2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP)
|
|
|
|
*
|
|
|
|
* Copyright (c) 2003, Jouni Malinen <j@w1.fi>
|
|
|
|
* Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net>
|
|
|
|
* Some parts copyright (c) 2003 by David Young <dyoung@pobox.com>
|
|
|
|
* and used with permission.
|
|
|
|
*
|
|
|
|
* Much thanks to Infineon-ADMtek for their support of this driver.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation. See README and COPYING for
|
|
|
|
* more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/if.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/crc32.h>
|
|
|
|
#include <linux/eeprom_93cx6.h>
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
|
|
|
|
#include "adm8211.h"
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
|
|
|
|
MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
|
|
|
|
MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211");
|
|
|
|
MODULE_SUPPORTED_DEVICE("ADM8211");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
static unsigned int tx_ring_size __read_mostly = 16;
|
|
|
|
static unsigned int rx_ring_size __read_mostly = 16;
|
|
|
|
|
|
|
|
module_param(tx_ring_size, uint, 0);
|
|
|
|
module_param(rx_ring_size, uint, 0);
|
|
|
|
|
|
|
|
static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
|
|
|
|
/* ADMtek ADM8211 */
|
|
|
|
{ PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */
|
|
|
|
{ PCI_DEVICE(0x1200, 0x8201) }, /* ? */
|
|
|
|
{ PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */
|
|
|
|
{ PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */
|
|
|
|
{ 0 }
|
|
|
|
};
|
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
static struct ieee80211_rate adm8211_rates[] = {
|
|
|
|
{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
|
|
{ .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct ieee80211_channel adm8211_channels[] = {
|
|
|
|
{ .center_freq = 2412},
|
|
|
|
{ .center_freq = 2417},
|
|
|
|
{ .center_freq = 2422},
|
|
|
|
{ .center_freq = 2427},
|
|
|
|
{ .center_freq = 2432},
|
|
|
|
{ .center_freq = 2437},
|
|
|
|
{ .center_freq = 2442},
|
|
|
|
{ .center_freq = 2447},
|
|
|
|
{ .center_freq = 2452},
|
|
|
|
{ .center_freq = 2457},
|
|
|
|
{ .center_freq = 2462},
|
|
|
|
{ .center_freq = 2467},
|
|
|
|
{ .center_freq = 2472},
|
|
|
|
{ .center_freq = 2484},
|
|
|
|
};
|
|
|
|
|
|
|
|
|
2007-08-30 22:15:25 -07:00
|
|
|
static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = eeprom->data;
|
|
|
|
u32 reg = ADM8211_CSR_READ(SPR);
|
|
|
|
|
|
|
|
eeprom->reg_data_in = reg & ADM8211_SPR_SDI;
|
|
|
|
eeprom->reg_data_out = reg & ADM8211_SPR_SDO;
|
|
|
|
eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK;
|
|
|
|
eeprom->reg_chip_select = reg & ADM8211_SPR_SCS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = eeprom->data;
|
|
|
|
u32 reg = 0x4000 | ADM8211_SPR_SRS;
|
|
|
|
|
|
|
|
if (eeprom->reg_data_in)
|
|
|
|
reg |= ADM8211_SPR_SDI;
|
|
|
|
if (eeprom->reg_data_out)
|
|
|
|
reg |= ADM8211_SPR_SDO;
|
|
|
|
if (eeprom->reg_data_clock)
|
|
|
|
reg |= ADM8211_SPR_SCLK;
|
|
|
|
if (eeprom->reg_chip_select)
|
|
|
|
reg |= ADM8211_SPR_SCS;
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(SPR, reg);
|
|
|
|
ADM8211_CSR_READ(SPR); /* eeprom_delay */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_read_eeprom(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int words, i;
|
|
|
|
struct ieee80211_chan_range chan_range;
|
|
|
|
u16 cr49;
|
|
|
|
struct eeprom_93cx6 eeprom = {
|
|
|
|
.data = priv,
|
|
|
|
.register_read = adm8211_eeprom_register_read,
|
|
|
|
.register_write = adm8211_eeprom_register_write
|
|
|
|
};
|
|
|
|
|
|
|
|
if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) {
|
|
|
|
/* 256 * 16-bit = 512 bytes */
|
|
|
|
eeprom.width = PCI_EEPROM_WIDTH_93C66;
|
|
|
|
words = 256;
|
|
|
|
} else {
|
|
|
|
/* 64 * 16-bit = 128 bytes */
|
|
|
|
eeprom.width = PCI_EEPROM_WIDTH_93C46;
|
|
|
|
words = 64;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->eeprom_len = words * 2;
|
|
|
|
priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL);
|
|
|
|
if (!priv->eeprom)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2007-12-22 11:45:50 -07:00
|
|
|
eeprom_93cx6_multiread(&eeprom, 0, (__le16 *)priv->eeprom, words);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
cr49 = le16_to_cpu(priv->eeprom->cr49);
|
|
|
|
priv->rf_type = (cr49 >> 3) & 0x7;
|
|
|
|
switch (priv->rf_type) {
|
|
|
|
case ADM8211_TYPE_INTERSIL:
|
|
|
|
case ADM8211_TYPE_RFMD:
|
|
|
|
case ADM8211_TYPE_MARVEL:
|
|
|
|
case ADM8211_TYPE_AIROHA:
|
|
|
|
case ADM8211_TYPE_ADMTEK:
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->rf_type = ADM8211_TYPE_RFMD;
|
|
|
|
else
|
|
|
|
priv->rf_type = ADM8211_TYPE_AIROHA;
|
|
|
|
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n",
|
|
|
|
pci_name(priv->pdev), (cr49 >> 3) & 0x7);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->bbp_type = cr49 & 0x7;
|
|
|
|
switch (priv->bbp_type) {
|
|
|
|
case ADM8211_TYPE_INTERSIL:
|
|
|
|
case ADM8211_TYPE_RFMD:
|
|
|
|
case ADM8211_TYPE_MARVEL:
|
|
|
|
case ADM8211_TYPE_AIROHA:
|
|
|
|
case ADM8211_TYPE_ADMTEK:
|
|
|
|
break;
|
|
|
|
default:
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->bbp_type = ADM8211_TYPE_RFMD;
|
|
|
|
else
|
|
|
|
priv->bbp_type = ADM8211_TYPE_ADMTEK;
|
|
|
|
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n",
|
|
|
|
pci_name(priv->pdev), cr49 >> 3);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) {
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n",
|
|
|
|
pci_name(priv->pdev), priv->eeprom->country_code);
|
|
|
|
|
|
|
|
chan_range = cranges[2];
|
|
|
|
} else
|
|
|
|
chan_range = cranges[priv->eeprom->country_code];
|
|
|
|
|
|
|
|
printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
|
|
|
|
pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
|
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
|
2007-08-30 22:15:25 -07:00
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
|
|
|
|
priv->band.channels = priv->channels;
|
|
|
|
priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
|
|
|
|
priv->band.bitrates = adm8211_rates;
|
|
|
|
priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
|
2008-01-24 11:38:38 -07:00
|
|
|
if (i < chan_range.min || i > chan_range.max)
|
|
|
|
priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
switch (priv->eeprom->specific_bbptype) {
|
|
|
|
case ADM8211_BBP_RFMD3000:
|
|
|
|
case ADM8211_BBP_RFMD3002:
|
|
|
|
case ADM8211_BBP_ADM8011:
|
|
|
|
priv->specific_bbptype = priv->eeprom->specific_bbptype;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->specific_bbptype = ADM8211_BBP_RFMD3000;
|
|
|
|
else
|
|
|
|
priv->specific_bbptype = ADM8211_BBP_ADM8011;
|
|
|
|
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n",
|
|
|
|
pci_name(priv->pdev), priv->eeprom->specific_bbptype);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (priv->eeprom->specific_rftype) {
|
|
|
|
case ADM8211_RFMD2948:
|
|
|
|
case ADM8211_RFMD2958:
|
|
|
|
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
|
|
|
|
case ADM8211_MAX2820:
|
|
|
|
case ADM8211_AL2210L:
|
|
|
|
priv->transceiver_type = priv->eeprom->specific_rftype;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision == ADM8211_REV_BA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER;
|
2007-09-24 15:10:25 -07:00
|
|
|
else if (priv->pdev->revision == ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->transceiver_type = ADM8211_AL2210L;
|
2007-09-24 15:10:25 -07:00
|
|
|
else if (priv->pdev->revision == ADM8211_REV_AB)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->transceiver_type = ADM8211_RFMD2948;
|
|
|
|
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
|
|
|
|
pci_name(priv->pdev), priv->eeprom->specific_rftype);
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d "
|
|
|
|
"Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type,
|
|
|
|
priv->bbp_type, priv->specific_bbptype, priv->transceiver_type);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void adm8211_write_sram(struct ieee80211_hw *dev,
|
|
|
|
u32 addr, u32 data)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR |
|
2007-09-24 15:10:25 -07:00
|
|
|
(priv->pdev->revision < ADM8211_REV_BA ?
