
crypto_aead_set_flags(authenc, CRYPTO_TFM_RES_BAD_KEY_LEN);
goto out;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
}
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
static void authenc_chain(struct scatterlist *head, struct scatterlist *sg,
int chain)
{
if (chain) {
head->length += sg->length;
sg = scatterwalk_sg_next(sg);
}
if (sg)
scatterwalk_sg_chain(head, 2, sg);
else
sg_mark_end(head);
}
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
static u8 *crypto_authenc_hash(struct aead_request *req, unsigned int flags,
struct scatterlist *cipher,
unsigned int cryptlen)
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct crypto_hash *auth = ctx->auth;
struct hash_desc desc = {
.tfm = auth,
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
.flags = aead_request_flags(req) & flags,
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
};
u8 *hash = aead_request_ctx(req);
int err;
hash = (u8 *)ALIGN((unsigned long)hash + crypto_hash_alignmask(auth),
crypto_hash_alignmask(auth) + 1);
spin_lock_bh(&ctx->auth_lock);
err = crypto_hash_init(&desc);
if (err)
goto auth_unlock;
err = crypto_hash_update(&desc, req->assoc, req->assoclen);
if (err)
goto auth_unlock;
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
err = crypto_hash_update(&desc, cipher, cryptlen);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
if (err)
goto auth_unlock;
err = crypto_hash_final(&desc, hash);
auth_unlock:
spin_unlock_bh(&ctx->auth_lock);
if (err)
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
return ERR_PTR(err);
return hash;
}
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
static int crypto_authenc_genicv(struct aead_request *req, u8 *iv,
unsigned int flags)
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct scatterlist *dst = req->dst;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
struct scatterlist cipher[2];
struct page *dstp;
unsigned int ivsize = crypto_aead_ivsize(authenc);
unsigned int cryptlen;
u8 *vdst;
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
u8 *hash;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
dstp = sg_page(dst);
vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
sg_init_table(cipher, 2);
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, dst, vdst == iv + ivsize);
cryptlen = req->cryptlen + ivsize;
hash = crypto_authenc_hash(req, flags, cipher, cryptlen);
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
if (IS_ERR(hash))
return PTR_ERR(hash);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
scatterwalk_map_and_copy(hash, cipher, cryptlen,
[CRYPTO] aead: Make authsize a run-time parameter As it is authsize is an algorithm paramter which cannot be changed at run-time. This is inconvenient because hardware that implements such algorithms would have to register each authsize that they support separately. Since authsize is a property common to all AEAD algorithms, we can add a function setauthsize that sets it at run-time, just like setkey. This patch does exactly that and also changes authenc so that authsize is no longer a parameter of its template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-02 00:49:21 -07:00
crypto_aead_authsize(authenc), 1);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
return 0;
}
static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
int err)
{
crypto: authenc - Avoid using clobbered request pointer Authenc works in two stages for encryption, it first encrypts and then computes an ICV. The context memory of the request is used by both operations. The problem is that when an asynchronous encryption completes, we will compute the ICV and then reread the context memory of the encryption to get the original request. It just happens that we have a buffer of 16 bytes in front of the request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger the bug. However, any attempt to uses a larger ICV instantly kills the machine when the first asynchronous encryption is completed. This patch fixes this by saving the request pointer before we start the ICV computation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-22 08:04:06 -07:00
struct aead_request *areq = req->data;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
if (!err) {
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(areq);
u8 *iv = (u8 *)(abreq + 1) +
crypto_ablkcipher_reqsize(ctx->enc);
err = crypto_authenc_genicv(areq, iv, 0);
}
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
crypto: authenc - Avoid using clobbered request pointer Authenc works in two stages for encryption, it first encrypts and then computes an ICV. The context memory of the request is used by both operations. The problem is that when an asynchronous encryption completes, we will compute the ICV and then reread the context memory of the encryption to get the original request. It just happens that we have a buffer of 16 bytes in front of the request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger the bug. However, any attempt to uses a larger ICV instantly kills the machine when the first asynchronous encryption is completed. This patch fixes this by saving the request pointer before we start the ICV computation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-22 08:04:06 -07:00
