kevin/linux
1
Fork 0
Code
5c55125f47
linux/drivers/target/Kconfig

37 lines
1.0 KiB
Plaintext
Raw Normal View History

[SCSI] target: Add LIO target core v4.0.0-rc6 LIO target is a full featured in-kernel target framework with the following feature set: High-performance, non-blocking, multithreaded architecture with SIMD support. Advanced SCSI feature set: * Persistent Reservations (PRs) * Asymmetric Logical Unit Assignment (ALUA) * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S) * Full Error Recovery (ERL=0,1,2) * Active/active task migration and session continuation (ERL=2) * Thin LUN provisioning (UNMAP and WRITE_SAMExx) Multiprotocol target plugins Storage media independence: * Virtualization of all storage media; transparent mapping of IO to LUNs * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc. Standards compliance: * Full compliance with IETF (RFC 3720) * Full implementation of SPC-4 PRs and ALUA Significant code cleanups done by Christoph Hellwig. [jejb: fix up for new block bdev exclusive interface. Minor fixes from Randy Dunlap and Dan Carpenter.] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 12:11:26 -07:00
menuconfig TARGET_CORE
tristate "Generic Target Core Mod (TCM) and ConfigFS Infrastructure"
depends on SCSI && BLOCK
select CONFIGFS_FS
default n
help
Say Y or M here to enable the TCM Storage Engine and ConfigFS enabled
control path for target_core_mod. This includes built-in TCM RAMDISK
subsystem logic for virtual LUN 0 access
if TARGET_CORE
config TCM_IBLOCK
tristate "TCM/IBLOCK Subsystem Plugin for Linux/BLOCK"
help
Say Y here to enable the TCM/IBLOCK subsystem plugin for non-buffered
access to Linux/Block devices using BIO
config TCM_FILEIO
tristate "TCM/FILEIO Subsystem Plugin for Linux/VFS"
help
Say Y here to enable the TCM/FILEIO subsystem plugin for buffered
access to Linux/VFS struct file or struct block_device
config TCM_PSCSI
tristate "TCM/pSCSI Subsystem Plugin for Linux/SCSI"
help
Say Y here to enable the TCM/pSCSI subsystem plugin for non-buffered
passthrough access to Linux/SCSI device
[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module This patch adds the TCM_Loop Linux/SCSI LLD fabric module for accessing TCM device backstores as locally accessable SCSI LUNs in virtual SAS, FC, and iSCSI Target ports using the generic fabric TransportID and Target Port WWN naming handlers from TCM's target_core_fabric_lib.c The TCM_Loop module uses the generic fabric configfs infratructure provided by target_core_fabric_configfs.c and adds a module dependent attribute for the creation/release of the virtual I_T Nexus connected the TCM_Loop Target and Initiator Ports. TCM_Loop can also be used with scsi-generic and BSG drivers so that STGT userspace fabric modules, QEMU-KVM and other hypervisor SCSI passthrough support can access TCM device backstore and control CDB emulation. For more information please see: http://linux-iscsi.org/wiki/Tcm_loop [jejb: fixed up checkpatch stuff] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-18 15:39:17 -07:00
source "drivers/target/loopback/Kconfig"
[SCSI] tcm_fc: Adding FC_FC4 provider (tcm_fc) for FCoE target (TCM - target core) support This is a comprehensive patch for FC-FC4 provider. tcm_fc is a FC-FC4 provider which glues target core (TCM) with Fiber channel library (libfc). tcm_fc uses existing FC4 provider hooks from Fiber channel library. This Fiber channel library is used by FCoE (transport - FC over Ethernet) protocol driver as well. Combination of modules such as Fiber channel library, tcm_fc, TCM target core, and FCoE protocol driver enables functional FCoE target. This patch includes initial commit for tcm_fc plus additional enhancement, bug fixes. This tcm_fc module essentially contains 3 entry points such as "prli", "prlo", "recv". When process login request (ELS_PRLI) request is received, Fiber channel library (libfc) module calls passive providers (FC-FC4, tcm_fc) (if any registered) "prli" function. Likewise when LOGO request is received, "prlo" function of passive provider is invoked by libfc. For all other request (e.g. any read/write, task management, LUN inquiry commands), "recv" function of passiver provider is invoked by libfc. Those passive providers "prli, prlo, recv" functions interact with TCM target core for requested operation. This module was primarily developed by "Joe Eykholt" and there were significant contributions from the people listed under signed-off. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-18 16:24:14 -07:00
source "drivers/target/tcm_fc/Kconfig"
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-22 23:43:04 -07:00
source "drivers/target/iscsi/Kconfig"
[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module This patch adds the TCM_Loop Linux/SCSI LLD fabric module for accessing TCM device backstores as locally accessable SCSI LUNs in virtual SAS, FC, and iSCSI Target ports using the generic fabric TransportID and Target Port WWN naming handlers from TCM's target_core_fabric_lib.c The TCM_Loop module uses the generic fabric configfs infratructure provided by target_core_fabric_configfs.c and adds a module dependent attribute for the creation/release of the virtual I_T Nexus connected the TCM_Loop Target and Initiator Ports. TCM_Loop can also be used with scsi-generic and BSG drivers so that STGT userspace fabric modules, QEMU-KVM and other hypervisor SCSI passthrough support can access TCM device backstore and control CDB emulation. For more information please see: http://linux-iscsi.org/wiki/Tcm_loop [jejb: fixed up checkpatch stuff] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-18 15:39:17 -07:00
[SCSI] target: Add LIO target core v4.0.0-rc6 LIO target is a full featured in-kernel target framework with the following feature set: High-performance, non-blocking, multithreaded architecture with SIMD support. Advanced SCSI feature set: * Persistent Reservations (PRs) * Asymmetric Logical Unit Assignment (ALUA) * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S) * Full Error Recovery (ERL=0,1,2) * Active/active task migration and session continuation (ERL=2) * Thin LUN provisioning (UNMAP and WRITE_SAMExx) Multiprotocol target plugins Storage media independence: * Virtualization of all storage media; transparent mapping of IO to LUNs * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc. Standards compliance: * Full compliance with IETF (RFC 3720) * Full implementation of SPC-4 PRs and ALUA Significant code cleanups done by Christoph Hellwig. [jejb: fix up for new block bdev exclusive interface. Minor fixes from Randy Dunlap and Dan Carpenter.] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 12:11:26 -07:00
endif
Copy Permalink