kevin/linux
1
Fork 0
Code
4d9be47f3d
linux/arch/arm/mach-ixp4xx/Makefile

39 lines
1.3 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#
# Makefile for the linux kernel.
#
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
obj-pci-y :=
obj-pci-n :=
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
[ARM] 4033/1: Add separate Avila board setup code This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-16 15:04:05 -07:00
obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
[ARM] 4318/2: DSM-G600 Board Support This patch adds support for the D-Link DSM-G600 Rev A. This is an ARM XScale IXP4xx system relatively similar to the NSLU2 and NAS-100D already supported by mainline. An important difference is Gigabit Ethernet support using the Via Velocity chipset. This patch is the combined work of Michael Westerhof and Alessandro Zummo, with contributions from Michael-Luke Jones. This version addresses review comments from rmk and Deepak Saxena. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-28 00:31:40 -07:00
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
[ARM] 4425/2: Gateway 7001 series support This patch provides support for the Gateway 7001 AccessPoint series. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 07:44:08 -07:00
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
[ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series. This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 07:47:51 -07:00
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 02:53:23 -07:00
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 07:34:29 -07:00
obj-y += common.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
[ARM] 4033/1: Add separate Avila board setup code This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-16 15:04:05 -07:00
obj-$(CONFIG_MACH_AVILA) += avila-setup.o
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
[ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file, removing superfluous header includes and removing superfluous constants from the machine header file. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-03 04:05:42 -07:00
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
[ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file and remove superfluous header includes. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-03 04:05:49 -07:00
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
[ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file and remove superfluous header includes. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-03 04:05:55 -07:00
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
[ARM] 4425/2: Gateway 7001 series support This patch provides support for the Gateway 7001 AccessPoint series. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 07:44:08 -07:00
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
[ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series. This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 07:47:51 -07:00
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 02:53:23 -07:00
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
IXP4xx: support for Goramo MultiLink router platform. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 14:58:30 -07:00
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
ixp4xx: base support for Arcom Vulcan This patch adds some basic support for the Arcom Vulcan (ixp425 based). Supported devices include: - XR16L551 serial ports - External watchdog - Flash - SRAM - 1-wire id Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-04-10 13:32:38 -07:00
obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[ARM] 3612/1: make pci bus optional for ixp4xx platform Patch from Milan Svoboda IXP4XX platform can happily live without pci bus. This patch modifies Kconfig to support this option and modifies Makefile so pci only files are compiled only when pci is really selected. Patch is tested and ixdp465 runs fine with or without the pci bus.-- Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 14:12:12 -07:00
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
[ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-01 13:55:23 -07:00
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
Copy Permalink