kevin/linux
1
Fork 0
Code
587f4cae4a
linux/drivers/scsi/qla2xxx/qla_gbl.h

353 lines
12 KiB
C
Raw Normal View History

[SCSI] qla2xxx: Update license. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-27 11:10:08 -07:00
/*
* QLogic Fibre Channel HBA Driver
[SCSI] qla2xxx: Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 13:13:13 -07:00
* Copyright (c) 2003-2008 QLogic Corporation
[SCSI] qla2xxx: Update license. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-27 11:10:08 -07:00
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifndef __QLA_GBL_H
#define __QLA_GBL_H
#include <linux/interrupt.h>
/*
* Global Function Prototypes in qla_init.c source file.
*/
extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern int qla2100_pci_config(struct scsi_qla_host *);
extern int qla2300_pci_config(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern int qla24xx_pci_config(scsi_qla_host_t *);
[SCSI] qla2xxx: Add ISP25XX support. Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19 20:37:34 -07:00
extern int qla25xx_pci_config(scsi_qla_host_t *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern void qla2x00_reset_chip(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern void qla24xx_reset_chip(struct scsi_qla_host *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern int qla2x00_chip_diag(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern int qla24xx_chip_diag(struct scsi_qla_host *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern void qla2x00_config_rings(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern void qla24xx_config_rings(struct scsi_qla_host *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern void qla2x00_reset_adapter(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern void qla24xx_reset_adapter(struct scsi_qla_host *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern int qla2x00_nvram_config(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern int qla24xx_nvram_config(struct scsi_qla_host *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern void qla2x00_update_fw_options(struct scsi_qla_host *);
[SCSI] qla2xxx: Add ISP24xx initialization routines. Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:37 -07:00
extern void qla24xx_update_fw_options(scsi_qla_host_t *);
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables. Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:05 -07:00
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 16:49:04 -07:00
extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int qla2x00_loop_resync(scsi_qla_host_t *);
extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
[SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx. ISP24XX FW does not support Mbx 0x74 ie Login Local Port. Added the equivalent code for ISP24XX ie to relogin in non fabric case for ISP24XX use login iocb. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-09 15:27:44 -07:00
extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SCSI] qla2xxx: Correct synchronization issues during rport addition/deletion. The driver can typically detect port-loss during an interrupt context (i.e. via interrogation of a status IOCB's completion status [CS_PORT_LOGGED_OUT]. Due to the calling requirements of the fc_rport APIs, the driver would defer removal of the device to the default workqueue. If the work-item was preceded by an event which caused the port to obtain visibility (relogin successful, target re-logged into the topology), deferred removal could inadvertently drop the rport. The code also no longer defers removal via the default workqueue, instead opting for use of the driver's own DPC thread. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-20 15:53:13 -07:00
extern void qla2x00_update_fcports(scsi_qla_host_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int qla2x00_abort_isp(scsi_qla_host_t *);
[SCSI] qla2xxx: Correct issue where the rport's upcall was not being made after relogin. A target can LOGO an initiator at any time (i.e. during I/O, due to a controller hicup, or as a simple authentication mechanism after an initial CDB command), when this occurs, the driver attempts to relogin (PLOGI) to the device via the DPC thread. Add code to make the appropriate upcall to the FC transport layer (fc_remote_port_add()) upon successful completion of the PLOGI. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-20 15:53:19 -07:00
extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
[PATCH] qla2xxx: add remote port codes... Add initial support for FC remote port infrastructure. o Use fc_remote_port...() registration and block/unlock functions. o Consolidate 'attribute' (fc-remote/sysfs) helpers into new qla_attr.c file. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17 13:04:54 -07:00
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:29 -07:00
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
[SCSI] qla2xxx: Workaround D3 power-management issues. Early ISP2432 parts have a known hardware issue when coming out of a D3 hot state. This issue can result in a hung PCIe link. Recent firmwares contain a workaround whereby the stop-firmware mailbox command prevents the ISP from entering the D3 hot state. In order to ensure that the workaround succeeded the driver must verify that the stop-firmware mailbox command completes successfully. In the event of a failure, the driver attempts a shutdown-retry after resetting the ISP and re-executing firmware. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-13 09:33:38 -07:00
extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Global Data in qla_os.c source file.
