kevin/linux
1
Fork 0
Code
26f953fd88
linux/drivers/usb/core/hub.c

3049 lines
82 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* USB hub driver.
*
* (C) Copyright 1999 Linus Torvalds
* (C) Copyright 1999 Johannes Erdfelt
* (C) Copyright 1999 Gregory P. Smith
* (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au)
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/completion.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
#include <linux/kthread.h>
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 07:55:29 -07:00
#include <linux/mutex.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#include <asm/semaphore.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include "usb.h"
#include "hcd.h"
#include "hub.h"
/* Protect struct usb_device->state and ->children members
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
* Note: Both are also protected by ->dev.sem, except that ->state can
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
static DEFINE_SPINLOCK(device_state_lock);
/* khubd's worklist and its lock */
static DEFINE_SPINLOCK(hub_event_lock);
static LIST_HEAD(hub_event_list); /* List of hubs needing servicing */
/* Wakes up khubd */
static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
static struct task_struct *khubd_task;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
/*
* As of 2.6.10 we introduce a new USB device initialization scheme which
* closely resembles the way Windows works. Hopefully it will be compatible
* with a wider range of devices than the old scheme. However some previously
* working devices may start giving rise to "device not accepting address"
* errors; if that happens the user can try the old scheme by adjusting the
* following module parameters.
*
* For maximum flexibility there are two boolean parameters to control the
* hub driver's behavior. On the first initialization attempt, if the
* "old_scheme_first" parameter is set then the old scheme will be used,
* otherwise the new scheme is used. If that fails and "use_both_schemes"
* is set, then the driver will make another attempt, using the other scheme.
*/
static int old_scheme_first = 0;
module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(old_scheme_first,
"start with the old device initialization scheme");
static int use_both_schemes = 1;
module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(use_both_schemes,
"try the other device initialization scheme if the "
"first one fails");
#ifdef DEBUG
static inline char *portspeed (int portstatus)
{
if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
return "480 Mb/s";
else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
return "1.5 Mb/s";
else
return "12 Mb/s";
}
#endif
/* Note that hdev or one of its children must be locked! */
static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
{
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
/* USB 2.0 spec Section 11.24.4.5 */
static int get_hub_descriptor(struct usb_device *hdev, void *data, int size)
{
int i, ret;
for (i = 0; i < 3; i++) {
ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
USB_DT_HUB << 8, 0, data, size,
USB_CTRL_GET_TIMEOUT);
if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
return ret;
}
return -EINVAL;
}
/*
* USB 2.0 spec Section 11.24.2.1
*/
static int clear_hub_feature(struct usb_device *hdev, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
}
/*
* USB 2.0 spec Section 11.24.2.2
*/
static int clear_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
NULL, 0, 1000);
}
/*
* USB 2.0 spec Section 11.24.2.13
*/
static int set_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
NULL, 0, 1000);
}
/*
* USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
* for info about using port indicators
*/
static void set_port_led(
struct usb_hub *hub,
int port1,
int selector
)
{
int status = set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
if (status < 0)
dev_dbg (hub->intfdev,
"port %d indicator %s status %d\n",
port1,
({ char *s; switch (selector) {
case HUB_LED_AMBER: s = "amber"; break;
case HUB_LED_GREEN: s = "green"; break;
case HUB_LED_OFF: s = "off"; break;
case HUB_LED_AUTO: s = "auto"; break;
default: s = "??"; break;
}; s; }),
status);
}
#define LED_CYCLE_PERIOD ((2*HZ)/3)
static void led_work (void *__hub)
{
struct usb_hub *hub = __hub;
struct usb_device *hdev = hub->hdev;
unsigned i;
unsigned changed = 0;
int cursor = -1;
if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
return;
for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
unsigned selector, mode;
/* 30%-50% duty cycle */
switch (hub->indicator[i]) {
/* cycle marker */
case INDICATOR_CYCLE:
cursor = i;
selector = HUB_LED_AUTO;
mode = INDICATOR_AUTO;
break;
/* blinking green = sw attention */
case INDICATOR_GREEN_BLINK:
selector = HUB_LED_GREEN;
mode = INDICATOR_GREEN_BLINK_OFF;
break;
case INDICATOR_GREEN_BLINK_OFF:
selector = HUB_LED_OFF;
mode = INDICATOR_GREEN_BLINK;
break;
/* blinking amber = hw attention */
case INDICATOR_AMBER_BLINK:
selector = HUB_LED_AMBER;
mode = INDICATOR_AMBER_BLINK_OFF;
break;
case INDICATOR_AMBER_BLINK_OFF:
selector = HUB_LED_OFF;
mode = INDICATOR_AMBER_BLINK;
break;
/* blink green/amber = reserved */
case INDICATOR_ALT_BLINK:
selector = HUB_LED_GREEN;
mode = INDICATOR_ALT_BLINK_OFF;
break;
case INDICATOR_ALT_BLINK_OFF:
selector = HUB_LED_AMBER;
mode = INDICATOR_ALT_BLINK;
break;
default:
continue;
}
if (selector != HUB_LED_AUTO)
changed = 1;
set_port_led(hub, i + 1, selector);
hub->indicator[i] = mode;
}
if (!changed && blinkenlights) {
cursor++;
cursor %= hub->descriptor->bNbrPorts;
set_port_led(hub, cursor + 1, HUB_LED_GREEN);
hub->indicator[cursor] = INDICATOR_CYCLE;
changed++;
}
if (changed)
schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
}
/* use a short timeout for hub/port status fetches */
#define USB_STS_TIMEOUT 1000
#define USB_STS_RETRIES 5
/*
* USB 2.0 spec Section 11.24.2.6
*/
static int get_hub_status(struct usb_device *hdev,
struct usb_hub_status *data)
{
int i, status = -ETIMEDOUT;
for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
data, sizeof(*data), USB_STS_TIMEOUT);
}
return status;
}
/*
* USB 2.0 spec Section 11.24.2.7
*/
static int get_port_status(struct usb_device *hdev, int port1,
struct usb_port_status *data)
{
int i, status = -ETIMEDOUT;
for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
data, sizeof(*data), USB_STS_TIMEOUT);
}
return status;
}
static void kick_khubd(struct usb_hub *hub)
{
unsigned long flags;
spin_lock_irqsave(&hub_event_lock, flags);
if (list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
wake_up(&khubd_wait);
}
spin_unlock_irqrestore(&hub_event_lock, flags);
}
void usb_kick_khubd(struct usb_device *hdev)
{
kick_khubd(hdev_to_hub(hdev));
}
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb, struct pt_regs *regs)
{
USB: Remove unneeded void * casts in core files The patch removes unneeded casts for the following (void *) pointers: - struct file: private - struct urb: context - struct usb_bus: hcpriv - return value of kmalloc() The patch also contains some whitespace cleanup in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 12:38:41 -07:00
struct usb_hub *hub = urb->context;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int status;
int i;
unsigned long bits;
switch (urb->status) {
case -ENOENT: /* synchronous unlink */
case -ECONNRESET: /* async unlink */
case -ESHUTDOWN: /* hardware going away */
return;
default: /* presumably an error */
/* Cause a hub reset after 10 consecutive errors */
dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status);
if ((++hub->nerrors < 10) || hub->error)
goto resubmit;
hub->error = urb->status;
/* FALL THROUGH */
USB: Remove unneeded void * casts in core files The patch removes unneeded casts for the following (void *) pointers: - struct file: private - struct urb: context - struct usb_bus: hcpriv - return value of kmalloc() The patch also contains some whitespace cleanup in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 12:38:41 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* let khubd handle things */
case 0: /* we got data: port status changed */
bits = 0;
for (i = 0; i < urb->actual_length; ++i)
bits |= ((unsigned long) ((*hub->buffer)[i]))
<< (i*8);
hub->event_bits[0] = bits;
break;
}
hub->nerrors = 0;
/* Something happened, let khubd figure it out */
kick_khubd(hub);
resubmit:
if (hub->quiescing)
return;
if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
&& status != -ENODEV && status != -EPERM)
dev_err (hub->intfdev, "resubmit --> %d\n", status);
}
/* USB 2.0 spec Section 11.24.2.3 */
static inline int
hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
{
return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
tt, NULL, 0, 1000);
}
/*
* enumeration blocks khubd for a long time. we use keventd instead, since
* long blocking there is the exception, not the rule. accordingly, HCDs
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
static void hub_tt_kevent (void *arg)
{
struct usb_hub *hub = arg;
unsigned long flags;
spin_lock_irqsave (&hub->tt.lock, flags);
while (!list_empty (&hub->tt.clear_list)) {
struct list_head *temp;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
int status;
temp = hub->tt.clear_list.next;
clear = list_entry (temp, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
spin_lock_irqsave (&hub->tt.lock, flags);
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
2005-04-18 17:39:34 -07:00
kfree(clear);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
* usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
* @udev: the device whose split transaction failed
* @pipe: identifies the endpoint of the failed transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
* a transaction translator. This is normally detected (and reported) from
* interrupt context.
*
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
{
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
/* we've got to cope with an arbitrary number of pending TT clears,
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return;
}
/* info that CLEAR_TT_BUFFER needs */
clear->tt = tt->multi ? udev->ttport : 1;
clear->devinfo = usb_pipeendpoint (pipe);
clear->devinfo |= udev->devnum << 4;
clear->devinfo |= usb_pipecontrol (pipe)
? (USB_ENDPOINT_XFER_CONTROL << 11)
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
schedule_work (&tt->kevent);
spin_unlock_irqrestore (&tt->lock, flags);
}
static void hub_power_on(struct usb_hub *hub)
{
int port1;
[PATCH] USB: relax usbcore reset timings This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 10:41:44 -07:00
unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
[PATCH] USB: usbcore: always turn on hub port power Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 12:54:22 -07:00
u16 wHubCharacteristics =
le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* Enable power on each port. Some hubs have reserved values
* of LPSM (> 2) in their descriptors, even though they are
* USB 2.0 hubs. Some hubs do not implement port-power switching
* but only emulate it. In all cases, the ports won't work
* unless we send these messages to the hub.
