2010-06-03 22:11:24 -07:00
|
|
|
/*
|
|
|
|
* linux/sound/soc/ep93xx-i2s.c
|
|
|
|
* EP93xx I2S driver
|
|
|
|
*
|
2011-06-14 21:45:36 -07:00
|
|
|
* Copyright (C) 2010 Ryan Mallon
|
2010-06-03 22:11:24 -07:00
|
|
|
*
|
|
|
|
* Based on the original driver by:
|
|
|
|
* Copyright (C) 2007 Chase Douglas <chasedouglas@gmail>
|
|
|
|
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
|
|
|
|
#include <sound/core.h>
|
|
|
|
#include <sound/pcm.h>
|
|
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include <sound/initval.h>
|
|
|
|
#include <sound/soc.h>
|
|
|
|
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/ep93xx-regs.h>
|
|
|
|
#include <mach/dma.h>
|
|
|
|
|
|
|
|
#include "ep93xx-pcm.h"
|
|
|
|
|
|
|
|
#define EP93XX_I2S_TXCLKCFG 0x00
|
|
|
|
#define EP93XX_I2S_RXCLKCFG 0x04
|
|
|
|
#define EP93XX_I2S_GLCTRL 0x0C
|
|
|
|
|
|
|
|
#define EP93XX_I2S_TXLINCTRLDATA 0x28
|
|
|
|
#define EP93XX_I2S_TXCTRL 0x2C
|
|
|
|
#define EP93XX_I2S_TXWRDLEN 0x30
|
|
|
|
#define EP93XX_I2S_TX0EN 0x34
|
|
|
|
|
|
|
|
#define EP93XX_I2S_RXLINCTRLDATA 0x58
|
|
|
|
#define EP93XX_I2S_RXCTRL 0x5C
|
|
|
|
#define EP93XX_I2S_RXWRDLEN 0x60
|
|
|
|
#define EP93XX_I2S_RX0EN 0x64
|
|
|
|
|
|
|
|
#define EP93XX_I2S_WRDLEN_16 (0 << 0)
|
|
|
|
#define EP93XX_I2S_WRDLEN_24 (1 << 0)
|
|
|
|
#define EP93XX_I2S_WRDLEN_32 (2 << 0)
|
|
|
|
|
|
|
|
#define EP93XX_I2S_LINCTRLDATA_R_JUST (1 << 2) /* Right justify */
|
|
|
|
|
|
|
|
#define EP93XX_I2S_CLKCFG_LRS (1 << 0) /* lrclk polarity */
|
|
|
|
#define EP93XX_I2S_CLKCFG_CKP (1 << 1) /* Bit clock polarity */
|
|
|
|
#define EP93XX_I2S_CLKCFG_REL (1 << 2) /* First bit transition */
|
|
|
|
#define EP93XX_I2S_CLKCFG_MASTER (1 << 3) /* Master mode */
|
|
|
|
#define EP93XX_I2S_CLKCFG_NBCG (1 << 4) /* Not bit clock gating */
|
|
|
|
|
|
|
|
struct ep93xx_i2s_info {
|
|
|
|
struct clk *mclk;
|
|
|
|
struct clk *sclk;
|
|
|
|
struct clk *lrclk;
|
|
|
|
struct ep93xx_pcm_dma_params *dma_params;
|
|
|
|
struct resource *mem;
|
|
|
|
void __iomem *regs;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ep93xx_pcm_dma_params ep93xx_i2s_dma_params[] = {
|
|
|
|
[SNDRV_PCM_STREAM_PLAYBACK] = {
|
|
|
|
.name = "i2s-pcm-out",
|
2011-05-29 03:10:04 -07:00
|
|
|
.dma_port = EP93XX_DMA_I2S1,
|
2010-06-03 22:11:24 -07:00
|
|
|
},
|
|
|
|
[SNDRV_PCM_STREAM_CAPTURE] = {
|
|
|
|
.name = "i2s-pcm-in",
|
2011-05-29 03:10:04 -07:00
|
|
|
.dma_port = EP93XX_DMA_I2S1,
|
2010-06-03 22:11:24 -07:00
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline void ep93xx_i2s_write_reg(struct ep93xx_i2s_info *info,
|
|
|
|
unsigned reg, unsigned val)
|
|
|
|
{
|
|
|
|
__raw_writel(val, info->regs + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned ep93xx_i2s_read_reg(struct ep93xx_i2s_info *info,
|
|
|
|
unsigned reg)
|
|
|
|
{
|
|
|
|
return __raw_readl(info->regs + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
|
|
|
|
{
|
|
|
|
unsigned base_reg;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
|
|
|
|
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
|
|
|
|
/* Enable clocks */
|
|
|
|
clk_enable(info->mclk);
|
|
|
|
clk_enable(info->sclk);
|
|
|
|
clk_enable(info->lrclk);
|
|
|
|
|
|
|
|
/* Enable i2s */
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable fifos */
|
|
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
|
|
base_reg = EP93XX_I2S_TX0EN;
|
|
|
|
else
|
|
|
|
base_reg = EP93XX_I2S_RX0EN;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
|
|
ep93xx_i2s_write_reg(info, base_reg + (i * 4), 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
|
|
|
|
{
|
|
|
|
unsigned base_reg;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Disable fifos */
|
|
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
|
|
base_reg = EP93XX_I2S_TX0EN;
|
|
|
|
else
|
|
|
|
base_reg = EP93XX_I2S_RX0EN;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
|
|
ep93xx_i2s_write_reg(info, base_reg + (i * 4), 0);
|
|
|
|
|
|
|
|