aead_request_complete(areq, err);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
}
static int crypto_authenc_encrypt(struct aead_request *req)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(req);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
struct crypto_ablkcipher *enc = ctx->enc;
struct scatterlist *dst = req->dst;
unsigned int cryptlen = req->cryptlen;
u8 *iv = (u8 *)(abreq + 1) + crypto_ablkcipher_reqsize(enc);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
int err;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
ablkcipher_request_set_tfm(abreq, enc);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
ablkcipher_request_set_callback(abreq, aead_request_flags(req),
crypto_authenc_encrypt_done, req);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
ablkcipher_request_set_crypt(abreq, req->src, dst, cryptlen, req->iv);
memcpy(iv, req->iv, crypto_aead_ivsize(authenc));
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
err = crypto_ablkcipher_encrypt(abreq);
if (err)
return err;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
return crypto_authenc_genicv(req, iv, CRYPTO_TFM_REQ_MAY_SLEEP);
}
static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
int err)
{
crypto: authenc - Avoid using clobbered request pointer Authenc works in two stages for encryption, it first encrypts and then computes an ICV. The context memory of the request is used by both operations. The problem is that when an asynchronous encryption completes, we will compute the ICV and then reread the context memory of the encryption to get the original request. It just happens that we have a buffer of 16 bytes in front of the request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger the bug. However, any attempt to uses a larger ICV instantly kills the machine when the first asynchronous encryption is completed. This patch fixes this by saving the request pointer before we start the ICV computation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-22 08:04:06 -07:00
struct aead_request *areq = req->data;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
if (!err) {
[CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv() crypto_authenc_givencrypt_done uses req->data as struct aead_givcrypt_request, while it really points to a struct aead_request, causing this crash: BUG: unable to handle kernel paging request at 6b6b6b6b IP: [<dc87517b>] :authenc:crypto_authenc_genicv+0x23/0x109 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: hifn_795x authenc esp4 aead xfrm4_mode_tunnel sha1_generic hmac crypto_hash] Pid: 3074, comm: ping Not tainted (2.6.25 #4) EIP: 0060:[<dc87517b>] EFLAGS: 00010296 CPU: 0 EIP is at crypto_authenc_genicv+0x23/0x109 [authenc] EAX: daa04690 EBX: daa046e0 ECX: dab0a100 EDX: daa046b0 ESI: 6b6b6b6b EDI: dc872054 EBP: c033ff60 ESP: c033ff0c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process ping (pid: 3074, ti=c033f000 task=db883a80 task.ti=dab6c000) Stack: 00000000 daa046b0 c0215a3e daa04690 dab0a100 00000000 ffffffff db9fd7f0 dba208c0 dbbb1720 00000001 daa04720 00000001 c033ff54 c0119ca9 dc852a75 c033ff60 c033ff60 daa046e0 00000000 00000001 c033ff6c dc87527b 00000001 Call Trace: [<c0215a3e>] ? dev_alloc_skb+0x14/0x29 [<c0119ca9>] ? printk+0x15/0x17 [<dc87527b>] ? crypto_authenc_givencrypt_done+0x1a/0x27 [authenc] [<dc850cca>] ? hifn_process_ready+0x34a/0x352 [hifn_795x] [<dc8353c7>] ? rhine_napipoll+0x3f2/0x3fd [via_rhine] [<dc851a56>] ? hifn_check_for_completion+0x4d/0xa6 [hifn_795x] [<dc851ab9>] ? hifn_tasklet_callback+0xa/0xc [hifn_795x] [<c011d046>] ? tasklet_action+0x3f/0x66 [<c011d230>] ? __do_softirq+0x38/0x7a [<c0105a5f>] ? do_softirq+0x3e/0x71 [<c011d17c>] ? irq_exit+0x2c/0x65 [<c010e0c0>] ? smp_apic_timer_interrupt+0x5f/0x6a [<c01042e4>] ? apic_timer_interrupt+0x28/0x30 [<dc851640>] ? hifn_handle_req+0x44a/0x50d [hifn_795x] ... Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-29 06:44:28 -07:00
struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
[CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv() crypto_authenc_givencrypt_done uses req->data as struct aead_givcrypt_request, while it really points to a struct aead_request, causing this crash: BUG: unable to handle kernel paging request at 6b6b6b6b IP: [<dc87517b>] :authenc:crypto_authenc_genicv+0x23/0x109 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: hifn_795x authenc esp4 aead xfrm4_mode_tunnel sha1_generic hmac crypto_hash] Pid: 3074, comm: ping Not tainted (2.6.25 #4) EIP: 0060:[<dc87517b>] EFLAGS: 00010296 CPU: 0 EIP is at crypto_authenc_genicv+0x23/0x109 [authenc] EAX: daa04690 EBX: daa046e0 ECX: dab0a100 EDX: daa046b0 ESI: 6b6b6b6b EDI: dc872054 EBP: c033ff60 ESP: c033ff0c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process ping (pid: 3074, ti=c033f000 task=db883a80 task.ti=dab6c000) Stack: 00000000 daa046b0 c0215a3e daa04690 dab0a100 00000000 ffffffff db9fd7f0 dba208c0 dbbb1720 00000001 daa04720 00000001 c033ff54 c0119ca9 dc852a75 c033ff60 c033ff60 daa046e0 00000000 00000001 c033ff6c dc87527b 00000001 Call Trace: [<c0215a3e>] ? dev_alloc_skb+0x14/0x29 [<c0119ca9>] ? printk+0x15/0x17 [<dc87527b>] ? crypto_authenc_givencrypt_done+0x1a/0x27 [authenc] [<dc850cca>] ? hifn_process_ready+0x34a/0x352 [hifn_795x] [<dc8353c7>] ? rhine_napipoll+0x3f2/0x3fd [via_rhine] [<dc851a56>] ? hifn_check_for_completion+0x4d/0xa6 [hifn_795x] [<dc851ab9>] ? hifn_tasklet_callback+0xa/0xc [hifn_795x] [<c011d046>] ? tasklet_action+0x3f/0x66 [<c011d230>] ? __do_softirq+0x38/0x7a [<c0105a5f>] ? do_softirq+0x3e/0x71 [<c011d17c>] ? irq_exit+0x2c/0x65 [<c010e0c0>] ? smp_apic_timer_interrupt+0x5f/0x6a [<c01042e4>] ? apic_timer_interrupt+0x28/0x30 [<dc851640>] ? hifn_handle_req+0x44a/0x50d [hifn_795x] ... Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-29 06:44:28 -07:00