*/
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(hub->intfdev, "enabling power on all ports\n");
[PATCH] USB: usbcore: always turn on hub port power Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 12:54:22 -07:00
else
dev_dbg(hub->intfdev, "trying to enable port power on "
"non-switchable hub\n");
for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: relax usbcore reset timings This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 10:41:44 -07:00
/* Wait at least 100 msec for power to become stable */
msleep(max(pgood_delay, (unsigned) 100));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
usbcore: remove usb_suspend_root_hub This patch (as740) removes the existing support for autosuspend of root hubs. That support fit in rather awkwardly with the rest of usbcore and it was used only by ohci-hcd. It won't be needed any more since the hub driver will take care of autosuspending all hubs, root or external. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:11 -07:00
static void hub_quiesce(struct usb_hub *hub)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-22 22:32:24 -07:00
/* (nonblocking) khubd and related activity won't re-trigger */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hub->quiescing = 1;
[PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13 19:57:04 -07:00
hub->activating = 0;
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-22 22:32:24 -07:00
hub->resume_root_hub = 0;
/* (blocking) stop khubd and related activity */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
if (hub->has_indicators || hub->tt.hub)
flush_scheduled_work();
}
static void hub_activate(struct usb_hub *hub)
{
int status;
hub->quiescing = 0;
hub->activating = 1;
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-22 22:32:24 -07:00
hub->resume_root_hub = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
if (hub->has_indicators && blinkenlights)
schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
/* scan all ports ASAP */
kick_khubd(hub);
}
static int hub_hub_status(struct usb_hub *hub,
u16 *status, u16 *change)
{
int ret;
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
*change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
return ret;
}
[PATCH] USB: Code motion in the hub driver This patch (as553) merely moves some code and deletes an unneeded test in the hub driver. This is in preparation for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-10 14:04:13 -07:00
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
struct usb_device *hdev = hub->hdev;
int ret;
if (hdev->children[port1-1] && set_state) {
usb_set_device_state(hdev->children[port1-1],
USB_STATE_NOTATTACHED);
}
ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
port1, ret);
return ret;
}
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
/* caller has locked the hub device */
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
static void hub_pre_reset(struct usb_interface *intf)
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
{
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
struct usb_hub *hub = usb_get_intfdata(intf);
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
struct usb_device *hdev = hub->hdev;
int port1;
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
if (hdev->children[port1 - 1]) {
usb_disconnect(&hdev->children[port1 - 1]);
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
if (hub->error == 0)
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
hub_port_disable(hub, port1, 0);
}
}
hub_quiesce(hub);
}
/* caller has locked the hub device */
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
static void hub_post_reset(struct usb_interface *intf)
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
{
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
struct usb_hub *hub = usb_get_intfdata(intf);
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
hub_activate(hub);
hub_power_on(hub);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static int hub_configure(struct usb_hub *hub,
struct usb_endpoint_descriptor *endpoint)
{
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
u16 wHubCharacteristics;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
unsigned int pipe;
int maxp, ret;
char *message;
hub->buffer = usb_buffer_alloc(hdev, sizeof(*hub->buffer), GFP_KERNEL,
&hub->buffer_dma);
if (!hub->buffer) {
message = "can't allocate hub irq buffer";
ret = -ENOMEM;
goto fail;
}
hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
if (!hub->status) {
message = "can't kmalloc hub status buffer";
ret = -ENOMEM;
goto fail;
}
hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
message = "can't kmalloc hub descriptor";
ret = -ENOMEM;
goto fail;
}
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
*/
ret = get_hub_descriptor(hdev, hub->descriptor,
sizeof(*hub->descriptor));
if (ret < 0) {
message = "can't read hub descriptor";
goto fail;
} else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) {
message = "hub has too many ports!";
ret = -ENODEV;
goto fail;
}
hdev->maxchild = hub->descriptor->bNbrPorts;
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int i;
char portstr [USB_MAXCHILDREN + 1];
for (i = 0; i < hdev->maxchild; i++)
portstr[i] = hub->descriptor->DeviceRemovable
[((i + 1) / 8)] & (1 << ((i + 1) % 8))
? 'F' : 'R';
portstr[hdev->maxchild] = 0;
dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr);
} else
dev_dbg(hub_dev, "standalone hub\n");
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
switch (wHubCharacteristics & HUB_CHAR_LPSM) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case 0x00:
dev_dbg(hub_dev, "ganged power switching\n");
break;
case 0x01:
dev_dbg(hub_dev, "individual port power switching\n");
break;
case 0x02:
case 0x03:
dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
break;
}
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
switch (wHubCharacteristics & HUB_CHAR_OCPM) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case 0x00:
dev_dbg(hub_dev, "global over-current protection\n");
break;
case 0x08:
dev_dbg(hub_dev, "individual port over-current protection\n");
break;
case 0x10:
case 0x18:
dev_dbg(hub_dev, "no over-current protection\n");
break;
}
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
INIT_WORK (&hub->tt.kevent, hub_tt_kevent, hub);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
case 1:
dev_dbg(hub_dev, "Single TT\n");
hub->tt.hub = hdev;
break;
case 2:
ret = usb_set_interface(hdev, 0, 1);
if (ret == 0) {
dev_dbg(hub_dev, "TT per port\n");
hub->tt.multi = 1;
} else
dev_err(hub_dev, "Using single TT (err %d)\n",
ret);
hub->tt.hub = hdev;
break;
default:
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
hdev->descriptor.bDeviceProtocol);
break;
}
[PATCH] ehci: add think_time This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-13 18:41:04 -07:00
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
switch (wHubCharacteristics & HUB_CHAR_TTTT) {
[PATCH] ehci: add think_time This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-13 18:41:04 -07:00
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
8, hub->tt.think_time);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
[PATCH] ehci: add think_time This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-13 18:41:04 -07:00
case HUB_TTTT_16_BITS:
hub->tt.think_time = 666 * 2;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
16, hub->tt.think_time);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
[PATCH] ehci: add think_time This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-13 18:41:04 -07:00
case HUB_TTTT_24_BITS:
hub->tt.think_time = 666 * 3;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
24, hub->tt.think_time);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
[PATCH] ehci: add think_time This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-13 18:41:04 -07:00
case HUB_TTTT_32_BITS:
hub->tt.think_time = 666 * 4;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
32, hub->tt.think_time);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
break;
}
/* probe() zeroes hub->indicator[] */
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
if (wHubCharacteristics & HUB_CHAR_PORTIND) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hub->has_indicators = 1;
dev_dbg(hub_dev, "Port indicators are supported\n");
}
dev_dbg(hub_dev, "power on to power good time: %dms\n",
hub->descriptor->bPwrOn2PwrGood * 2);
/* power budgeting mostly matters with bus-powered hubs,
* and battery-powered root hubs (may provide just 8 mA).
*/
ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (ret < 2) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
message = "can't get hub status";
goto fail;
}
[PATCH] usbcore: Remove hub_set_power_budget This patch removes the hub_set_power_budget routine, which was used by a couple of HCDs to indicate that the root hub was running on battery power. In its place is a new field added to struct usb_hcd, which HCDs can set before the root hub is registered. Special-case code in the hub driver knows to look at this field when configuring a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 08:18:32 -07:00
le16_to_cpus(&hubstatus);
if (hdev == hdev->bus->root_hub) {
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (hdev->bus_mA == 0 || hdev->bus_mA >= 500)
hub->mA_per_port = 500;
else {
hub->mA_per_port = hdev->bus_mA;
hub->limited_power = 1;
}
[PATCH] usbcore: Remove hub_set_power_budget This patch removes the hub_set_power_budget routine, which was used by a couple of HCDs to indicate that the root hub was running on battery power. In its place is a new field added to struct usb_hcd, which HCDs can set before the root hub is registered. Special-case code in the hub driver knows to look at this field when configuring a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 08:18:32 -07:00
} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
hub->descriptor->bHubContrCurrent);
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
hub->limited_power = 1;
if (hdev->maxchild > 0) {
int remaining = hdev->bus_mA -
hub->descriptor->bHubContrCurrent;
if (remaining < hdev->maxchild * 100)
dev_warn(hub_dev,
"insufficient power available "
"to use all downstream ports\n");
hub->mA_per_port = 100; /* 7.2.1.1 */
}
} else { /* Self-powered external hub */
/* FIXME: What about battery-powered external hubs that
* provide less current per port? */
hub->mA_per_port = 500;
[PATCH] usbcore: Remove hub_set_power_budget This patch removes the hub_set_power_budget routine, which was used by a couple of HCDs to indicate that the root hub was running on battery power. In its place is a new field added to struct usb_hcd, which HCDs can set before the root hub is registered. Special-case code in the hub driver knows to look at this field when configuring a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 08:18:32 -07:00
}
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (hub->mA_per_port < 500)
dev_dbg(hub_dev, "%umA bus power budget for each child\n",
hub->mA_per_port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ret = hub_hub_status(hub, &hubstatus, &hubchange);
if (ret < 0) {
message = "can't get hub status";
goto fail;
}
/* local power status reports aren't always correct */
if (hdev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER)
dev_dbg(hub_dev, "local power source is %s\n",
(hubstatus & HUB_STATUS_LOCAL_POWER)
? "lost (inactive)" : "good");
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
/* set up the interrupt endpoint */
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
if (maxp > sizeof(*hub->buffer))
maxp = sizeof(*hub->buffer);
hub->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!hub->urb) {
message = "couldn't allocate interrupt urb";
ret = -ENOMEM;
goto fail;
}
usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq,
hub, endpoint->bInterval);
hub->urb->transfer_dma = hub->buffer_dma;
hub->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* maybe cycle the hub leds */
if (hub->has_indicators && blinkenlights)
hub->indicator [0] = INDICATOR_CYCLE;
hub_power_on(hub);
hub_activate(hub);
return 0;
fail:
dev_err (hub_dev, "config failed, %s (err %d)\n",
message, ret);
/* hub_disconnect() frees urb and descriptor */
return ret;
}
static unsigned highspeed_hubs;
static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev;
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
/* Disconnect all children and quiesce the hub */
hub->error = 0;
hub_pre_reset(intf);
[PATCH] USB: Code motion in the hub driver This patch (as553) merely moves some code and deletes an unneeded test in the hub driver. This is in preparation for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-10 14:04:13 -07:00
usb_set_intfdata (intf, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hdev = hub->hdev;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
usb_free_urb(hub->urb);
hub->urb = NULL;
spin_lock_irq(&hub_event_lock);
list_del_init(&hub->event_list);
spin_unlock_irq(&hub_event_lock);
[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
2005-04-18 17:39:34 -07:00
kfree(hub->descriptor);
hub->descriptor = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
2005-04-18 17:39:34 -07:00
kfree(hub->status);
hub->status = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (hub->buffer) {
usb_buffer_free(hdev, sizeof(*hub->buffer), hub->buffer,
hub->buffer_dma);
hub->buffer = NULL;
}
[PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 10:06:34 -07:00
kfree(hub);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_host_interface *desc;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *hdev;
struct usb_hub *hub;
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
[PATCH] USB: otg hub support is optional USB OTG devices are not required to support external hubs. This adds a configuration option to disable that support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-02 11:18:09 -07:00
#ifdef CONFIG_USB_OTG_BLACKLIST_HUB
if (hdev->parent) {
dev_warn(&intf->dev, "ignoring external hub\n");
return -ENODEV;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((desc->desc.bInterfaceSubClass != 0) &&
(desc->desc.bInterfaceSubClass != 1)) {
descriptor_error:
dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
return -EIO;
}
/* Multiple endpoints? What kind of mutant ninja-hub is this? */
if (desc->desc.bNumEndpoints != 1)
goto descriptor_error;
endpoint = &desc->endpoint[0].desc;
USB: hub: Use usb_endpoint_* functions. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:58:53 -07:00
/* If it's not an interrupt in endpoint, we'd better punt! */
if (!usb_endpoint_is_int_in(endpoint))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto descriptor_error;
/* We found a hub */
dev_info (&intf->dev, "USB hub found\n");
[PATCH] usbcore: Use kzalloc instead of kmalloc/memset This patch (as590) fixes up all the remaining places where usbcore can use kzalloc rather than kmalloc/memset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-24 12:38:24 -07:00
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!hub) {
dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
INIT_LIST_HEAD(&hub->event_list);
hub->intfdev = &intf->dev;
hub->hdev = hdev;
INIT_WORK(&hub->leds, led_work, hub);
usb_set_intfdata (intf, hub);
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs++;
if (hub_configure(hub, endpoint) >= 0)
return 0;
hub_disconnect (intf);
return -ENODEV;
}
static int
hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
{
struct usb_device *hdev = interface_to_usbdev (intf);
/* assert ifno == 0 (part of hub spec) */
switch (code) {
case USBDEVFS_HUB_PORTINFO: {
struct usbdevfs_hub_portinfo *info = user_data;
int i;
spin_lock_irq(&device_state_lock);
if (hdev->devnum <= 0)
info->nports = 0;
else {
info->nports = hdev->maxchild;
for (i = 0; i < info->nports; i++) {
if (hdev->children[i] == NULL)
info->port[i] = 0;
else
info->port[i] =
hdev->children[i]->devnum;
}
}
spin_unlock_irq(&device_state_lock);
return info->nports + 1;
}
default:
return -ENOSYS;
}
}
/* grab device/port lock, returning index of that port (zero based).