|
2007-08-30 22:15:25 -07:00
|
|
|
0 : ADM8211_WEPCTL_SEL_WEPTABLE ));
|
|
|
|
ADM8211_CSR_READ(WEPCTL);
|
|
|
|
msleep(1);
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(WESK, data);
|
|
|
|
ADM8211_CSR_READ(WESK);
|
|
|
|
msleep(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_write_sram_bytes(struct ieee80211_hw *dev,
|
|
|
|
unsigned int addr, u8 *buf,
|
|
|
|
unsigned int len)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg = ADM8211_CSR_READ(WEPCTL);
|
|
|
|
unsigned int i;
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_BA) {
|
2007-08-30 22:15:25 -07:00
|
|
|
for (i = 0; i < len; i += 2) {
|
|
|
|
u16 val = buf[i] | (buf[i + 1] << 8);
|
|
|
|
adm8211_write_sram(dev, addr + i / 2, val);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < len; i += 4) {
|
|
|
|
u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) |
|
|
|
|
(buf[i + 2] << 16) | (buf[i + 3] << 24);
|
|
|
|
adm8211_write_sram(dev, addr + i / 4, val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(WEPCTL, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_clear_sram(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg = ADM8211_CSR_READ(WEPCTL);
|
|
|
|
unsigned int addr;
|
|
|
|
|
|
|
|
for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++)
|
|
|
|
adm8211_write_sram(dev, addr, 0);
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(WEPCTL, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_get_stats(struct ieee80211_hw *dev,
|
|
|
|
struct ieee80211_low_level_stats *stats)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
memcpy(stats, &priv->stats, sizeof(*stats));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_get_tx_stats(struct ieee80211_hw *dev,
|
|
|
|
struct ieee80211_tx_queue_stats *stats)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
struct ieee80211_tx_queue_stats_data *data = &stats->data[0];
|
|
|
|
|
|
|
|
data->len = priv->cur_tx - priv->dirty_tx;
|
|
|
|
data->limit = priv->tx_ring_size - 2;
|
|
|
|
data->count = priv->dirty_tx;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_interrupt_tci(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int dirty_tx;
|
|
|
|
|
|
|
|
spin_lock(&priv->lock);
|
|
|
|
|
|
|
|
for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) {
|
|
|
|
unsigned int entry = dirty_tx % priv->tx_ring_size;
|
|
|
|
u32 status = le32_to_cpu(priv->tx_ring[entry].status);
|
2007-09-24 15:10:25 -07:00
|
|
|
struct ieee80211_tx_status tx_status;
|
2007-08-30 22:15:25 -07:00
|
|
|
struct adm8211_tx_ring_info *info;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
if (status & TDES0_CONTROL_OWN ||
|
|
|
|
!(status & TDES0_CONTROL_DONE))
|
|
|
|
break;
|
|
|
|
|
|
|
|
info = &priv->tx_buffers[entry];
|
|
|
|
skb = info->skb;
|
|
|
|
|
|
|
|
/* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */
|
|
|
|
|
|
|
|
pci_unmap_single(priv->pdev, info->mapping,
|
|
|
|
info->skb->len, PCI_DMA_TODEVICE);
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
memset(&tx_status, 0, sizeof(tx_status));
|
|
|
|
skb_pull(skb, sizeof(struct adm8211_tx_hdr));
|
|
|
|
memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
|
|
|
|
memcpy(&tx_status.control, &info->tx_control,
|
|
|
|
sizeof(tx_status.control));
|
|
|
|
if (!(tx_status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
|
|
|
|
if (status & TDES0_STATUS_ES)
|
|
|
|
tx_status.excessive_retries = 1;
|
|
|
|
else
|
2007-08-30 22:15:25 -07:00
|
|
|
tx_status.flags |= IEEE80211_TX_STATUS_ACK;
|
2007-09-24 15:10:25 -07:00
|
|
|
}
|
|
|
|
ieee80211_tx_status_irqsafe(dev, skb, &tx_status);
|
|
|
|
|
2007-08-30 22:15:25 -07:00
|
|
|
info->skb = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2)
|
|
|
|
ieee80211_wake_queue(dev, 0);
|
|
|
|
|
|
|
|
priv->dirty_tx = dirty_tx;
|
|
|
|
spin_unlock(&priv->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int entry = priv->cur_rx % priv->rx_ring_size;
|
|
|
|
u32 status;
|
|
|
|
unsigned int pktlen;
|
|
|
|
struct sk_buff *skb, *newskb;
|
|
|
|
unsigned int limit = priv->rx_ring_size;
|
|
|
|
u8 rssi, rate;
|
|
|
|
|
|
|
|
while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
|
|
|
|
if (!limit--)
|
|
|
|
break;
|
|
|
|
|
|
|
|
status = le32_to_cpu(priv->rx_ring[entry].status);
|
|
|
|
rate = (status & RDES0_STATUS_RXDR) >> 12;
|
|
|
|
rssi = le32_to_cpu(priv->rx_ring[entry].length) &
|
|
|
|
RDES1_STATUS_RSSI;
|
|
|
|
|
|
|
|
pktlen = status & RDES0_STATUS_FL;
|
|
|
|
if (pktlen > RX_PKT_SIZE) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
printk(KERN_DEBUG "%s: frame too long (%d)\n",
|
|
|
|
wiphy_name(dev->wiphy), pktlen);
|
|
|
|
pktlen = RX_PKT_SIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) {
|
|
|
|
skb = NULL; /* old buffer will be reused */
|
|
|
|
/* TODO: update RX error stats */
|
|
|
|
/* TODO: check RDES0_STATUS_CRC*E */
|
|
|
|
} else if (pktlen < RX_COPY_BREAK) {
|
|
|
|
skb = dev_alloc_skb(pktlen);
|
|
|
|
if (skb) {
|
|
|
|
pci_dma_sync_single_for_cpu(
|
|
|
|
priv->pdev,
|
|
|
|
priv->rx_buffers[entry].mapping,
|
|
|
|
pktlen, PCI_DMA_FROMDEVICE);
|
|
|
|
memcpy(skb_put(skb, pktlen),
|
|
|
|
skb_tail_pointer(priv->rx_buffers[entry].skb),
|
|
|
|
pktlen);
|
|
|
|
pci_dma_sync_single_for_device(
|
|
|
|
priv->pdev,
|
|
|
|
priv->rx_buffers[entry].mapping,
|
|
|
|
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
newskb = dev_alloc_skb(RX_PKT_SIZE);
|
|
|
|
if (newskb) {
|
|
|
|
skb = priv->rx_buffers[entry].skb;
|
|
|
|
skb_put(skb, pktlen);
|
|
|
|
pci_unmap_single(
|
|
|
|
priv->pdev,
|
|
|
|
priv->rx_buffers[entry].mapping,
|
|
|
|
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
|
|
|
|
priv->rx_buffers[entry].skb = newskb;
|
|
|
|
priv->rx_buffers[entry].mapping =
|
|
|
|
pci_map_single(priv->pdev,
|
|
|
|
skb_tail_pointer(newskb),
|
|
|
|
RX_PKT_SIZE,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
} else {
|
|
|
|
skb = NULL;
|
|
|
|
/* TODO: update rx dropped stats */
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->rx_ring[entry].buffer1 =
|
|
|
|
cpu_to_le32(priv->rx_buffers[entry].mapping);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN |
|
|
|
|
RDES0_STATUS_SQL);
|
|
|
|
priv->rx_ring[entry].length =
|
|
|
|
cpu_to_le32(RX_PKT_SIZE |
|
|
|
|
(entry == priv->rx_ring_size - 1 ?
|
|
|
|
RDES1_CONTROL_RER : 0));
|
|
|
|
|
|
|
|
if (skb) {
|
|
|
|
struct ieee80211_rx_status rx_status = {0};
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
rx_status.ssi = rssi;
|
|
|
|
else
|
|
|
|
rx_status.ssi = 100 - rssi;
|
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
rx_status.rate_idx = rate;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
|
|
|
|
rx_status.band = IEEE80211_BAND_2GHZ;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
ieee80211_rx_irqsafe(dev, skb, &rx_status);
|
|
|
|
}
|
|
|
|
|
|
|
|
entry = (++priv->cur_rx) % priv->rx_ring_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TODO: check LPC and update stats? */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
#define ADM8211_INT(x) \
|
|
|
|
do { \
|
|
|
|
if (unlikely(stsr & ADM8211_STSR_ ## x)) \
|
|
|
|
printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
struct ieee80211_hw *dev = dev_id;
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
2007-09-24 15:10:25 -07:00
|
|
|
u32 stsr = ADM8211_CSR_READ(STSR);
|
|
|
|
ADM8211_CSR_WRITE(STSR, stsr);
|
|
|
|
if (stsr == 0xffffffff)
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS)))
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
if (stsr & ADM8211_STSR_RCI)
|
|
|
|
adm8211_interrupt_rci(dev);
|
|
|
|
if (stsr & ADM8211_STSR_TCI)
|
|
|
|
adm8211_interrupt_tci(dev);
|
|
|
|
|
|
|
|
ADM8211_INT(PCF);
|
|
|
|
ADM8211_INT(BCNTC);
|
|
|
|
ADM8211_INT(GPINT);
|
|
|
|
ADM8211_INT(ATIMTC);
|
|
|
|
ADM8211_INT(TSFTF);
|
|
|
|
ADM8211_INT(TSCZ);
|
|
|
|
ADM8211_INT(SQL);
|
|
|
|
ADM8211_INT(WEPTD);
|
|
|
|
ADM8211_INT(ATIME);
|
|
|
|
ADM8211_INT(TEIS);
|
|
|
|
ADM8211_INT(FBE);
|
|
|
|
ADM8211_INT(REIS);
|
|
|
|
ADM8211_INT(GPTT);
|
|
|
|
ADM8211_INT(RPS);
|
|
|
|
ADM8211_INT(RDU);
|
|
|
|
ADM8211_INT(TUF);
|
|
|
|
ADM8211_INT(TPS);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
#undef ADM8211_INT
|
|
|
|
}
|
|
|
|
|
|
|
|
#define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\
|
|
|
|
static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \
|
|
|
|
u16 addr, u32 value) { \
|
|
|
|
struct adm8211_priv *priv = dev->priv; \
|
|
|
|
unsigned int i; \
|
|
|
|
u32 reg, bitbuf; \
|
|
|
|
\
|
|
|
|
value &= v_mask; \
|
|
|
|
addr &= a_mask; \
|
|
|
|
bitbuf = (value << v_shift) | (addr << a_shift); \
|
|
|
|
\
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
\
|
|
|
|
if (prewrite) { \
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
for (i = 0; i <= bits; i++) { \
|
|
|
|
if (bitbuf & (1 << (bits - i))) \
|
|
|
|
reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \
|
|
|
|
else \
|
|
|
|
reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \
|
|
|
|
\
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, reg); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
\
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
if (postwrite == 1) { \
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
