1
linux/drivers/input/touchscreen/da9034-ts.c

388 lines
8.7 KiB
C
Raw Normal View History

/*
* Touchscreen driver for Dialog Semiconductor DA9034
*
* Copyright (C) 2006-2008 Marvell International Ltd.
* Fengwei Yin <fengwei.yin@marvell.com>
* Bin Yang <bin.yang@marvell.com>
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/mfd/da903x.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 01:04:11 -07:00
#include <linux/slab.h>
#define DA9034_MANUAL_CTRL 0x50
#define DA9034_LDO_ADC_EN (1 << 4)
#define DA9034_AUTO_CTRL1 0x51
#define DA9034_AUTO_CTRL2 0x52
#define DA9034_AUTO_TSI_EN (1 << 3)
#define DA9034_PEN_DETECT (1 << 4)
#define DA9034_TSI_CTRL1 0x53
#define DA9034_TSI_CTRL2 0x54
#define DA9034_TSI_X_MSB 0x6c
#define DA9034_TSI_Y_MSB 0x6d
#define DA9034_TSI_XY_LSB 0x6e
enum {
STATE_IDLE, /* wait for pendown */
STATE_BUSY, /* TSI busy sampling */
STATE_STOP, /* sample available */
STATE_WAIT, /* Wait to start next sample */
};
enum {
EVENT_PEN_DOWN,
EVENT_PEN_UP,
EVENT_TSI_READY,
EVENT_TIMEDOUT,
};
struct da9034_touch {
struct device *da9034_dev;
struct input_dev *input_dev;
struct delayed_work tsi_work;
struct notifier_block notifier;
int state;
int interval_ms;
int x_inverted;
int y_inverted;
int last_x;
int last_y;
};
static inline int is_pen_down(struct da9034_touch *touch)
{
return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN);
}
static inline int detect_pen_down(struct da9034_touch *touch, int on)
{
if (on)
return da903x_set_bits(touch->da9034_dev,
DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
else
return da903x_clr_bits(touch->da9034_dev,
DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
}
static int read_tsi(struct da9034_touch *touch)
{
uint8_t _x, _y, _v;
int ret;
ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x);
if (ret)
return ret;
ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y);
if (ret)
return ret;
ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v);
if (ret)
return ret;
touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3);
touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2);
return 0;
}
static inline int start_tsi(struct da9034_touch *touch)
{
return da903x_set_bits(touch->da9034_dev,
DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
}
static inline int stop_tsi(struct da9034_touch *touch)
{
return da903x_clr_bits(touch->da9034_dev,
DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
}
static inline void report_pen_down(struct da9034_touch *touch)
{
int x = touch->last_x;
int y = touch->last_y;
x &= 0xfff;
if (touch->x_inverted)
x = 1024 - x;
y &= 0xfff;
if (touch->y_inverted)
y = 1024 - y;
input_report_abs(touch->input_dev, ABS_X, x);
input_report_abs(touch->input_dev, ABS_Y, y);
input_report_key(touch->input_dev, BTN_TOUCH, 1);
input_sync(touch->input_dev);
}
static inline void report_pen_up(struct da9034_touch *touch)
{
input_report_key(touch->input_dev, BTN_TOUCH, 0);
input_sync(touch->input_dev);
}
static void da9034_event_handler(struct da9034_touch *touch, int event)
{
int err;
switch (touch->state) {
case STATE_IDLE:
if (event != EVENT_PEN_DOWN)
break;
/* Enable auto measurement of the TSI, this will
* automatically disable pen down detection
*/
err = start_tsi(touch);
if (err)
goto err_reset;
touch->state = STATE_BUSY;
break;
case STATE_BUSY:
if (event != EVENT_TSI_READY)
break;
err = read_tsi(touch);
if (err)
goto err_reset;
/* Disable auto measurement of the TSI, so that
* pen down status will be available
*/
err = stop_tsi(touch);
if (err)
goto err_reset;
touch->state = STATE_STOP;
/* FIXME: PEN_{UP/DOWN} events are expected to be
* available by stopping TSI, but this is found not
* always true, delay and simulate such an event
* here is more reliable
*/
mdelay(1);
da9034_event_handler(touch,
is_pen_down(touch) ? EVENT_PEN_DOWN :
EVENT_PEN_UP);
break;
case STATE_STOP:
if (event == EVENT_PEN_DOWN) {
report_pen_down(touch);
schedule_delayed_work(&touch->tsi_work,
msecs_to_jiffies(touch->interval_ms));