*/
extern char qla2x00_version_str[];
extern int ql2xlogintimeout;
extern int qlport_down_retry;
extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
[SCSI] qla2xxx: Add FDMI support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-26 19:08:30 -07:00
extern int ql2xfdmienable;
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:29 -07:00
extern int ql2xallocfwdump;
[SCSI] Maintain module-parameter name consistency with qla2xxx/qla4xxx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-06 09:54:59 -07:00
extern int ql2xextended_error_logging;
[SCSI] qla2xxx: Correct QUEUE_FULL handling. - Drop queue-depths across all luns for a given fcport during TASK_SET_FULL statuses. - Ramp-up I/Os after throttling. - Consolidate completion-status handling of CS_QUEUE_FULL with CS_COMPLETE as ISP24xx firmware no longer reports CS_QUEUE_FULL. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-13 09:33:39 -07:00
extern int ql2xqfullrampup;
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-05 13:16:51 -07:00
extern int num_hosts;
[SCSI] qla2xxx: Don't schedule the DPC routine to perform an issue-lip request. As the driver depends on the DPC routine to handle bottom-half loop resynchronization in order to recover from the issue-lip request. The issue_lip call is sleeping context capable, so just issue the reset function there. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:12 -07:00
extern int qla2x00_loop_reset(scsi_qla_host_t *);
[SCSI] qla2xxx: Cleanup any outstanding SRB resources during shutdown. Refactor SRB-failure completion codes in the process. Also, signal the DPC routine to complete sooner as backend processing at shutdown-time is superflous. [jejb: resolve conflicts with pci_enable_device_bars removal] Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-31 13:33:46 -07:00
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
[SCSI] qla2xxx: Add FC-transport Asynchronous Event Notification support. Supported events include LIP, LIP reset, RSCN, link up, and link down. To support AEN (and additional forthcoming features), we also introduce a simple deferred-work construct to manage events which require a non-atomic sleeping-capable context. This work-list is processed as part of the driver's standard DPC routine. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 13:13:18 -07:00
extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
fc_host_event_code, u32);
[SCSI] qla2xxx: Add hardware trace-logging support. Recent ISPs have a region within FLASH which acts as a repository for the logging of serious hardware and software failures. Currently, the region is large enough to support up to 255 entries. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 13:13:19 -07:00
extern int qla2x00_post_hwe_work(struct scsi_qla_host *, uint16_t , uint16_t,
uint16_t, uint16_t);
[SCSI] qla2xxx: Don't schedule the DPC routine to perform an issue-lip request. As the driver depends on the DPC routine to handle bottom-half loop resynchronization in order to recover from the issue-lip request. The issue_lip call is sleeping context capable, so just issue the reset function there. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:12 -07:00
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-05 13:16:51 -07:00
/*
* Global Functions in qla_mid.c source file.