} \
|
|
|
|
if (postwrite == 2) { \
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
} \
|
|
|
|
\
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, 0); \
|
|
|
|
ADM8211_CSR_READ(SYNRF); \
|
|
|
|
}
|
|
|
|
|
|
|
|
WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1)
|
|
|
|
WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1)
|
|
|
|
WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1)
|
|
|
|
WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2)
|
|
|
|
|
|
|
|
#undef WRITE_SYN
|
|
|
|
|
|
|
|
static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int timeout;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
timeout = 10;
|
|
|
|
while (timeout > 0) {
|
|
|
|
reg = ADM8211_CSR_READ(BBPCTL);
|
|
|
|
if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD)))
|
|
|
|
break;
|
|
|
|
timeout--;
|
|
|
|
msleep(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (timeout == 0) {
|
|
|
|
printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
|
|
|
|
" prewrite (reg=0x%08x)\n",
|
|
|
|
wiphy_name(dev->wiphy), addr, data, reg);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (priv->bbp_type) {
|
|
|
|
case ADM8211_TYPE_INTERSIL:
|
|
|
|
reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */
|
|
|
|
break;
|
|
|
|
case ADM8211_TYPE_RFMD:
|
|
|
|
reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
|
|
|
|
(0x01 << 18);
|
|
|
|
break;
|
|
|
|
case ADM8211_TYPE_ADMTEK:
|
|
|
|
reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
|
|
|
|
(0x05 << 18);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
reg |= ADM8211_BBPCTL_WR | (addr << 8) | data;
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(BBPCTL, reg);
|
|
|
|
|
|
|
|
timeout = 10;
|
|
|
|
while (timeout > 0) {
|
|
|
|
reg = ADM8211_CSR_READ(BBPCTL);
|
|
|
|
if (!(reg & ADM8211_BBPCTL_WR))
|
|
|
|
break;
|
|
|
|
timeout--;
|
|
|
|
msleep(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (timeout == 0) {
|
|
|
|
ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
|
|
|
|
~ADM8211_BBPCTL_WR);
|
|
|
|
printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
|
|
|
|
" postwrite (reg=0x%08x)\n",
|
|
|
|
wiphy_name(dev->wiphy), addr, data, reg);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
|
|
|
|
{
|
|
|
|
static const u32 adm8211_rfmd2958_reg5[] =
|
|
|
|
{0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340,
|
|
|
|
0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7};
|
|
|
|
static const u32 adm8211_rfmd2958_reg6[] =
|
|
|
|
{0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000,
|
|
|
|
0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745};
|
|
|
|
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u8 ant_power = priv->ant_power > 0x3F ?
|
|
|
|
priv->eeprom->antenna_power[chan - 1] : priv->ant_power;
|
|
|
|
u8 tx_power = priv->tx_power > 0x3F ?
|
|
|
|
priv->eeprom->tx_power[chan - 1] : priv->tx_power;
|
|
|
|
u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ?
|
|
|
|
priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff;
|
|
|
|
u8 lnags_thresh = priv->lnags_threshold == 0xFF ?
|
|
|
|
priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
ADM8211_IDLE();
|
|
|
|
|
|
|
|
/* Program synthesizer to new channel */
|
|
|
|
switch (priv->transceiver_type) {
|
|
|
|
case ADM8211_RFMD2958:
|
|
|
|
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007);
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033);
|
|
|
|
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x05,
|
|
|
|
adm8211_rfmd2958_reg5[chan - 1]);
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x06,
|
|
|
|
adm8211_rfmd2958_reg6[chan - 1]);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_RFMD2948:
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF,
|
|
|
|
SI4126_MAIN_XINDIV2);
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN,
|
|
|
|
SI4126_POWERDOWN_PDIB |
|
|
|
|
SI4126_POWERDOWN_PDRB);
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0);
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV,
|
|
|
|
(chan == 14 ?
|
|
|
|
2110 : (2033 + (chan * 5))));
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496);
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44);
|
|
|
|
adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_MAX2820:
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x3,
|
|
|
|
(chan == 14 ? 0x054 : (0x7 + (chan * 5))));
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_AL2210L:
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x0,
|
|
|
|
(chan == 14 ? 0x229B4 : (0x22967 + (chan * 5))));
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
printk(KERN_DEBUG "%s: unsupported transceiver type %d\n",
|
|
|
|
wiphy_name(dev->wiphy), priv->transceiver_type);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* write BBP regs */
|
|
|
|
if (priv->bbp_type == ADM8211_TYPE_RFMD) {
|
|
|
|
|
|
|
|
/* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */
|
|
|
|
/* TODO: remove if SMC 2635W doesn't need this */
|
|
|
|
if (priv->transceiver_type == ADM8211_RFMD2948) {
|
|
|
|
reg = ADM8211_CSR_READ(GPIO);
|
|
|
|
reg &= 0xfffc0000;
|
|
|
|
reg |= ADM8211_CSR_GPIO_EN0;
|
|
|
|
if (chan != 14)
|
|
|
|
reg |= ADM8211_CSR_GPIO_O0;
|
|
|
|
ADM8211_CSR_WRITE(GPIO, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->transceiver_type == ADM8211_RFMD2958) {
|
|
|
|
/* set PCNT2 */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100);
|
|
|
|
/* set PCNT1 P_DESIRED/MID_BIAS */
|
|
|
|
reg = le16_to_cpu(priv->eeprom->cr49);
|
|
|
|
reg >>= 13;
|
|
|
|
reg <<= 15;
|
|
|
|
reg |= ant_power << 9;
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg);
|
|
|
|
/* set TXRX TX_GAIN */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 |
|
2007-09-24 15:10:25 -07:00
|
|
|
(priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0));
|
2007-08-30 22:15:25 -07:00
|
|
|
} else {
|
|
|
|
reg = ADM8211_CSR_READ(PLCPHD);
|
|
|
|
reg &= 0xff00ffff;
|
|
|
|
reg |= tx_power << 18;
|
|
|
|
ADM8211_CSR_WRITE(PLCPHD, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
|
|
|
|
ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
|
|
|
|
ADM8211_CSR_READ(SYNRF);
|
|
|
|
msleep(30);
|
|
|
|
|
|
|
|
/* RF3000 BBP */
|
|
|
|
if (priv->transceiver_type != ADM8211_RFMD2958)
|
|
|
|
adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT,
|
|
|
|
tx_power<<2);
|
|
|
|
adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff);
|
|
|
|
adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh);
|
2007-09-24 15:10:25 -07:00
|
|
|
adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ?
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->eeprom->cr28 : 0);
|
|
|
|
adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, 0);
|
|
|
|
|
|
|
|
/* Nothing to do for ADMtek BBP */
|
|
|
|
} else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
|
|
|
|
printk(KERN_DEBUG "%s: unsupported BBP type %d\n",
|
|
|
|
wiphy_name(dev->wiphy), priv->bbp_type);
|
|
|
|
|
|
|
|
ADM8211_RESTORE();
|
|
|
|
|
|
|
|
/* update current channel for adhoc (and maybe AP mode) */
|
|
|
|
reg = ADM8211_CSR_READ(CAP0);
|
|
|
|
reg &= ~0xF;
|
|
|
|
reg |= chan;
|
|
|
|
ADM8211_CSR_WRITE(CAP0, reg);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_update_mode(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
ADM8211_IDLE();
|
|
|
|
|
|
|
|
priv->soft_rx_crc = 0;
|
|
|
|
switch (priv->mode) {
|
|
|
|
case IEEE80211_IF_TYPE_STA:
|
|
|
|
priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA);
|
|
|
|
priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_IBSS:
|
|
|
|
priv->nar &= ~ADM8211_NAR_PR;
|
|
|
|
priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR;
|
|
|
|
|
|
|
|
/* don't trust the error bits on rev 0x20 and up in adhoc */
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision >= ADM8211_REV_BA)
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->soft_rx_crc = 1;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IF_TYPE_MNTR:
|
|
|
|
priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST);
|
|
|
|
priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_RESTORE();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_hw_init_syn(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
switch (priv->transceiver_type) {
|
|
|
|
case ADM8211_RFMD2958:
|
|
|
|
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
|
|
|
|
/* comments taken from ADMtek vendor driver */
|
|
|
|
|
|
|
|
/* Reset RF2958 after power on */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000);
|
|
|
|
/* Initialize RF VCO Core Bias to maximum */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F);
|
|
|
|
/* Initialize IF PLL */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03);
|
|
|
|
/* Initialize IF PLL Coarse Tuning */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F);
|
|
|
|
/* Initialize RF PLL */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403);
|
|
|
|
/* Initialize RF PLL Coarse Tuning */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F);
|
|
|
|
/* Initialize TX gain and filter BW (R9) */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x09,
|
|
|
|
(priv->transceiver_type == ADM8211_RFMD2958 ?
