1
linux/arch/mn10300/mm/cache-mn10300.S

290 lines
6.3 KiB
ArmAsm
Raw Normal View History

/* MN10300 CPU core caching routines
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#define mn10300_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
#if mn10300_dcache_inv_range_intr_interval > 0xff
#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
#endif
.am33_2
.globl mn10300_icache_inv
.globl mn10300_dcache_inv
.globl mn10300_dcache_inv_range
.globl mn10300_dcache_inv_range2
.globl mn10300_dcache_inv_page
###############################################################################
#
# void mn10300_icache_inv(void)
# Invalidate the entire icache
#
###############################################################################
ALIGN
mn10300_icache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
beq mn10300_icache_inv_end
mov epsw,d1
and ~EPSW_IE,epsw
nop
nop
# disable the icache
and ~CHCTR_ICEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# and reenable it
and ~CHCTR_ICINV,d0
or CHCTR_ICEN,d0
movhu d0,(a0)
movhu (a0),d0
mov d1,epsw
mn10300_icache_inv_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_inv(void)
# Invalidate the entire dcache
#
###############################################################################
ALIGN
mn10300_dcache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_inv_end
mov epsw,d1
and ~EPSW_IE,epsw
nop
nop
# disable the dcache
and ~CHCTR_DCEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
and ~CHCTR_DCINV,d0
or CHCTR_DCEN,d0
movhu d0,(a0)
movhu (a0),d0
mov d1,epsw
mn10300_dcache_inv_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_inv_range(unsigned start, unsigned end)
# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
# void mn10300_dcache_inv_page(unsigned start)
# Invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
mn10300_dcache_inv_page:
mov PAGE_SIZE,d1
mn10300_dcache_inv_range2:
add d0,d1
mn10300_dcache_inv_range:
movm [d2,d3,a2],(sp)
mov CHCTR,a2
movhu (a2),d2
btst CHCTR_DCEN,d2
beq mn10300_dcache_inv_range_end
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
clr d2 # we're going to clear tag ram
# entries
# read the tags from the tag RAM, and if they indicate a valid dirty
# cache line then invalidate that line
mov DCACHE_TAG(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache tag RAM
# access address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
mn10300_dcache_inv_range_outer_loop:
# disable interrupts
mov epsw,d3
and ~EPSW_IE,epsw
nop # note that reading CHCTR and
# AND'ing D0 occupy two delay
# slots after disabling
# interrupts
# disable the dcache
movhu (a2),d0
and ~CHCTR_DCEN,d0
movhu d0,(a2)
# and wait for it to calm down
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
mn10300_dcache_inv_range_loop:
# process the way 0 slot
mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_0:
# process the way 1 slot
mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_1:
# process the way 2 slot
mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_2:
# process the way 3 slot
mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_3:
# approx every N steps we re-enable the cache and see if there are any
# interrupts to be processed
# we also break out if we've reached the end of the loop
# (the bottom nibble of the count is zero in both cases)
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
add -1,d1
btst mn10300_dcache_inv_range_intr_interval,d1
bne mn10300_dcache_inv_range_loop
# wait for the cache to finish what it's doing
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
or CHCTR_DCEN,d0
movhu d0,(a2)
movhu (a2),d0
# re-enable interrupts
# - we don't bother with delay NOPs as we'll have enough instructions
# before we disable interrupts again to give the interrupts a chance
# to happen
mov d3,epsw
# go around again if the counter hasn't yet reached zero
add 0,d1
bne mn10300_dcache_inv_range_outer_loop
mn10300_dcache_inv_range_end:
ret [d2,d3,a2],12