1
linux/sound/firewire/motu/motu-protocol-v1.c

468 lines
13 KiB
C
Raw Permalink Normal View History

ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
// SPDX-License-Identifier: GPL-2.0-only
// motu-protocol-v1.c - a part of driver for MOTU FireWire series
//
// Copyright (c) 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp>
#include "motu.h"
#include <linux/delay.h>
// Status register for MOTU 828 (0x'ffff'f000'0b00).
//
// 0xffff0000: ISOC_COMM_CONTROL_MASK in motu-stream.c.
// 0x00008000: mode of optical input interface.
// 0x00008000: for S/PDIF signal.
// 0x00000000: disabled or for ADAT signal.
// 0x00004000: mode of optical output interface.
// 0x00004000: for S/PDIF signal.
// 0x00000000: disabled or for ADAT signal.
// 0x00003f00: monitor input mode.
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
// 0x00000800: analog-1/2
// 0x00001a00: analog-3/4
// 0x00002c00: analog-5/6
// 0x00003e00: analog-7/8
// 0x00000000: analog-1
// 0x00000900: analog-2
// 0x00001200: analog-3
// 0x00001b00: analog-4
// 0x00002400: analog-5
// 0x00002d00: analog-6
// 0x00003600: analog-7
// 0x00003f00: analog-8
// 0x00000080: enable stream input.
// 0x00000040: disable monitor input.
// 0x00000008: enable main out.
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
// 0x00000004: rate of sampling clock.
// 0x00000004: 48.0 kHz
// 0x00000000: 44.1 kHz
// 0x00000023: source of sampling clock.
// 0x00000003: source packet header (SPH)
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
// 0x00000002: S/PDIF on optical/coaxial interface.
// 0x00000021: ADAT on optical interface
// 0x00000001: ADAT on Dsub 9pin
// 0x00000000: internal
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
#define CLK_828_STATUS_OFFSET 0x0b00
#define CLK_828_STATUS_MASK 0x0000ffff
#define CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF 0x00008000
#define CLK_828_STATUS_FLAG_OPT_OUT_IFACE_IS_SPDIF 0x00004000
#define CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES 0x00000080
#define CLK_828_STATUS_FLAG_ENABLE_OUTPUT 0x00000008
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
#define CLK_828_STATUS_FLAG_RATE_48000 0x00000004
#define CLK_828_STATUS_MASK_SRC 0x00000023
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000021
#define CLK_828_STATUS_FLAG_SRC_SPH 0x00000003
#define CLK_828_STATUS_FLAG_SRC_SPDIF 0x00000002
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000001
#define CLK_828_STATUS_FLAG_SRC_INTERNAL 0x00000000
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
// Status register for MOTU 896 (0x'ffff'f000'0b14).
//
// 0xf0000000: enable physical and stream input to DAC.
// 0x80000000: disable
// 0x40000000: disable
// 0x20000000: enable (prior to the other bits)
// 0x10000000: disable
// 0x00000000: disable
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
// 0x08000000: speed of word clock signal output on BNC interface.
// 0x00000000: force to low rate (44.1/48.0 kHz).
// 0x08000000: follow to system clock.
// 0x04000000: something relevant to clock.
// 0x03000000: enable output.
// 0x02000000: enabled irreversibly once standing unless the device voluntarily disables it.
// 0x01000000: enabled irreversibly once standing unless the device voluntarily disables it.
// 0x00ffff00: monitor input mode.
// 0x00000000: disabled
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
// 0x00004800: analog-1/2
// 0x00005a00: analog-3/4
// 0x00006c00: analog-5/6
// 0x00007e00: analog-7/8
// 0x00104800: AES/EBU-1/2
// 0x00004000: analog-1
// 0x00004900: analog-2
// 0x00005200: analog-3
// 0x00005b00: analog-4
// 0x00006400: analog-5
// 0x00006d00: analog-6
// 0x00007600: analog-7
// 0x00007f00: analog-8
// 0x00104000: AES/EBU-1
// 0x00104900: AES/EBU-2
// 0x00000060: sample rate conversion for AES/EBU input/output.
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
// 0x00000000: None
// 0x00000020: input signal is converted to system rate
// 0x00000040: output is slave to input, ignoring system rate
// 0x00000060: output is double rate than system rate
// 0x00000018: nominal rate of sampling clock.
// 0x00000000: 44.1 kHz
// 0x00000008: 48.0 kHz
// 0x00000010: 88.2 kHz
// 0x00000018: 96.0 kHz
// 0x00000007: source of sampling clock.