|
|
|
|
0x10050 : 0x00050));
|
|
|
|
/* Initialize CAL register */
|
|
|
|
adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_MAX2820:
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E);
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x2, 0x001);
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x3, 0x054);
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x4, 0x310);
|
|
|
|
adm8211_rf_write_syn_max2820(dev, 0x5, 0x000);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_AL2210L:
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000);
|
|
|
|
adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_RFMD2948:
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
/* write addresses */
|
|
|
|
if (priv->bbp_type == ADM8211_TYPE_INTERSIL) {
|
|
|
|
ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A);
|
|
|
|
ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E);
|
|
|
|
ADM8211_CSR_WRITE(MMIRD1, 0x00100000);
|
|
|
|
} else if (priv->bbp_type == ADM8211_TYPE_RFMD ||
|
|
|
|
priv->bbp_type == ADM8211_TYPE_ADMTEK) {
|
|
|
|
/* check specific BBP type */
|
|
|
|
switch (priv->specific_bbptype) {
|
|
|
|
case ADM8211_BBP_RFMD3000:
|
|
|
|
case ADM8211_BBP_RFMD3002:
|
|
|
|
ADM8211_CSR_WRITE(MMIWA, 0x00009101);
|
|
|
|
ADM8211_CSR_WRITE(MMIRD0, 0x00000301);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_BBP_ADM8011:
|
|
|
|
ADM8211_CSR_WRITE(MMIWA, 0x00008903);
|
|
|
|
ADM8211_CSR_WRITE(MMIRD0, 0x00001716);
|
|
|
|
|
|
|
|
reg = ADM8211_CSR_READ(BBPCTL);
|
|
|
|
reg &= ~ADM8211_BBPCTL_TYPE;
|
|
|
|
reg |= 0x5 << 18;
|
|
|
|
ADM8211_CSR_WRITE(BBPCTL, reg);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
switch (priv->pdev->revision) {
|
2007-08-30 22:15:25 -07:00
|
|
|
case ADM8211_REV_CA:
|
|
|
|
if (priv->transceiver_type == ADM8211_RFMD2958 ||
|
|
|
|
priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
|
|
|
|
priv->transceiver_type == ADM8211_RFMD2948)
|
|
|
|
ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22);
|
|
|
|
else if (priv->transceiver_type == ADM8211_MAX2820 ||
|
|
|
|
priv->transceiver_type == ADM8211_AL2210L)
|
|
|
|
ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_REV_BA:
|
|
|
|
reg = ADM8211_CSR_READ(MMIRD1);
|
|
|
|
reg &= 0x0000FFFF;
|
|
|
|
reg |= 0x7e100000;
|
|
|
|
ADM8211_CSR_WRITE(MMIRD1, reg);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_REV_AB:
|
|
|
|
case ADM8211_REV_AF:
|
|
|
|
default:
|
|
|
|
ADM8211_CSR_WRITE(MMIRD1, 0x7e100000);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* For RFMD */
|
|
|
|
ADM8211_CSR_WRITE(MACTEST, 0x800);
|
|
|
|
}
|
|
|
|
|
|
|
|
adm8211_hw_init_syn(dev);
|
|
|
|
|
|
|
|
/* Set RF Power control IF pin to PE1+PHYRST# */
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
|
|
|
|
ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
|
|
|
|
ADM8211_CSR_READ(SYNRF);
|
|
|
|
msleep(20);
|
|
|
|
|
|
|
|
/* write BBP regs */
|
|
|
|
if (priv->bbp_type == ADM8211_TYPE_RFMD) {
|
|
|
|
/* RF3000 BBP */
|
|
|
|
/* another set:
|
|
|
|
* 11: c8
|
|
|
|
* 14: 14
|
|
|
|
* 15: 50 (chan 1..13; chan 14: d0)
|
|
|
|
* 1c: 00
|
|
|
|
* 1d: 84
|
|
|
|
*/
|
|
|
|
adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80);
|
|
|
|
/* antenna selection: diversity */
|
|
|
|
adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80);
|
|
|
|
adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74);
|
|
|
|
adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38);
|
|
|
|
adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40);
|
|
|
|
|
|
|
|
if (priv->eeprom->major_version < 2) {
|
|
|
|
adm8211_write_bbp(dev, 0x1c, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x1d, 0x80);
|
|
|
|
} else {
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision == ADM8211_REV_BA)
|
2007-08-30 22:15:25 -07:00
|
|
|
adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28);
|
|
|
|
else
|
|
|
|
adm8211_write_bbp(dev, 0x1c, 0x00);
|
|
|
|
|
|
|
|
adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
|
|
|
|
}
|
|
|
|
} else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) {
|
|
|
|
/* reset baseband */
|
|
|
|
adm8211_write_bbp(dev, 0x00, 0xFF);
|
|
|
|
/* antenna selection: diversity */
|
|
|
|
adm8211_write_bbp(dev, 0x07, 0x0A);
|
|
|
|
|
|
|
|
/* TODO: find documentation for this */
|
|
|
|
switch (priv->transceiver_type) {
|
|
|
|
case ADM8211_RFMD2958:
|
|
|
|
case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
|
|
|
|
adm8211_write_bbp(dev, 0x00, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x01, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x02, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x03, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x06, 0x0f);
|
|
|
|
adm8211_write_bbp(dev, 0x09, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0a, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0b, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0c, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0f, 0xAA);
|
|
|
|
adm8211_write_bbp(dev, 0x10, 0x8c);
|
|
|
|
adm8211_write_bbp(dev, 0x11, 0x43);
|
|
|
|
adm8211_write_bbp(dev, 0x18, 0x40);
|
|
|
|
adm8211_write_bbp(dev, 0x20, 0x23);
|
|
|
|
adm8211_write_bbp(dev, 0x21, 0x02);
|
|
|
|
adm8211_write_bbp(dev, 0x22, 0x28);
|
|
|
|
adm8211_write_bbp(dev, 0x23, 0x30);
|
|
|
|
adm8211_write_bbp(dev, 0x24, 0x2d);
|
|
|
|
adm8211_write_bbp(dev, 0x28, 0x35);
|
|
|
|
adm8211_write_bbp(dev, 0x2a, 0x8c);
|
|
|
|
adm8211_write_bbp(dev, 0x2b, 0x81);
|
|
|
|
adm8211_write_bbp(dev, 0x2c, 0x44);
|
|
|
|
adm8211_write_bbp(dev, 0x2d, 0x0A);
|
|
|
|
adm8211_write_bbp(dev, 0x29, 0x40);
|
|
|
|
adm8211_write_bbp(dev, 0x60, 0x08);
|
|
|
|
adm8211_write_bbp(dev, 0x64, 0x01);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_MAX2820:
|
|
|
|
adm8211_write_bbp(dev, 0x00, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x01, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x02, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x03, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x06, 0x0f);
|
|
|
|
adm8211_write_bbp(dev, 0x09, 0x05);
|
|
|
|
adm8211_write_bbp(dev, 0x0a, 0x02);
|
|
|
|
adm8211_write_bbp(dev, 0x0b, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0c, 0x0f);
|
|
|
|
adm8211_write_bbp(dev, 0x0f, 0x55);
|
|
|
|
adm8211_write_bbp(dev, 0x10, 0x8d);
|
|
|
|
adm8211_write_bbp(dev, 0x11, 0x43);
|
|
|
|
adm8211_write_bbp(dev, 0x18, 0x4a);
|
|
|
|
adm8211_write_bbp(dev, 0x20, 0x20);
|
|
|
|
adm8211_write_bbp(dev, 0x21, 0x02);
|
|
|
|
adm8211_write_bbp(dev, 0x22, 0x23);
|
|
|
|
adm8211_write_bbp(dev, 0x23, 0x30);
|
|
|
|
adm8211_write_bbp(dev, 0x24, 0x2d);
|
|
|
|
adm8211_write_bbp(dev, 0x2a, 0x8c);
|
|
|
|
adm8211_write_bbp(dev, 0x2b, 0x81);
|
|
|
|
adm8211_write_bbp(dev, 0x2c, 0x44);
|
|
|
|
adm8211_write_bbp(dev, 0x29, 0x4a);
|
|
|
|
adm8211_write_bbp(dev, 0x60, 0x2b);
|
|
|
|
adm8211_write_bbp(dev, 0x64, 0x01);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_AL2210L:
|
|
|
|
adm8211_write_bbp(dev, 0x00, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x01, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x02, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x03, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x06, 0x0f);
|
|
|
|
adm8211_write_bbp(dev, 0x07, 0x05);
|
|
|
|
adm8211_write_bbp(dev, 0x08, 0x03);
|
|
|
|
adm8211_write_bbp(dev, 0x09, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0a, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0b, 0x00);
|
|
|
|
adm8211_write_bbp(dev, 0x0c, 0x10);
|
|
|
|
adm8211_write_bbp(dev, 0x0f, 0x55);
|
|
|
|
adm8211_write_bbp(dev, 0x10, 0x8d);
|
|
|
|
adm8211_write_bbp(dev, 0x11, 0x43);
|
|
|
|
adm8211_write_bbp(dev, 0x18, 0x4a);
|
|
|
|
adm8211_write_bbp(dev, 0x20, 0x20);
|
|
|
|
adm8211_write_bbp(dev, 0x21, 0x02);
|
|
|
|
adm8211_write_bbp(dev, 0x22, 0x23);
|
|
|
|
adm8211_write_bbp(dev, 0x23, 0x30);
|
|
|
|
adm8211_write_bbp(dev, 0x24, 0x2d);
|
|
|
|
adm8211_write_bbp(dev, 0x2a, 0xaa);
|
|
|
|
adm8211_write_bbp(dev, 0x2b, 0x81);
|
|
|
|
adm8211_write_bbp(dev, 0x2c, 0x44);
|
|
|
|
adm8211_write_bbp(dev, 0x29, 0xfa);
|
|
|
|
adm8211_write_bbp(dev, 0x60, 0x2d);
|
|
|
|
adm8211_write_bbp(dev, 0x64, 0x01);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ADM8211_RFMD2948:
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