* protects the upstream link used by this device from concurrent
* tree operations like suspend, resume, reset, and disconnect, which
* apply to everything downstream of a given port.
*/
static int locktree(struct usb_device *udev)
{
int t;
struct usb_device *hdev;
if (!udev)
return -ENODEV;
/* root hub is always the first lock in the series */
hdev = udev->parent;
if (!hdev) {
usb_lock_device(udev);
return 0;
}
/* on the path from root to us, lock everything from
* top down, dropping parent locks when not needed
*/
t = locktree(hdev);
if (t < 0)
return t;
[PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:09:52 -07:00
/* everything is fail-fast once disconnect
* processing starts
*/
if (udev->state == USB_STATE_NOTATTACHED) {
usb_unlock_device(hdev);
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:09:52 -07:00
/* when everyone grabs locks top->bottom,
* non-overlapping work may be concurrent
*/
usb_lock_device(udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usb_unlock_device(hdev);
[PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:09:52 -07:00
return udev->portnum;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
{
int i;
for (i = 0; i < udev->maxchild; ++i) {
if (udev->children[i])
recursively_mark_NOTATTACHED(udev->children[i]);
}
udev->state = USB_STATE_NOTATTACHED;
}
/**
* usb_set_device_state - change a device's current state (usbcore, hcds)
* @udev: pointer to device whose state should be changed
* @new_state: new state value to be stored
*
* udev->state is _not_ fully protected by the device lock. Although
* most transitions are made only while holding the lock, the state can
* can change to USB_STATE_NOTATTACHED at almost any time. This
* is so that devices can be marked as disconnected as soon as possible,
* without having to wait for any semaphores to be released. As a result,
* all changes to any device's state must be protected by the
* device_state_lock spinlock.
*
* Once a device has been added to the device tree, all changes to its state
* should be made using this routine. The state should _not_ be set directly.
*
* If udev->state is already USB_STATE_NOTATTACHED then no change is made.
* Otherwise udev->state is set to new_state, and if new_state is
* USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
* to USB_STATE_NOTATTACHED.
*/
void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state)
{
unsigned long flags;
spin_lock_irqsave(&device_state_lock, flags);
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
[PATCH] usb device wakeup flags This patch teaches "usb_device" about the new driver model wakeup support: - It updates device wakeup capabilities when entering a configuration with the WAKEUP attribute; - During suspend processing it consults the policy bit to see whether it should enable wakeup for that device. (This resolves a FIXME to not assume the answer is always "yes"; some devices lie about supporting remote wakeup.) Support for root hubs and the HCDs is separate (and more complex). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12 19:39:39 -07:00
else if (new_state != USB_STATE_NOTATTACHED) {
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 09:40:27 -07:00
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
if (udev->state == USB_STATE_SUSPENDED
|| new_state == USB_STATE_SUSPENDED)
; /* No change to wakeup settings */
else if (new_state == USB_STATE_CONFIGURED)
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 09:40:27 -07:00
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
else
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 09:40:27 -07:00
device_init_wakeup(&udev->dev, 0);
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
udev->state = new_state;
[PATCH] usb device wakeup flags This patch teaches "usb_device" about the new driver model wakeup support: - It updates device wakeup capabilities when entering a configuration with the WAKEUP attribute; - During suspend processing it consults the policy bit to see whether it should enable wakeup for that device. (This resolves a FIXME to not assume the answer is always "yes"; some devices lie about supporting remote wakeup.) Support for root hubs and the HCDs is separate (and more complex). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12 19:39:39 -07:00
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#ifdef CONFIG_PM
[PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-14 09:45:38 -07:00
/**
* usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
* @rhdev: struct usb_device for the root hub
*
* The USB host controller driver calls this function when its root hub
* is resumed and Vbus power has been interrupted or the controller
* has been reset. The routine marks all the children of the root hub
* as NOTATTACHED and marks logical connect-change events on their ports.
*/
void usb_root_hub_lost_power(struct usb_device *rhdev)
{
struct usb_hub *hub;
int port1;
unsigned long flags;
dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
USB: force root hub resume after power loss This patch(as785) forces the PM core to resume a root hub after a power loss during system sleep. If the root hub had been suspended before the system sleep then normally the PM core would not resume it afterward. Without this resume, various sorts of wakeup events (like port change events) can get lost. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-19 07:07:58 -07:00
/* Make sure no potential wakeup events get lost,
* by forcing the root hub to be resumed.
*/
rhdev->dev.power.prev_state.event = PM_EVENT_ON;
[PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-14 09:45:38 -07:00
spin_lock_irqsave(&device_state_lock, flags);
hub = hdev_to_hub(rhdev);
for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
if (rhdev->children[port1 - 1]) {
recursively_mark_NOTATTACHED(
rhdev->children[port1 - 1]);
set_bit(port1, hub->change_bits);
}
}
spin_unlock_irqrestore(&device_state_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#endif /* CONFIG_PM */
[PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-14 09:45:38 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static void choose_address(struct usb_device *udev)
{
int devnum;
struct usb_bus *bus = udev->bus;
/* If khubd ever becomes multithreaded, this will need a lock */
/* Try to allocate the next devnum beginning at bus->devnum_next. */
devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
bus->devnum_next);
if (devnum >= 128)
devnum = find_next_zero_bit(bus->devmap.devicemap, 128, 1);
bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
if (devnum < 128) {
set_bit(devnum, bus->devmap.devicemap);
udev->devnum = devnum;
}
}
static void release_address(struct usb_device *udev)
{
if (udev->devnum > 0) {
clear_bit(udev->devnum, udev->bus->devmap.devicemap);
udev->devnum = -1;
}
}
/**
* usb_disconnect - disconnect a device (usbcore-internal)
* @pdev: pointer to device being disconnected
* Context: !in_interrupt ()
*
* Something got disconnected. Get rid of it and all of its children.
*
* If *pdev is a normal device then the parent hub must already be locked.
* If *pdev is a root hub then this routine will acquire the
* usb_bus_list_lock on behalf of the caller.
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
*
* This call is synchronous, and may not be used in an interrupt context.
*/
void usb_disconnect(struct usb_device **pdev)
{
struct usb_device *udev = *pdev;
int i;
if (!udev) {
pr_debug ("%s nodev\n", __FUNCTION__);
return;
}
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
* this quiesces everyting except pending urbs.
*/
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
usb_lock_device(udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Free up all the children before we remove this device */
for (i = 0; i < USB_MAXCHILDREN; i++) {
if (udev->children[i])
usb_disconnect(&udev->children[i]);
}
/* deallocate hcd/hardware state ... nuking all pending urbs and
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:09:35 -07:00
dev_dbg (&udev->dev, "unregistering device\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usb_disable_device(udev, 0);
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:09:35 -07:00
usb_unlock_device(udev);
/* Unregister the device. The device driver is responsible
* for removing the device files from usbfs and sysfs and for
* de-configuring the device.
*/
device_del(&udev->dev);
[PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 21:15:16 -07:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:09:35 -07:00
/* Free the device number and delete the parent's children[]
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* (or root_hub) pointer.
*/
release_address(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:09:35 -07:00
put_device(&udev->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
#ifdef DEBUG
static void show_string(struct usb_device *udev, char *id, char *string)
{
if (!string)
return;
dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
}
#else
static inline void show_string(struct usb_device *udev, char *id, char *string)
{}
#endif
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
#endif
/**
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
* This is called with devices which have been enumerated, but not yet
* configured. The device descriptor is available, but not descriptors
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
* for any device configuration. The caller must have locked either
* the parent hub (if udev is a normal device) or else the
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* usb_bus_list_lock (if udev is a root hub). The parent's pointer to
* udev has already been installed, but udev is not yet visible through
* sysfs or other filesystem code.
