kevin/linux
1
Fork 0
Code
188bdddd24
linux/arch/powerpc/platforms/85xx/Kconfig

123 lines
2.6 KiB
Plaintext
Raw Normal View History

[POWERPC] 85xx: rework platform Kconfig * Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 09:24:30 -07:00
menuconfig MPC85xx
bool "Machine Type"
[POWERPC] Convert 85xx platform to unified platform Kconfig Moved 85xx platform Kconfig over to being sourced by the unified arch/powerpc/platforms/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 15:44:07 -07:00
depends on PPC_85xx
[POWERPC] 85xx: rework platform Kconfig * Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 09:24:30 -07:00
select PPC_UDBG_16550
select MPIC
powerpc: pci config cleanup Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-26 10:07:56 -07:00
select PPC_PCI_CHOICE
[POWERPC] 85xx: rework platform Kconfig * Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 09:24:30 -07:00
select FSL_PCI if PCI
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
if MPC85xx
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 23:04:21 -07:00
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
powerpc: Make uImage default build output for MPC8540 ADS When we build for the MPC8540 ADS produce a uImage by default. Updated the defconfig to reflect this as well. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-03-27 22:44:37 -07:00
select DEFAULT_UIMAGE
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 23:04:21 -07:00
help
[PATCH] powerpc: Updated Initial MPC8540 ADS port with OF Flat Dev Updated patch for support for mpc8540_ads in arch/powerpc with a flat OF device tree. This patch does not yet support PCI or I2C. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 15:57:39 -07:00
This option enables support for the MPC 8540 ADS board
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 23:04:21 -07:00
POWERPC: Add support for the mpc8560 eval board This makes the 8560 evaluation board fully supported under arch/powerpc, as the first board with CPM2 SoC peripherals. The brand new devicetree nodes are introduced (intending to be a subset of the QuiccEngine-equipped models, with dts sources placed into the kernel according to the new convention. Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART update), the both TSEC eth ,FCC Eths, and both SCC UARTs are working. The relevant drivers are still capable to drive users in ppc, which was verified with 8272ADS (SCC uart+FCC eth). This is also verified on mpc8540 and actually make it work (PCI stuff working as well) Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 11:31:26 -07:00
config MPC8560_ADS
bool "Freescale MPC8560 ADS"
select DEFAULT_UIMAGE
[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boards Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 16:41:25 -07:00
select CPM2
POWERPC: Add support for the mpc8560 eval board This makes the 8560 evaluation board fully supported under arch/powerpc, as the first board with CPM2 SoC peripherals. The brand new devicetree nodes are introduced (intending to be a subset of the QuiccEngine-equipped models, with dts sources placed into the kernel according to the new convention. Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART update), the both TSEC eth ,FCC Eths, and both SCC UARTs are working. The relevant drivers are still capable to drive users in ppc, which was verified with 8272ADS (SCC uart+FCC eth). This is also verified on mpc8540 and actually make it work (PCI stuff working as well) Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 11:31:26 -07:00
help
This option enables support for the MPC 8560 ADS board
Add 85xx CDS to arch/powerpc This patch adds support for 85xx CDS support to arch/powerpc Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-02 15:42:40 -07:00
config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
[POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line. The Freescale MPC8555CDS and MPC8548CDS reference hardware has a legacy 8259 interrupt controller pair contained within a VIA VT82C686B Southbridge on the main carrier board. The processor complex plugs into the carrier card using a PCI slot which limits the available interrupts to the INTA-INTD PCI interrupts. The output of the 8259 cascade pair is routed through a gate array and connected to the PCI INTA interrupt line. The normal interrupt chaining hook (set_irq_chained_handler) does not allow sharing of the chained interrupt which prevents the use of PCI INTA by PCI devices. This patch allows the 8259 cascade pair to share their interrupt line with PCI devices. NOTE: The addition of the .end routine for the MPIC is not strictly necessary for this patch. It's there so this code will run from within the threaded interrupt context used by the Real Time patch. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-06 16:26:15 -07:00
select PPC_I8259
Add 85xx CDS to arch/powerpc This patch adds support for 85xx CDS support to arch/powerpc Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-02 15:42:40 -07:00
help
This option enables support for the MPC85xx CDS board
[POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards Renamed the MPC8568 MDS platform code to follow other 85xx boards. There isn't anything specific about the 8568 MDS code that wouldn't apply to another 85xx MDS system at this point. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17 15:29:36 -07:00
config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
[POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 16:28:31 -07:00
select DEFAULT_UIMAGE
[POWERPC] mpc85xx_mds: select QUICC_ENGINE Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-05 10:47:38 -07:00
select QUICC_ENGINE
[POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups The MPC85xx MDS board requires some board level tweaks of the PHYs that either the eTSEC (gianfar) or UCC ethernet controllers are connected to. Its possible to build the phylib as a module, however this breaks the board level fix ups because phy_read and phy_write are not available if we build as a module. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in MPC85xx MDS support. This was determined to be the easiest soultion even though it prevents the user from removing PHYLIB support if they decide they don't want it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-03 11:36:19 -07:00