printk(KERN_DEBUG "%s: unsupported transceiver %d\n",
|
|
|
|
wiphy_name(dev->wiphy), priv->transceiver_type);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
printk(KERN_DEBUG "%s: unsupported BBP %d\n",
|
|
|
|
wiphy_name(dev->wiphy), priv->bbp_type);
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, 0);
|
|
|
|
|
|
|
|
/* Set RF CAL control source to MAC control */
|
|
|
|
reg = ADM8211_CSR_READ(SYNCTL);
|
|
|
|
reg |= ADM8211_SYNCTL_SELCAL;
|
|
|
|
ADM8211_CSR_WRITE(SYNCTL, reg);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* configures hw beacons/probe responses */
|
|
|
|
static int adm8211_set_rate(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg;
|
|
|
|
int i = 0;
|
|
|
|
u8 rate_buf[12] = {0};
|
|
|
|
|
|
|
|
/* write supported rates */
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision != ADM8211_REV_BA) {
|
2007-08-30 22:15:25 -07:00
|
|
|
rate_buf[0] = ARRAY_SIZE(adm8211_rates);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
|
2008-01-24 11:38:38 -07:00
|
|
|
rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
|
2007-08-30 22:15:25 -07:00
|
|
|
} else {
|
|
|
|
/* workaround for rev BA specific bug */
|
|
|
|
rate_buf[0] = 0x04;
|
|
|
|
rate_buf[1] = 0x82;
|
|
|
|
rate_buf[2] = 0x04;
|
|
|
|
rate_buf[3] = 0x0b;
|
|
|
|
rate_buf[4] = 0x16;
|
|
|
|
}
|
|
|
|
|
|
|
|
adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf,
|
|
|
|
ARRAY_SIZE(adm8211_rates) + 1);
|
|
|
|
|
|
|
|
reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */
|
|
|
|
reg |= 1 << 15; /* short preamble */
|
|
|
|
reg |= 110 << 24;
|
|
|
|
ADM8211_CSR_WRITE(PLCPHD, reg);
|
|
|
|
|
|
|
|
/* MTMLT = 512 TU (max TX MSDU lifetime)
|
|
|
|
* BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate)
|
|
|
|
* SRTYLIM = 224 (short retry limit, TX header value is default) */
|
|
|
|
ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_hw_init(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg;
|
|
|
|
u8 cline;
|
|
|
|
|
2008-02-20 04:06:47 -07:00
|
|
|
reg = ADM8211_CSR_READ(PAR);
|
2007-08-30 22:15:25 -07:00
|
|
|
reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
|
|
|
|
reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
|
|
|
|
|
|
|
|
if (!pci_set_mwi(priv->pdev)) {
|
|
|
|
reg |= 0x1 << 24;
|
|
|
|
pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
|
|
|
|
|
|
|
|
switch (cline) {
|
|
|
|
case 0x8: reg |= (0x1 << 14);
|
|
|
|
break;
|
|
|
|
case 0x16: reg |= (0x2 << 14);
|
|
|
|
break;
|
|
|
|
case 0x32: reg |= (0x3 << 14);
|
|
|
|
break;
|
|
|
|
default: reg |= (0x0 << 14);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(PAR, reg);
|
|
|
|
|
|
|
|
reg = ADM8211_CSR_READ(CSR_TEST1);
|
|
|
|
reg &= ~(0xF << 28);
|
|
|
|
reg |= (1 << 28) | (1 << 31);
|
|
|
|
ADM8211_CSR_WRITE(CSR_TEST1, reg);
|
|
|
|
|
|
|
|
/* lose link after 4 lost beacons */
|
|
|
|
reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE;
|
|
|
|
ADM8211_CSR_WRITE(WCSR, reg);
|
|
|
|
|
|
|
|
/* Disable APM, enable receive FIFO threshold, and set drain receive
|
|
|
|
* threshold to store-and-forward */
|
|
|
|
reg = ADM8211_CSR_READ(CMDR);
|
|
|
|
reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT);
|
|
|
|
reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF;
|
|
|
|
ADM8211_CSR_WRITE(CMDR, reg);
|
|
|
|
|
|
|
|
adm8211_set_rate(dev);
|
|
|
|
|
|
|
|
/* 4-bit values:
|
|
|
|
* PWR1UP = 8 * 2 ms
|
|
|
|
* PWR0PAPE = 8 us or 5 us
|
|
|
|
* PWR1PAPE = 1 us or 3 us
|
|
|
|
* PWR0TRSW = 5 us
|
|
|
|
* PWR1TRSW = 12 us
|
|
|
|
* PWR0PE2 = 13 us
|
|
|
|
* PWR1PE2 = 1 us
|
|
|
|
* PWR0TXPE = 8 or 6 */
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
ADM8211_CSR_WRITE(TOFS2, 0x8815cd18);
|
|
|
|
else
|
|
|
|
ADM8211_CSR_WRITE(TOFS2, 0x8535cd16);
|
|
|
|
|
|
|
|
/* Enable store and forward for transmit */
|
|
|
|
priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB;
|
|
|
|
ADM8211_CSR_WRITE(NAR, priv->nar);
|
|
|
|
|
|
|
|
/* Reset RF */
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO);
|
|
|
|
ADM8211_CSR_READ(SYNRF);
|
|
|
|
msleep(10);
|
|
|
|
ADM8211_CSR_WRITE(SYNRF, 0);
|
|
|
|
ADM8211_CSR_READ(SYNRF);
|
|
|
|
msleep(5);
|
|
|
|
|
|
|
|
/* Set CFP Max Duration to 0x10 TU */
|
|
|
|
reg = ADM8211_CSR_READ(CFPP);
|
|
|
|
reg &= ~(0xffff << 8);
|
|
|
|
reg |= 0x0010 << 8;
|
|
|
|
ADM8211_CSR_WRITE(CFPP, reg);
|
|
|
|
|
|
|
|
/* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us
|
|
|
|
* TUCNT = 0x3ff - Tu counter 1024 us */
|
|
|
|
ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff);
|
|
|
|
|
|
|
|
/* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us),
|
|
|
|
* DIFS=50 us, EIFS=100 us */
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision < ADM8211_REV_CA)
|
2007-08-30 22:15:25 -07:00
|
|
|
ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) |
|
|
|
|
(50 << 9) | 100);
|
|
|
|
else
|
|
|
|
ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) |
|
|
|
|
(50 << 9) | 100);
|
|
|
|
|
|
|
|
/* PCNT = 1 (MAC idle time awake/sleep, unit S)
|
|
|
|
* RMRD = 2346 * 8 + 1 us (max RX duration) */
|
|
|
|
ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769);
|
|
|
|
|
|
|
|
/* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */
|
|
|
|
ADM8211_CSR_WRITE(RSPT, 0xffffff00);
|
|
|
|
|
|
|
|
/* Initialize BBP (and SYN) */
|
|
|
|
adm8211_hw_init_bbp(dev);
|
|
|
|
|
|
|
|
/* make sure interrupts are off */
|
|
|
|
ADM8211_CSR_WRITE(IER, 0);
|
|
|
|
|
|
|
|
/* ACK interrupts */
|
|
|
|
ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR));
|
|
|
|
|
|
|
|
/* Setup WEP (turns it off for now) */
|
|
|
|
reg = ADM8211_CSR_READ(MACTEST);
|
|
|
|
reg &= ~(7 << 20);
|
|
|
|
ADM8211_CSR_WRITE(MACTEST, reg);
|
|
|
|
|
|
|
|
reg = ADM8211_CSR_READ(WEPCTL);
|
|
|
|
reg &= ~ADM8211_WEPCTL_WEPENABLE;
|
|
|
|
reg |= ADM8211_WEPCTL_WEPRXBYP;
|
|
|
|
ADM8211_CSR_WRITE(WEPCTL, reg);
|
|
|
|
|
|
|
|
/* Clear the missed-packet counter. */
|
|
|
|
ADM8211_CSR_READ(LPC);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_hw_reset(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg, tmp;
|
|
|
|
int timeout = 100;
|
|
|
|
|
|
|
|
/* Power-on issue */
|
|
|
|
/* TODO: check if this is necessary */
|
|
|
|
ADM8211_CSR_WRITE(FRCTL, 0);
|
|
|
|
|
|
|
|
/* Reset the chip */
|
|
|
|
tmp = ADM8211_CSR_READ(PAR);
|
|
|
|
ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR);
|
|
|
|
|
|
|
|
while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--)
|
|
|
|
msleep(50);
|
|
|
|
|
|
|
|
if (timeout <= 0)
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(PAR, tmp);
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
if (priv->pdev->revision == ADM8211_REV_BA &&
|
2007-08-30 22:15:25 -07:00
|
|
|
(priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
|
|
|
|
priv->transceiver_type == ADM8211_RFMD2958)) {
|
|
|
|
reg = ADM8211_CSR_READ(CSR_TEST1);
|
|
|
|
reg |= (1 << 4) | (1 << 5);
|
|
|
|
ADM8211_CSR_WRITE(CSR_TEST1, reg);
|
2007-09-24 15:10:25 -07:00
|
|
|
} else if (priv->pdev->revision == ADM8211_REV_CA) {
|
2007-08-30 22:15:25 -07:00
|
|
|
reg = ADM8211_CSR_READ(CSR_TEST1);
|
|
|
|
reg &= ~((1 << 4) | (1 << 5));
|
|
|
|
ADM8211_CSR_WRITE(CSR_TEST1, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(FRCTL, 0);
|
|
|
|
|
|
|
|
reg = ADM8211_CSR_READ(CSR_TEST0);
|
|
|
|
reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */
|
|
|
|
ADM8211_CSR_WRITE(CSR_TEST0, reg);
|
|
|
|
|
|
|
|
adm8211_clear_sram(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u64 adm8211_get_tsft(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 tsftl;
|
|
|
|
u64 tsft;
|
|
|
|
|
|
|
|
tsftl = ADM8211_CSR_READ(TSFTL);
|
|
|
|
tsft = ADM8211_CSR_READ(TSFTH);
|
|
|
|
tsft <<= 32;
|
|
|
|
tsft |= tsftl;
|
|
|
|
|
|
|
|
return tsft;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_set_interval(struct ieee80211_hw *dev,
|
|
|
|
unsigned short bi, unsigned short li)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
/* BP (beacon interval) = data->beacon_interval
|
|
|
|
* LI (listen interval) = data->listen_interval (in beacon intervals) */
|
|
|
|
reg = (bi << 16) | li;
|
|
|
|
ADM8211_CSR_WRITE(BPLI, reg);
|
|
|
|
}
|
|
|
|
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid)
|
2007-08-30 22:15:25 -07:00
