kevin/linux
1
Fork 0
Code
4a08a9f681
linux/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h

459 lines
14 KiB
C
Raw Normal View History

[PATCH] dvb: flexcop: add big endian register definitions Add big-endian register definitions for running on a PowerPC. (Thanks to Paavo Hartikainen for testing.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 17:57:48 -07:00
/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* register descriptions
*
* see flexcop.c for copyright information.
*/
/* This file is automatically generated, do not edit things here. */
#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
#define __FLEXCOP_IBI_VALUE_INCLUDED__
typedef union {
u32 raw;
struct {
u32 dma_0start : 1;
u32 dma_0No_update : 1;
u32 dma_address0 :30;
} dma_0x0;
struct {
u32 DMA_maxpackets : 8;
u32 dma_addr_size :24;
} dma_0x4_remap;
struct {
u32 dma1timer : 7;
u32 unused : 1;
u32 dma_addr_size :24;
} dma_0x4_read;
struct {
u32 unused : 1;
u32 dmatimer : 7;
u32 dma_addr_size :24;
} dma_0x4_write;
struct {
u32 unused : 2;
u32 dma_cur_addr :30;
} dma_0x8;
struct {
u32 dma_1start : 1;
u32 remap_enable : 1;
u32 dma_address1 :30;
} dma_0xc;
struct {
u32 chipaddr : 7;
u32 reserved1 : 1;
u32 baseaddr : 8;
u32 data1_reg : 8;
u32 working_start : 1;
u32 twoWS_rw : 1;
u32 total_bytes : 2;
u32 twoWS_port_reg : 2;
u32 no_base_addr_ack_error : 1;
u32 st_done : 1;
} tw_sm_c_100;
struct {
u32 data2_reg : 8;
u32 data3_reg : 8;
u32 data4_reg : 8;
u32 exlicit_stops : 1;
u32 force_stop : 1;
u32 unused : 6;
} tw_sm_c_104;
struct {
u32 thi1 : 6;
u32 reserved1 : 2;
u32 tlo1 : 5;
u32 reserved2 :19;
} tw_sm_c_108;
struct {
u32 thi1 : 6;
u32 reserved1 : 2;
u32 tlo1 : 5;
u32 reserved2 :19;
} tw_sm_c_10c;
struct {
u32 thi1 : 6;
u32 reserved1 : 2;
u32 tlo1 : 5;
u32 reserved2 :19;
} tw_sm_c_110;
struct {
u32 LNB_CTLHighCount_sig :15;
u32 LNB_CTLLowCount_sig :15;
u32 LNB_CTLPrescaler_sig : 2;
} lnb_switch_freq_200;
struct {
u32 ACPI1_sig : 1;
u32 ACPI3_sig : 1;
u32 LNB_L_H_sig : 1;
u32 Per_reset_sig : 1;
u32 reserved :20;
u32 Rev_N_sig_revision_hi : 4;
u32 Rev_N_sig_reserved1 : 2;
u32 Rev_N_sig_caps : 1;
u32 Rev_N_sig_reserved2 : 1;
} misc_204;
struct {
u32 Stream1_filter_sig : 1;
u32 Stream2_filter_sig : 1;
u32 PCR_filter_sig : 1;
u32 PMT_filter_sig : 1;
u32 EMM_filter_sig : 1;
u32 ECM_filter_sig : 1;
u32 Null_filter_sig : 1;
u32 Mask_filter_sig : 1;
u32 WAN_Enable_sig : 1;
u32 WAN_CA_Enable_sig : 1;
u32 CA_Enable_sig : 1;
u32 SMC_Enable_sig : 1;
u32 Per_CA_Enable_sig : 1;
u32 Multi2_Enable_sig : 1;
u32 MAC_filter_Mode_sig : 1;
u32 Rcv_Data_sig : 1;
u32 DMA1_IRQ_Enable_sig : 1;
u32 DMA1_Timer_Enable_sig : 1;
u32 DMA2_IRQ_Enable_sig : 1;
u32 DMA2_Timer_Enable_sig : 1;
u32 DMA1_Size_IRQ_Enable_sig : 1;
u32 DMA2_Size_IRQ_Enable_sig : 1;
u32 Mailbox_from_V8_Enable_sig : 1;
u32 unused : 9;
} ctrl_208;
struct {
u32 DMA1_IRQ_Status : 1;
u32 DMA1_Timer_Status : 1;
u32 DMA2_IRQ_Status : 1;
u32 DMA2_Timer_Status : 1;
u32 DMA1_Size_IRQ_Status : 1;
u32 DMA2_Size_IRQ_Status : 1;
u32 Mailbox_from_V8_Status_sig : 1;
u32 Data_receiver_error : 1;