select PHYLIB
[POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 16:28:31 -07:00
help
[POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards Renamed the MPC8568 MDS platform code to follow other 85xx boards. There isn't anything specific about the 8568 MDS code that wouldn't apply to another 85xx MDS system at this point. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17 15:29:36 -07:00
This option enables support for the MPC85xx MDS board
[POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 16:28:31 -07:00
powerpc/85xx: Add support for MPC8536DS Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-01 23:36:15 -07:00
config MPC8536_DS
bool "Freescale MPC8536 DS"
select DEFAULT_UIMAGE
help
This option enables support for the MPC8536 DS board
[POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more generic in prep for other boards based on the same platform. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 07:22:09 -07:00
config MPC85xx_DS
bool "Freescale MPC85xx DS"
[POWERPC] Add basic PCI/PCI Express support for 8544DS board Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-13 03:05:08 -07:00
select PPC_I8259
[POWERPC] 85xx: Add initial MPC8544 DS platform files. This patch provides the basic MPC8544 DS platform code and config. Follow-up patches will add peripherals such as PCI and SATA. Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-20 09:19:10 -07:00
select DEFAULT_UIMAGE
[POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-16 21:55:55 -07:00
select FSL_ULI1575
[POWERPC] 85xx: Add initial MPC8544 DS platform files. This patch provides the basic MPC8544 DS platform code and config. Follow-up patches will add peripherals such as PCI and SATA. Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-20 09:19:10 -07:00
help
[POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more generic in prep for other boards based on the same platform. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 07:22:09 -07:00
This option enables support for the MPC85xx DS (MPC8544 DS) board
[POWERPC] 85xx: Add initial MPC8544 DS platform files. This patch provides the basic MPC8544 DS platform code and config. Follow-up patches will add peripherals such as PCI and SATA. Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-20 09:19:10 -07:00
[POWERPC] 85xx: Emerson KSI8560 base support The KSI8560 is a single compact, mid-, or full-size Advanced Mezzanine Card (AdvancedMC™) based on the Freescale™ Semiconductor MPC8560 PowerQUICC III™ microprocessor. This product will serve in data and signaling applications such as signaling gateways (SGW) and softswitch signaling interface cards. The board has altera maxii CPLD, that is used to obtain and manage board configuration. Also there are two SCC UART serial consoles and FCC ethernet, that is routed to the front panel, while other ethernet controlers (TSEC's) are routed to the backplane. Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-06 08:17:16 -07:00
config KSI8560
bool "Emerson KSI8560"
select DEFAULT_UIMAGE
help
This option enables support for the Emerson KSI8560 board
[POWERPC] 85xx: Port STX GP3 board over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 22:42:44 -07:00
config STX_GP3
bool "Silicon Turnkey Express GP3"
help
This option enables support for the Silicon Turnkey Express GP3
board.
[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boards Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 16:41:25 -07:00
select CPM2
[POWERPC] 85xx: Port STX GP3 board over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 22:42:44 -07:00
select DEFAULT_UIMAGE
[POWERPC] 85xx: Port TQM85xx boards over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 22:53:03 -07:00
config TQM8540
bool "TQ Components TQM8540"
help
This option enables support for the TQ Components TQM8540 board.
select DEFAULT_UIMAGE
select TQM85xx
config TQM8541
bool "TQ Components TQM8541"
help
This option enables support for the TQ Components TQM8541 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
powerpc/85xx: add board support for the TQM8548 modules This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-06 04:50:04 -07:00
config TQM8548
bool "TQ Components TQM8548"
help
This option enables support for the TQ Components TQM8548 board.
select DEFAULT_UIMAGE
select TQM85xx
[POWERPC] 85xx: Port TQM85xx boards over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 22:53:03 -07:00
config TQM8555
bool "TQ Components TQM8555"
help
This option enables support for the TQ Components TQM8555 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
config TQM8560
bool "TQ Components TQM8560"
help
This option enables support for the TQ Components TQM8560 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
[POWERPC] 85xx: Add basic support for Wind River SBC8548 board This adds the basic support for the Wind River SBC8548 board, implemented as powerpc. It closely follows the implementation of the MPC8548CDS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 16:41:27 -07:00
config SBC8548
bool "Wind River SBC8548"
select DEFAULT_UIMAGE
help
This option enables support for the Wind River SBC8548 board
[POWERPC] 85xx: Add support for Wind River SBC8560 in arch/powerpc This adds support for the Wind River SBC8560 board, implemented as powerpc. It closely follows the implementation of the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 16:41:23 -07:00
config SBC8560
bool "Wind River SBC8560"
select DEFAULT_UIMAGE
help
This option enables support for the Wind River SBC8560 board
[POWERPC] 85xx: rework platform Kconfig * Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 09:24:30 -07:00
endif # MPC85xx
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25 23:04:21 -07:00
[POWERPC] 85xx: Port TQM85xx boards over from arch/ppc Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-24 22:53:03 -07:00
config TQM85xx
bool
Copy Permalink