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
|
|
|
|
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
|
|
|
|
/* Disable i2s */
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 0);
|
|
|
|
|
|
|
|
/* Disable clocks */
|
|
|
|
clk_disable(info->lrclk);
|
|
|
|
clk_disable(info->sclk);
|
|
|
|
clk_disable(info->mclk);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_i2s_startup(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_soc_dai *dai)
|
|
|
|
{
|
|
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
|
|
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream,
|
|
|
|
&info->dma_params[substream->stream]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep93xx_i2s_shutdown(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_soc_dai *dai)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
ep93xx_i2s_disable(info, substream->stream);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
|
|
unsigned int fmt)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(cpu_dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
unsigned int clk_cfg, lin_ctrl;
|
|
|
|
|
|
|
|
clk_cfg = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXCLKCFG);
|
|
|
|
lin_ctrl = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXLINCTRLDATA);
|
|
|
|
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
|
|
clk_cfg |= EP93XX_I2S_CLKCFG_REL;
|
|
|
|
lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
|
|
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
|
|
|
|
lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
|
|
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
|
|
|
|
lin_ctrl |= EP93XX_I2S_LINCTRLDATA_R_JUST;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
|
|
/* CPU is master */
|
|
|
|
clk_cfg |= EP93XX_I2S_CLKCFG_MASTER;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
|
|
/* Codec is master */
|
|
|
|
clk_cfg &= ~EP93XX_I2S_CLKCFG_MASTER;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
|
|
/* Negative bit clock, lrclk low on left word */
|
|
|
|
clk_cfg &= ~(EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
|
|
/* Negative bit clock, lrclk low on right word */
|
|
|
|
clk_cfg &= ~EP93XX_I2S_CLKCFG_CKP;
|
|
|
|
clk_cfg |= EP93XX_I2S_CLKCFG_REL;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
|
|
/* Positive bit clock, lrclk low on left word */
|
|
|
|
clk_cfg |= EP93XX_I2S_CLKCFG_CKP;
|
|
|
|
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
|
|
/* Positive bit clock, lrclk low on right word */
|
|
|
|
clk_cfg |= EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Write new register values */
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXCLKCFG, clk_cfg);
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXCLKCFG, clk_cfg);
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXLINCTRLDATA, lin_ctrl);
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXLINCTRLDATA, lin_ctrl);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_i2s_hw_params(struct snd_pcm_substream *substream,
|
|
|
|
struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_soc_dai *dai)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
unsigned word_len, div, sdiv, lrdiv;
|
2011-03-07 10:30:36 -07:00
|
|
|
int err;
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
switch (params_format(params)) {
|
|
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
|
|
word_len = EP93XX_I2S_WRDLEN_16;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
|
|
word_len = EP93XX_I2S_WRDLEN_24;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
|
|
word_len = EP93XX_I2S_WRDLEN_32;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXWRDLEN, word_len);
|
|
|
|
else
|
|
|
|
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXWRDLEN, word_len);
|
|
|
|
|
|
|
|
/*
|
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code
Changelog:
1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is
hardware limitation and that's the way original Cirrus's driver worked.
