kevin/linux
1
Fork 0
Code
31dd6a2672
linux/include/net/neighbour.h

368 lines
9.9 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifndef _NET_NEIGHBOUR_H
#define _NET_NEIGHBOUR_H
[NEIGH]: Move netlink neighbour bits to linux/neighbour.h Moves netlink neighbour bits to linux/neighbour.h. Also moves bits to be exported to userspace from net/neighbour.h to linux/neighbour.h and removes __KERNEL__ guards, userspace is not supposed to be using it. rtnetlink_rcv_msg() is not longer required to parse attributes for the neighbour layer, remove dependency on obsolete and buggy rta_buf. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-07 17:57:44 -07:00
#include <linux/neighbour.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Generic neighbour manipulation
*
* Authors:
* Pedro Roque <roque@di.fc.ul.pt>
* Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
*
* Changes:
*
* Harald Welte: <laforge@gnumonks.org>
* - Add neighbour cache statistics like rtstat
*/
#include <asm/atomic.h>
#include <linux/netdevice.h>
[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-26 21:43:12 -07:00
#include <linux/skbuff.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <linux/rcupdate.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/sysctl.h>
neigh: Convert garbage collection from softirq to workqueue Current neigh_periodic_timer() function is fired by timer IRQ, and scans one hash bucket each round (very litle work in fact) As we are supposed to scan whole hash table in 15 seconds, this means neigh_periodic_timer() can be fired very often. (depending on the number of concurrent hash entries we stored in this table) Converting this to a workqueue permits scanning whole table, minimizing icache pollution, and firing this work every 15 seconds, independantly of hash table size. This 15 seconds delay is not a hard number, as work is a deferrable one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-29 20:15:07 -07:00
#include <linux/workqueue.h>
[NEIGH]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 11:50:06 -07:00
#include <net/rtnetlink.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NEIGH]: Add a comment describing what a NUD stands for. When I studied the neighbor code I puzzled over what the NUD can mean for quite a long time. Finally I asked Alexey and he said that this was smth like "neighbor unreachability detection". Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 23:37:16 -07:00
/*
* NUD stands for "neighbor unreachability detection"
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define NUD_IN_TIMER (NUD_INCOMPLETE|NUD_REACHABLE|NUD_DELAY|NUD_PROBE)
#define NUD_VALID (NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE|NUD_PROBE|NUD_STALE|NUD_DELAY)
#define NUD_CONNECTED (NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE)
struct neighbour;
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct neigh_parms {
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
#ifdef CONFIG_NET_NS
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
struct net *net;
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
#endif
[NETLINK]: Neighbour table configuration and statistics via rtnetlink To retrieve the neighbour tables send RTM_GETNEIGHTBL with the NLM_F_DUMP flag set. Every neighbour table configuration is spread over multiple messages to avoid running into message size limits on systems with many interfaces. The first message in the sequence transports all not device specific data such as statistics, configuration, and the default parameter set. This message is followed by 0..n messages carrying device specific parameter sets. Although the ordering should be sufficient, NDTA_NAME can be used to identify sequences. The initial message can be identified by checking for NDTA_CONFIG. The device specific messages do not contain this TLV but have NDTPA_IFINDEX set to the corresponding interface index. To change neighbour table attributes, send RTM_SETNEIGHTBL with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3], NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked otherwise. Device specific parameter sets can be changed by setting NDTPA_IFINDEX to the interface index of the corresponding device. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-18 22:50:55 -07:00
struct net_device *dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neigh_parms *next;
int (*neigh_setup)(struct neighbour *);
[NET]: Fix neighbour destructor handling. ->neigh_destructor() is killed (not used), replaced with ->neigh_cleanup(), which is called when neighbor entry goes to dead state. At this point everything is still valid: neigh->dev, neigh->parms etc. The device should guarantee that dead neighbor entries (neigh->dead != 0) do not get private part initialized, otherwise nobody will cleanup it. I think this is enough for ipoib which is the only user of this thing. Initialization private part of neighbor entries happens in ipib start_xmit routine, which is not reached when device is down. But it would be better to add explicit test for neigh->dead in any case. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-24 12:52:16 -07:00