*
* Returns 0 for success (device is configured and listed, with its
* interfaces, in sysfs); else a negative errno value.
*
* This call is synchronous, and may not be used in an interrupt context.
*
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
* Only the hub driver or root-hub registrar should ever call this.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
int usb_new_device(struct usb_device *udev)
{
int err;
err = usb_get_configuration(udev);
if (err < 0) {
dev_err(&udev->dev, "can't read configurations, error %d\n",
err);
goto fail;
}
/* read the standard strings and cache them if present */
[PATCH] usbcore: Fix handling of sysfs strings and other attributes This patch (as592) makes a few small improvements to the way device strings are handled, and it fixes some bugs in a couple of other sysfs attribute routines. (Look at show_configuration_string() to see what I mean.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-24 13:24:14 -07:00
udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
udev->manufacturer = usb_cache_string(udev,
udev->descriptor.iManufacturer);
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Tell the world! */
dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
"SerialNumber=%d\n",
udev->descriptor.iManufacturer,
udev->descriptor.iProduct,
udev->descriptor.iSerialNumber);
show_string(udev, "Product", udev->product);
show_string(udev, "Manufacturer", udev->manufacturer);
show_string(udev, "SerialNumber", udev->serial);
#ifdef CONFIG_USB_OTG
/*
* OTG-aware devices on OTG-capable root hubs may be able to use SRP,
* to wake us after we've powered off VBUS; and HNP, switching roles
* "host" to "peripheral". The OTG descriptor helps figure this out.
*/
if (!udev->bus->is_b_host
&& udev->config
&& udev->parent == udev->bus->root_hub) {
struct usb_otg_descriptor *desc = 0;
struct usb_bus *bus = udev->bus;
/* descriptor may appear anywhere in config */
if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
le16_to_cpu(udev->config[0].desc.wTotalLength),
USB_DT_OTG, (void **) &desc) == 0) {
if (desc->bmAttributes & USB_OTG_HNP) {
[PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:09:52 -07:00
unsigned port1 = udev->portnum;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct usb_device *root = udev->parent;
dev_info(&udev->dev,
"Dual-Role OTG device on %sHNP port\n",
(port1 == bus->otg_port)
? "" : "non-");
/* enable HNP before suspend, it's simpler */
if (port1 == bus->otg_port)
bus->b_hnp_enable = 1;
err = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, 0,
bus->b_hnp_enable
? USB_DEVICE_B_HNP_ENABLE
: USB_DEVICE_A_ALT_HNP_SUPPORT,
0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (err < 0) {
/* OTG MESSAGE: report errors here,
* customize to match your product.
*/
dev_info(&udev->dev,
"can't set HNP mode; %d\n",
err);
bus->b_hnp_enable = 0;
}
}
}
}
if (!is_targeted(udev)) {
/* Maybe it can talk to us, though we can't talk to it.
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
static int __usb_port_suspend(struct usb_device *,
[PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-09-13 19:57:27 -07:00
int port1);
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
err = __usb_port_suspend(udev, udev->bus->otg_port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
err = -ENODEV;
goto fail;
}
#endif
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:09:35 -07:00
/* Register the device. The device driver is responsible
* for adding the device files to usbfs and sysfs and for
* configuring the device.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = device_add (&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
}
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
fail:
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
return err;
}
static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
int ret;
ret = get_port_status(hub->hdev, port1, &hub->status->port);
if (ret < 0)
dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
ret = 0;
}
return ret;
}
wusb: hub code recognizes wusb ports This patch enables the USB stack to recognize WUSB devices (from a WUSB HCD) and assigns them the proper speed setting (USB_SPEED_VARIABLE). 1. Introduce usb_hcd->wireless to mark a host controller instance as being wireless, and thus having wireless 'fake' ports. [discarded previous model of using a reserved bit in the port_stat struct to do this; thanks to Alan Stern for indicating the proper way to do it]. 2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root hub (WUSB doesn't have non-root hubs). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:29 -07:00
/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
static unsigned hub_is_wusb(struct usb_hub *hub)
{
struct usb_hcd *hcd;
if (hub->hdev->parent != NULL) /* not a root hub? */
return 0;
hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
return hcd->wireless;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first)
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 500
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int delay_time, ret;
u16 portstatus;
u16 portchange;
for (delay_time = 0;
delay_time < HUB_RESET_TIMEOUT;
delay_time += delay) {
/* wait to give the device a chance to reset */
msleep(delay);
/* read and decode port status */
ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
/* Device went away? */
if (!(portstatus & USB_PORT_STAT_CONNECTION))
return -ENOTCONN;
/* bomb out completely if something weird happened */
if ((portchange & USB_PORT_STAT_C_CONNECTION))
return -EINVAL;
/* if we`ve finished resetting, then break out of the loop */
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
wusb: hub code recognizes wusb ports This patch enables the USB stack to recognize WUSB devices (from a WUSB HCD) and assigns them the proper speed setting (USB_SPEED_VARIABLE). 1. Introduce usb_hcd->wireless to mark a host controller instance as being wireless, and thus having wireless 'fake' ports. [discarded previous model of using a reserved bit in the port_stat struct to do this; thanks to Alan Stern for indicating the proper way to do it]. 2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root hub (WUSB doesn't have non-root hubs). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:29 -07:00
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_VARIABLE;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
udev->speed = USB_SPEED_LOW;
else
udev->speed = USB_SPEED_FULL;
return 0;
}
/* switch to the long delay after two short delay failures */
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
dev_dbg (hub->intfdev,
"port %d not reset yet, waiting %dms\n",
port1, delay);
}
return -EBUSY;
}
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay)
{
int i, status;
/* Reset the port */
for (i = 0; i < PORT_RESET_TRIES; i++) {
status = set_port_feature(hub->hdev,
port1, USB_PORT_FEAT_RESET);
if (status)
dev_err(hub->intfdev,
"cannot reset port %d (err = %d)\n",
port1, status);
else {
status = hub_port_wait_reset(hub, port1, udev, delay);
[PATCH] USB: get rid of minor log spamming Routine cases like handoff-to-companion shouldn't trigger diagnostics. This gets rid of some recently added log spamming. It's routine for hub_port_wait_reset() to return -ENOTCONN to indicate handoff from highspeed hubs to companions, so an error message is incorrect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 10:45:25 -07:00
if (status && status != -ENOTCONN)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(hub->intfdev,
"port_wait_reset: err = %d\n",
status);
}
/* return on disconnect or reset */
switch (status) {
case 0:
[PATCH] USB: relax usbcore reset timings This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-31 10:41:44 -07:00
/* TRSTRCY = 10 ms; plus some extra */
msleep(10 + 40);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* FALL THROUGH */
case -ENOTCONN:
case -ENODEV:
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
/* FIXME need disconnect() for NOTATTACHED device */
usb_set_device_state(udev, status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
return status;
}
dev_dbg (hub->intfdev,
"port %d not enabled, trying reset again...\n",
port1);
delay = HUB_LONG_RESET_TIME;
}
dev_err (hub->intfdev,
"Cannot enable port %i. Maybe the USB cable is bad?\n",
port1);
return status;
}
/*
* Disable a port and mark a logical connnect-change event, so that some
* time later khubd will disconnect() any existing usb_device on the port
* and will re-enumerate if there actually is a device attached.
*/
static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
{
dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
hub_port_disable(hub, port1, 1);
/* FIXME let caller ask to power down the port:
* - some devices won't enumerate without a VBUS power cycle
* - SRP saves power that way
[PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-09-13 19:57:27 -07:00
* - ... new call, TBD ...
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* That's easy if this hub can switch power per-port, and
* khubd reactivates the port later (timer, SRP, etc).
* Powerdown must be optional, because of reset/DFU.
*/
set_bit(port1, hub->change_bits);
kick_khubd(hub);
}
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#ifdef CONFIG_PM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifdef CONFIG_USB_SUSPEND
/*
* Selective port suspend reduces power; most suspended devices draw
* less than 500 uA. It's also used in OTG, along with remote wakeup.
* All devices below the suspended port are also suspended.
*
* Devices leave suspend state when the host wakes them up. Some devices
* also support "remote wakeup", where the device can activate the USB
* tree above them to deliver data, such as a keypress or packet. In
* some cases, this wakes the USB host.
*/
static int hub_port_suspend(struct usb_hub *hub, int port1,
struct usb_device *udev)
{
int status;
// dev_dbg(hub->intfdev, "suspend port %d\n", port1);
/* enable remote wakeup when appropriate; this lets the device
* wake up the upstream hub (including maybe the root hub).
*
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
if (udev->do_remote_wakeup) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (status)
dev_dbg(&udev->dev,
"won't remote wakeup, status %d\n",
status);
}
/* see 7.1.7.6 */
status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
if (status) {
dev_dbg(hub->intfdev,
"can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
(void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
dev_dbg(&udev->dev, "usb %ssuspend\n",
udev->auto_pm ? "auto-" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
return status;
}
/*
* Devices on USB hub ports have only one "suspend" state, corresponding
[PATCH] USB: fix up remaining pm_message_t usages Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 17:39:24 -07:00
* to ACPI D2, "may cause the device to lose some context".
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* State transitions include:
*
* - suspend, resume ... when the VBUS power link stays live
* - suspend, disconnect ... VBUS lost
*
* Once VBUS drop breaks the circuit, the port it's using has to go through
* normal re-enumeration procedures, starting with enabling VBUS power.
* Other than re-initializing the hub (plug/unplug, except for root hubs),
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
[PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-09-13 19:57:27 -07:00
*
* If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
* the root hub for their bus goes into global suspend ... so we don't
* (falsely) update the device power state to say it suspended.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
static int __usb_port_suspend (struct usb_device *udev, int port1)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
int status = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* caller owns the udev device lock */
if (port1 < 0)
return port1;
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
/* we change the device's upstream USB link,
* but root hubs have no upstream USB link.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
if (udev->parent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
usbcore: set device and power states properly This patch (as733) fixes up the places where device states and power states are set in usbcore. Right now things are duplicated or missing; this should straighten things out. The idea is that udev->state is USB_STATE_SUSPENDED exactly when the device's upstream port has been suspended, whereas udev->dev.power.power_state.event reflects the result of the last call to the suspend/resume routines (which might not actually change the device state, especially if CONFIG_USB_SUSPEND isn't set). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:12:19 -07:00
else {
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
dev_dbg(&udev->dev, "usb %ssuspend\n",
udev->auto_pm ? "auto-" : "");
usbcore: set device and power states properly This patch (as733) fixes up the places where device states and power states are set in usbcore. Right now things are duplicated or missing; this should straighten things out. The idea is that udev->state is USB_STATE_SUSPENDED exactly when the device's upstream port has been suspended, whereas udev->dev.power.power_state.event reflects the result of the last call to the suspend/resume routines (which might not actually change the device state, especially if CONFIG_USB_SUSPEND isn't set). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:12:19 -07:00
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return status;
}
[PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
2005-09-22 22:45:26 -07:00
/*
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
* usb_port_suspend - suspend a usb device's upstream port
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* @udev: device that's no longer in active use
[PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
2005-09-22 22:45:26 -07:00
* Context: must be able to sleep; device not locked; pm locks held
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* Suspends a USB device that isn't in active use, conserving power.