This will fix distorted sound playback and make capture actually work in
present ep93xx drivers.
I've found, that author of code, on which modern ep93xx-i2s.c and
ep93xx-pcm.c are based, had faced this problem also in 2007:
http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3
Now SoC code uses his developments, but not overcomes the hardware
issues. Some details from EP93xx users guide:
Both I2S transmitter and receiver have similar 16x32bit FIFO, where they
store 8 samples for both left and right channels. The FIFO is always
32bit wide and should be properly aligned if you use samples of other
width. Transmitter and receiver have configuration registers for
selection of I2S word length (16, 24, 32). They are I2STXWrdLen and
I2SRXWrdLen.
Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for
transfers to and from peripherals is selected by particular module
configuration. Lucky AC97 module has such configuration: AC97RXCRx
registers, bit CM (Compact mode enable) switches between 16 and 32 bit
samples. AC97TXCRx registers have the same bits for transmitters.
ep93xx-ac97.c enables this compact mode and so has all the rights to use
S16_LE format.
No one has found such a configuration in I2S module until now in any
Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit
samples consecutively for left and right channels. You cannot use 32-bit
DMA transfers to transfer two 16-bit samples.
So we can use two formats for AC97, but should remove all but S32_LE for
I2S. Always using 32 bit chunks is not a problem for I2S, the codec I
use uses less bits too (24), it's permitted by I2S standard.
In proposed patch formats list shortened to just S32_LE, this makes all
the DMA transactions right, while ALSA will do all sample format
translation for us.
2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c
masks the first problem.
DMA takes two 16 bit samples instead of one, overall sound speed seems
to be normal, but you get actually 4000 sampling rate instead of
requested 8000 and therefore some noise... This is also the reason why
the capture function not worked at all in this driver...
If we take a look into I2S specification, we will figure that LRCLK MUST
be equal to sample rate, if we are talking about stereo (in mono too,
but it's not our case at all).
In proposed patch SCLK and LRCLK rates are corrected, assuming we always
send 32 bits * 2 channels to codec.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 05:48:05 -07:00
|
|
|
* EP93xx I2S module can be setup so SCLK / LRCLK value can be
|
|
|
|
* 32, 64, 128. MCLK / SCLK value can be 2 and 4.
|
|
|
|
* We set LRCLK equal to `rate' and minimum SCLK / LRCLK
|
|
|
|
* value is 64, because our sample size is 32 bit * 2 channels.
|
|
|
|
* I2S standard permits us to transmit more bits than
|
|
|
|
* the codec uses.
|
2010-06-03 22:11:24 -07:00
|
|
|
*/
|
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code
Changelog:
1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is
hardware limitation and that's the way original Cirrus's driver worked.
This will fix distorted sound playback and make capture actually work in
present ep93xx drivers.
I've found, that author of code, on which modern ep93xx-i2s.c and
ep93xx-pcm.c are based, had faced this problem also in 2007:
http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3
Now SoC code uses his developments, but not overcomes the hardware
issues. Some details from EP93xx users guide:
Both I2S transmitter and receiver have similar 16x32bit FIFO, where they
store 8 samples for both left and right channels. The FIFO is always
32bit wide and should be properly aligned if you use samples of other
width. Transmitter and receiver have configuration registers for
selection of I2S word length (16, 24, 32). They are I2STXWrdLen and
I2SRXWrdLen.
Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for
transfers to and from peripherals is selected by particular module
configuration. Lucky AC97 module has such configuration: AC97RXCRx
registers, bit CM (Compact mode enable) switches between 16 and 32 bit
samples. AC97TXCRx registers have the same bits for transmitters.
ep93xx-ac97.c enables this compact mode and so has all the rights to use
S16_LE format.
No one has found such a configuration in I2S module until now in any
Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit
samples consecutively for left and right channels. You cannot use 32-bit
DMA transfers to transfer two 16-bit samples.
So we can use two formats for AC97, but should remove all but S32_LE for
I2S. Always using 32 bit chunks is not a problem for I2S, the codec I
use uses less bits too (24), it's permitted by I2S standard.
In proposed patch formats list shortened to just S32_LE, this makes all
the DMA transactions right, while ALSA will do all sample format
translation for us.
2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c
masks the first problem.
DMA takes two 16 bit samples instead of one, overall sound speed seems
to be normal, but you get actually 4000 sampling rate instead of
requested 8000 and therefore some noise... This is also the reason why
the capture function not worked at all in this driver...
If we take a look into I2S specification, we will figure that LRCLK MUST
be equal to sample rate, if we are talking about stereo (in mono too,
but it's not our case at all).
In proposed patch SCLK and LRCLK rates are corrected, assuming we always
send 32 bits * 2 channels to codec.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 05:48:05 -07:00
|
|
|
div = clk_get_rate(info->mclk) / params_rate(params);
|
2011-03-07 10:30:36 -07:00
|
|
|
sdiv = 4;
|
|
|
|
if (div > (256 + 512) / 2) {
|
|
|
|
lrdiv = 128;
|
|
|
|
} else {
|
|
|
|
lrdiv = 64;
|
|
|
|
if (div < (128 + 256) / 2)
|
|
|
|
sdiv = 2;
|
|
|
|
}
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
err = clk_set_rate(info->sclk, clk_get_rate(info->mclk) / sdiv);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = clk_set_rate(info->lrclk, clk_get_rate(info->sclk) / lrdiv);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
ep93xx_i2s_enable(info, substream->stream);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
|
|
|
|
unsigned int freq, int dir)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(cpu_dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
if (dir == SND_SOC_CLOCK_IN || clk_id != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return clk_set_rate(info->mclk, freq);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int ep93xx_i2s_suspend(struct snd_soc_dai *dai)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
if (!dai->active)
|
2011-03-07 10:29:58 -07:00
|
|
|
return 0;
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_PLAYBACK);
|
|
|
|
ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_CAPTURE);
|
2011-03-07 10:29:58 -07:00
|
|
|
|
|
|
|
return 0;
|
2010-06-03 22:11:24 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ep93xx_i2s_resume(struct snd_soc_dai *dai)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
if (!dai->active)
|
2011-03-07 10:29:58 -07:00
|
|
|
return 0;
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_PLAYBACK);
|
|
|
|
ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_CAPTURE);
|
2011-03-07 10:29:58 -07:00
|
|
|
|
|
|
|
return 0;
|
2010-06-03 22:11:24 -07:00
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define ep93xx_i2s_suspend NULL
|
|
|
|
#define ep93xx_i2s_resume NULL
|
|
|
|
#endif
|
|
|
|
|
2011-11-23 03:40:40 -07:00
|
|
|
static const struct snd_soc_dai_ops ep93xx_i2s_dai_ops = {
|
2010-06-03 22:11:24 -07:00
|
|
|
.startup = ep93xx_i2s_startup,
|
|
|
|
.shutdown = ep93xx_i2s_shutdown,
|
|
|
|
.hw_params = ep93xx_i2s_hw_params,
|
|
|
|
.set_sysclk = ep93xx_i2s_set_sysclk,
|
|
|
|
.set_fmt = ep93xx_i2s_set_dai_fmt,
|
|
|
|
};
|
|
|
|
|
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code
Changelog:
1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is
hardware limitation and that's the way original Cirrus's driver worked.