void (*neigh_cleanup)(struct neighbour *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neigh_table *tbl;
void *sysctl_table;
int dead;
atomic_t refcnt;
struct rcu_head rcu_head;
int base_reachable_time;
int retrans_time;
int gc_staletime;
int reachable_time;
int delay_probe_time;
int queue_len;
int ucast_probes;
int app_probes;
int mcast_probes;
int anycast_delay;
int proxy_delay;
int proxy_qlen;
int locktime;
};
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct neigh_statistics {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned long allocs; /* number of allocated neighs */
unsigned long destroys; /* number of destroyed neighs */
unsigned long hash_grows; /* number of hash resizes */
core: add stat to track unresolved discards in neighbor cache in __neigh_event_send, if we have a neighbour entry which is in NUD_INCOMPLETE state, we enqueue any outbound frames to that neighbour to the neighbours arp_queue, which is default capped to a length of 3 skbs. If that queue exceeds its set length, it will drop an skb on the queue to enqueue the newly arrived skb. This results in a drop for which we have no statistics incremented. This patch adds an unresolved_discards stat to /proc/net/stat/ndisc_cache to track these lost frames. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16 20:50:49 -07:00
unsigned long res_failed; /* number of failed resolutions */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned long lookups; /* number of lookups */
unsigned long hits; /* number of hits (among lookups) */
unsigned long rcv_probes_mcast; /* number of received mcast ipv6 */
unsigned long rcv_probes_ucast; /* number of received ucast ipv6 */
unsigned long periodic_gc_runs; /* number of periodic GC runs */
unsigned long forced_gc_runs; /* number of forced GC runs */
core: add stat to track unresolved discards in neighbor cache in __neigh_event_send, if we have a neighbour entry which is in NUD_INCOMPLETE state, we enqueue any outbound frames to that neighbour to the neighbours arp_queue, which is default capped to a length of 3 skbs. If that queue exceeds its set length, it will drop an skb on the queue to enqueue the newly arrived skb. This results in a drop for which we have no statistics incremented. This patch adds an unresolved_discards stat to /proc/net/stat/ndisc_cache to track these lost frames. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16 20:50:49 -07:00
unsigned long unres_discards; /* number of unresolved drops */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
};
this_cpu: Use this_cpu ops for network statistics Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-10-03 03:48:22 -07:00
#define NEIGH_CACHE_STAT_INC(tbl, field) this_cpu_inc((tbl)->stats->field)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct neighbour {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neighbour *next;
struct neigh_table *tbl;
struct neigh_parms *parms;
struct net_device *dev;
unsigned long used;
unsigned long confirmed;
unsigned long updated;
__u8 flags;
__u8 nud_state;
__u8 type;
__u8 dead;
atomic_t probes;
rwlock_t lock;
[NEIGHBOUR]: Use ALIGN() macro. Rather than opencoding the mask, it looks better to use ALIGN() macro from kernel.h. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-10 23:03:23 -07:00
unsigned char ha[ALIGN(MAX_ADDR_LEN, sizeof(unsigned long))];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct hh_cache *hh;
atomic_t refcnt;
int (*output)(struct sk_buff *skb);
struct sk_buff_head arp_queue;
struct timer_list timer;
net: make neigh_ops constant These tables are never modified at runtime. Move to read-only section. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 04:13:19 -07:00
const struct neigh_ops *ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u8 primary_key[0];
};
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct neigh_ops {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int family;
void (*solicit)(struct neighbour *, struct sk_buff*);
void (*error_report)(struct neighbour *, struct sk_buff*);
int (*output)(struct sk_buff*);
int (*connected_output)(struct sk_buff*);
int (*hh_output)(struct sk_buff*);
int (*queue_xmit)(struct sk_buff*);
};
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct pneigh_entry {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct pneigh_entry *next;
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
#ifdef CONFIG_NET_NS
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
struct net *net;
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
#endif
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
struct net_device *dev;