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u32 reg;
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
ADM8211_CSR_WRITE(BSSID0, le32_to_cpu(*(__le32 *)bssid));
|
2007-08-30 22:15:25 -07:00
|
|
|
reg = ADM8211_CSR_READ(ABDA1);
|
|
|
|
reg &= 0x0000ffff;
|
|
|
|
reg |= (bssid[4] << 16) | (bssid[5] << 24);
|
|
|
|
ADM8211_CSR_WRITE(ABDA1, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
u8 buf[36];
|
|
|
|
|
|
|
|
if (ssid_len > 32)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
buf[0] = ssid_len;
|
|
|
|
memcpy(buf + 1, ssid, ssid_len);
|
|
|
|
adm8211_write_sram_bytes(dev, ADM8211_SRAM_SSID, buf, 33);
|
|
|
|
/* TODO: configure beacon for adhoc? */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
2008-01-24 11:38:38 -07:00
|
|
|
int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
if (channel != priv->channel) {
|
|
|
|
priv->channel = channel;
|
2007-08-30 22:15:25 -07:00
|
|
|
adm8211_rf_set_channel(dev, priv->channel);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-12-18 17:31:26 -07:00
|
|
|
static int adm8211_config_interface(struct ieee80211_hw *dev,
|
|
|
|
struct ieee80211_vif *vif,
|
2007-08-30 22:15:25 -07:00
|
|
|
struct ieee80211_if_conf *conf)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
|
|
|
|
adm8211_set_bssid(dev, conf->bssid);
|
|
|
|
memcpy(priv->bssid, conf->bssid, ETH_ALEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (conf->ssid_len != priv->ssid_len ||
|
|
|
|
memcmp(conf->ssid, priv->ssid, conf->ssid_len)) {
|
|
|
|
adm8211_set_ssid(dev, conf->ssid, conf->ssid_len);
|
|
|
|
priv->ssid_len = conf->ssid_len;
|
|
|
|
memcpy(priv->ssid, conf->ssid, conf->ssid_len);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
static void adm8211_configure_filter(struct ieee80211_hw *dev,
|
|
|
|
unsigned int changed_flags,
|
|
|
|
unsigned int *total_flags,
|
|
|
|
int mc_count, struct dev_mc_list *mclist)
|
|
|
|
{
|
|
|
|
static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int bit_nr, new_flags;
|
|
|
|
u32 mc_filter[2];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
new_flags = 0;
|
|
|
|
|
|
|
|
if (*total_flags & FIF_PROMISC_IN_BSS) {
|
|
|
|
new_flags |= FIF_PROMISC_IN_BSS;
|
|
|
|
priv->nar |= ADM8211_NAR_PR;
|
|
|
|
priv->nar &= ~ADM8211_NAR_MM;
|
|
|
|
mc_filter[1] = mc_filter[0] = ~0;
|
|
|
|
} else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
|
|
|
|
new_flags |= FIF_ALLMULTI;
|
|
|
|
priv->nar &= ~ADM8211_NAR_PR;
|
|
|
|
priv->nar |= ADM8211_NAR_MM;
|
|
|
|
mc_filter[1] = mc_filter[0] = ~0;
|
|
|
|
} else {
|
|
|
|
priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);
|
|
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
|
|
for (i = 0; i < mc_count; i++) {
|
|
|
|
if (!mclist)
|
|
|
|
break;
|
|
|
|
bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
|
|
|
|
|
|
|
|
bit_nr &= 0x3F;
|
|
|
|
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
|
|
|
|
mclist = mclist->next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_IDLE_RX();
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(MAR0, mc_filter[0]);
|
|
|
|
ADM8211_CSR_WRITE(MAR1, mc_filter[1]);
|
|
|
|
ADM8211_CSR_READ(NAR);
|
|
|
|
|
|
|
|
if (priv->nar & ADM8211_NAR_PR)
|
|
|
|
dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
|
|
|
|
else
|
|
|
|
dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
|
|
|
|
|
|
|
|
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
|
|
|
|
adm8211_set_bssid(dev, bcast);
|
|
|
|
else
|
|
|
|
adm8211_set_bssid(dev, priv->bssid);
|
|
|
|
|
|
|
|
ADM8211_RESTORE();
|
|
|
|
|
|
|
|
*total_flags = new_flags;
|
|
|
|
}
|
|
|
|
|
2007-08-30 22:15:25 -07:00
|
|
|
static int adm8211_add_interface(struct ieee80211_hw *dev,
|
|
|
|
struct ieee80211_if_init_conf *conf)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
if (priv->mode != IEEE80211_IF_TYPE_MNTR)
|
|
|
|
return -EOPNOTSUPP;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
switch (conf->type) {
|
|
|
|
case IEEE80211_IF_TYPE_STA:
|
|
|
|
priv->mode = conf->type;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
ADM8211_IDLE();
|
|
|
|
|
2007-09-24 15:10:25 -07:00
|
|
|
ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
|
|
|
|
ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
|
|
|
|
adm8211_update_mode(dev);
|
|
|
|
|
|
|
|
ADM8211_RESTORE();
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_remove_interface(struct ieee80211_hw *dev,
|
|
|
|
struct ieee80211_if_init_conf *conf)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
priv->mode = IEEE80211_IF_TYPE_MNTR;
|
2007-08-30 22:15:25 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_init_rings(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
struct adm8211_desc *desc = NULL;
|
|
|
|
struct adm8211_rx_ring_info *rx_info;
|
|
|
|
struct adm8211_tx_ring_info *tx_info;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < priv->rx_ring_size; i++) {
|
|
|
|
desc = &priv->rx_ring[i];
|
|
|
|
desc->status = 0;
|
|
|
|
desc->length = cpu_to_le32(RX_PKT_SIZE);
|
|
|
|
priv->rx_buffers[i].skb = NULL;
|
|
|
|
}
|
|
|
|
/* Mark the end of RX ring; hw returns to base address after this
|
|
|
|
* descriptor */
|
|
|
|
desc->length |= cpu_to_le32(RDES1_CONTROL_RER);
|
|
|
|
|
|
|
|
for (i = 0; i < priv->rx_ring_size; i++) {
|
|
|
|
desc = &priv->rx_ring[i];
|
|
|
|
rx_info = &priv->rx_buffers[i];
|
|
|
|
|
|
|
|
rx_info->skb = dev_alloc_skb(RX_PKT_SIZE);
|
|
|
|
if (rx_info->skb == NULL)
|
|
|
|
break;
|
|
|
|
rx_info->mapping = pci_map_single(priv->pdev,
|
|
|
|
skb_tail_pointer(rx_info->skb),
|
|
|
|
RX_PKT_SIZE,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
desc->buffer1 = cpu_to_le32(rx_info->mapping);
|
|
|
|
desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup TX ring. TX buffers descriptors will be filled in as needed */
|
|
|
|
for (i = 0; i < priv->tx_ring_size; i++) {
|
|
|
|
desc = &priv->tx_ring[i];
|
|
|
|
tx_info = &priv->tx_buffers[i];
|
|
|
|
|
|
|
|
tx_info->skb = NULL;
|
|
|
|
tx_info->mapping = 0;
|
|
|
|
desc->status = 0;
|
|
|
|
}
|
|
|
|
desc->length = cpu_to_le32(TDES1_CONTROL_TER);
|
|
|
|
|
|
|
|
priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0;
|
|
|
|
ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma);
|
|
|
|
ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_free_rings(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < priv->rx_ring_size; i++) {
|
|
|
|
if (!priv->rx_buffers[i].skb)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pci_unmap_single(
|
|
|
|
priv->pdev,
|
|
|
|
priv->rx_buffers[i].mapping,
|
|
|
|
RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
|
|
|
|
|
|
|
|
dev_kfree_skb(priv->rx_buffers[i].skb);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < priv->tx_ring_size; i++) {
|
|
|
|
if (!priv->tx_buffers[i].skb)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
pci_unmap_single(priv->pdev,
|
|
|
|
priv->tx_buffers[i].mapping,
|
|
|
|
priv->tx_buffers[i].skb->len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
|
|
|
|
dev_kfree_skb(priv->tx_buffers[i].skb);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
static int adm8211_start(struct ieee80211_hw *dev)
|
2007-08-30 22:15:25 -07:00
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* Power up MAC and RF chips */
|
|
|
|
retval = adm8211_hw_reset(dev);
|
|
|
|
if (retval) {
|
|
|
|
printk(KERN_ERR "%s: hardware reset failed\n",
|
|
|
|
wiphy_name(dev->wiphy));
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = adm8211_init_rings(dev);
|
|
|
|
if (retval) {
|
|
|
|
printk(KERN_ERR "%s: failed to initialize rings\n",
|
|
|
|
wiphy_name(dev->wiphy));
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Init hardware */
|
|
|
|
adm8211_hw_init(dev);
|
|
|
|
adm8211_rf_set_channel(dev, priv->channel);
|
|
|
|
|
|
|
|
retval = request_irq(priv->pdev->irq, &adm8211_interrupt,
|
|
|
|
IRQF_SHARED, "adm8211", dev);
|
|
|
|
if (retval) {
|
|
|
|
printk(KERN_ERR "%s: failed to register IRQ handler\n",
|
|
|
|
wiphy_name(dev->wiphy));
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE |
|
|
|
|
ADM8211_IER_RCIE | ADM8211_IER_TCIE |
|
|
|
|
ADM8211_IER_TDUIE | ADM8211_IER_GPTIE);
|
2007-09-24 15:10:25 -07:00
|
|
|
priv->mode = IEEE80211_IF_TYPE_MNTR;
|
2007-08-30 22:15:25 -07:00
|
|
|