* Devices may wake out of a suspend, if anything important happens,
* using the remote wakeup mechanism. They may also be taken out of
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
* suspend by the host, using usb_port_resume(). It's also routine
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* to disconnect devices while they are suspended.
*
[PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-09-13 19:57:27 -07:00
* This only affects the USB hardware for a device; its interfaces
* (and, for hubs, child devices) must already have been suspended.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* Suspending OTG devices may trigger HNP, if that's been enabled
* between a pair of dual-role devices. That will change roles, such
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
*
* Returns 0 on success, else negative errno.
*/
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
int usb_port_suspend(struct usb_device *udev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
return __usb_port_suspend(udev, udev->portnum);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
[PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-09-13 19:57:27 -07:00
* If the USB "suspend" state is in use (rather than "global suspend"),
* many devices will be individually taken out of suspend state using
* special" resume" signaling. These routines kick in shortly after
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* hardware resume signaling is finished, either because of selective
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
*/
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
static int finish_port_resume(struct usb_device *udev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
int status;
u16 devstatus;
/* caller owns the udev device lock */
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
dev_dbg(&udev->dev, "finish resume\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
* first two on the host side; they'd be inside hub_port_init()
* during many timeouts, but khubd can't suspend until later.
*/
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
* and device drivers will know about any resume quirks.
*/
status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
[PATCH] USB hub: don't return status > 0 from resume finish_device_resume() in the hub driver isn't careful always to return a negative code in all the error pathways. It also doesn't return 0 in all the success pathways. This patch (as724) fixes the behavior. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19 12:12:38 -07:00
if (status >= 0)
status = (status == 2 ? 0 : -ENODEV);
if (status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(&udev->dev,
"gone after usb resume? status %d\n",
status);
else if (udev->actconfig) {
le16_to_cpus(&devstatus);
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
&& udev->parent) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
if (status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(&udev->dev, "disable remote "
"wakeup, status %d\n", status);
[PATCH] USB: Fix locking for USB suspend/resume The earlier USB locking updates didn't touch the suspend/resume routines. They need updating as well, since now the caller holds the device semaphore. This patch (as608) makes the necessary changes. It also adds a line to store the correct power state when a device is resumed, something which was unaccountably missing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-21 09:58:07 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
status = 0;
} else if (udev->devnum <= 0) {
dev_dbg(&udev->dev, "bogus resume!\n");
status = -EINVAL;
}
return status;
}
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
int status;
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
usbcore: khubd and busy-port handling We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11 13:52:39 -07:00
set_bit(port1, hub->busy_bits);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* see 7.1.7.7; affects power usage, but not budgeting */
status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
if (status) {
dev_dbg(hub->intfdev,
"can't resume port %d, status %d\n",
port1, status);
} else {
u16 devstatus;
u16 portchange;
/* drive resume for at least 20 msec */
if (udev)
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
dev_dbg(&udev->dev, "usb %sresume\n",
udev->auto_pm ? "auto-" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
msleep(25);
#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
| USB_PORT_STAT_ENABLE \
| USB_PORT_STAT_CONNECTION)
/* Virtual root hubs can trigger on GET_PORT_STATUS to
* stop resume signaling. Then finish the resume
* sequence.
*/
devstatus = portchange = 0;
status = hub_port_status(hub, port1,
&devstatus, &portchange);
if (status < 0
|| (devstatus & LIVE_FLAGS) != LIVE_FLAGS
|| (devstatus & USB_PORT_STAT_SUSPEND) != 0
) {
dev_dbg(hub->intfdev,
"port %d status %04x.%04x after resume, %d\n",
port1, portchange, devstatus, status);
[PATCH] usbcore: fixes for hub_port_resume This patch (as731) makes a couple of small fixes to the hub_port_resume routine: Don't return status >= 0 when an error occurs; Clear the port-change-suspend status indicator after resuming a device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-28 08:20:41 -07:00
if (status >= 0)
status = -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
} else {
[PATCH] usbcore: fixes for hub_port_resume This patch (as731) makes a couple of small fixes to the hub_port_resume routine: Don't return status >= 0 when an error occurs; Clear the port-change-suspend status indicator after resuming a device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-28 08:20:41 -07:00
if (portchange & USB_PORT_STAT_C_SUSPEND)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_SUSPEND);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
status = finish_port_resume(udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
}
if (status < 0)
hub_port_logical_disconnect(hub, port1);
usbcore: khubd and busy-port handling We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11 13:52:39 -07:00
clear_bit(port1, hub->busy_bits);
if (!hub->hdev->parent && !hub->busy_bits[0])
usb_enable_root_hub_irq(hub->hdev->bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return status;
}
[PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
2005-09-22 22:45:26 -07:00
/*
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
* usb_port_resume - re-activate a suspended usb device's upstream port
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
* @udev: device to re-activate
[PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
2005-09-22 22:45:26 -07:00
* Context: must be able to sleep; device not locked; pm locks held
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
* USB resume explicitly guarantees that the power session between
* the host and the device is the same as it was when the device
* suspended.
*
* Returns 0 on success, else negative errno.
*/
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
int usb_port_resume(struct usb_device *udev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
int status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
/* we change the device's upstream USB link,
* but root hubs have no upstream USB link.
*/
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
if (udev->parent) {
usbcore: fix up device and power state tests This patch (as734) rationalizes the various tests of device state and power states. There are duplications and mistaken tests in several places. Perhaps the most interesting challenge is where the hub driver tests to see that all the child devices are suspended before allowing itself to be suspended. When CONFIG_USB_SUSPEND is set the test is straightforward, since we expect that the children _will_ be suspended. But when CONFIG_USB_SUSPEND isn't set, it's not so clear what should be done. The code compromises by checking the child's power.power_state.event field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:13:04 -07:00
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
} else {
dev_dbg(&udev->dev, "usb %sresume\n",
udev->auto_pm ? "auto-" : "");
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
status = finish_port_resume(udev);
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
}
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
if (status < 0)
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return status;
}
static int remote_wakeup(struct usb_device *udev)
{
int status = 0;
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
/* All this just to avoid sending a port-resume message
* to the parent hub! */
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
usb_lock_device(udev);
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
mutex_lock_nested(&udev->pm_mutex, udev->level);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (udev->state == USB_STATE_SUSPENDED) {
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* TRSMRCY = 10 msec */
msleep(10);
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
status = finish_port_resume(udev);
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
if (status == 0)
udev->dev.power.power_state.event = PM_EVENT_ON;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
mutex_unlock(&udev->pm_mutex);
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
if (status == 0)
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
usb_autoresume_device(udev, 0);
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17 15:10:32 -07:00
usb_unlock_device(udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return status;
}
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#else /* CONFIG_USB_SUSPEND */
/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */
int usb_port_suspend(struct usb_device *udev)
{
return 0;
}
static inline int
finish_port_resume(struct usb_device *udev)
{
return 0;
}
static inline int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
return 0;
}
int usb_port_resume(struct usb_device *udev)
{
return 0;
}
static inline int remote_wakeup(struct usb_device *udev)
{
return 0;
}
#endif
[PATCH] usb_interface power state This updates the handling of power state for USB interfaces. - Formalizes an existing invariant: interface "power state" is a boolean: ON when I/O is allowed, and FREEZE otherwise. It does so by defining some inlined helpers, then using them. - Adds a useful invariant: the only interfaces marked active are those bound to non-suspended drivers. Later patches build on this invariant. - Simplifies the interface driver API (and removes some error paths) by removing the requirement that they record power state changes during suspend and resume callbacks. Now usbcore does that. A few drivers were simplified to address that last change. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 33 +++++++++------------ drivers/usb/core/message.c | 1 drivers/usb/core/usb.c | 65 +++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 +++++++++++ drivers/usb/input/hid-core.c | 2 - drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 - drivers/usb/net/usbnet.c | 2 - 8 files changed, 85 insertions(+), 48 deletions(-)
2005-09-13 19:56:33 -07:00
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
[PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13 19:57:04 -07:00
/* fail if children aren't already suspended */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
usbcore: fix up device and power state tests This patch (as734) rationalizes the various tests of device state and power states. There are duplications and mistaken tests in several places. Perhaps the most interesting challenge is where the hub driver tests to see that all the child devices are suspended before allowing itself to be suspended. When CONFIG_USB_SUSPEND is set the test is straightforward, since we expect that the children _will_ be suspended. But when CONFIG_USB_SUSPEND isn't set, it's not so clear what should be done. The code compromises by checking the child's power.power_state.event field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:13:04 -07:00
if (udev && msg.event == PM_EVENT_SUSPEND &&
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
#ifdef CONFIG_USB_SUSPEND
usbcore: fix up device and power state tests This patch (as734) rationalizes the various tests of device state and power states. There are duplications and mistaken tests in several places. Perhaps the most interesting challenge is where the hub driver tests to see that all the child devices are suspended before allowing itself to be suspended. When CONFIG_USB_SUSPEND is set the test is straightforward, since we expect that the children _will_ be suspended. But when CONFIG_USB_SUSPEND isn't set, it's not so clear what should be done. The code compromises by checking the child's power.power_state.event field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:13:04 -07:00
udev->state != USB_STATE_SUSPENDED
#else
udev->dev.power.power_state.event
== PM_EVENT_ON
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
#endif
usbcore: fix up device and power state tests This patch (as734) rationalizes the various tests of device state and power states. There are duplications and mistaken tests in several places. Perhaps the most interesting challenge is where the hub driver tests to see that all the child devices are suspended before allowing itself to be suspended. When CONFIG_USB_SUSPEND is set the test is straightforward, since we expect that the children _will_ be suspended. But when CONFIG_USB_SUSPEND isn't set, it's not so clear what should be done. The code compromises by checking the child's power.power_state.event field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:13:04 -07:00
) {
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
if (!hdev->auto_pm)
dev_dbg(&intf->dev, "port %d nyet suspended\n",
port1);
[PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13 19:57:04 -07:00
return -EBUSY;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
/* "global suspend" of the downstream HC-to-USB interface */
if (!hdev->parent) {
struct usb_bus *bus = hdev->bus;
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 14:08:02 -07:00
if (bus) {
int status = hcd_bus_suspend (bus);
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
if (status != 0) {
dev_dbg(&hdev->dev, "'global' suspend %d\n",
status);
return status;
}
} else
return -EOPNOTSUPP;
}
[PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13 19:57:04 -07:00
/* stop khubd and related activity */
hub_quiesce(hub);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
}
static int hub_resume(struct usb_interface *intf)
{
struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
int status;
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
/* "global resume" of the downstream HC-to-USB interface */
if (!hdev->parent) {
struct usb_bus *bus = hdev->bus;
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 14:08:02 -07:00
if (bus) {
status = hcd_bus_resume (bus);
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
if (status) {
dev_dbg(&intf->dev, "'global' resume %d\n",
status);
return status;
}
} else
return -EOPNOTSUPP;
if (status == 0) {
/* TRSMRCY = 10 msec */
msleep(10);
}
}
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
/* tell khubd to look for changes on this hub */
[PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
2005-09-22 22:37:29 -07:00
hub_activate(hub);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
}
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#else /* CONFIG_PM */
static inline int remote_wakeup(struct usb_device *udev)
{
return 0;
}
USB: usb-hub-driver-improve-use-of-ifdef fix Fix CONFIG_PM=n build. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14 23:11:02 -07:00
#define hub_suspend NULL
#define hub_resume NULL
hub driver: improve use of #ifdef This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:14:24 -07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
void usb_resume_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
hub->resume_root_hub = 1;
kick_khubd(hub);
}
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
* Between connect detection and reset signaling there must be a delay
* of 100ms at least for debounce and power-settling. The corresponding
* timer shall restart whenever the downstream port detects a disconnect.
