kevin/linux
1
Fork 0
Code
4a0826824b
linux/arch/powerpc/kernel/ppc_ksyms.c

190 lines
4.6 KiB
C
Raw Normal View History

powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/elfcore.h>
#include <linux/string.h>
#include <linux/interrupt.h>
[PATCH] tty: Remove include of screen_info.h from tty.h screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 04:44:13 -07:00
#include <linux/screen_info.h>
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#include <linux/vt_kern.h>
#include <linux/nvram.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <asm/page.h>
#include <asm/processor.h>
[POWERPC] Fix build errors when BLOCK=n These are the symptom error messages: CC arch/powerpc/kernel/setup_32.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/setup_32.c:13: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/setup_32.c:13: include/linux/ide.h:857: error: field 'wrq' has incomplete type CC arch/powerpc/kernel/ppc_ksyms.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/ide.h:857: error: field 'wrq' has incomplete type The fix tries to use the smallest scope CONFIG_* symbols that will fix the build problem. In this case <linux/ide.h> needs to be included only if IDE=y or IDE=m were selected. Also, ppc_ide_md is needed only if BLK_DEV_IDE=y or BLK_DEV_IDE=m Moved the EXPORT_SYMBOL(ppc_ide_md) from ppc_ksysms.c next to its declaration in setup_32.c which made <linux/ide.h> not needed. With <linux/ide.h> gone from ppc_ksyms.c, <asm/cacheflush.h> is needed to address the following warnings and errors: CC arch/powerpc/kernel/ppc_ksyms.o arch/powerpc/kernel/ppc_ksyms.c:122: error: '__flush_icache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:122: warning: type defaults to 'int' in declaration of '__flush_icache_range' arch/powerpc/kernel/ppc_ksyms.c:123: error: 'flush_dcache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:123: warning: type defaults to 'int' in declaration of 'flush_dcache_range' Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 19:25:17 -07:00
#include <asm/cacheflush.h>
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
#include <asm/nvram.h>
#include <asm/mmu_context.h>
#include <asm/backlight.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/btext.h>
#include <asm/div64.h>
[PATCH] powerpc: Merge signal.h Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 17:21:07 -07:00
#include <asm/signal.h>
[POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 17:48:28 -07:00
#include <asm/dcr.h>
ftrace: powerpc clean ups This patch cleans up the ftrace code in PowerPC based on the comments from Michael Ellerman. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: proski@gnu.org Cc: a.p.zijlstra@chello.nl Cc: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linuxppc-dev@ozlabs.org Cc: Soeren Sandmann Pedersen <sandmann@redhat.com> Cc: paulus@samba.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22 11:31:07 -07:00
#include <asm/ftrace.h>
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
extern void transfer_to_handler(void);
extern void do_IRQ(struct pt_regs *regs);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 01:43:42 -07:00
extern void machine_check_exception(struct pt_regs *regs);
extern void alignment_exception(struct pt_regs *regs);
extern void program_check_exception(struct pt_regs *regs);
extern void single_step_exception(struct pt_regs *regs);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
extern int sys_sigreturn(struct pt_regs *regs);
EXPORT_SYMBOL(clear_pages);
[POWERPC] Export copy_page() on 32bit Export copy_page() on 32-bit powerpc; unionfs needs it. Unionfs already builds as a module on 64bit powerpc, so the export is placed within an existing CONFIG_PPC32 #ifdef. Signed-off-by: Joseph Fannin <jfannin@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-01 08:36:07 -07:00
EXPORT_SYMBOL(copy_page);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 01:43:42 -07:00
EXPORT_SYMBOL(machine_check_exception);
EXPORT_SYMBOL(alignment_exception);
EXPORT_SYMBOL(program_check_exception);
EXPORT_SYMBOL(single_step_exception);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(sys_sigreturn);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
ftrace: rename FTRACE to FUNCTION_TRACER Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 16:06:12 -07:00
#ifdef CONFIG_FUNCTION_TRACER