*/
extern struct scsi_host_template qla24xx_driver_template;
extern struct scsi_transport_template *qla2xxx_transport_vport_template;
extern void qla2x00_timer(scsi_qla_host_t *);
extern void qla2x00_start_timer(scsi_qla_host_t *, void *, unsigned long);
extern void qla24xx_deallocate_vp_id(scsi_qla_host_t *);
extern int qla24xx_disable_vp (scsi_qla_host_t *);
extern int qla24xx_enable_vp (scsi_qla_host_t *);
extern int qla24xx_control_vp(scsi_qla_host_t *, int );
extern int qla24xx_modify_vp_config(scsi_qla_host_t *);
extern int qla2x00_send_change_request(scsi_qla_host_t *, uint16_t, uint16_t);
extern void qla2x00_vp_stop_timer(scsi_qla_host_t *);
extern int qla24xx_configure_vhba (scsi_qla_host_t *);
extern void qla24xx_report_id_acquisition(scsi_qla_host_t *,
struct vp_rpt_id_entry_24xx *);
extern void qla2x00_do_dpc_all_vps(scsi_qla_host_t *);
extern int qla24xx_vport_create_req_sanity_check(struct fc_vport *);
extern scsi_qla_host_t * qla24xx_create_vhost(struct fc_vport *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] qla2xxx: remove internal queuing... Remove internal command queuing from the driver. As is, this driver cannot tolerate cable-pulls as I/Os will begin to fail by the upper layers. o Should be used in conjuction with the 11-fc_rport_adds_2.diff patch. o Removes qla_listops.h file -- no longer needed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17 13:02:26 -07:00
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *);
[SCSI] qla2xxx: Correct synchronization issues during rport addition/deletion. The driver can typically detect port-loss during an interrupt context (i.e. via interrogation of a status IOCB's completion status [CS_PORT_LOGGED_OUT]. Due to the calling requirements of the fc_rport APIs, the driver would defer removal of the device to the default workqueue. If the work-item was preceded by an event which caused the port to obtain visibility (relogin successful, target re-logged into the topology), deferred removal could inadvertently drop the rport. The code also no longer defers removal via the default workqueue, instead opting for use of the driver's own DPC thread. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-20 15:53:13 -07:00
extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int);
extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 16:49:04 -07:00
extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SCSI] qla2xxx: Add support to retrieve/update HBA option-rom. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:17 -07:00
extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *);
[SCSI] qla2xxx: use kthread_ API Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-14 10:46:22 -07:00
extern void qla2xxx_wake_dpc(scsi_qla_host_t *);
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-05 13:16:51 -07:00
extern void qla2x00_alert_all_vps(scsi_qla_host_t *, uint16_t *);
extern void qla2x00_async_event(scsi_qla_host_t *, uint16_t *);
extern void qla2x00_vp_abort_isp(scsi_qla_host_t *);
[SCSI] qla2xxx: use kthread_ API Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-14 10:46:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Global Function Prototypes in qla_iocb.c source file.
*/
extern uint16_t qla2x00_calc_iocbs_32(uint16_t);
extern uint16_t qla2x00_calc_iocbs_64(uint16_t);
extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
extern void qla2x00_build_scsi_iocbs_64(srb_t *, cmd_entry_t *, uint16_t);
extern int qla2x00_start_scsi(srb_t *sp);
[SCSI] qla2xxx: Add ISP24xx IOCB manipulation routines. Add ISP24xx IOCB manipulation routines. Add appropriate glue-code for ISP24xx support while manipulting IOCB packets. Add an ISP24xx specific 'start_scsi' routine due to command-type-7 layout changes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:17 -07:00
extern int qla24xx_start_scsi(srb_t *sp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int qla2x00_marker(scsi_qla_host_t *, uint16_t, uint16_t, uint8_t);
int __qla2x00_marker(scsi_qla_host_t *, uint16_t, uint16_t, uint8_t);
/*
* Global Function Prototypes in qla_mbx.c source file.
