kevin/linux
1
Fork 0
Code
3f0bde8353
linux/include/asm-x86/proto.h

98 lines
2.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifndef _ASM_X8664_PROTO_H
#define _ASM_X8664_PROTO_H 1
#include <asm/ldt.h>
/* misc architecture specific prototypes */
struct cpuinfo_x86;
struct pt_regs;
extern void start_kernel(void);
extern void pda_init(int);
extern void early_idt_handler(void);
extern void mcheck_init(struct cpuinfo_x86 *c);
extern void init_memory_mapping(unsigned long start, unsigned long end);
extern void system_call(void);
extern int kernel_syscall(void);
extern void syscall_init(void);
extern void ia32_syscall(void);
extern void ia32_cstar_target(void);
extern void ia32_sysenter_target(void);
extern void config_acpi_tables(void);
extern void ia32_syscall(void);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 21:53:28 -07:00
extern int pmtimer_mark_offset(void);
[PATCH] x86_64: [PATCH] timer resume At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:56 -07:00
extern void pmtimer_resume(void);
[PATCH] x86_64: Calibrate APIC timer using PM timer On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:51:41 -07:00
extern void pmtimer_wait(unsigned);
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 21:53:28 -07:00
extern unsigned int do_gettimeoffset_pm(void);
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:44 -07:00
#ifdef CONFIG_X86_PM_TIMER
[PATCH] x86_64: Add pmtimer support There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-16 21:53:28 -07:00
extern u32 pmtmr_ioport;
[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not available Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:44 -07:00
#else
#define pmtmr_ioport 0
#endif
[PATCH] x86_64: Allow to run main time keeping from the local APIC interrupt Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 13:50:50 -07:00
extern int nohpet;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
extern void early_identify_cpu(struct cpuinfo_x86 *c);
extern int k8_scan_nodes(unsigned long start, unsigned long end);
extern void numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn);
extern unsigned long numa_free_all_bootmem(void);
extern void reserve_bootmem_generic(unsigned long phys, unsigned len);
extern void load_gs_index(unsigned gs);
extern unsigned long end_pfn_map;
[PATCH] x86_64: reliable stack trace support (x86-64) These are the x86_64-specific pieces to enable reliable stack traces. The only restriction with this is that it currently cannot unwind across the interrupt->normal stack boundary, as that transition is lacking proper annotation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 04:57:32 -07:00
extern void show_trace(struct task_struct *, struct pt_regs *, unsigned long * rsp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void show_registers(struct pt_regs *regs);
extern void exception_table_check(void);
extern void acpi_reserve_bootmem(void);
extern void swap_low_mappings(void);
extern void __show_regs(struct pt_regs * regs);
extern void show_regs(struct pt_regs * regs);
extern void syscall32_cpu_init(void);
extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
[PATCH] Move early chipset quirks out to new file They did not really belong into io_apic.c. Move them into a new file and clean it up a bit. Also remove outdated ATI quirk that was obsolete, Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:30 -07:00
extern void early_quirks(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void check_efer(void);
extern void select_idle_routine(const struct cpuinfo_x86 *c);
[PATCH] x86_64: Use function pointers to call DMA mapping functions AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 14:44:42 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern unsigned long table_start, table_end;
extern int exception_trace;
extern unsigned cpu_khz;
[PATCH] x86-64: fix cpu MHz reporting on constant_tsc cpus This patch fixes the reporting of cpu_mhz in /proc/cpuinfo on CPUs with a constant TSC rate and a kernel with disabled cpufreq. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> arch/x86_64/kernel/apic.c | 2 - arch/x86_64/kernel/time.c | 58 +++++++++++++++++++++++++++++++++++++++--- arch/x86_64/kernel/tsc.c | 12 +++++--- arch/x86_64/kernel/tsc_sync.c | 2 - include/asm-x86_64/proto.h | 1 5 files changed, 65 insertions(+), 10 deletions(-)
2007-05-02 10:27:06 -07:00
extern unsigned tsc_khz;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int reboot_force;
[PATCH] x86_64: Disable tsc when apicpmtimer is active Otherwise it has no effect anyways. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-16 15:42:07 -07:00
extern int notsc_setup(char *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 state By default route the 8254 over the 8259 and only disable it on ATI boards where this causes double timer interrupts. This should unbreak some Nvidia boards where the timer doesn't seem to tick of it isn't enabled in the 8259. At least one VIA board also seemed to have a little trouble with the disabled 8259. For 2.6.20 we'll try both dynamically without black listing, but I think for .19 this is the safer approach because it has been already well tested in earlier kernels. This also makes the x86-64 behaviour the same as i386. Command line options can change all this of course. Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-21 09:37:03 -07:00
extern int timer_over_8254;
[PATCH] x86: Remove unneeded externs in acpi/boot.c And move one into proto.h Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 01:52:33 -07:00
extern int gsi_irq_sharing(int gsi);
[PATCH] x86: Don't use MWAIT on AMD Family 10 It doesn't put the CPU into deeper sleep states, so it's better to use the standard idle loop to save power. But allow to reenable it anyways for benchmarking. I also removed the obsolete idle=halt on i386 Cc: andreas.herrmann@amd.com Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 10:27:12 -07:00
extern int force_mwait;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
#define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
#define round_down(x,y) ((x) & ~((y)-1))
#endif
Copy Permalink