kevin/linux
1
Fork 0
Code
60ea8226cb
linux/block/Kconfig.iosched

69 lines
1.6 KiB
Plaintext
Raw Normal View History

[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 11:45:40 -07:00
if BLOCK
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
menu "IO Schedulers"
config IOSCHED_NOOP
bool
default y
---help---
The no-op I/O scheduler is a minimal scheduler that does basic merging
and sorting. Its main uses include non-disk based block devices like
memory devices, and specialised software or hardware environments
that do their own scheduling and require only minimal assistance from
the kernel.
config IOSCHED_DEADLINE
tristate "Deadline I/O scheduler"
default y
---help---
block: remove the anticipatory IO scheduler AS is mostly a subset of CFQ, so there's little point in still providing this separate IO scheduler. Hopefully at some point we can get down to one single IO scheduler again, at least this brings us closer by having only one intelligent IO scheduler. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 00:37:51 -07:00
The deadline I/O scheduler is simple and compact. It will provide
CSCAN service with FIFO expiration of requests, switching to
a new point in the service tree and doing a batch of IO from there
in case of expiry.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
config IOSCHED_CFQ
tristate "CFQ I/O scheduler"
default y
---help---
The CFQ I/O scheduler tries to distribute bandwidth equally
among all processes in the system. It should provide a fair
block: CFQ is more than a desktop scheduler Update Kconfig.iosched entry. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-03 00:40:47 -07:00
and low latency working environment, suitable for both desktop
and server systems.
update I/O sched Kconfig help texts - CFQ is now default, not AS. Change I/O scheduler description to correctly show CFQ as being the default scheduler and not the anticipatory scheduler that previously was default. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 12:08:22 -07:00
This is the default I/O scheduler.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
blkio: Introduce per cfq group weights and vdisktime calculations o Bring in the per cfq group weight and how vdisktime is calculated for the group. Also bring in the functionality of updating the min_vdisktime of the group service tree. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 10:59:43 -07:00
config CFQ_GROUP_IOSCHED
bool "CFQ Group Scheduling support"
blk-cgroup: config options re-arrangement This patch fixes few usability and configurability issues. o All the cgroup based controller options are configurable from "Genral Setup/Control Group Support/" menu. blkio is the only exception. Hence make this option visible in above menu and make it configurable from there to bring it inline with rest of the cgroup based controllers. o Get rid of CONFIG_DEBUG_CFQ_IOSCHED. This option currently does two things. - Enable printing of cgroup paths in blktrace - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat files in cgroup. If we are using group scheduling, blktrace data is of not really much use if cgroup information is not present. To get this data, currently one has to also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of all the additional debug stat files which is not desired. Hence, this patch moves printing of cgroup paths under CONFIG_CFQ_GROUP_IOSCHED. This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which can be enabled through config menu. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Divyesh Shah <dpshah@google.com> Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 10:27:56 -07:00
depends on IOSCHED_CFQ && BLK_CGROUP
blkio: Introduce per cfq group weights and vdisktime calculations o Bring in the per cfq group weight and how vdisktime is calculated for the group. Also bring in the functionality of updating the min_vdisktime of the group service tree. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 10:59:43 -07:00
default n
---help---
Enable group IO scheduling in CFQ.
[PATCH] block cleanups: Add kconfig default iosched submenu Add a kconfig submenu to select the default I/O scheduler, in case anticipatory is not compiled in or another default is preferred. Also, since no-op is always available, we should use it whenever the selected default is not. Signed-off-by: Nate Diller <nate@namesys.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:02:19 -07:00
choice
prompt "Default I/O scheduler"
[PATCH] Make CFQ the default IO scheduler Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-19 01:06:48 -07:00
default DEFAULT_CFQ
[PATCH] block cleanups: Add kconfig default iosched submenu Add a kconfig submenu to select the default I/O scheduler, in case anticipatory is not compiled in or another default is preferred. Also, since no-op is always available, we should use it whenever the selected default is not. Signed-off-by: Nate Diller <nate@namesys.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:02:19 -07:00
help
Select the I/O scheduler which will be used by default for all
block devices.
config DEFAULT_DEADLINE
[BLOCK] iosched: fix setting of default io scheduler With the recent reorg of the io scheduler selection, it unfortunately became possible to select an io scheduler to be the default even if it wasn't builtin. Fix this by requiring the default scheduler to be builtin. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04 00:44:58 -07:00
bool "Deadline" if IOSCHED_DEADLINE=y
[PATCH] block cleanups: Add kconfig default iosched submenu Add a kconfig submenu to select the default I/O scheduler, in case anticipatory is not compiled in or another default is preferred. Also, since no-op is always available, we should use it whenever the selected default is not. Signed-off-by: Nate Diller <nate@namesys.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:02:19 -07:00
config DEFAULT_CFQ
[BLOCK] iosched: fix setting of default io scheduler With the recent reorg of the io scheduler selection, it unfortunately became possible to select an io scheduler to be the default even if it wasn't builtin. Fix this by requiring the default scheduler to be builtin. Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04 00:44:58 -07:00
bool "CFQ" if IOSCHED_CFQ=y
[PATCH] block cleanups: Add kconfig default iosched submenu Add a kconfig submenu to select the default I/O scheduler, in case anticipatory is not compiled in or another default is preferred. Also, since no-op is always available, we should use it whenever the selected default is not. Signed-off-by: Nate Diller <nate@namesys.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 16:02:19 -07:00
config DEFAULT_NOOP
bool "No-op"
endchoice
config DEFAULT_IOSCHED
string
default "deadline" if DEFAULT_DEADLINE
default "cfq" if DEFAULT_CFQ
default "noop" if DEFAULT_NOOP
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
endmenu
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 11:45:40 -07:00
endif
Copy Permalink