*/
extern int
[SCSI] qla2xxx: Collapse load RISC RAM implementations. Simplify essentially duplicate load RISC RAM implementation in qla2x00_load_ram_ext() and qla2x00_load_ram(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-13 18:05:37 -07:00
qla2x00_load_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SCSI] qla2xxx: Add flash burst-read/write support. Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-20 14:07:33 -07:00
extern int
qla2x00_dump_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void
qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *,
uint16_t *, uint16_t *, uint16_t *, uint32_t *);
extern int
qla2x00_get_fw_options(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_set_fw_options(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_mbx_reg_test(scsi_qla_host_t *);
extern int
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
qla2x00_verify_checksum(scsi_qla_host_t *, uint32_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
extern int
qla2x00_abort_command(scsi_qla_host_t *, srb_t *);
extern int
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
qla2x00_abort_target(fc_port_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-05 13:16:51 -07:00
uint8_t *, uint16_t *, uint16_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
qla2x00_get_retry_cnt(scsi_qla_host_t *, uint8_t *, uint8_t *, uint16_t *);
extern int
qla2x00_init_firmware(scsi_qla_host_t *, uint16_t);
extern int
qla2x00_get_port_database(scsi_qla_host_t *, fc_port_t *, uint8_t);
extern int
qla2x00_get_firmware_state(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t);
extern int
qla2x00_lip_reset(scsi_qla_host_t *);
extern int
qla2x00_send_sns(scsi_qla_host_t *, dma_addr_t, uint16_t, size_t);
extern int
qla2x00_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
uint16_t *, uint8_t);
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
extern int
qla24xx_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
uint16_t *, uint8_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
[SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx. ISP24XX FW does not support Mbx 0x74 ie Login Local Port. Added the equivalent code for ISP24XX ie to relogin in non fabric case for ISP24XX use login iocb. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-09 15:27:44 -07:00
qla2x00_login_local_device(scsi_qla_host_t *, fc_port_t *, uint16_t *,
uint8_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
qla2x00_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
extern int
qla24xx_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
qla2x00_full_login_lip(scsi_qla_host_t *ha);
extern int
qla2x00_get_id_list(scsi_qla_host_t *, void *, dma_addr_t, uint16_t *);
extern int
[SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-20 14:07:43 -07:00
qla2x00_get_resource_cnts(scsi_qla_host_t *, uint16_t *, uint16_t *,
uint16_t *, uint16_t *, uint16_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int
qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
[SCSI] qla2xxx: Add host-statistics FC transport attributes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:02 -07:00
extern int
[SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs. HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:08 -07:00
qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, struct link_statistics *,
dma_addr_t);
[SCSI] qla2xxx: Add host-statistics FC transport attributes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:02 -07:00
extern int
[SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs. HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:08 -07:00
qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
dma_addr_t);
[SCSI] qla2xxx: Add host-statistics FC transport attributes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:02 -07:00
[SCSI] qla2xxx: Add MBX command routines for ISP24xx support. Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:57 -07:00
extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *);
extern int qla24xx_abort_target(fc_port_t *);
extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
[SCSI] qla2xxx: Stop firmware execution at unintialization time. On ISP24xx parts, stop execution of firmware during ISP tear-down. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-26 19:10:20 -07:00
extern int
qla2x00_stop_firmware(scsi_qla_host_t *);
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:29 -07:00
extern int
[SCSI] qla2xxx: Trace-Control naming cleanups. In preparation for FCE (Fibre Channel Event) tracing support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:16 -07:00
qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t);
extern int
qla2x00_disable_eft_trace(scsi_qla_host_t *);
[SCSI] qla2xxx: Rework firmware-trace facilities. - Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:29 -07:00
[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support. FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:17 -07:00
extern int
qla2x00_enable_fce_trace(scsi_qla_host_t *, dma_addr_t, uint16_t , uint16_t *,
uint32_t *);
extern int
qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
[SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23 16:10:50 -07:00
extern int
qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
[SCSI] qla2xxx: Add iIDMA support. iIDMA (Intelligent Interleaved Direct Memory Access) allows for the HBA hardware to send FC frames at the rate at which they can be received by a target device. By taking advantage of the higher link rate, the HBA can maximize bandwidth utilization in a heterogeneous multi-speed SAN. Within a fabric topology, port speed detection is done via a Name Server command (GFPN_ID) followed by a Fabric Management command (GPSC). In an FCAL/N2N topology, port speed is based on the HBA link-rate. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 12:00:43 -07:00
extern int
qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Global Function Prototypes in qla_isr.c source file.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 06:55:46 -07:00
extern irqreturn_t qla2100_intr_handler(int, void *);
extern irqreturn_t qla2300_intr_handler(int, void *);
extern irqreturn_t qla24xx_intr_handler(int, void *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void qla2x00_process_response_queue(struct scsi_qla_host *);
[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO. ISP23xx and ISP24xx chips have support for an adaptive method of posting SCSI command completions for multiple SCSI commands during a single system interrupt. SCSI commands are placed on the system response queue without interrupting the host until 1) a delay timer expires; or 2) a SCSI command completes with an error. As long as the host software (qla2xxx) services the response queue for completions (this polling is done during queuecommand()) within the 'delay timer' period, the firmware will not generate system interrupt. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-27 11:09:48 -07:00
extern void qla24xx_process_response_queue(struct scsi_qla_host *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SCSI] qla2xxx: Add MSI-X support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-29 11:22:19 -07:00
extern int qla2x00_request_irqs(scsi_qla_host_t *);
extern void qla2x00_free_irqs(scsi_qla_host_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Global Function Prototypes in qla_sup.c source file.