adm8211_update_mode(dev);
|
|
|
|
ADM8211_CSR_WRITE(RDR, 0);
|
|
|
|
|
|
|
|
adm8211_set_interval(dev, 100, 10);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
static void adm8211_stop(struct ieee80211_hw *dev)
|
2007-08-30 22:15:25 -07:00
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
2007-09-28 05:01:25 -07:00
|
|
|
priv->mode = IEEE80211_IF_TYPE_INVALID;
|
2007-08-30 22:15:25 -07:00
|
|
|
priv->nar = 0;
|
|
|
|
ADM8211_CSR_WRITE(NAR, 0);
|
|
|
|
ADM8211_CSR_WRITE(IER, 0);
|
|
|
|
ADM8211_CSR_READ(NAR);
|
|
|
|
|
|
|
|
free_irq(priv->pdev->irq, dev);
|
|
|
|
|
|
|
|
adm8211_free_rings(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
|
|
|
|
int plcp_signal, int short_preamble)
|
|
|
|
{
|
|
|
|
/* Alternative calculation from NetBSD: */
|
|
|
|
|
|
|
|
/* IEEE 802.11b durations for DSSS PHY in microseconds */
|
|
|
|
#define IEEE80211_DUR_DS_LONG_PREAMBLE 144
|
|
|
|
#define IEEE80211_DUR_DS_SHORT_PREAMBLE 72
|
|
|
|
#define IEEE80211_DUR_DS_FAST_PLCPHDR 24
|
|
|
|
#define IEEE80211_DUR_DS_SLOW_PLCPHDR 48
|
|
|
|
#define IEEE80211_DUR_DS_SLOW_ACK 112
|
|
|
|
#define IEEE80211_DUR_DS_FAST_ACK 56
|
|
|
|
#define IEEE80211_DUR_DS_SLOW_CTS 112
|
|
|
|
#define IEEE80211_DUR_DS_FAST_CTS 56
|
|
|
|
#define IEEE80211_DUR_DS_SLOT 20
|
|
|
|
#define IEEE80211_DUR_DS_SIFS 10
|
|
|
|
|
|
|
|
int remainder;
|
|
|
|
|
|
|
|
*dur = (80 * (24 + payload_len) + plcp_signal - 1)
|
|
|
|
/ plcp_signal;
|
|
|
|
|
|
|
|
if (plcp_signal <= PLCP_SIGNAL_2M)
|
|
|
|
/* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */
|
|
|
|
*dur += 3 * (IEEE80211_DUR_DS_SIFS +
|
|
|
|
IEEE80211_DUR_DS_SHORT_PREAMBLE +
|
|
|
|
IEEE80211_DUR_DS_FAST_PLCPHDR) +
|
|
|
|
IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK;
|
|
|
|
else
|
|
|
|
/* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */
|
|
|
|
*dur += 3 * (IEEE80211_DUR_DS_SIFS +
|
|
|
|
IEEE80211_DUR_DS_SHORT_PREAMBLE +
|
|
|
|
IEEE80211_DUR_DS_FAST_PLCPHDR) +
|
|
|
|
IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK;
|
|
|
|
|
|
|
|
/* lengthen duration if long preamble */
|
|
|
|
if (!short_preamble)
|
|
|
|
*dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE -
|
|
|
|
IEEE80211_DUR_DS_SHORT_PREAMBLE) +
|
|
|
|
3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR -
|
|
|
|
IEEE80211_DUR_DS_FAST_PLCPHDR);
|
|
|
|
|
|
|
|
|
|
|
|
*plcp = (80 * len) / plcp_signal;
|
|
|
|
remainder = (80 * len) % plcp_signal;
|
|
|
|
if (plcp_signal == PLCP_SIGNAL_11M &&
|
|
|
|
remainder <= 30 && remainder > 0)
|
|
|
|
*plcp = (*plcp | 0x8000) + 1;
|
|
|
|
else if (remainder)
|
|
|
|
(*plcp)++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */
|
|
|
|
static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb,
|
|
|
|
u16 plcp_signal,
|
|
|
|
struct ieee80211_tx_control *control,
|
|
|
|
size_t hdrlen)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned long flags;
|
|
|
|
dma_addr_t mapping;
|
|
|
|
unsigned int entry;
|
|
|
|
u32 flag;
|
|
|
|
|
|
|
|
mapping = pci_map_single(priv->pdev, skb->data, skb->len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
|
|
|
|
if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2)
|
|
|
|
flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS;
|
|
|
|
else
|
|
|
|
flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS;
|
|
|
|
|
|
|
|
if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2)
|
|
|
|
ieee80211_stop_queue(dev, 0);
|
|
|
|
|
|
|
|
entry = priv->cur_tx % priv->tx_ring_size;
|
|
|
|
|
|
|
|
priv->tx_buffers[entry].skb = skb;
|
|
|
|
priv->tx_buffers[entry].mapping = mapping;
|
|
|
|
memcpy(&priv->tx_buffers[entry].tx_control, control, sizeof(*control));
|
|
|
|
priv->tx_buffers[entry].hdrlen = hdrlen;
|
|
|
|
priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
|
|
|
|
|
|
|
|
if (entry == priv->tx_ring_size - 1)
|
|
|
|
flag |= TDES1_CONTROL_TER;
|
|
|
|
priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len);
|
|
|
|
|
|
|
|
/* Set TX rate (SIGNAL field in PLCP PPDU format) */
|
|
|
|
flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */;
|
|
|
|
priv->tx_ring[entry].status = cpu_to_le32(flag);
|
|
|
|
|
|
|
|
priv->cur_tx++;
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
|
|
|
|
/* Trigger transmit poll */
|
|
|
|
ADM8211_CSR_WRITE(TDR, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Put adm8211_tx_hdr on skb and transmit */
|
|
|
|
static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
|
|
|
|
struct ieee80211_tx_control *control)
|
|
|
|
{
|
|
|
|
struct adm8211_tx_hdr *txhdr;
|
|
|
|
u16 fc;
|
|
|
|
size_t payload_len, hdrlen;
|
|
|
|
int plcp, dur, len, plcp_signal, short_preamble;
|
|
|
|
struct ieee80211_hdr *hdr;
|
|
|
|
|
2008-02-20 04:06:47 -07:00
|
|
|
short_preamble = !!(control->tx_rate->flags &
|
|
|
|
IEEE80211_TXCTL_SHORT_PREAMBLE);
|
|
|
|
plcp_signal = control->tx_rate->bitrate;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
hdr = (struct ieee80211_hdr *)skb->data;
|
|
|
|
fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED;
|
|
|
|
hdrlen = ieee80211_get_hdrlen(fc);
|
|
|
|
memcpy(skb->cb, skb->data, hdrlen);
|
|
|
|
hdr = (struct ieee80211_hdr *)skb->cb;
|
|
|
|
skb_pull(skb, hdrlen);
|
|
|
|
payload_len = skb->len;
|
|
|
|
|
|
|
|
txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr));
|
|
|
|
memset(txhdr, 0, sizeof(*txhdr));
|
|
|
|
memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN);
|
|
|
|
txhdr->signal = plcp_signal;
|
|
|
|
txhdr->frame_body_size = cpu_to_le16(payload_len);
|
|
|
|
txhdr->frame_control = hdr->frame_control;
|
|
|
|
|
|
|
|
len = hdrlen + payload_len + FCS_LEN;
|
|
|
|
if (fc & IEEE80211_FCTL_PROTECTED)
|
|
|
|
len += 8;
|
|
|
|
|
|
|
|
txhdr->frag = cpu_to_le16(0x0FFF);
|
|
|
|
adm8211_calc_durations(&dur, &plcp, payload_len,
|
|
|
|
len, plcp_signal, short_preamble);
|
|
|
|
txhdr->plcp_frag_head_len = cpu_to_le16(plcp);
|
|
|
|
txhdr->plcp_frag_tail_len = cpu_to_le16(plcp);
|
|
|
|
txhdr->dur_frag_head = cpu_to_le16(dur);
|
|
|
|
txhdr->dur_frag_tail = cpu_to_le16(dur);
|
|
|
|
|
|
|
|
txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER);
|
|
|
|
|
|
|
|
if (short_preamble)
|
|
|
|
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
|
|
|
|
|
|
|
|
if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
|
|
|
|
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
|
|
|
|
|
|
|
|
if (fc & IEEE80211_FCTL_PROTECTED)
|
|
|
|
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE);
|
|
|
|
|
|
|
|
txhdr->retry_limit = control->retry_limit;
|
|
|
|
|
|
|
|
adm8211_tx_raw(dev, skb, plcp_signal, control, hdrlen);
|
|
|
|
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_alloc_rings(struct ieee80211_hw *dev)
|
|
|
|
{
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
unsigned int ring_size;
|
|
|
|
|
|
|
|
priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size +
|
|
|
|
sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL);
|
|
|
|
if (!priv->rx_buffers)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv->tx_buffers = (void *)priv->rx_buffers +
|
|
|
|
sizeof(*priv->rx_buffers) * priv->rx_ring_size;
|
|
|
|
|
|
|
|
/* Allocate TX/RX descriptors */
|
|
|
|
ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size +
|
|
|
|
sizeof(struct adm8211_desc) * priv->tx_ring_size;
|
|
|
|
priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size,
|
|
|
|
&priv->rx_ring_dma);
|
|
|
|
|
|
|
|
if (!priv->rx_ring) {
|
|
|
|
kfree(priv->rx_buffers);
|
|
|
|
priv->rx_buffers = NULL;
|
|
|
|
priv->tx_buffers = NULL;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring +
|
|
|
|
priv->rx_ring_size);
|
|
|
|
priv->tx_ring_dma = priv->rx_ring_dma +
|
|
|
|
sizeof(struct adm8211_desc) * priv->rx_ring_size;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct ieee80211_ops adm8211_ops = {
|
|
|
|
.tx = adm8211_tx,
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
.start = adm8211_start,
|
2007-08-30 22:15:25 -07:00
|
|
|
.stop = adm8211_stop,
|
|
|
|
.add_interface = adm8211_add_interface,
|
|
|
|
.remove_interface = adm8211_remove_interface,
|
|
|
|
.config = adm8211_config,
|
|
|
|
.config_interface = adm8211_config_interface,
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
.configure_filter = adm8211_configure_filter,
|