This will fix distorted sound playback and make capture actually work in
present ep93xx drivers.
I've found, that author of code, on which modern ep93xx-i2s.c and
ep93xx-pcm.c are based, had faced this problem also in 2007:
http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3
Now SoC code uses his developments, but not overcomes the hardware
issues. Some details from EP93xx users guide:
Both I2S transmitter and receiver have similar 16x32bit FIFO, where they
store 8 samples for both left and right channels. The FIFO is always
32bit wide and should be properly aligned if you use samples of other
width. Transmitter and receiver have configuration registers for
selection of I2S word length (16, 24, 32). They are I2STXWrdLen and
I2SRXWrdLen.
Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for
transfers to and from peripherals is selected by particular module
configuration. Lucky AC97 module has such configuration: AC97RXCRx
registers, bit CM (Compact mode enable) switches between 16 and 32 bit
samples. AC97TXCRx registers have the same bits for transmitters.
ep93xx-ac97.c enables this compact mode and so has all the rights to use
S16_LE format.
No one has found such a configuration in I2S module until now in any
Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit
samples consecutively for left and right channels. You cannot use 32-bit
DMA transfers to transfer two 16-bit samples.
So we can use two formats for AC97, but should remove all but S32_LE for
I2S. Always using 32 bit chunks is not a problem for I2S, the codec I
use uses less bits too (24), it's permitted by I2S standard.
In proposed patch formats list shortened to just S32_LE, this makes all
the DMA transactions right, while ALSA will do all sample format
translation for us.
2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c
masks the first problem.
DMA takes two 16 bit samples instead of one, overall sound speed seems
to be normal, but you get actually 4000 sampling rate instead of
requested 8000 and therefore some noise... This is also the reason why
the capture function not worked at all in this driver...
If we take a look into I2S specification, we will figure that LRCLK MUST
be equal to sample rate, if we are talking about stereo (in mono too,
but it's not our case at all).
In proposed patch SCLK and LRCLK rates are corrected, assuming we always
send 32 bits * 2 channels to codec.
Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 05:48:05 -07:00
|
|
|
#define EP93XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S32_LE)
|
2010-06-03 22:11:24 -07:00
|
|
|
|
2010-03-17 13:15:21 -07:00
|
|
|
static struct snd_soc_dai_driver ep93xx_i2s_dai = {
|
2010-06-03 22:11:24 -07:00
|
|
|
.symmetric_rates= 1,
|
|
|
|
.suspend = ep93xx_i2s_suspend,
|
|
|
|
.resume = ep93xx_i2s_resume,
|
|
|
|
.playback = {
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
2011-03-07 10:30:12 -07:00
|
|
|
.rates = SNDRV_PCM_RATE_8000_192000,
|
2010-06-03 22:11:24 -07:00
|
|
|
.formats = EP93XX_I2S_FORMATS,
|
|
|
|
},
|
|
|
|
.capture = {
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
2011-03-07 10:30:12 -07:00
|
|
|
.rates = SNDRV_PCM_RATE_8000_192000,
|
2010-06-03 22:11:24 -07:00
|
|
|
.formats = EP93XX_I2S_FORMATS,
|
|
|
|
},
|
|
|
|
.ops = &ep93xx_i2s_dai_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ep93xx_i2s_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct ep93xx_i2s_info *info;