// 0x00000000: internal
// 0x00000001: ADAT on optical interface
// 0x00000002: AES/EBU on XLR
// 0x00000003: source packet header (SPH)
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
// 0x00000004: word clock on BNC
// 0x00000005: ADAT on Dsub 9pin
#define CLK_896_STATUS_OFFSET 0x0b14
#define CLK_896_STATUS_FLAG_FETCH_ENABLE 0x20000000
#define CLK_896_STATUS_FLAG_OUTPUT_ON 0x03000000
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
#define CLK_896_STATUS_MASK_SRC 0x00000007
#define CLK_896_STATUS_FLAG_SRC_INTERNAL 0x00000000
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000001
#define CLK_896_STATUS_FLAG_SRC_AESEBU 0x00000002
#define CLK_896_STATUS_FLAG_SRC_SPH 0x00000003
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
#define CLK_896_STATUS_FLAG_SRC_WORD 0x00000004
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000005
#define CLK_896_STATUS_MASK_RATE 0x00000018
#define CLK_896_STATUS_FLAG_RATE_44100 0x00000000
#define CLK_896_STATUS_FLAG_RATE_48000 0x00000008
#define CLK_896_STATUS_FLAG_RATE_88200 0x00000010
#define CLK_896_STATUS_FLAG_RATE_96000 0x00000018
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
static void parse_clock_rate_828(u32 data, unsigned int *rate)
{
if (data & CLK_828_STATUS_FLAG_RATE_48000)
*rate = 48000;
else
*rate = 44100;
}
static int get_clock_rate_828(struct snd_motu *motu, unsigned int *rate)
{
__be32 reg;
int err;
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
parse_clock_rate_828(be32_to_cpu(reg), rate);
return 0;
}
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
static int parse_clock_rate_896(u32 data, unsigned int *rate)
{
switch (data & CLK_896_STATUS_MASK_RATE) {
case CLK_896_STATUS_FLAG_RATE_44100:
*rate = 44100;
break;
case CLK_896_STATUS_FLAG_RATE_48000:
*rate = 48000;
break;
case CLK_896_STATUS_FLAG_RATE_88200:
*rate = 88200;
break;
case CLK_896_STATUS_FLAG_RATE_96000:
*rate = 96000;
break;
default:
return -ENXIO;
}
return 0;
}
static int get_clock_rate_896(struct snd_motu *motu, unsigned int *rate)
{
__be32 reg;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
return parse_clock_rate_896(be32_to_cpu(reg), rate);
}
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
int snd_motu_protocol_v1_get_clock_rate(struct snd_motu *motu, unsigned int *rate)
{
if (motu->spec == &snd_motu_spec_828)
return get_clock_rate_828(motu, rate);
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
else if (motu->spec == &snd_motu_spec_896)
return get_clock_rate_896(motu, rate);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
else
return -ENXIO;
}
static int set_clock_rate_828(struct snd_motu *motu, unsigned int rate)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
data &= ~CLK_828_STATUS_FLAG_RATE_48000;
if (rate == 48000)
data |= CLK_828_STATUS_FLAG_RATE_48000;
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
}
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
static int set_clock_rate_896(struct snd_motu *motu, unsigned int rate)
{
unsigned int flag;
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
switch (rate) {
case 44100:
flag = CLK_896_STATUS_FLAG_RATE_44100;
break;
case 48000:
flag = CLK_896_STATUS_FLAG_RATE_48000;
break;
case 88200:
flag = CLK_896_STATUS_FLAG_RATE_88200;
break;
case 96000:
flag = CLK_896_STATUS_FLAG_RATE_96000;
break;
default:
return -EINVAL;
}
data &= ~CLK_896_STATUS_MASK_RATE;
data |= flag;
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
}
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
int snd_motu_protocol_v1_set_clock_rate(struct snd_motu *motu, unsigned int rate)
{
if (motu->spec == &snd_motu_spec_828)
return set_clock_rate_828(motu, rate);
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
else if (motu->spec == &snd_motu_spec_896)
return set_clock_rate_896(motu, rate);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
else
return -ENXIO;
}
static int get_clock_source_828(struct snd_motu *motu, enum snd_motu_clock_source *src)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
switch (data & CLK_828_STATUS_MASK_SRC) {
case CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
break;
case CLK_828_STATUS_FLAG_SRC_SPH:
*src = SND_MOTU_CLOCK_SOURCE_SPH;
break;
case CLK_828_STATUS_FLAG_SRC_SPDIF:
{
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
if (data & CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF)
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_COAX;
else
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_OPT;
break;
}
case CLK_828_STATUS_FLAG_SRC_ADAT_ON_DSUB:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
break;
case CLK_828_STATUS_FLAG_SRC_INTERNAL:
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
break;
default:
return -ENXIO;
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
}
return 0;
}
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
static int get_clock_source_896(struct snd_motu *motu, enum snd_motu_clock_source *src)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
switch (data & CLK_896_STATUS_MASK_SRC) {
case CLK_896_STATUS_FLAG_SRC_INTERNAL:
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
break;
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
break;
case CLK_896_STATUS_FLAG_SRC_AESEBU:
*src = SND_MOTU_CLOCK_SOURCE_AESEBU_ON_XLR;
break;
case CLK_896_STATUS_FLAG_SRC_SPH:
*src = SND_MOTU_CLOCK_SOURCE_SPH;
break;
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
case CLK_896_STATUS_FLAG_SRC_WORD:
*src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC;
break;
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
break;
default:
return -ENXIO;
}
return 0;
}
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
int snd_motu_protocol_v1_get_clock_source(struct snd_motu *motu, enum snd_motu_clock_source *src)
{
if (motu->spec == &snd_motu_spec_828)
return get_clock_source_828(motu, src);
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
else if (motu->spec == &snd_motu_spec_896)
return get_clock_source_896(motu, src);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
else
return -ENXIO;
}
static int switch_fetching_mode_828(struct snd_motu *motu, bool enable)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
data &= ~(CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES | CLK_828_STATUS_FLAG_ENABLE_OUTPUT);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
if (enable) {
// This transaction should be initiated after the device receives batch of packets
// since the device voluntarily mutes outputs. As a workaround, yield processor over
// 100 msec.