*
* Apparently there are some bluetooth and irda-dongles and a number of
* low-speed devices for which this debounce period may last over a second.
* Not covered by the spec - but easy to deal with.
*
* This implementation uses a 1500ms total debounce timeout; if the
* connection isn't stable by then it returns -ETIMEDOUT. It checks
* every 25ms for transient disconnects. When the port status has been
* unchanged for 100ms it returns the port status.
*/
#define HUB_DEBOUNCE_TIMEOUT 1500
#define HUB_DEBOUNCE_STEP 25
#define HUB_DEBOUNCE_STABLE 100
static int hub_port_debounce(struct usb_hub *hub, int port1)
{
int ret;
int total_time, stable_time = 0;
u16 portchange, portstatus;
unsigned connection = 0xffff;
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
ret = hub_port_status(hub, port1, &portstatus, &portchange);
if (ret < 0)
return ret;
if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
(portstatus & USB_PORT_STAT_CONNECTION) == connection) {
stable_time += HUB_DEBOUNCE_STEP;
if (stable_time >= HUB_DEBOUNCE_STABLE)
break;
} else {
stable_time = 0;
connection = portstatus & USB_PORT_STAT_CONNECTION;
}
if (portchange & USB_PORT_STAT_C_CONNECTION) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
}
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
break;
msleep(HUB_DEBOUNCE_STEP);
}
dev_dbg (hub->intfdev,
"debounce: port %d: total %dms stable %dms status 0x%x\n",
port1, total_time, stable_time, portstatus);
if (stable_time < HUB_DEBOUNCE_STABLE)
return -ETIMEDOUT;
return portstatus;
}
static void ep0_reinit(struct usb_device *udev)
{
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
}
#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
static int hub_set_address(struct usb_device *udev)
{
int retval;
if (udev->devnum == 0)
return -EINVAL;
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval == 0) {
usb_set_device_state(udev, USB_STATE_ADDRESS);
ep0_reinit(udev);
}
return retval;
}
/* Reset device, (re)assign address, get device descriptor.
* Device connection must be stable, no more debouncing needed.
* Returns device in USB_STATE_ADDRESS, except on error.
*
* If this is called for an already-existing device (as part of
* usb_reset_device), the caller must own the device lock. For a
* newly detected device that is not accessible through any global
* pointers, it's not necessary to lock the device.
*/
static int
hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
int retry_counter)
{
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 07:55:29 -07:00
static DEFINE_MUTEX(usb_address0_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
struct usb_device *hdev = hub->hdev;
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
wusb: pretty print new wireless USB devices when they connect New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:31 -07:00
char *speed, *type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
*/
if (!hdev->parent) {
delay = HUB_ROOT_RESET_TIME;
if (port1 == hdev->bus->otg_port)
hdev->bus->b_hnp_enable = 0;
}
/* Some low speed devices have problems with the quick delay, so */
/* be a bit pessimistic with those devices. RHbug #23670 */
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 07:55:29 -07:00
mutex_lock(&usb_address0_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Reset the device; full speed may morph to high speed */
retval = hub_port_reset(hub, port1, udev, delay);
if (retval < 0) /* error or disconnect */
goto fail;
/* success, speed is known */
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
dev_dbg(&udev->dev, "device reset changed speed!\n");
goto fail;
}
oldspeed = udev->speed;
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
wusb: handle wusb device ep0 speed settings This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:30 -07:00
* For Wireless USB devices, ep0 max packet is always 512 (tho
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
switch (udev->speed) {
wusb: handle wusb device ep0 speed settings This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:30 -07:00
case USB_SPEED_VARIABLE: /* fixed at 512 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
case USB_SPEED_HIGH: /* fixed at 64 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
/* to determine the ep0 maxpacket size, try to read
* the device descriptor to get bMaxPacketSize0 and
* then correct our initial guess.
*/
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
case USB_SPEED_LOW: /* fixed at 8 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
break;
default:
goto fail;
}
wusb: pretty print new wireless USB devices when they connect New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:31 -07:00
type = "";
switch (udev->speed) {
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
case USB_SPEED_VARIABLE:
speed = "variable";
type = "Wireless ";
break;
default: speed = "?"; break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_info (&udev->dev,
wusb: pretty print new wireless USB devices when they connect New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:31 -07:00
"%s %s speed %sUSB device using %s and address %d\n",
(udev->config) ? "reset" : "new", speed, type,
udev->bus->controller->driver->name, udev->devnum);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* Set up TT records, if needed */
if (hdev->tt) {
udev->tt = hdev->tt;
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
udev->tt = &hub->tt;
udev->ttport = port1;
}
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* Because device hardware and firmware is sometimes buggy in
* this area, and this is how Linux has done it for ages.
* Change it cautiously.
*
* NOTE: If USE_NEW_SCHEME() is true we will start by issuing
* a 64-byte GET_DESCRIPTOR request. This is what Windows does,
* so it may help with some non-standards-compliant devices.
* Otherwise we start with SET_ADDRESS and then try to read the
* first 8 bytes of the device descriptor to get the ep0 maxpacket
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
if (USE_NEW_SCHEME(retry_counter)) {
struct usb_device_descriptor *buf;
int r = 0;
#define GET_DESCRIPTOR_BUFSIZE 64
buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
if (!buf) {
retval = -ENOMEM;
continue;
}
/* Use a short timeout the first time through,
* so that recalcitrant full-speed devices with
* 8- or 16-byte ep0-maxpackets won't slow things
* down tremendously by NAKing the unexpectedly
* early status stage. Also, retry on all errors;
* some devices are flakey.
wusb: handle wusb device ep0 speed settings This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:30 -07:00
* 255 is for WUSB devices, we actually need to use 512.
* WUSB1.0[4.8.1].
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
r = usb_control_msg(udev, usb_rcvaddr0pipe(),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
switch (buf->bMaxPacketSize0) {
wusb: handle wusb device ep0 speed settings This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:30 -07:00
case 8: case 16: case 32: case 64: case 255:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (buf->bDescriptorType ==
USB_DT_DEVICE) {
r = 0;
break;
}
/* FALL THROUGH */
default:
if (r == 0)
r = -EPROTO;
break;
}
if (r == 0)
break;
}
udev->descriptor.bMaxPacketSize0 =
buf->bMaxPacketSize0;
kfree(buf);
retval = hub_port_reset(hub, port1, udev, delay);
if (retval < 0) /* error or disconnect */
goto fail;
if (oldspeed != udev->speed) {
dev_dbg(&udev->dev,
"device reset changed speed!\n");
retval = -ENODEV;
goto fail;
}
if (r) {
dev_err(&udev->dev, "device descriptor "
"read/%s, error %d\n",
"64", r);
retval = -EMSGSIZE;
continue;
}
#undef GET_DESCRIPTOR_BUFSIZE
}
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev);
if (retval >= 0)
break;
msleep(200);
}
if (retval < 0) {
dev_err(&udev->dev,
"device not accepting address %d, error %d\n",
udev->devnum, retval);
goto fail;
}
/* cope with hardware quirkiness:
* - let SET_ADDRESS settle, some device hardware wants it
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
if (USE_NEW_SCHEME(retry_counter))
break;
retval = usb_get_device_descriptor(udev, 8);
if (retval < 8) {
dev_err(&udev->dev, "device descriptor "
"read/%s, error %d\n",
"8", retval);
if (retval >= 0)
retval = -EMSGSIZE;
} else {
retval = 0;
break;
}
}
if (retval)
goto fail;
wusb: handle wusb device ep0 speed settings This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-25 19:35:30 -07:00
i = udev->descriptor.bMaxPacketSize0 == 0xff?