*/
extern void qla2x00_release_nvram_protection(scsi_qla_host_t *);
[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines. Add ISP24xx flash-manipulation routines. Add read/write flash manipulation routines for the ISP24xx. Update sysfs NVRAM objects to use generalized accessor functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:07 -07:00
extern uint32_t *qla24xx_read_flash_data(scsi_qla_host_t *, uint32_t *,
uint32_t, uint32_t);
extern uint8_t *qla2x00_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
extern uint8_t *qla24xx_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
extern int qla2x00_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
extern int qla24xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
[SCSI] qla2xxx: Add ISP25XX support. Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19 20:37:34 -07:00
extern uint8_t *qla25xx_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
extern int qla25xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines. Add ISP24xx flash-manipulation routines. Add read/write flash manipulation routines for the ISP24xx. Update sysfs NVRAM objects to use generalized accessor functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:31:07 -07:00
[SCSI] qla2xxx: Add beacon support via class-device attribute. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:07 -07:00
extern int qla2x00_beacon_on(struct scsi_qla_host *);
extern int qla2x00_beacon_off(struct scsi_qla_host *);
extern void qla2x00_beacon_blink(struct scsi_qla_host *);
extern int qla24xx_beacon_on(struct scsi_qla_host *);
extern int qla24xx_beacon_off(struct scsi_qla_host *);
extern void qla24xx_beacon_blink(struct scsi_qla_host *);
[SCSI] qla2xxx: Add support to retrieve/update HBA option-rom. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:17 -07:00
extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
extern int qla2x00_write_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
extern uint8_t *qla24xx_read_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
[SCSI] qla2xxx: Add flash burst-read/write support. Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-20 14:07:33 -07:00
extern uint8_t *qla25xx_read_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
[SCSI] qla2xxx: Add support to retrieve/update HBA option-rom. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 17:05:17 -07:00
[SCSI] qla2xxx: Export OptionROM boot-codes version information. This includes BIOS, EFI, FCODE and firmware versions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-29 11:22:21 -07:00
extern int qla2x00_get_flash_version(scsi_qla_host_t *, void *);
extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *);
[SCSI] qla2xxx: Add hardware trace-logging support. Recent ISPs have a region within FLASH which acts as a repository for the logging of serious hardware and software failures. Currently, the region is large enough to support up to 255 entries. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 13:13:19 -07:00
extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t,
uint16_t, uint16_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Global Function Prototypes in qla_dbg.c source file.
*/
extern void qla2100_fw_dump(scsi_qla_host_t *, int);
extern void qla2300_fw_dump(scsi_qla_host_t *, int);
[SCSI] qla2xxx: Add ISP24xx diagnostic routines. Add ISP24xx diagnostic routines. Add function and structure definitions for the ISP24xx diagnostic firmware dump routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:36 -07:00
extern void qla24xx_fw_dump(scsi_qla_host_t *, int);
[SCSI] qla2xxx: Add ISP25XX support. Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19 20:37:34 -07:00
extern void qla25xx_fw_dump(scsi_qla_host_t *, int);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void qla2x00_dump_regs(scsi_qla_host_t *);
extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
/*
* Global Function Prototypes in qla_gs.c source file.
