kevin/linux
1
Fork 0
Code
63c3b9d71b
linux/arch/powerpc/sysdev/Makefile

60 lines
2.0 KiB
Makefile
Raw Normal View History

powerpc: Add configurable -Werror for arch/powerpc Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09 13:48:51 -07:00
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
powerpc/Makefiles: Change to new flag variables Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-22 13:51:09 -07:00
ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
[POWERPC] Optimise some TOC usage Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 03:23:54 -07:00
[POWERPC] pasemi: Implement MSI support Implement MSI support for PA Semi PWRficient platforms. MSI is done through a special range of sources on the openpic controller, and they're unfortunately breaking the usual concepts of how sources are programmed: * The source is calculated as 512 + the value written into the MSI register * The vector for this source is added to the source and reported through IACK This means that for simplicity, it makes much more sense to just set the vector to 0 for the source, since that's really the vector we expect to see from IACK. Also, the affinity/priority registers will affect 16 sources at a time. To avoid most (simple) users from being limited by this, allocate 16 sources per device but use only one. This means that there's a total of 32 sources. If we get usage scenarions that need more sources, the allocator should probably be revised to take an alignment argument and size, not just do natural alignment. Finally, since I'm already touching the MPIC names on pasemi, rename the base one from the somewhat odd " PAS-OPIC " to "PASEMI-OPIC". Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 23:44:46 -07:00
mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 19:58:36 -07:00
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 01:32:46 -07:00
fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o
powerpc: Split-out common MSI bitmap logic into msi_bitmap.c There are now two almost identical implementations of an MSI bitmap allocator, one in mpic_msi.c and the other in fsl_msi.c. Merge them together and put the result in msi_bitmap.c. Some of the MPIC bits will remain to provide a nicer interface for the MPIC users. In the process we fix two buglets. The first is that the allocation routines, now msi_bitmap_alloc_hwirqs(), returned an unsigned result, even though they use -1 to indicate allocation failure. Although all the callers were checking correctly, it is much better for the routine to just return an int. At least until someone wants > ~2 billion MSIs. The second buglet is that the device tree reservation logic only allowed power-of-two reservations. AFAICT that didn't effect any existing code but it's nicer if we can reserve arbitrary irqs from MSI use. We also add some selftests, which exposed the two buglets and now test for them, as well as some basic sanity tests. The tests are only built when CONFIG_DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-05 16:10:01 -07:00
obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o
[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 19:58:36 -07:00
powerpc: Pull out MPC106 (grackle) initialization code into its own file This is so that the 32-bit CHRP code can use it. The MPC106 initialization code is now in arch/powerpc/sysdev/grackle.c and is controlled by CONFIG_PPC_MPC106. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 00:16:38 -07:00
obj-$(CONFIG_PPC_MPC106) += grackle.o
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 22:15:47 -07:00
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
[POWERPC] Add PMI driver for cell blade This adds driver code for the PMI device found in future IBM products. PMI stands for "Platform Management Interrupt" and is a way to communicate with the BMC (Baseboard Management Controller). It provides bidirectional communication with a low latency. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Heiko J Schick <schickhj@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 06:09:45 -07:00
obj-$(CONFIG_PPC_PMI) += pmi.o
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-13 19:10:10 -07:00
obj-$(CONFIG_U3_DART) += dart_iommu.o
[PATCH] powerpc: move mmio_nvram.c over to arch/powerpc The nvram code formally known as bpa_nvram.c is rather generic really, so it is quite likely to be useful to future boards not based on cell. This patch puts it into arch/powerpc/sysdev. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 18:08:40 -07:00
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
[PATCH] powerpc: Add FSL SOC library and setup code Parse the flat device tree for devices on Freescale SOC's that we know about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt). We need to setup platform devices and platform data for these devices to match arch/ppc usage. Also add a helper function (get_immrbase) that reports the base address of the MMIO registers on the SOC. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 10:19:13 -07:00
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors. This MSI driver can be used on 83xx/85xx/86xx board. In this driver, virtual interrupt host and chip were setup. There are 256 MSI interrupts in this host, Every 32 MSI interrupts cascaded to one IPIC/MPIC interrupt. The chip was treated as edge sensitive and some necessary functions were setup for this chip. Before using the MSI interrupt, PCI/PCIE device need to ask for a MSI interrupt in the 256 MSI interrupts. A 256bit bitmap show which MSI interrupt was used, reserve bit in the bitmap can be used to force the device use some designate MSI interrupt in the 256 MSI interrupts. Sometimes this is useful for testing the all the MSI interrupts. The msi-available-ranges property in the dts file was used for this purpose. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 01:32:46 -07:00
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