[IPV6] NDISC: Set per-entry is_router flag in Proxy NA. We have sent NA with router flag from the node-wide forwarding configuration. This is not appropriate for proxy NA, and it should be set according to each proxy entry's configuration. This is used by Mobile IPv6 home agent to support physical home link in acting as a proxy router for mobile node which is not a router, for example. Based on MIPL2 kernel patch. Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22 14:43:19 -07:00
u8 flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u8 key[0];
};
/*
* neighbour table manipulation
*/
net: cleanup include/net This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 20:26:03 -07:00
struct neigh_table {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neigh_table *next;
int family;
int entry_size;
int key_len;
__u32 (*hash)(const void *pkey, const struct net_device *);
int (*constructor)(struct neighbour *);
int (*pconstructor)(struct pneigh_entry *);
void (*pdestructor)(struct pneigh_entry *);
void (*proxy_redo)(struct sk_buff *skb);
char *id;
struct neigh_parms parms;
/* HACK. gc_* shoul follow parms without a gap! */
int gc_interval;
int gc_thresh1;
int gc_thresh2;
int gc_thresh3;
unsigned long last_flush;
neigh: Convert garbage collection from softirq to workqueue Current neigh_periodic_timer() function is fired by timer IRQ, and scans one hash bucket each round (very litle work in fact) As we are supposed to scan whole hash table in 15 seconds, this means neigh_periodic_timer() can be fired very often. (depending on the number of concurrent hash entries we stored in this table) Converting this to a workqueue permits scanning whole table, minimizing icache pollution, and firing this work every 15 seconds, independantly of hash table size. This 15 seconds delay is not a hard number, as work is a deferrable one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-29 20:15:07 -07:00
struct delayed_work gc_work;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct timer_list proxy_timer;
struct sk_buff_head proxy_queue;
atomic_t entries;
rwlock_t lock;
unsigned long last_rand;
[PATCH] slab: remove kmem_cache_t Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06 21:33:20 -07:00
struct kmem_cache *kmem_cachep;
percpu: add __percpu sparse annotations to net Add __percpu sparse annotations to net. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. The macro and type tricks around snmp stats make things a bit interesting. DEFINE/DECLARE_SNMP_STAT() macros mark the target field as __percpu and SNMP_UPD_PO_STATS() macro is updated accordingly. All snmp_mib_*() users which used to cast the argument to (void **) are updated to cast it to (void __percpu **). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16 08:20:26 -07:00
struct neigh_statistics __percpu *stats;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neighbour **hash_buckets;
unsigned int hash_mask;
__u32 hash_rnd;
struct pneigh_entry **phash_buckets;
};
/* flags for neigh_update() */
#define NEIGH_UPDATE_F_OVERRIDE 0x00000001
#define NEIGH_UPDATE_F_WEAK_OVERRIDE 0x00000002
#define NEIGH_UPDATE_F_OVERRIDE_ISROUTER 0x00000004
#define NEIGH_UPDATE_F_ISROUTER 0x40000000
#define NEIGH_UPDATE_F_ADMIN 0x80000000
extern void neigh_table_init(struct neigh_table *tbl);
[NEIGH]: Fix IP-over-ATM and ARP interaction. The classical IP over ATM code maintains its own IPv4 <-> <ATM stuff> ARP table, using the standard neighbour-table code. The neigh_table_init function adds this neighbour table to a linked list of all neighbor tables which is used by the functions neigh_delete() neigh_add() and neightbl_set(), all called by the netlink code. Once the ATM neighbour table is added to the list, there are two tables with family == AF_INET there, and ARP entries sent via netlink go into the first table with matching family. This is indeterminate and often wrong. To see the bug, on a kernel with CLIP enabled, create a standard IPv4 ARP entry by pinging an unused address on a local subnet. Then attempt to complete that entry by doing ip neigh replace <ip address> lladdr <some mac address> nud reachable Looking at the ARP tables by using ip neigh show will reveal two ARP entries for the same address. One of these can be found in /proc/net/arp, and the other in /proc/net/atm/arp. This patch adds a new function, neigh_table_init_no_netlink() which does everything the neigh_table_init() does, except add the table to the netlink all-arp-tables chain. In addition neigh_table_init() has a check that all tables on the chain have a distinct address family. The init call in clip.c is changed to call neigh_table_init_no_netlink(). Since ATM ARP tables are rather more complicated than can currently be handled by the available rtattrs in the netlink protocol, no functionality is lost by this patch, and non-ATM ARP manipulation via netlink is rescued. A more complete solution would involve a rtattr for ATM ARP entries and some way for the netlink code to give neigh_add and friends more information than just address family with which to find the correct ARP table. [ I've changed the assertion checking in neigh_table_init() to not use BUG_ON() while holding neigh_tbl_lock. Instead we remember that we found an existing tbl with the same family, and after dropping the lock we'll give a diagnostic kernel log message and a stack dump. -DaveM ] Signed-off-by: Simon Kelley <simon@thekelleys.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-12 14:56:08 -07:00