ftrace: powerpc clean ups This patch cleans up the ftrace code in PowerPC based on the comments from Michael Ellerman. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: proski@gnu.org Cc: a.p.zijlstra@chello.nl Cc: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linuxppc-dev@ozlabs.org Cc: Soeren Sandmann Pedersen <sandmann@redhat.com> Cc: paulus@samba.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-22 11:31:07 -07:00
EXPORT_SYMBOL(_mcount);
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
[POWERPC] Add hand-coded assembly strcmp We have an assembly version of strncmp for the bootwrapper, but not for the kernel, so we end up using the C version in the kernel. This takes the strncmp code from the bootup and copies it to the kernel proper, adding two instructions so it copes correctly with len==0. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-29 09:04:57 -07:00
EXPORT_SYMBOL(strncmp);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(ip_fast_csum);
EXPORT_SYMBOL(csum_tcpudp_magic);
EXPORT_SYMBOL(__copy_tofrom_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
[POWERPC] Export copy_4K_page() Export copy_4K_page() for use by modules via copy_page() (such as CacheFiles). Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-12 08:04:25 -07:00
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(copy_4K_page);
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
EXPORT_SYMBOL(pci_alloc_consistent);
EXPORT_SYMBOL(pci_free_consistent);
#endif /* CONFIG_PCI */
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(giveup_fpu);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-24 21:07:18 -07:00
#ifdef CONFIG_VSX
EXPORT_SYMBOL(giveup_vsx);
#endif /* CONFIG_VSX */
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_SPE
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
powerpc: Export __flush_icache_range for 32-bit Both 32-bit and 64-bit use the same inline flush_icache_range definition now, so both need to export __flush_icache_range, not just 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-28 21:50:58 -07:00
#ifndef CONFIG_PPC64
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
EXPORT_SYMBOL(flush_instruction_cache);
#endif
powerpc: Export __flush_icache_range for 32-bit Both 32-bit and 64-bit use the same inline flush_icache_range definition now, so both need to export __flush_icache_range, not just 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-28 21:50:58 -07:00
EXPORT_SYMBOL(__flush_icache_range);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
EXPORT_SYMBOL(flush_dcache_range);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#ifdef CONFIG_SMP
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(smp_hw_index);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#ifdef CONFIG_ADB
EXPORT_SYMBOL(adb_request);
EXPORT_SYMBOL(adb_register);
EXPORT_SYMBOL(adb_unregister);
EXPORT_SYMBOL(adb_poll);
EXPORT_SYMBOL(adb_try_handler_change);
#endif /* CONFIG_ADB */
#ifdef CONFIG_ADB_CUDA
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
EXPORT_SYMBOL(to_tm);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_PPC32
long long __ashrdi3(long long, int);
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-12 15:39:55 -07:00
int __ucmpdi2(unsigned long long, unsigned long long);
EXPORT_SYMBOL(__ucmpdi2);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memchr);
#if defined(CONFIG_FB_VGA16_MODULE)
EXPORT_SYMBOL(screen_info);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
EXPORT_SYMBOL(cacheable_memcpy);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#ifdef CONFIG_PPC32
powerpc/mm: Split mmu_context handling This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18 12:13:24 -07:00
EXPORT_SYMBOL(switch_mmu_context);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#endif
#ifdef CONFIG_PPC_STD_MMU_32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
extern long mol_trampoline;
EXPORT_SYMBOL(mol_trampoline); /* For MOL */
EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
#ifdef CONFIG_SMP
extern int mmu_hash_lock;
EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
#endif /* CONFIG_SMP */
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 05:50:37 -07:00
#endif /* CONFIG_PPC_STD_MMU_32 */
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 22:15:47 -07:00
#ifdef CONFIG_PPC_DCR_NATIVE
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 03:28:14 -07:00
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
[POWERPC] Really export empty_zero_page It was being protected by CONFIG_PPC32, but we want to export it on 64-bit also. This moves it out of the ifdef. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-12 22:20:31 -07:00
EXPORT_SYMBOL(empty_zero_page);
Copy Permalink