|
|
|
|
struct resource *res;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
info = kzalloc(sizeof(struct ep93xx_i2s_info), GFP_KERNEL);
|
|
|
|
if (!info) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
2010-03-17 13:15:21 -07:00
|
|
|
dev_set_drvdata(&pdev->dev, info);
|
2010-06-03 22:11:24 -07:00
|
|
|
info->dma_params = ep93xx_i2s_dma_params;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
err = -ENODEV;
|
2011-08-19 23:12:39 -07:00
|
|
|
goto fail_free_info;
|
2010-06-03 22:11:24 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
info->mem = request_mem_region(res->start, resource_size(res),
|
|
|
|
pdev->name);
|
|
|
|
if (!info->mem) {
|
|
|
|
err = -EBUSY;
|
2011-08-19 23:12:39 -07:00
|
|
|
goto fail_free_info;
|
2010-06-03 22:11:24 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
info->regs = ioremap(info->mem->start, resource_size(info->mem));
|
|
|
|
if (!info->regs) {
|
|
|
|
err = -ENXIO;
|
|
|
|
goto fail_release_mem;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->mclk = clk_get(&pdev->dev, "mclk");
|
|
|
|
if (IS_ERR(info->mclk)) {
|
|
|
|
err = PTR_ERR(info->mclk);
|
|
|
|
goto fail_unmap_mem;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->sclk = clk_get(&pdev->dev, "sclk");
|
|
|
|
if (IS_ERR(info->sclk)) {
|
|
|
|
err = PTR_ERR(info->sclk);
|
|
|
|
goto fail_put_mclk;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->lrclk = clk_get(&pdev->dev, "lrclk");
|
|
|
|
if (IS_ERR(info->lrclk)) {
|
|
|
|
err = PTR_ERR(info->lrclk);
|
|
|
|
goto fail_put_sclk;
|
|
|
|
}
|
|
|
|
|
2010-03-17 13:15:21 -07:00
|
|
|
err = snd_soc_register_dai(&pdev->dev, &ep93xx_i2s_dai);
|
2010-06-03 22:11:24 -07:00
|
|
|
if (err)
|
|
|
|
goto fail_put_lrclk;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail_put_lrclk:
|
|
|
|
clk_put(info->lrclk);
|
|
|
|
fail_put_sclk:
|
|
|
|
clk_put(info->sclk);
|
|
|
|
fail_put_mclk:
|
|
|
|
clk_put(info->mclk);
|
|
|
|
fail_unmap_mem:
|
|
|
|
iounmap(info->regs);
|
|
|
|
fail_release_mem:
|
|
|
|
release_mem_region(info->mem->start, resource_size(info->mem));
|
2011-08-19 23:12:39 -07:00
|
|
|
fail_free_info:
|
2010-06-03 22:11:24 -07:00
|
|
|
kfree(info);
|
|
|
|
fail:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit ep93xx_i2s_remove(struct platform_device *pdev)
|
|
|
|
{
|
2010-03-17 13:15:21 -07:00
|
|
|
struct ep93xx_i2s_info *info = dev_get_drvdata(&pdev->dev);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
2010-03-17 13:15:21 -07:00
|
|
|
snd_soc_unregister_dai(&pdev->dev);
|
2010-06-03 22:11:24 -07:00
|
|
|
clk_put(info->lrclk);
|
|
|
|
clk_put(info->sclk);
|
|
|
|
clk_put(info->mclk);
|
|
|
|
iounmap(info->regs);
|
|
|
|
release_mem_region(info->mem->start, resource_size(info->mem));
|
|
|
|
kfree(info);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver ep93xx_i2s_driver = {
|
|
|
|
.probe = ep93xx_i2s_probe,
|
|
|
|
.remove = __devexit_p(ep93xx_i2s_remove),
|
|
|
|
.driver = {
|
|
|
|
.name = "ep93xx-i2s",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2011-11-23 21:07:55 -07:00
|
|
|
module_platform_driver(ep93xx_i2s_driver);
|
2010-06-03 22:11:24 -07:00
|
|
|
|
|
|
|
MODULE_ALIAS("platform:ep93xx-i2s");
|
2011-06-14 21:45:36 -07:00
|
|
|
MODULE_AUTHOR("Ryan Mallon");
|
2010-06-03 22:11:24 -07:00
|
|
|
MODULE_DESCRIPTION("EP93XX I2S driver");
|
|
|
|
MODULE_LICENSE("GPL");
|