err = crypto_authenc_genicv(areq, greq->giv, 0);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
}
crypto: authenc - Avoid using clobbered request pointer Authenc works in two stages for encryption, it first encrypts and then computes an ICV. The context memory of the request is used by both operations. The problem is that when an asynchronous encryption completes, we will compute the ICV and then reread the context memory of the encryption to get the original request. It just happens that we have a buffer of 16 bytes in front of the request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger the bug. However, any attempt to uses a larger ICV instantly kills the machine when the first asynchronous encryption is completed. This patch fixes this by saving the request pointer before we start the ICV computation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-22 08:04:06 -07:00
aead_request_complete(areq, err);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
}
static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
{
struct crypto_aead *authenc = aead_givcrypt_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct aead_request *areq = &req->areq;
struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
u8 *iv = req->giv;
int err;
skcipher_givcrypt_set_tfm(greq, ctx->enc);
skcipher_givcrypt_set_callback(greq, aead_request_flags(areq),
crypto_authenc_givencrypt_done, areq);
skcipher_givcrypt_set_crypt(greq, areq->src, areq->dst, areq->cryptlen,
areq->iv);
skcipher_givcrypt_set_giv(greq, iv, req->seq);
err = crypto_skcipher_givencrypt(greq);
if (err)
return err;
return crypto_authenc_genicv(areq, iv, CRYPTO_TFM_REQ_MAY_SLEEP);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
}
[CRYPTO] authenc: Fix hash verification The previous code incorrectly included the hash in the verification which also meant that we'd crash and burn when it comes to actually verifying the hash since we'd go past the end of the SG list. This patch fixes that by subtracting authsize from cryptlen at the start. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-04 02:04:21 -07:00
static int crypto_authenc_verify(struct aead_request *req,
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
struct scatterlist *cipher,
[CRYPTO] authenc: Fix hash verification The previous code incorrectly included the hash in the verification which also meant that we'd crash and burn when it comes to actually verifying the hash since we'd go past the end of the SG list. This patch fixes that by subtracting authsize from cryptlen at the start. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-04 02:04:21 -07:00
unsigned int cryptlen)
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
u8 *ohash;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
u8 *ihash;
unsigned int authsize;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, cipher,
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
cryptlen);
if (IS_ERR(ohash))
return PTR_ERR(ohash);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
[CRYPTO] aead: Make authsize a run-time parameter As it is authsize is an algorithm paramter which cannot be changed at run-time. This is inconvenient because hardware that implements such algorithms would have to register each authsize that they support separately. Since authsize is a property common to all AEAD algorithms, we can add a function setauthsize that sets it at run-time, just like setkey. This patch does exactly that and also changes authenc so that authsize is no longer a parameter of its template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-02 00:49:21 -07:00
authsize = crypto_aead_authsize(authenc);
[CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:15:41 -07:00
ihash = ohash + authsize;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
scatterwalk_map_and_copy(ihash, cipher, cryptlen, authsize, 0);
[CRYPTO] aead: Return EBADMSG for ICV mismatch This patch changes gcm/authenc to return EBADMSG instead of EINVAL for ICV mismatches. This convention has already been adopted by IPsec. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-04 02:07:27 -07:00
return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
}
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
unsigned int cryptlen)
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
{
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct scatterlist *src = req->src;
struct scatterlist cipher[2];
struct page *srcp;
unsigned int ivsize = crypto_aead_ivsize(authenc);