powerpc/85xx/86xx: Add suspend/resume support This patch adds suspend/resume support for MPC8540 and MPC8641D- compatible CPUs. To reach sleep state, we just write the SLP bit into the PM control and status register. So far we don't support Deep Sleep mode as found in newer MPC85xx CPUs (i.e. MPC8536). It can be relatively easy implemented though, and for it we reserve 'mem' suspend type. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-15 14:43:57 -07:00
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
[POWERPC] fsl_lbc: implement few UPM routines Freescale UPM can be used to adjust localbus timings or to generate orbitrary, pre-programmed "patterns" on the external Localbus signals. This patch implements few routines so drivers could work with UPMs in safe and generic manner. So far there is just one user of these routines: Freescale UPM NAND driver. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-11 10:03:40 -07:00
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
powerpc/sysdev: implement FSL GTM support GTM stands for General-purpose Timers Module and able to generate timer{1,2,3,4} interrupts. These timers are used by the drivers that need time precise interrupts (like for USB transactions scheduling for the Freescale USB Host controller as found in some QE and CPM chips), or these timers could be used as wakeup events from the CPU deep-sleep mode. Things unimplemented: 1. Cascaded (32 bit) timers (1-2, 3-4). This is straightforward to implement when needed, two timers should be marked as "requested" and configured as appropriate. 2. Super-cascaded (64 bit) timers (1-2-3-4). This is also straightforward to implement when needed, all timers should be marked as "requested" and configured as appropriate. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 09:38:54 -07:00
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
powerpc: gpio driver for mpc8349/8572/8610 and compatible Structured similar to the existing QE GPIO support. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23 08:35:38 -07:00
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
powerpc/85xx: add cache-sram support It adds cache-sram support in P1/P2 QorIQ platforms as under: * A small abstraction over powerpc's remote heap allocator * Exports mpc85xx_cache_sram_alloc()/free() APIs * Supports only one contiguous SRAM window * Drivers can do the following in Kconfig to use these APIs "select FSL_85XX_CACHE_SRAM if MPC85xx" * Required SRAM size and the offset where SRAM should be mapped must be provided at kernel command line as : cache-sram-size=<value> cache-sram-offset=<offset> Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-13 05:00:56 -07:00
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
powerpc: Implement GPIO driver for simple memory-mapped banks The driver supports very simple GPIO controllers, that is, when a controller provides just a 'data' register. Such controllers may be found in various BCSRs (Board's FPGAs used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc). So far we support only 1-byte GPIO banks. Support for other widths may be implemented when/if needed. p.s. To avoid "made up" compatible entries (like compatible = "simple-gpio"), boards must call simple_gpiochip_init() to pass the compatible string. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-18 09:37:26 -07:00
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
[POWERPC] Move RapidIO support code from arch/ppc Do just enough to move the RapidIO support code for 85xx over from arch/ppc into arch/powerpc and make it still build. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 05:12:06 -07:00
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
[POWERPC] Add tsi108 pci and platform device data register function Add Tundra Semiconductor tsi108 pci and platform device data register function support. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> --- Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-13 00:07:23 -07:00
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
[POWERPC] Add QUICC Engine (QE) infrastructure Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-03 21:10:46 -07:00
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
[POWERPC] bestcomm: core bestcomm support for Freescale MPC5200 This patch adds support for the core of the BestComm API for the Freescale MPC5200(b). The BestComm engine is a microcode-controlled / tasks-based DMA used by several of the onchip devices. Setting up the tasks / memory allocation and all common low level functions are handled by this patch. The specifics details of each tasks and their microcode are split-out in separate patches. This is not the official API, but a much cleaner one. (hopefully) Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-16 03:53:27 -07:00
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
[POWERPC] Add Marvell mv64x60 PCI bridge support This patch adds PCI bridge support for the Marvell mv64x60 chip. We also provide the ability to read/write the mv64x60 hotswap register via sysfs if the hs_reg_valid property is set in the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-11 17:57:12 -07:00
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
[POWERPC] Add Marvell mv64x60 udbg putc/getc functions Commit 69331af, "Fixes and cleanups for earlyprintk aka boot console", resulted in printk output prior to the initialization of the mpsc console driver not being printed. That commit causes the mpsc's CON_PRINTBUFFER flag to be cleared since udbg should have printed the previous output. I guess we can no longer ignore udbg. :) This patch provides udbg_putc() and udbg_getc() functions for the Marvell mv64x60 chips. These functions are enabled if an mv64x60 port is to be used as the console as determined from the device tree. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-14 12:52:22 -07:00
obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
mv64x60_udbg.o
[POWERPC] Create add_rtc() function to enable the RTC CMOS driver In order to use the RTC CMOS driver, each architecture must register a platform device for the RTC. This creates a function to register the platform device based on the RTC device node and verifies that the RTC port against the hard-coded value in asm/mc146818rtc.h. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 09:55:46 -07:00