*/
[SCSI] qla2xxx: Generalize SNS generic-services routines. Generalize SNS generic-services routines. Consolidate completion-status checking while adding support for the ISP24xx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-06 10:30:47 -07:00
extern void *qla2x00_prep_ms_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern void *qla24xx_prep_ms_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int qla2x00_ga_nxt(scsi_qla_host_t *, fc_port_t *);
extern int qla2x00_gid_pt(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gpn_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gnn_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_rft_id(scsi_qla_host_t *);
extern int qla2x00_rff_id(scsi_qla_host_t *);
extern int qla2x00_rnn_id(scsi_qla_host_t *);
extern int qla2x00_rsnn_nn(scsi_qla_host_t *);
[SCSI] qla2xxx: Add FDMI support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-26 19:08:30 -07:00
extern void *qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla2x00_fdmi_register(scsi_qla_host_t *);
[SCSI] qla2xxx: Add iIDMA support. iIDMA (Intelligent Interleaved Direct Memory Access) allows for the HBA hardware to send FC frames at the rate at which they can be received by a target device. By taking advantage of the higher link rate, the HBA can maximize bandwidth utilization in a heterogeneous multi-speed SAN. Within a fabric topology, port speed detection is done via a Name Server command (GFPN_ID) followed by a Fabric Management command (GPSC). In an FCAL/N2N topology, port speed is based on the HBA link-rate. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 12:00:43 -07:00
extern int qla2x00_gfpn_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gpsc(scsi_qla_host_t *, sw_info_t *);
[SCSI] qla2xxx: Add support for symbolic nodename FC transport attribute. Refactored original code from qla_gs.c:qla2x00_rsnn_nn(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 12:00:44 -07:00
extern void qla2x00_get_sym_node_name(scsi_qla_host_t *, uint8_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] qla2xxx: add remote port codes... Add initial support for FC remote port infrastructure. o Use fc_remote_port...() registration and block/unlock functions. o Consolidate 'attribute' (fc-remote/sysfs) helpers into new qla_attr.c file. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17 13:04:54 -07:00
/*
* Global Function Prototypes in qla_attr.c source file.
*/
[SCSI] qla2xxx: Add host attributes. Export additional host information via the shost_attrs member in the scsi_host template. Attributes include: driver version, firmware version, ISP serial number, ISP type, ISP product ID, HBA model name, HBA model description, PCI interconnect information, and HBA port state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-26 19:09:40 -07:00
struct class_device_attribute;
extern struct class_device_attribute *qla2x00_host_attrs[];
[SCSI] qla2xxx: remove a transport #include Make transport-functions structure non-static. Replace #include of scsi_transport.h with a forward declaration. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-21 13:13:36 -07:00
struct fc_function_template;
extern struct fc_function_template qla2xxx_transport_functions;
[SCSI] qla2xxx: add support for NPIV Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-05 13:16:51 -07:00
extern struct fc_function_template qla2xxx_transport_vport_functions;
[PATCH] qla2xxx: add remote port codes... Add initial support for FC remote port infrastructure. o Use fc_remote_port...() registration and block/unlock functions. o Consolidate 'attribute' (fc-remote/sysfs) helpers into new qla_attr.c file. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17 13:04:54 -07:00
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_init_host_attr(scsi_qla_host_t *);
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support. FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-17 10:02:17 -07:00
/*
* Global Function Prototypes in qla_dfs.c source file.
*/
extern int qla2x00_dfs_setup(scsi_qla_host_t *);
extern int qla2x00_dfs_remove(scsi_qla_host_t *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif /* _QLA_GBL_H */
Copy Permalink