extern void neigh_table_init_no_netlink(struct neigh_table *tbl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern int neigh_table_clear(struct neigh_table *tbl);
extern struct neighbour * neigh_lookup(struct neigh_table *tbl,
const void *pkey,
struct net_device *dev);
extern struct neighbour * neigh_lookup_nodev(struct neigh_table *tbl,
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
struct net *net,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
const void *pkey);
extern struct neighbour * neigh_create(struct neigh_table *tbl,
const void *pkey,
struct net_device *dev);
extern void neigh_destroy(struct neighbour *neigh);
extern int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb);
extern int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
u32 flags);
extern void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev);
extern int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev);
extern int neigh_resolve_output(struct sk_buff *skb);
extern int neigh_connected_output(struct sk_buff *skb);
extern int neigh_compat_output(struct sk_buff *skb);
extern struct neighbour *neigh_event_ns(struct neigh_table *tbl,
u8 *lladdr, void *saddr,
struct net_device *dev);
extern struct neigh_parms *neigh_parms_alloc(struct net_device *dev, struct neigh_table *tbl);
extern void neigh_parms_release(struct neigh_table *tbl, struct neigh_parms *parms);
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
static inline
struct net *neigh_parms_net(const struct neigh_parms *parms)
{
net: Cleanup of neighbour code Using read_pnet() and write_pnet() in neighbour code ease the reading of code. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 01:54:54 -07:00
return read_pnet(&parms->net);
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern unsigned long neigh_rand_reach_time(unsigned long base);
extern void pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
struct sk_buff *skb);
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
extern struct pneigh_entry *pneigh_lookup(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev, int creat);
[NEIGH]: Fix race between pneigh deletion and ipv6's ndisc_recv_ns (v3). Proxy neighbors do not have any reference counting, so any caller of pneigh_lookup (unless it's a netlink triggered add/del routine) should _not_ perform any actions on the found proxy entry. There's one exception from this rule - the ipv6's ndisc_recv_ns() uses found entry to check the flags for NTF_ROUTER. This creates a race between the ndisc and pneigh_delete - after the pneigh is returned to the caller, the nd_tbl.lock is dropped and the deleting procedure may proceed. One of the fixes would be to add a reference counting, but this problem exists for ndisc only. Besides such a patch would be too big for -rc4. So I propose to introduce a __pneigh_lookup() which is supposed to be called with the lock held and use it in ndisc code to check the flags on alive pneigh entry. Changes from v2: As David noticed, Exported the __pneigh_lookup() to ipv6 module. The checkpatch generates a warning on it, since the EXPORT_SYMBOL does not follow the symbol itself, but in this file all the exports come at the end, so I decided no to break this harmony. Changes from v1: Fixed comments from YOSHIFUJI - indentation of prototype in header and the pndisc_check_router() name - and a compilation fix, pointed by Daniel - the is_routed was (falsely) considered as uninitialized by gcc. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24 14:48:59 -07:00
extern struct pneigh_entry *__pneigh_lookup(struct neigh_table *tbl,
struct net *net,
const void *key,
struct net_device *dev);
[NETNS]: Modify the neighbour table code so it handles multiple network namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-24 01:13:18 -07:00
extern int pneigh_delete(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
static inline
struct net *pneigh_net(const struct pneigh_entry *pneigh)
{
net: Cleanup of neighbour code Using read_pnet() and write_pnet() in neighbour code ease the reading of code. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 01:54:54 -07:00
return read_pnet(&pneigh->net);
[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS. Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 11:49:59 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void neigh_app_ns(struct neighbour *n);
extern void neigh_for_each(struct neigh_table *tbl, void (*cb)(struct neighbour *, void *), void *cookie);
extern void __neigh_for_each_release(struct neigh_table *tbl, int (*cb)(struct neighbour *));
extern void pneigh_for_each(struct neigh_table *tbl, void (*cb)(struct pneigh_entry *));
struct neigh_seq_state {