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
[CELL] driver for DDR2 memory on AXON The Axon bridge chip used on new Cell/B.E. based blade servers comes with a DDR2 memory controller that can be used to attach cheap memory modules, as opposed to the high-speed XDR memory that is used by the CPU itself. Since the memory controller does not participate in the cache coherency protocol, we can not use the memory direcly for Linux applications, but by providing a block device it can be used for swap space, temporary file storage and through the use of the direct_access block device operation for mapping into user addresses, when it is mounted with an appropriate file system. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 12:39:26 -07:00
obj-$(CONFIG_AXON_RAM) += axonram.o
[POWERPC] Copy i8259 code back to arch/ppc This copies the i8259 interrupt controller driver from arch/powerpc to arch/ppc. It's currently shared by both architectures, but the upcoming arch/powerpc interrupt changes will break the arch/ppc builds. The changes are too important to just use #ifdef's in the driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 02:36:30 -07:00
[POWERPC] Pass the pci_controller into pci_exclude_device There are times that we need to know which controller we are on to decide how to exclude devices properly. We now pass the pci_controller that we are going to use down to the pci_exclude_device function. This will greatly simplify being able to exclude the PHBs in multiple controller setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-21 22:23:57 -07:00
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
[POWERPC] Copy i8259 code back to arch/ppc This copies the i8259 interrupt controller driver from arch/powerpc to arch/ppc. It's currently shared by both architectures, but the upcoming arch/powerpc interrupt changes will break the arch/ppc builds. The changes are too important to just use #ifdef's in the driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 02:36:30 -07:00
obj-$(CONFIG_PPC_I8259) += i8259.o
[POWERPC] Add IPIC Kconfig option IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 17:05:31 -07:00
obj-$(CONFIG_IPIC) += ipic.o
[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller This patch adds a driver to arch/powerpc/sysdev for the UIC, the on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new irq host mapping infrastructure. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-17 23:36:26 -07:00
obj-$(CONFIG_4xx) += uic.o
[POWERPC] 4xx: Add PPC4xx L2-cache support (440GX) This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 04:39:50 -07:00
obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
[POWERPC] Virtex: add xilinx interrupt controller driver Adds support for the Xilinx opb-intc interrupt controller Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-01 19:15:23 -07:00
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
powerpc/virtex: Add support for Xilinx PCI host bridge This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06 09:14:22 -07:00
obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
[POWERPC] Enable RTC for Ebony and Walnut (v2) This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-10 20:25:34 -07:00
obj-$(CONFIG_OF_RTC) += of_rtc.o
[POWERPC] 4xx: PLB to PCI-X support This adds base support code for the 4xx PCI-X bridge. It also provides placeholders for the PCI and PCI-E version but they aren't supported with this patch. The bridges are configured based on device-tree properties. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-20 21:39:22 -07:00
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
powerpc/4xx: Add suspend and idle support Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-10-08 03:25:27 -07:00
obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o
powerpc/4xx: Add PowerPC 4xx GPIO driver This patch adds support for the GPIO functions of PPC40x and PPC44x SOCs. Signed-off-by: Steve Falco <sfalco@harris.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-12 23:04:09 -07:00
obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
POWERPC: Move generic cpm2 stuff to powerpc This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 11:18:53 -07:00
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-16 09:43:43 -07:00
obj-$(CONFIG_CPM) += cpm_common.o
[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-25 07:31:42 -07:00
obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o
powerpc/QE: switch to the cpm_muram implementation This is very trivial patch. We're transitioning to the cpm_muram_* calls. That's it. Less trivial changes: - BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_* prototypes; - qe_muram_dump was unused and thus removed; - added some code to the cpm_common.c to support legacy QE bindings (data-only node name). - For convenience, define qe_* calls to cpm_*. So drivers need not to be changed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-23 09:39:06 -07:00
obj-$(CONFIG_QUICC_ENGINE) += cpm_common.o
[POWERPC] Don't build arch/powerpc/sysdev/dcr.c for ARCH=ppc kernels dcr.c is an arch/powerpc only thing. Compiling ppc405 arch/ppc kernels throws warnings without this change. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-04 14:44:51 -07:00
obj-$(CONFIG_PPC_DCR) += dcr.o
[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-25 07:31:42 -07:00
obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o
[POWERPC] 8xx: powerpc port of core CPM PIC This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 12:41:24 -07:00
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
[POWERPC] Add 6xx-style HID0_SLEEP support. This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 08:38:13 -07:00
powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-16 23:30:22 -07:00
obj-$(CONFIG_PPC_MPC512x) += mpc5xxx_clocks.o
obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clocks.o
[POWERPC] Add 6xx-style HID0_SLEEP support. This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-28 08:38:13 -07:00
ifeq ($(CONFIG_SUSPEND),y)
obj-$(CONFIG_6xx) += 6xx-suspend.o
endif
Copy Permalink