u8 *vsrc;
srcp = sg_page(src);
vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset;
sg_init_table(cipher, 2);
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, src, vsrc == iv + ivsize);
return crypto_authenc_verify(req, cipher, cryptlen + ivsize);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
}
static int crypto_authenc_decrypt(struct aead_request *req)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(req);
[CRYPTO] authenc: Fix hash verification The previous code incorrectly included the hash in the verification which also meant that we'd crash and burn when it comes to actually verifying the hash since we'd go past the end of the SG list. This patch fixes that by subtracting authsize from cryptlen at the start. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-04 02:04:21 -07:00
unsigned int cryptlen = req->cryptlen;
unsigned int authsize = crypto_aead_authsize(authenc);
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
u8 *iv = req->iv;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
int err;
[CRYPTO] authenc: Fix hash verification The previous code incorrectly included the hash in the verification which also meant that we'd crash and burn when it comes to actually verifying the hash since we'd go past the end of the SG list. This patch fixes that by subtracting authsize from cryptlen at the start. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-04 02:04:21 -07:00
if (cryptlen < authsize)
return -EINVAL;
cryptlen -= authsize;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
err = crypto_authenc_iverify(req, iv, cryptlen);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
if (err)
return err;
ablkcipher_request_set_tfm(abreq, ctx->enc);
ablkcipher_request_set_callback(abreq, aead_request_flags(req),
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
req->base.complete, req->base.data);
ablkcipher_request_set_crypt(abreq, req->src, req->dst, cryptlen, iv);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
return crypto_ablkcipher_decrypt(abreq);
}
static int crypto_authenc_init_tfm(struct crypto_tfm *tfm)
{
struct crypto_instance *inst = (void *)tfm->__crt_alg;
struct authenc_instance_ctx *ictx = crypto_instance_ctx(inst);
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
struct crypto_hash *auth;
struct crypto_ablkcipher *enc;
int err;
auth = crypto_spawn_hash(&ictx->auth);
if (IS_ERR(auth))
return PTR_ERR(auth);
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
enc = crypto_spawn_skcipher(&ictx->enc);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
err = PTR_ERR(enc);
if (IS_ERR(enc))
goto err_free_hash;
ctx->auth = auth;
ctx->enc = enc;
tfm->crt_aead.reqsize = max_t(unsigned int,
(crypto_hash_alignmask(auth) &
~(crypto_tfm_ctx_alignment() - 1)) +
[CRYPTO] aead: Make authsize a run-time parameter As it is authsize is an algorithm paramter which cannot be changed at run-time. This is inconvenient because hardware that implements such algorithms would have to register each authsize that they support separately. Since authsize is a property common to all AEAD algorithms, we can add a function setauthsize that sets it at run-time, just like setkey. This patch does exactly that and also changes authenc so that authsize is no longer a parameter of its template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-02 00:49:21 -07:00
crypto_hash_digestsize(auth) * 2,
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
sizeof(struct skcipher_givcrypt_request) +
crypto_ablkcipher_reqsize(enc) +
crypto_ablkcipher_ivsize(enc));
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
spin_lock_init(&ctx->auth_lock);
return 0;
err_free_hash:
crypto_free_hash(auth);
return err;
}
static void crypto_authenc_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
crypto_free_hash(ctx->auth);
crypto_free_ablkcipher(ctx->enc);
}
static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb)
{
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
struct crypto_attr_type *algt;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
struct crypto_instance *inst;
struct crypto_alg *auth;
struct crypto_alg *enc;
struct authenc_instance_ctx *ctx;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
const char *enc_name;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
int err;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
algt = crypto_get_attr_type(tb);
err = PTR_ERR(algt);
if (IS_ERR(algt))
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
return ERR_PTR(err);
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
return ERR_PTR(-EINVAL);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
auth = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
CRYPTO_ALG_TYPE_HASH_MASK);
if (IS_ERR(auth))
return ERR_PTR(PTR_ERR(auth));
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
enc_name = crypto_attr_alg_name(tb[2]);
err = PTR_ERR(enc_name);
if (IS_ERR(enc_name))
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
goto out_put_auth;
inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
err = -ENOMEM;
if (!inst)
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
goto out_put_auth;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