512 : udev->descriptor.bMaxPacketSize0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
dev_err(&udev->dev, "ep0 maxpacket = %d\n", i);
retval = -EMSGSIZE;
goto fail;
}
dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
ep0_reinit(udev);
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
if (retval < (signed)sizeof(udev->descriptor)) {
dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
"all", retval);
if (retval >= 0)
retval = -ENOMSG;
goto fail;
}
retval = 0;
fail:
if (retval)
hub_port_disable(hub, port1, 0);
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 07:55:29 -07:00
mutex_unlock(&usb_address0_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return retval;
}
static void
check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
{
struct usb_qualifier_descriptor *qual;
int status;
qual = kmalloc (sizeof *qual, SLAB_KERNEL);
if (qual == NULL)
return;
status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
qual, sizeof *qual);
if (status == sizeof *qual) {
dev_info(&udev->dev, "not running at top speed; "
"connect to a high speed hub\n");
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
schedule_work (&hub->leds);
}
}
[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
2005-04-18 17:39:34 -07:00
kfree(qual);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static unsigned
hub_power_remaining (struct usb_hub *hub)
{
struct usb_device *hdev = hub->hdev;
int remaining;
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
int port1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (!hub->limited_power)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
struct usb_device *udev = hdev->children[port1 - 1];
int delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!udev)
continue;
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
/* Unconfigured devices may not use more than 100mA,
* or 8mA for OTG ports */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (udev->actconfig)
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
delta = udev->actconfig->desc.bMaxPower * 2;
else if (port1 != udev->bus->otg_port || hdev->parent)
delta = 100;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
else
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
delta = 8;
if (delta > hub->mA_per_port)
dev_warn(&udev->dev, "%dmA is over %umA budget "
"for port %d!\n",
delta, hub->mA_per_port, port1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
remaining -= delta;
}
if (remaining < 0) {
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
dev_warn(hub->intfdev, "%dmA over power budget!\n",
- remaining);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
remaining = 0;
}
return remaining;
}
/* Handle physical or logical connection change events.
* This routine is called when:
* a port connection-change occurs;
* a port enable-change occurs (often caused by EMI);
* usb_reset_device() encounters changed descriptors (as from
* a firmware download)
* caller already locked the hub
*/
static void hub_port_connect_change(struct usb_hub *hub, int port1,
u16 portstatus, u16 portchange)
{
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
int status, i;
dev_dbg (hub_dev,
"port %d, status %04x, change %04x, %s\n",
port1, portstatus, portchange, portspeed (portstatus));
if (hub->has_indicators) {
set_port_led(hub, port1, HUB_LED_AUTO);
hub->indicator[port1-1] = INDICATOR_AUTO;
}
/* Disconnect any existing devices under this port */
if (hdev->children[port1-1])
usb_disconnect(&hdev->children[port1-1]);
clear_bit(port1, hub->change_bits);
#ifdef CONFIG_USB_OTG
/* during HNP, don't repeat the debounce */
if (hdev->bus->is_b_host)
portchange &= ~USB_PORT_STAT_C_CONNECTION;
#endif
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hub, port1);
if (status < 0) {
dev_err (hub_dev,
"connect-debounce failed, port %d disabled\n",
port1);
goto done;
}
portstatus = status;
}
/* Return now if nothing is connected */
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
/* maybe switch power back on (e.g. root hub was reset) */
[PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
2005-06-20 21:15:16 -07:00
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
return;
}
#ifdef CONFIG_USB_SUSPEND
/* If something is connected, but the port is suspended, wake it up. */
if (portstatus & USB_PORT_STAT_SUSPEND) {
status = hub_port_resume(hub, port1, NULL);
if (status < 0) {
dev_dbg(hub_dev,
"can't clear suspend on port %d; %d\n",
port1, status);
goto done;
}
}
#endif
for (i = 0; i < SET_CONFIG_TRIES; i++) {
struct usb_device *udev;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
*/
udev = usb_alloc_dev(hdev, hdev->bus, port1);
if (!udev) {
dev_err (hub_dev,
"couldn't allocate port %d usb_device\n",
port1);
goto done;
}
usb_set_device_state(udev, USB_STATE_POWERED);
udev->speed = USB_SPEED_UNKNOWN;
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
udev->bus_mA = hub->mA_per_port;
usbcore: store each usb_device's level in the tree This patch (as778) adds a field to struct usb_device to store the device's level in the USB tree. In itself this number isn't really important. But the overhead is very low, and in a later patch it will be used for preventing bogus warnings from the lockdep checker. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:46:48 -07:00
udev->level = hdev->level + 1;
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* set the address */
choose_address(udev);
if (udev->devnum <= 0) {
status = -ENOTCONN; /* Don't retry */
goto loop;
}
/* reset and get descriptor */
status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
/* consecutive bus-powered hubs aren't reliable; they can
* violate the voltage drop budget. if the new child has
* a "powered" LED, users should notice we didn't enable it
* (without reading syslog), even without per-port LEDs
* on the parent.
*/
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
&& udev->bus_mA <= 100) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u16 devstat;
status = usb_get_status(udev, USB_RECIP_DEVICE, 0,
&devstat);
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (status < 2) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
dev_dbg(&udev->dev, "get status %d ?\n", status);
goto loop_disable;
}
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
le16_to_cpus(&devstat);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
dev_err(&udev->dev,
"can't connect bus-powered hub "
"to this port\n");
if (hub->has_indicators) {
hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
schedule_work (&hub->leds);
}
status = -ENOTCONN; /* Don't retry */
goto loop_disable;
}
}
/* check for devices running slower than they could */
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
&& highspeed_hubs != 0)
check_highspeed (hub, udev, port1);
/* Store the parent's children[] pointer. At this point
* udev becomes globally accessible, although presumably
* no one will look at it until hdev is unlocked.
*/
status = 0;
/* We mustn't add new devices if the parent hub has
* been disconnected; we would race with the
* recursively_mark_NOTATTACHED() routine.
*/
spin_lock_irq(&device_state_lock);
if (hdev->state == USB_STATE_NOTATTACHED)
status = -ENOTCONN;
else
hdev->children[port1-1] = udev;
spin_unlock_irq(&device_state_lock);
/* Run it through the hoops (find a driver, etc) */
if (!status) {
status = usb_new_device(udev);
if (status) {
spin_lock_irq(&device_state_lock);
hdev->children[port1-1] = NULL;
spin_unlock_irq(&device_state_lock);
}
}
if (status)
goto loop_disable;
status = hub_power_remaining(hub);
if (status)
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
dev_dbg(hub_dev, "%dmA power budget left\n", status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return;
loop_disable:
hub_port_disable(hub, port1, 1);
loop:
ep0_reinit(udev);
release_address(udev);
usb_put_dev(udev);
if (status == -ENOTCONN)
break;
}
done:
hub_port_disable(hub, port1, 1);
}
static void hub_events(void)
{
struct list_head *tmp;
struct usb_device *hdev;
struct usb_interface *intf;
struct usb_hub *hub;
struct device *hub_dev;
u16 hubstatus;
u16 hubchange;
u16 portstatus;
u16 portchange;
int i, ret;
int connect_change;
/*
* We restart the list every time to avoid a deadlock with
* deleting hubs downstream from this one. This should be
* safe since we delete the hub from the event list.
* Not the most efficient, but avoids deadlocks.
*/
while (1) {
/* Grab the first entry at the beginning of the list */
spin_lock_irq(&hub_event_lock);
if (list_empty(&hub_event_list)) {
spin_unlock_irq(&hub_event_lock);
break;
}
tmp = hub_event_list.next;
list_del_init(tmp);
hub = list_entry(tmp, struct usb_hub, event_list);
hdev = hub->hdev;
intf = to_usb_interface(hub->intfdev);
hub_dev = &intf->dev;
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-22 22:32:24 -07:00
i = hub->resume_root_hub;
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-22 22:32:24 -07:00
(u16) hub->event_bits[0],
i ? ", resume root" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
usb_get_intf(intf);
spin_unlock_irq(&hub_event_lock);
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
if (locktree(hdev) < 0) {
usb_put_intf(intf);
continue;
}
if (hub != usb_get_intfdata(intf))
goto loop;
/* If the hub has died, clean up after it */
if (hdev->state == USB_STATE_NOTATTACHED) {
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
hub->error = -ENODEV;
hub_pre_reset(intf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto loop;
}
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
/* Is this is a root hub wanting to reactivate the downstream
* ports? If so, be sure the interface resumes even if its
* stub "device" node was never suspended.
*/
if (i)
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
usb_autoresume_device(hdev, 0);
usbcore: resume device resume recursion This patch (as717b) removes the existing recursion in hub resume code: Resuming a hub will no longer automatically resume the devices attached to the hub. At the same time, it adds one level of recursion: Suspending a USB device will automatically suspend all the device's interfaces. Failure at an intermediate stage will cause all the already-suspended interfaces to be resumed. Attempts to suspend or resume an interface by itself will do nothing, although they won't return an error. Thus the regular system-suspend and system-resume procedures should continue to work as before; only runtime PM will be affected. The patch also removes the code that tests state of the interfaces before suspending a device. It's no longer needed, since everything gets suspended together. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:11:02 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* If this is an inactive or suspended hub, do nothing */
if (hub->quiescing)
goto loop;
if (hub->error) {
dev_dbg (hub_dev, "resetting for error %d\n",
hub->error);
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
ret = usb_reset_composite_device(hdev, intf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (ret) {
dev_dbg (hub_dev,
"error resetting hub: %d\n", ret);
goto loop;
}
hub->nerrors = 0;
hub->error = 0;
}
/* deal with port status changes */
for (i = 1; i <= hub->descriptor->bNbrPorts; i++) {
if (test_bit(i, hub->busy_bits))
continue;
connect_change = test_bit(i, hub->change_bits);
if (!test_and_clear_bit(i, hub->event_bits) &&
!connect_change && !hub->activating)
continue;
ret = hub_port_status(hub, i,
&portstatus, &portchange);
if (ret < 0)
continue;
if (hub->activating && !hdev->children[i-1] &&
(portstatus &
USB_PORT_STAT_CONNECTION))
connect_change = 1;
if (portchange & USB_PORT_STAT_C_CONNECTION) {
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_CONNECTION);
connect_change = 1;
}
if (portchange & USB_PORT_STAT_C_ENABLE) {
if (!connect_change)
dev_dbg (hub_dev,
"port %d enable change, "
"status %08x\n",
i, portstatus);
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_ENABLE);
/*
* EM interference sometimes causes badly
* shielded USB devices to be shutdown by
* the hub, this hack enables them again.
* Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
&& hdev->children[i-1]) {
dev_err (hub_dev,
"port %i "
"disabled by hub (EMI?), "
"re-enabling...\n",
i);
connect_change = 1;
}
}
if (portchange & USB_PORT_STAT_C_SUSPEND) {
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_SUSPEND);
if (hdev->children[i-1]) {
ret = remote_wakeup(hdev->
children[i-1]);
if (ret < 0)
connect_change = 1;
} else {
ret = -ENODEV;
hub_port_disable(hub, i, 1);
}
dev_dbg (hub_dev,
"resume on port %d, status %d\n",
i, ret);
}
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
dev_err (hub_dev,
"over-current change on port %d\n",
i);
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_OVER_CURRENT);
hub_power_on(hub);
}
if (portchange & USB_PORT_STAT_C_RESET) {
dev_dbg (hub_dev,
"reset change on port %d\n",
i);
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_RESET);
}
if (connect_change)
hub_port_connect_change(hub, i,
portstatus, portchange);
} /* end for i */
/* deal with hub status changes */
if (test_and_clear_bit(0, hub->event_bits) == 0)
; /* do nothing */
else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
dev_err (hub_dev, "get_hub_status failed\n");
else {
if (hubchange & HUB_CHANGE_LOCAL_POWER) {
dev_dbg (hub_dev, "power change\n");
clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
[PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:03:12 -07:00
if (hubstatus & HUB_STATUS_LOCAL_POWER)
/* FIXME: Is this always true? */
hub->limited_power = 0;
else
hub->limited_power = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
if (hubchange & HUB_CHANGE_OVERCURRENT) {
dev_dbg (hub_dev, "overcurrent change\n");
msleep(500); /* Cool down */
clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
hub_power_on(hub);
}
}
hub->activating = 0;
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-21 12:56:37 -07:00
/* If this is a root hub, tell the HCD it's okay to
* re-enable port-change interrupts now. */
usbcore: khubd and busy-port handling We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11 13:52:39 -07:00
if (!hdev->parent && !hub->busy_bits[0])
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-21 12:56:37 -07:00
usb_enable_root_hub_irq(hdev->bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
loop:
usb_unlock_device(hdev);
usb_put_intf(intf);
} /* end while (1) */
}
static int hub_thread(void *__unused)
{
do {
hub_events();
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
wait_event_interruptible(khubd_wait,
!list_empty(&hub_event_list) ||
kthread_should_stop());
[PATCH] Cleanup patch for process freezing 1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 23:13:50 -07:00
try_to_freeze();
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
} while (!kthread_should_stop() || !list_empty(&hub_event_list));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
pr_debug("%s: khubd exiting\n", usbcore_name);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static struct usb_device_id hub_id_table [] = {
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
.bInterfaceClass = USB_CLASS_HUB},
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, hub_id_table);
static struct usb_driver hub_driver = {
.name = "hub",
.probe = hub_probe,
.disconnect = hub_disconnect,
.suspend = hub_suspend,
.resume = hub_resume,
[PATCH] USB hub: use usb_reset_composite_device This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:37:24 -07:00
.pre_reset = hub_pre_reset,
.post_reset = hub_post_reset,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.ioctl = hub_ioctl,
.id_table = hub_id_table,
};
int usb_hub_init(void)
{
if (usb_register(&hub_driver) < 0) {
printk(KERN_ERR "%s: can't register hub driver\n",
usbcore_name);
return -1;
}
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
khubd_task = kthread_run(hub_thread, NULL, "khubd");
if (!IS_ERR(khubd_task))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
/* Fall through if kernel_thread failed */
usb_deregister(&hub_driver);
printk(KERN_ERR "%s: can't start khubd\n", usbcore_name);
return -1;
}
void usb_hub_cleanup(void)
{
[PATCH] USB: khubd: use kthread API Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 14:29:58 -07:00
kthread_stop(khubd_task);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Hub resources are freed for us by usb_deregister. It calls
* usb_driver_purge on every device which in turn calls that
* devices disconnect function if it is using this driver.
* The hub_disconnect function takes care of releasing the
* individual hub resources. -greg
*/
usb_deregister(&hub_driver);
} /* usb_hub_cleanup() */
static int config_descriptors_changed(struct usb_device *udev)
{
unsigned index;
unsigned len = 0;
struct usb_config_descriptor *buf;
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
if (len < le16_to_cpu(udev->config[index].desc.wTotalLength))
len = le16_to_cpu(udev->config[index].desc.wTotalLength);
}
buf = kmalloc (len, SLAB_KERNEL);
if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
return 1;
}
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
int length;
int old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
old_length);
if (length < old_length) {
dev_dbg(&udev->dev, "config index %d, error %d\n",
index, length);
break;
}
if (memcmp (buf, udev->rawdescriptors[index], old_length)
!= 0) {
dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
index, buf->bConfigurationValue);
break;
}
}
kfree(buf);
return index != udev->descriptor.bNumConfigurations;
}
/**
* usb_reset_device - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
*
[PATCH] usbcore: port reset for composite devices This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:33:42 -07:00
* WARNING - don't use this routine to reset a composite device
* (one with multiple interfaces owned by separate drivers)!
* Use usb_reset_composite_device() instead.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* Do a port reset, reassign the device's address, and establish its
* former operating configuration. If the reset fails, or the device's
* descriptors change from their values before the reset, or the original
* configuration and altsettings cannot be restored, a flag will be set
* telling khubd to pretend the device has been disconnected and then
* re-connected. All drivers will be unbound, and the device will be
* re-enumerated and probed all over again.
*
* Returns 0 if the reset succeeded, -ENODEV if the device has been
* flagged for logical disconnection, or some other negative error code
* if the reset wasn't even attempted.
*
* The caller must own the device lock. For example, it's safe to use
* this from a driver probe() routine after downloading new firmware.
* For calls that might not occur during probe(), drivers should lock
* the device using usb_lock_device_for_reset().
*/
int usb_reset_device(struct usb_device *udev)
{
struct usb_device *parent_hdev = udev->parent;
struct usb_hub *parent_hub;
struct usb_device_descriptor descriptor = udev->descriptor;
[PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23 10:09:52 -07:00
int i, ret = 0;
int port1 = udev->portnum;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
udev->state);
return -EINVAL;
}
if (!parent_hdev) {
/* this requires hcd-specific logic; see OHCI hc_restart() */
dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__);
return -EISDIR;
}
parent_hub = hdev_to_hub(parent_hdev);
set_bit(port1, parent_hub->busy_bits);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
* Other endpoints will be handled by re-enumeration. */
ep0_reinit(udev);
ret = hub_port_init(parent_hub, udev, port1, i);
if (ret >= 0)
break;
}
clear_bit(port1, parent_hub->busy_bits);
usbcore: khubd and busy-port handling We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11 13:52:39 -07:00
if (!parent_hdev->parent && !parent_hub->busy_bits[0])
usb_enable_root_hub_irq(parent_hdev->bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (ret < 0)
goto re_enumerate;
/* Device might have changed firmware (DFU or similar) */
if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
|| config_descriptors_changed (udev)) {
dev_info(&udev->dev, "device firmware changed\n");
udev->descriptor = descriptor; /* for disconnect() calls */
goto re_enumerate;
}
if (!udev->actconfig)
goto done;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_CONFIGURATION, 0,
udev->actconfig->desc.bConfigurationValue, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (ret < 0) {
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
udev->actconfig->desc.bConfigurationValue, ret);
goto re_enumerate;
}
usb_set_device_state(udev, USB_STATE_CONFIGURED);
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *intf = udev->actconfig->interface[i];
struct usb_interface_descriptor *desc;
/* set_interface resets host side toggle even
* for altsetting zero. the interface may have no driver.
*/
desc = &intf->cur_altsetting->desc;
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
"altsetting %d (error=%d)\n",
desc->bInterfaceNumber,
desc->bAlternateSetting,
ret);
goto re_enumerate;
}
}
done:
return 0;
re_enumerate:
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
EXPORT_SYMBOL(usb_reset_device);
[PATCH] usbcore: port reset for composite devices This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:33:42 -07:00
/**
* usb_reset_composite_device - warn interface drivers and perform a USB port reset
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
* @iface: interface bound to the driver making the request (optional)
*
* Warns all drivers bound to registered interfaces (using their pre_reset
* method), performs the port reset, and then lets the drivers know that
* the reset is over (using their post_reset method).
*
* Return value is the same as for usb_reset_device().
*
* The caller must own the device lock. For example, it's safe to use
* this from a driver probe() routine after downloading new firmware.
* For calls that might not occur during probe(), drivers should lock
* the device using usb_lock_device_for_reset().
*
* The interface locks are acquired during the pre_reset stage and released
* during the post_reset stage. However if iface is not NULL and is
* currently being probed, we assume that the caller already owns its
* lock.
*/
int usb_reset_composite_device(struct usb_device *udev,
struct usb_interface *iface)
{
int ret;
struct usb_host_config *config = udev->actconfig;
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
udev->state);
return -EINVAL;
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
/* Prevent autosuspend during the reset */
usb_autoresume_device(udev, 1);
[PATCH] usbcore: port reset for composite devices This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:33:42 -07:00
if (iface && iface->condition != USB_INTERFACE_BINDING)
iface = NULL;
if (config) {
int i;
struct usb_interface *cintf;
struct usb_driver *drv;
for (i = 0; i < config->desc.bNumInterfaces; ++i) {
cintf = config->interface[i];
if (cintf != iface)
down(&cintf->dev.sem);
if (device_is_registered(&cintf->dev) &&
cintf->dev.driver) {
drv = to_usb_driver(cintf->dev.driver);
if (drv->pre_reset)
(drv->pre_reset)(cintf);
}
}
}
ret = usb_reset_device(udev);
if (config) {
int i;
struct usb_interface *cintf;
struct usb_driver *drv;
for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
cintf = config->interface[i];
if (device_is_registered(&cintf->dev) &&
cintf->dev.driver) {
drv = to_usb_driver(cintf->dev.driver);
if (drv->post_reset)
(drv->post_reset)(cintf);
}
if (cintf != iface)
up(&cintf->dev.sem);
}
}
usbcore: add autosuspend/autoresume infrastructure This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 12:47:02 -07:00
usb_autosuspend_device(udev, 1);
[PATCH] usbcore: port reset for composite devices This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-01 10:33:42 -07:00
return ret;
}
usbcore: rename usb_suspend_device to usb_port_suspend This revised patch (as715b) renames usb_suspend_device to usb_port_suspend, usb_resume_device to usb_port_resume, and finish_device_resume to finish_port_resume. There was no objection to the original version of the patch so this should be okay to apply. The revision was needed only because I have re-arranged the order of the earlier patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 19:07:21 -07:00
EXPORT_SYMBOL(usb_reset_composite_device);
Copy Permalink