touch->state = STATE_WAIT;
}
if (event == EVENT_PEN_UP) {
report_pen_up(touch);
touch->state = STATE_IDLE;
}
break;
case STATE_WAIT:
if (event != EVENT_TIMEDOUT)
break;
if (is_pen_down(touch)) {
start_tsi(touch);
touch->state = STATE_BUSY;
} else {
report_pen_up(touch);
touch->state = STATE_IDLE;
}
break;
}
return;
err_reset:
touch->state = STATE_IDLE;
stop_tsi(touch);
detect_pen_down(touch, 1);
}
static void da9034_tsi_work(struct work_struct *work)
{
struct da9034_touch *touch =
container_of(work, struct da9034_touch, tsi_work.work);
da9034_event_handler(touch, EVENT_TIMEDOUT);
}
static int da9034_touch_notifier(struct notifier_block *nb,
unsigned long event, void *data)
{
struct da9034_touch *touch =
container_of(nb, struct da9034_touch, notifier);
if (event & DA9034_EVENT_TSI_READY)
da9034_event_handler(touch, EVENT_TSI_READY);
if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
da9034_event_handler(touch, EVENT_PEN_DOWN);
return 0;
}
static int da9034_touch_open(struct input_dev *dev)
{
struct da9034_touch *touch = input_get_drvdata(dev);
int ret;
ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier,
DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
if (ret)
return -EBUSY;
/* Enable ADC LDO */
ret = da903x_set_bits(touch->da9034_dev,
DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
if (ret)
return ret;
/* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */
ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b);
if (ret)
return ret;
ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00);
if (ret)
return ret;
touch->state = STATE_IDLE;
detect_pen_down(touch, 1);
return 0;
}
static void da9034_touch_close(struct input_dev *dev)
{
struct da9034_touch *touch = input_get_drvdata(dev);
da903x_unregister_notifier(touch->da9034_dev, &touch->notifier,
DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
cancel_delayed_work_sync(&touch->tsi_work);
touch->state = STATE_IDLE;
stop_tsi(touch);
detect_pen_down(touch, 0);
/* Disable ADC LDO */
da903x_clr_bits(touch->da9034_dev,
DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
}
static int __devinit da9034_touch_probe(struct platform_device *pdev)
{
struct da9034_touch_pdata *pdata = pdev->dev.platform_data;
struct da9034_touch *touch;
struct input_dev *input_dev;
int ret;
touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL);
if (touch == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
touch->da9034_dev = pdev->dev.parent;
if (pdata) {
touch->interval_ms = pdata->interval_ms;
touch->x_inverted = pdata->x_inverted;
touch->y_inverted = pdata->y_inverted;
} else
/* fallback into default */
touch->interval_ms = 10;
INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work);
touch->notifier.notifier_call = da9034_touch_notifier;
input_dev = input_allocate_device();
if (!input_dev) {
dev_err(&pdev->dev, "failed to allocate input device\n");
ret = -ENOMEM;
goto err_free_touch;
}
input_dev->name = pdev->name;
input_dev->open = da9034_touch_open;
input_dev->close = da9034_touch_close;
input_dev->dev.parent = &pdev->dev;
__set_bit(EV_ABS, input_dev->evbit);
__set_bit(ABS_X, input_dev->absbit);
__set_bit(ABS_Y, input_dev->absbit);
input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
touch->input_dev = input_dev;
input_set_drvdata(input_dev, touch);
ret = input_register_device(input_dev);
if (ret)
goto err_free_input;
platform_set_drvdata(pdev, touch);
return 0;
err_free_input:
input_free_device(input_dev);
err_free_touch:
kfree(touch);
return ret;
}
static int __devexit da9034_touch_remove(struct platform_device *pdev)
{
struct da9034_touch *touch = platform_get_drvdata(pdev);
input_unregister_device(touch->input_dev);
kfree(touch);
return 0;
}
static struct platform_driver da9034_touch_driver = {
.driver = {
.name = "da9034-touch",
.owner = THIS_MODULE,
},
.probe = da9034_touch_probe,
.remove = __devexit_p(da9034_touch_remove),
};
module_platform_driver(da9034_touch_driver);
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9034-touch");