msleep(100);
data |= CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES | CLK_828_STATUS_FLAG_ENABLE_OUTPUT;
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
}
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
}
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
static int switch_fetching_mode_896(struct snd_motu *motu, bool enable)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
data &= ~CLK_896_STATUS_FLAG_FETCH_ENABLE;
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
if (enable)
data |= CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_OUTPUT_ON;
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
}
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
int snd_motu_protocol_v1_switch_fetching_mode(struct snd_motu *motu, bool enable)
{
if (motu->spec == &snd_motu_spec_828)
return switch_fetching_mode_828(motu, enable);
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
else if (motu->spec == &snd_motu_spec_896)
return switch_fetching_mode_896(motu, enable);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
else
return -ENXIO;
}
static int detect_packet_formats_828(struct snd_motu *motu)
{
__be32 reg;
u32 data;
int err;
motu->tx_packet_formats.pcm_byte_offset = 4;
motu->tx_packet_formats.msg_chunks = 2;
motu->rx_packet_formats.pcm_byte_offset = 4;
motu->rx_packet_formats.msg_chunks = 0;
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
// The number of chunks is just reduced when SPDIF is activated.
if (!(data & CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF))
motu->tx_packet_formats.pcm_chunks[0] += 8;
if (!(data & CLK_828_STATUS_FLAG_OPT_OUT_IFACE_IS_SPDIF))
motu->rx_packet_formats.pcm_chunks[0] += 8;
return 0;
}
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
static int detect_packet_formats_896(struct snd_motu *motu)
{
// 24bit PCM frames follow to source packet header without message chunk.
motu->tx_packet_formats.pcm_byte_offset = 4;
motu->rx_packet_formats.pcm_byte_offset = 4;
// No message chunk in data block.
motu->tx_packet_formats.msg_chunks = 0;
motu->rx_packet_formats.msg_chunks = 0;
// Always enable optical interface for ADAT signal since the device have no registers
// to refer to current configuration.
motu->tx_packet_formats.pcm_chunks[0] += 8;
motu->tx_packet_formats.pcm_chunks[1] += 8;
motu->rx_packet_formats.pcm_chunks[0] += 8;
motu->rx_packet_formats.pcm_chunks[1] += 8;
return 0;
}
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
{
memcpy(motu->tx_packet_formats.pcm_chunks, motu->spec->tx_fixed_pcm_chunks,
sizeof(motu->tx_packet_formats.pcm_chunks));
memcpy(motu->rx_packet_formats.pcm_chunks, motu->spec->rx_fixed_pcm_chunks,
sizeof(motu->rx_packet_formats.pcm_chunks));
if (motu->spec == &snd_motu_spec_828)
return detect_packet_formats_828(motu);
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
else if (motu->spec == &snd_motu_spec_896)
return detect_packet_formats_896(motu);
ALSA: firewire-motu: add support for MOTU 828 MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:46 -07:00
else
return 0;
}
const struct snd_motu_spec snd_motu_spec_828 = {
.name = "828",
.protocol_version = SND_MOTU_PROTOCOL_V1,
.tx_fixed_pcm_chunks = {10, 0, 0},
.rx_fixed_pcm_chunks = {10, 0, 0},
};
ALSA: firewire-motu: add support for MOTU 896 MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 01:28:47 -07:00
const struct snd_motu_spec snd_motu_spec_896 = {
.name = "896",
.tx_fixed_pcm_chunks = {10, 10, 0},
.rx_fixed_pcm_chunks = {10, 10, 0},
};