u32 Continuity_error_flag : 1;
u32 LLC_SNAP_FLAG_set : 1;
u32 Transport_Error : 1;
u32 reserved :21;
} irq_20c;
struct {
[PATCH] dvb: flexcop: woraround irq stop problem The flexcop chip often stops generating interrupts after some hours of operation. Apparently this can be fixed by resetting register block 0x300 at each channel change (this is not detailed in the flexcop data books). This patch also restructures DMA handling and adds a bit of debug code for the irq problem in case it still happens for someone. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 17:57:49 -07:00
u32 reset_block_000 : 1;
u32 reset_block_100 : 1;
u32 reset_block_200 : 1;
u32 reset_block_300 : 1;
u32 reset_block_400 : 1;
u32 reset_block_500 : 1;
u32 reset_block_600 : 1;
u32 reset_block_700 : 1;
[PATCH] dvb: flexcop: add big endian register definitions Add big-endian register definitions for running on a PowerPC. (Thanks to Paavo Hartikainen for testing.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 17:57:48 -07:00
u32 Block_reset_enable : 8;
u32 Special_controls :16;
} sw_reset_210;
struct {
u32 vuart_oe_sig : 1;
u32 v2WS_oe_sig : 1;
u32 halt_V8_sig : 1;
u32 section_pkg_enable_sig : 1;
u32 s2p_sel_sig : 1;
u32 unused1 : 3;
u32 polarity_PS_CLK_sig : 1;
u32 polarity_PS_VALID_sig : 1;
u32 polarity_PS_SYNC_sig : 1;
u32 polarity_PS_ERR_sig : 1;
u32 unused2 :20;
} misc_214;
struct {
u32 Mailbox_from_V8 :32;
} mbox_v8_to_host_218;
struct {
u32 sysramaccess_data : 8;
u32 sysramaccess_addr :15;
u32 unused : 7;
u32 sysramaccess_write : 1;
u32 sysramaccess_busmuster : 1;
} mbox_host_to_v8_21c;
struct {
u32 Stream1_PID :13;
u32 Stream1_trans : 1;
u32 MAC_Multicast_filter : 1;
u32 debug_flag_pid_saved : 1;
u32 Stream2_PID :13;
u32 Stream2_trans : 1;
u32 debug_flag_write_status00 : 1;
u32 debug_fifo_problem : 1;
} pid_filter_300;
struct {
u32 PCR_PID :13;
u32 PCR_trans : 1;
u32 debug_overrun3 : 1;
u32 debug_overrun2 : 1;
u32 PMT_PID :13;
u32 PMT_trans : 1;
u32 reserved : 2;
} pid_filter_304;
struct {
u32 EMM_PID :13;
u32 EMM_trans : 1;
u32 EMM_filter_4 : 1;
u32 EMM_filter_6 : 1;
u32 ECM_PID :13;
u32 ECM_trans : 1;
u32 reserved : 2;
} pid_filter_308;
struct {
u32 Group_PID :13;
u32 Group_trans : 1;
u32 unused1 : 2;
u32 Group_mask :13;
u32 unused2 : 3;
} pid_filter_30c_ext_ind_0_7;
struct {
u32 net_master_read :17;
u32 unused :15;
} pid_filter_30c_ext_ind_1;
struct {
u32 net_master_write :17;
u32 unused :15;
} pid_filter_30c_ext_ind_2;
struct {
u32 next_net_master_write :17;
u32 unused :15;
} pid_filter_30c_ext_ind_3;
struct {
u32 unused1 : 1;
u32 state_write :10;
u32 reserved1 : 6;
u32 stack_read :10;
u32 reserved2 : 5;
} pid_filter_30c_ext_ind_4;
struct {
u32 stack_cnt :10;
u32 unused :22;
} pid_filter_30c_ext_ind_5;
struct {
u32 pid_fsm_save_reg0 : 2;
u32 pid_fsm_save_reg1 : 2;
u32 pid_fsm_save_reg2 : 2;
u32 pid_fsm_save_reg3 : 2;
u32 pid_fsm_save_reg4 : 2;
u32 pid_fsm_save_reg300 : 2;
u32 write_status1 : 2;
u32 write_status4 : 2;
u32 data_size_reg :12;
u32 unused : 4;
} pid_filter_30c_ext_ind_6;
struct {
u32 index_reg : 5;
