kevin/linux
1
Fork 0
Code
4d6ddfa924
linux/arch/sparc64/kernel/winfixup.S

389 lines
12 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* $Id: winfixup.S,v 1.30 2002/02/09 19:49:30 davem Exp $
*
* winfixup.S: Handle cases where user stack pointer is found to be bogus.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/asi.h>
#include <asm/head.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/spitfire.h>
#include <asm/thread_info.h>
.text
set_pcontext:
[SPARC64]: Replace cheetah+ code patching with variables. Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 15:23:20 -07:00
sethi %hi(sparc64_kern_pri_context), %l1
ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mov PRIMARY_CONTEXT, %g1
stxa %l1, [%g1] ASI_DMMU
flush %g6
retl
nop
.align 32
/* Here are the rules, pay attention.
*
* The kernel is disallowed from touching user space while
* the trap level is greater than zero, except for from within
* the window spill/fill handlers. This must be followed
* so that we can easily detect the case where we tried to
* spill/fill with a bogus (or unmapped) user stack pointer.
*
* These are layed out in a special way for cache reasons,
* don't touch...
*/
.globl fill_fixup, spill_fixup
fill_fixup:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
or %g4, FAULT_CODE_WINFIXUP, %g4
be,pt %xcc, window_scheisse_from_user_common
and %g1, TSTATE_CWP, %g1
/* This is the extremely complex case, but it does happen from
* time to time if things are just right. Essentially the restore
* done in rtrap right before going back to user mode, with tl=1
* and that levels trap stack registers all setup, took a fill trap,
* the user stack was not mapped in the tlb, and tlb miss occurred,
* the pte found was not valid, and a simple ref bit watch update
* could not satisfy the miss, so we got here.
*
* We must carefully unwind the state so we get back to tl=0, preserve
* all the register values we were going to give to the user. Luckily
* most things are where they need to be, we also have the address
* which triggered the fault handy as well.
*
* Also note that we must preserve %l5 and %l6. If the user was
* returning from a system call, we must make it look this way
* after we process the fill fault on the users stack.
*
* First, get into the window where the original restore was executed.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g6, %o7 ! Get current.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6
ldx [%g6 + TI_TASK], %g4
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
/* This is the same as below, except we handle this a bit special
* since we must preserve %l5 and %l6, see comment above.
*/
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop ! yes, nop is correct
/* Be very careful about usage of the alternate globals here.
* You cannot touch %g4/%g5 as that has the fault information
* should this be from usermode. Also be careful for the case
* where we get here from the save instruction in etrap.S when
* coming from either user or kernel (does not matter which, it
* is the same problem in both cases). Essentially this means
* do not touch %g7 or %g2 so we handle the two cases fine.
*/
spill_fixup:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
b,pt %xcc, 2f
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
1: stw %l0, [%g3 + TI_REG_WINDOW + 0x00]
stw %l1, [%g3 + TI_REG_WINDOW + 0x04]
stw %l2, [%g3 + TI_REG_WINDOW + 0x08]
stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]
stw %l4, [%g3 + TI_REG_WINDOW + 0x10]
stw %l5, [%g3 + TI_REG_WINDOW + 0x14]
stw %l6, [%g3 + TI_REG_WINDOW + 0x18]
stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]
stw %i0, [%g3 + TI_REG_WINDOW + 0x20]
stw %i1, [%g3 + TI_REG_WINDOW + 0x24]
stw %i2, [%g3 + TI_REG_WINDOW + 0x28]
stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]
stw %i4, [%g3 + TI_REG_WINDOW + 0x30]
stw %i5, [%g3 + TI_REG_WINDOW + 0x34]
stw %i6, [%g3 + TI_REG_WINDOW + 0x38]
stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]
2: add %g1, 1, %g1
stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
and %g1, TSTATE_CWP, %g1
be,pn %xcc, window_scheisse_from_user_common
mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4
retry
window_scheisse_from_user_common:
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g1, %cwp
ba,pt %xcc, etrap
rd %pc, %g7
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_clr_l6
.globl winfix_mna, fill_fixup_mna, spill_fixup_mna
winfix_mna:
andn %g3, 0x7f, %g3
add %g3, 0x78, %g3
wrpr %g3, %tnpc
done
fill_fixup_mna:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o2 ! Setup args for
mov %g5, %o1 ! final call to mem_address_unaligned.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_mna:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_mna_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o2
mov %l5, %o1
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
/* These are only needed for 64-bit mode processes which
* put their stack pointer into the VPTE area and there
* happens to be a VPTE tlb entry mapped there during
* a spill/fill trap to that stack frame.
*/
.globl winfix_dax, fill_fixup_dax, spill_fixup_dax
winfix_dax:
andn %g3, 0x7f, %g3
add %g3, 0x74, %g3
wrpr %g3, %tnpc
done
fill_fixup_dax:
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o1 ! Setup args for
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:45:11 -07:00
mov %g5, %o2 ! final call to spitfire_data_access_exception.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
#ifdef CONFIG_SMP
mov TSB_REG, %g1
ldxa [%g1] ASI_IMMU, %g5
#endif
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:45:11 -07:00
call spitfire_data_access_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_dax:
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_dax_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:45:11 -07:00
call spitfire_data_access_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
Copy Permalink