ctx = crypto_instance_ctx(inst);
err = crypto_init_spawn(&ctx->auth, auth, inst, CRYPTO_ALG_TYPE_MASK);
if (err)
goto err_free_inst;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
crypto_set_skcipher_spawn(&ctx->enc, inst);
err = crypto_grab_skcipher(&ctx->enc, enc_name, 0,
crypto_requires_sync(algt->type,
algt->mask));
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
if (err)
goto err_drop_auth;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
enc = crypto_skcipher_spawn_alg(&ctx->enc);
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME,
"authenc(%s,%s)", auth->cra_name, enc->cra_name) >=
CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
"authenc(%s,%s)", auth->cra_driver_name,
enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD;
inst->alg.cra_flags |= enc->cra_flags & CRYPTO_ALG_ASYNC;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
inst->alg.cra_priority = enc->cra_priority * 10 + auth->cra_priority;
inst->alg.cra_blocksize = enc->cra_blocksize;
[CRYPTO] authenc: Use or instead of max on alignment masks Since alignment masks are always one less than a power of two, we can use binary or to find their maximum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-22 07:46:40 -07:00
inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
inst->alg.cra_type = &crypto_aead_type;
[CRYPTO] authenc: Fix typo in ivsize The ivsize should be fetched from ablkcipher, not blkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-09 19:54:44 -07:00
inst->alg.cra_aead.ivsize = enc->cra_ablkcipher.ivsize;
[CRYPTO] aead: Make authsize a run-time parameter As it is authsize is an algorithm paramter which cannot be changed at run-time. This is inconvenient because hardware that implements such algorithms would have to register each authsize that they support separately. Since authsize is a property common to all AEAD algorithms, we can add a function setauthsize that sets it at run-time, just like setkey. This patch does exactly that and also changes authenc so that authsize is no longer a parameter of its template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-02 00:49:21 -07:00
inst->alg.cra_aead.maxauthsize = auth->cra_type == &crypto_hash_type ?
auth->cra_hash.digestsize :
auth->cra_digest.dia_digestsize;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
inst->alg.cra_ctxsize = sizeof(struct crypto_authenc_ctx);
inst->alg.cra_init = crypto_authenc_init_tfm;
inst->alg.cra_exit = crypto_authenc_exit_tfm;
inst->alg.cra_aead.setkey = crypto_authenc_setkey;
inst->alg.cra_aead.encrypt = crypto_authenc_encrypt;
inst->alg.cra_aead.decrypt = crypto_authenc_decrypt;
[CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-10 01:20:24 -07:00
inst->alg.cra_aead.givencrypt = crypto_authenc_givencrypt;
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
out:
crypto_mod_put(auth);
return inst;
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
err_drop_enc:
crypto_drop_skcipher(&ctx->enc);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
err_drop_auth:
crypto_drop_spawn(&ctx->auth);
err_free_inst:
kfree(inst);
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
out_put_auth:
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
inst = ERR_PTR(err);
goto out;
}
static void crypto_authenc_free(struct crypto_instance *inst)
{
struct authenc_instance_ctx *ctx = crypto_instance_ctx(inst);
[CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-12-17 05:12:49 -07:00
crypto_drop_skcipher(&ctx->enc);
[CRYPTO] aead: Add authenc This patch adds the authenc algorithm which constructs an AEAD algorithm from an asynchronous block cipher and a hash. The construction is done by concatenating the encrypted result from the cipher with the output from the hash, as is used by the IPsec ESP protocol. The authenc algorithm exists as a template with four parameters: authenc(auth, authsize, enc, enckeylen). The authentication algorithm, the authentication size (i.e., truncating the output of the authentication algorithm), the encryption algorithm, and the encryption key length. Both the size field and the key length field are in bytes. For example, AES-128 with SHA1-HMAC would be represented by authenc(hmac(sha1), 12, cbc(aes), 16) The key for the authenc algorithm is the concatenation of the keys for the authentication algorithm with the encryption algorithm. For the above example, if a key of length 36 bytes is given, then hmac(sha1) would receive the first 20 bytes while the last 16 would be given to cbc(aes). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-08-30 01:24:15 -07:00
crypto_drop_spawn(&ctx->auth);
kfree(inst);
}
static struct crypto_template crypto_authenc_tmpl = {
.name = "authenc",
.alloc = crypto_authenc_alloc,
.free = crypto_authenc_free,
.module = THIS_MODULE,
};
static int __init crypto_authenc_module_init(void)
{
return crypto_register_template(&crypto_authenc_tmpl);
}
static void __exit crypto_authenc_module_exit(void)
{
crypto_unregister_template(&crypto_authenc_tmpl);
}
module_init(crypto_authenc_module_init);
module_exit(crypto_authenc_module_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Simple AEAD wrapper for IPsec");
Copy Permalink