u32 extra_index_reg : 3;
u32 AB_select : 1;
u32 pass_alltables : 1;
u32 unused :22;
} index_reg_310;
struct {
u32 PID :13;
u32 PID_trans : 1;
u32 PID_enable_bit : 1;
u32 reserved :17;
} pid_n_reg_314;
struct {
u32 A4_byte : 8;
u32 A5_byte : 8;
u32 A6_byte : 8;
u32 Enable_bit : 1;
u32 HighAB_bit : 1;
u32 reserved : 6;
} mac_low_reg_318;
struct {
u32 A1_byte : 8;
u32 A2_byte : 8;
u32 A3_byte : 8;
u32 reserved : 8;
} mac_high_reg_31c;
struct {
u32 reserved :16;
u32 data_Tag_ID :16;
} data_tag_400;
struct {
u32 Card_IDbyte6 : 8;
u32 Card_IDbyte5 : 8;
u32 Card_IDbyte4 : 8;
u32 Card_IDbyte3 : 8;
} card_id_408;
struct {
u32 Card_IDbyte2 : 8;
u32 Card_IDbyte1 : 8;
} card_id_40c;
struct {
u32 MAC1 : 8;
u32 MAC2 : 8;
u32 MAC3 : 8;
u32 MAC6 : 8;
} mac_address_418;
struct {
u32 MAC7 : 8;
u32 MAC8 : 8;
u32 reserved :16;
} mac_address_41c;
struct {
u32 transmitter_data_byte : 8;
u32 ReceiveDataReady : 1;
u32 ReceiveByteFrameError : 1;
u32 txbuffempty : 1;
u32 reserved :21;
} ci_600;
struct {
u32 pi_d : 8;
u32 pi_ha :20;
u32 pi_rw : 1;
u32 pi_component_reg : 3;
} pi_604;
struct {
u32 serialReset : 1;
u32 oncecycle_read : 1;
u32 Timer_Read_req : 1;
u32 Timer_Load_req : 1;
u32 timer_data : 7;
u32 unused : 1;
u32 Timer_addr : 5;
u32 reserved : 3;
u32 pcmcia_a_mod_pwr_n : 1;
u32 pcmcia_b_mod_pwr_n : 1;
u32 config_Done_stat : 1;
u32 config_Init_stat : 1;
u32 config_Prog_n : 1;
u32 config_wr_n : 1;
u32 config_cs_n : 1;
u32 config_cclk : 1;
u32 pi_CiMax_IRQ_n : 1;
u32 pi_timeout_status : 1;
u32 pi_wait_n : 1;
u32 pi_busy_n : 1;
} pi_608;
struct {
u32 PID :13;
u32 key_enable : 1;
u32 key_code : 2;
u32 key_array_col : 3;
u32 key_array_row : 5;
u32 dvb_en : 1;
u32 rw_flag : 1;
u32 reserved : 6;
} dvb_reg_60c;
struct {
u32 sram_addr :15;
u32 sram_rw : 1;
u32 sram_data : 8;
u32 sc_xfer_bit : 1;
u32 reserved1 : 3;
u32 oe_pin_reg : 1;
u32 ce_pin_reg : 1;
u32 reserved2 : 1;
u32 start_sram_ibi : 1;
} sram_ctrl_reg_700;
struct {
u32 net_addr_read :16;
u32 net_addr_write :16;
} net_buf_reg_704;
struct {
u32 cai_read :11;
u32 reserved1 : 5;
u32 cai_write :11;
u32 reserved2 : 6;
u32 cai_cnt : 4;
} cai_buf_reg_708;
struct {
u32 cao_read :11;
u32 reserved1 : 5;
u32 cap_write :11;
u32 reserved2 : 6;
u32 cao_cnt : 4;
} cao_buf_reg_70c;
struct {
u32 media_read :11;
u32 reserved1 : 5;
u32 media_write :11;
u32 reserved2 : 6;
u32 media_cnt : 4;
} media_buf_reg_710;
struct {
u32 NET_Dest : 2;
u32 CAI_Dest : 2;
u32 CAO_Dest : 2;
u32 MEDIA_Dest : 2;
u32 net_ovflow_error : 1;
u32 media_ovflow_error : 1;
u32 cai_ovflow_error : 1;
u32 cao_ovflow_error : 1;
u32 ctrl_usb_wan : 1;
u32 ctrl_sramdma : 1;
u32 ctrl_maximumfill : 1;
u32 reserved :17;
} sram_dest_reg_714;
struct {
u32 net_cnt :12;
u32 reserved1 : 4;
u32 net_addr_read : 1;
u32 reserved2 : 3;
u32 net_addr_write : 1;
u32 reserved3 :11;
} net_buf_reg_718;
struct {
u32 wan_speed_sig : 2;
u32 reserved1 : 6;
u32 wan_wait_state : 8;
u32 sram_chip : 2;
u32 sram_memmap : 2;
u32 reserved2 : 4;
u32 wan_pkt_frame : 4;
u32 reserved3 : 4;
} wan_ctrl_reg_71c;
} flexcop_ibi_value;
#endif
Copy Permalink