2007-08-30 22:15:25 -07:00
|
|
|
.get_stats = adm8211_get_stats,
|
|
|
|
.get_tx_stats = adm8211_get_tx_stats,
|
|
|
|
.get_tsf = adm8211_get_tsft
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __devinit adm8211_probe(struct pci_dev *pdev,
|
|
|
|
const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
struct ieee80211_hw *dev;
|
|
|
|
struct adm8211_priv *priv;
|
|
|
|
unsigned long mem_addr, mem_len;
|
|
|
|
unsigned int io_addr, io_len;
|
|
|
|
int err;
|
|
|
|
u32 reg;
|
|
|
|
u8 perm_addr[ETH_ALEN];
|
2007-10-03 17:59:30 -07:00
|
|
|
DECLARE_MAC_BUF(mac);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
err = pci_enable_device(pdev);
|
|
|
|
if (err) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
io_addr = pci_resource_start(pdev, 0);
|
|
|
|
io_len = pci_resource_len(pdev, 0);
|
|
|
|
mem_addr = pci_resource_start(pdev, 1);
|
|
|
|
mem_len = pci_resource_len(pdev, 1);
|
|
|
|
if (io_len < 256 || mem_len < 1024) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Too short PCI resources\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_disable_pdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* check signature */
|
|
|
|
pci_read_config_dword(pdev, 0x80 /* CR32 */, ®);
|
|
|
|
if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n",
|
|
|
|
pci_name(pdev), reg);
|
|
|
|
goto err_disable_pdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = pci_request_regions(pdev, "adm8211");
|
|
|
|
if (err) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
return err; /* someone else grabbed it? don't disable it */
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
|
|
|
|
pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): No suitable DMA available\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_free_reg;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_set_master(pdev);
|
|
|
|
|
|
|
|
dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops);
|
|
|
|
if (!dev) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto err_free_reg;
|
|
|
|
}
|
|
|
|
priv = dev->priv;
|
|
|
|
priv->pdev = pdev;
|
|
|
|
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
|
|
|
|
SET_IEEE80211_DEV(dev, &pdev->dev);
|
|
|
|
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
|
|
|
|
priv->map = pci_iomap(pdev, 1, mem_len);
|
|
|
|
if (!priv->map)
|
|
|
|
priv->map = pci_iomap(pdev, 0, io_len);
|
|
|
|
|
|
|
|
if (!priv->map) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Cannot map device memory\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_free_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->rx_ring_size = rx_ring_size;
|
|
|
|
priv->tx_ring_size = tx_ring_size;
|
|
|
|
|
|
|
|
if (adm8211_alloc_rings(dev)) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_iounmap;
|
|
|
|
}
|
|
|
|
|
2007-12-22 11:45:50 -07:00
|
|
|
*(__le32 *)perm_addr = cpu_to_le32(ADM8211_CSR_READ(PAR0));
|
|
|
|
*(__le16 *)&perm_addr[4] =
|
|
|
|
cpu_to_le16(ADM8211_CSR_READ(PAR1) & 0xFFFF);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
if (!is_valid_ether_addr(perm_addr)) {
|
|
|
|
printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
random_ether_addr(perm_addr);
|
|
|
|
}
|
|
|
|
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
|
|
|
|
|
|
|
|
dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
|
2008-01-24 11:38:38 -07:00
|
|
|
/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
dev->channel_change_time = 1000;
|
|
|
|
dev->max_rssi = 100; /* FIXME: find better value */
|
|
|
|
|
|
|
|
dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
|
|
|
|
|
|
|
|
priv->retry_limit = 3;
|
|
|
|
priv->ant_power = 0x40;
|
|
|
|
priv->tx_power = 0x40;
|
|
|
|
priv->lpf_cutoff = 0xFF;
|
|
|
|
priv->lnags_threshold = 0xFF;
|
2007-09-28 05:01:25 -07:00
|
|
|
priv->mode = IEEE80211_IF_TYPE_INVALID;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
/* Power-on issue. EEPROM won't read correctly without */
|
2007-09-24 15:10:25 -07:00
|
|
|
if (pdev->revision >= ADM8211_REV_BA) {
|
2007-08-30 22:15:25 -07:00
|
|
|
ADM8211_CSR_WRITE(FRCTL, 0);
|
|
|
|
ADM8211_CSR_READ(FRCTL);
|
|
|
|
ADM8211_CSR_WRITE(FRCTL, 1);
|
|
|
|
ADM8211_CSR_READ(FRCTL);
|
|
|
|
msleep(100);
|
|
|
|
}
|
|
|
|
|
|
|
|
err = adm8211_read_eeprom(dev);
|
|
|
|
if (err) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_free_desc;
|
|
|
|
}
|
|
|
|
|
2008-01-24 11:38:38 -07:00
|
|
|
priv->channel = 1;
|
2007-08-30 22:15:25 -07:00
|
|
|
|
2008-02-25 03:12:18 -07:00
|
|
|
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
|
|
|
|
|
2007-08-30 22:15:25 -07:00
|
|
|
err = ieee80211_register_hw(dev);
|
|
|
|
if (err) {
|
|
|
|
printk(KERN_ERR "%s (adm8211): Cannot register device\n",
|
|
|
|
pci_name(pdev));
|
|
|
|
goto err_free_desc;
|
|
|
|
}
|
|
|
|
|
2007-10-03 17:59:30 -07:00
|
|
|
printk(KERN_INFO "%s: hwaddr %s, Rev 0x%02x\n",
|
|
|
|
wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
|
2007-09-24 15:10:25 -07:00
|
|
|
pdev->revision);
|
2007-08-30 22:15:25 -07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_free_desc:
|
|
|
|
pci_free_consistent(pdev,
|
|
|
|
sizeof(struct adm8211_desc) * priv->rx_ring_size +
|
|
|
|
sizeof(struct adm8211_desc) * priv->tx_ring_size,
|
|
|
|
priv->rx_ring, priv->rx_ring_dma);
|
|
|
|
kfree(priv->rx_buffers);
|
|
|
|
|
|
|
|
err_iounmap:
|
|
|
|
pci_iounmap(pdev, priv->map);
|
|
|
|
|
|
|
|
err_free_dev:
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
ieee80211_free_hw(dev);
|
|
|
|
|
|
|
|
err_free_reg:
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
|
|
|
|
err_disable_pdev:
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void __devexit adm8211_remove(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
|
|
|
|
struct adm8211_priv *priv;
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
ieee80211_unregister_hw(dev);
|
|
|
|
|
|
|
|
priv = dev->priv;
|
|
|
|
|
|
|
|
pci_free_consistent(pdev,
|
|
|
|
sizeof(struct adm8211_desc) * priv->rx_ring_size +
|
|
|
|
sizeof(struct adm8211_desc) * priv->tx_ring_size,
|
|
|
|
priv->rx_ring, priv->rx_ring_dma);
|
|
|
|
|
|
|
|
kfree(priv->rx_buffers);
|
|
|
|
kfree(priv->eeprom);
|
|
|
|
pci_iounmap(pdev, priv->map);
|
|
|
|
pci_release_regions(pdev);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
ieee80211_free_hw(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
|
|
{
|
|
|
|
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
2007-09-28 05:01:25 -07:00
|
|
|
if (priv->mode != IEEE80211_IF_TYPE_INVALID) {
|
2007-08-30 22:15:25 -07:00
|
|
|
ieee80211_stop_queues(dev);
|
|
|
|
adm8211_stop(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_save_state(pdev);
|
|
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int adm8211_resume(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
|
|
|
|
struct adm8211_priv *priv = dev->priv;
|
|
|
|
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
pci_restore_state(pdev);
|
|
|
|
|
2007-09-28 05:01:25 -07:00
|
|
|
if (priv->mode != IEEE80211_IF_TYPE_INVALID) {
|
[PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.
This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.
Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.
At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().
The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.
Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-16 22:29:23 -07:00
|
|
|
adm8211_start(dev);
|
2007-08-30 22:15:25 -07:00
|
|
|
ieee80211_start_queues(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table);
|
|
|
|
|
|
|
|
/* TODO: implement enable_wake */
|
|
|
|
static struct pci_driver adm8211_driver = {
|
|
|
|
.name = "adm8211",
|
|
|
|
.id_table = adm8211_pci_id_table,
|
|
|
|
.probe = adm8211_probe,
|
|
|
|
.remove = __devexit_p(adm8211_remove),
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
.suspend = adm8211_suspend,
|
|
|
|
.resume = adm8211_resume,
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int __init adm8211_init(void)
|
|
|
|
{
|
|
|
|
return pci_register_driver(&adm8211_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void __exit adm8211_exit(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&adm8211_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
module_init(adm8211_init);
|
|
|
|
module_exit(adm8211_exit);
|