[NEIGH]: Make /proc/net/arp opening consistent with seq_net_open semantics seq_open_net requires that first field of the seq->private data to be struct seq_net_private. In reality this is a single pointer to a struct net for now. The patch makes code consistent. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 04:53:12 -07:00
struct seq_net_private p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct neigh_table *tbl;
void *(*neigh_sub_iter)(struct neigh_seq_state *state,
struct neighbour *n, loff_t *pos);
unsigned int bucket;
unsigned int flags;
#define NEIGH_SEQ_NEIGH_ONLY 0x00000001
#define NEIGH_SEQ_IS_PNEIGH 0x00000002
#define NEIGH_SEQ_SKIP_NOARP 0x00000004
};
extern void *neigh_seq_start(struct seq_file *, loff_t *, struct neigh_table *, unsigned int);
extern void *neigh_seq_next(struct seq_file *, void *, loff_t *);
extern void neigh_seq_stop(struct seq_file *, void *);
extern int neigh_sysctl_register(struct net_device *dev,
struct neigh_parms *p,
char *p_name,
sysctl net: Remove unused binary sysctl code Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-05 14:32:03 -07:00
proc_handler *proc_handler);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
extern void neigh_sysctl_unregister(struct neigh_parms *p);
static inline void __neigh_parms_put(struct neigh_parms *parms)
{
atomic_dec(&parms->refcnt);
}
static inline struct neigh_parms *neigh_parms_clone(struct neigh_parms *parms)
{
atomic_inc(&parms->refcnt);
return parms;
}
/*
* Neighbour references
*/
static inline void neigh_release(struct neighbour *neigh)
{
if (atomic_dec_and_test(&neigh->refcnt))
neigh_destroy(neigh);
}
static inline struct neighbour * neigh_clone(struct neighbour *neigh)
{
if (neigh)
atomic_inc(&neigh->refcnt);
return neigh;
}
#define neigh_hold(n) atomic_inc(&(n)->refcnt)
static inline void neigh_confirm(struct neighbour *neigh)
{
if (neigh)
neigh->confirmed = jiffies;
}
static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
{
neigh->used = jiffies;
if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
return __neigh_event_send(neigh, skb);
return 0;
}
netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT - fix IP DNAT on vlan- or pppoe-encapsulated traffic: The functions neigh_hh_output() or dst->neighbour->output() overwrite the complete Ethernet header, although we only need the destination MAC address. For encapsulated packets, they ended up overwriting the encapsulating header. The new code copies the Ethernet source MAC address and protocol number before calling dst->neighbour->output(). The Ethernet source MAC and protocol number are copied back in place in br_nf_pre_routing_finish_bridge_slow(). This also makes the IP DNAT more transparent because in the old scheme the source MAC of the bridge was copied into the source address in the Ethernet header. We also let skb->protocol equal ETH_P_IP resp. ETH_P_IPV6 during the execution of the PF_INET resp. PF_INET6 hooks. - Speed up IP DNAT by calling neigh_hh_bridge() instead of neigh_hh_output(): if dst->hh is available, we already know the MAC address so we can just copy it. Signed-off-by: Bart De Schuymer <bdschuym@pandora.be> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-15 03:26:39 -07:00
#ifdef CONFIG_BRIDGE_NETFILTER
static inline int neigh_hh_bridge(struct hh_cache *hh, struct sk_buff *skb)
{
unsigned seq, hh_alen;
do {
seq = read_seqbegin(&hh->hh_lock);
hh_alen = HH_DATA_ALIGN(ETH_HLEN);
memcpy(skb->data - hh_alen, hh->hh_data, ETH_ALEN + hh_alen - ETH_HLEN);
} while (read_seqretry(&hh->hh_lock, seq));
return 0;
}
#endif
[NET]: Convert hh_lock to seqlock. The hard header cache is in the main output path, so using seqlock instead of reader/writer lock should reduce overhead. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-07 16:08:17 -07:00
static inline int neigh_hh_output(struct hh_cache *hh, struct sk_buff *skb)
{
unsigned seq;
int hh_len;
do {
int hh_alen;
seq = read_seqbegin(&hh->hh_lock);
hh_len = hh->hh_len;
hh_alen = HH_DATA_ALIGN(hh_len);
memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
} while (read_seqretry(&hh->hh_lock, seq));
skb_push(skb, hh_len);
return hh->hh_output(skb);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static inline struct neighbour *
__neigh_lookup(struct neigh_table *tbl, const void *pkey, struct net_device *dev, int creat)
{
struct neighbour *n = neigh_lookup(tbl, pkey, dev);
if (n || !creat)
return n;
n = neigh_create(tbl, pkey, dev);
return IS_ERR(n) ? NULL : n;
}
static inline struct neighbour *
__neigh_lookup_errno(struct neigh_table *tbl, const void *pkey,
struct net_device *dev)
{
struct neighbour *n = neigh_lookup(tbl, pkey, dev);
if (n)
return n;
return neigh_create(tbl, pkey, dev);
}
[NET]: Store skb->timestamp as offset to a base timestamp Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-14 17:24:31 -07:00
struct neighbour_cb {
unsigned long sched_next;
unsigned int flags;
};
#define LOCALLY_ENQUEUED 0x1
#define NEIGH_CB(skb) ((struct neighbour_cb *)(skb)->cb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#endif
Copy Permalink