kevin/linux
1
Fork 0
Code
master
linux/kernel/sched/build_utility.c

110 lines
2.3 KiB
C
Raw Permalink Normal View History

sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there Collect all utility functionality source code files into a single kernel/sched/build_utility.c file, via #include-ing the .c files: kernel/sched/clock.c kernel/sched/completion.c kernel/sched/loadavg.c kernel/sched/swait.c kernel/sched/wait_bit.c kernel/sched/wait.c CONFIG_CPU_FREQ: kernel/sched/cpufreq.c CONFIG_CPU_FREQ_GOV_SCHEDUTIL: kernel/sched/cpufreq_schedutil.c CONFIG_CGROUP_CPUACCT: kernel/sched/cpuacct.c CONFIG_SCHED_DEBUG: kernel/sched/debug.c CONFIG_SCHEDSTATS: kernel/sched/stats.c CONFIG_SMP: kernel/sched/cpupri.c kernel/sched/stop_task.c kernel/sched/topology.c CONFIG_SCHED_CORE: kernel/sched/core_sched.c CONFIG_PSI: kernel/sched/psi.c CONFIG_MEMBARRIER: kernel/sched/membarrier.c CONFIG_CPU_ISOLATION: kernel/sched/isolation.c CONFIG_SCHED_AUTOGROUP: kernel/sched/autogroup.c The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into a single build unit. The build time of build_utility.c also roughly matches the build time of core.c and fair.c - allowing better load-balancing of scheduler-only rebuilds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 05:23:24 -07:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* These are various utility functions of the scheduler,
* built in a single compilation unit for build efficiency reasons.
*
* ( Incidentally, the size of the compilation unit is roughly
* comparable to core.c, fair.c, smp.c and policy.c, the other
* big compilation units. This helps balance build time, while
* coalescing source files to amortize header inclusion
* cost. )
*/
sched/headers: Reorganize, clean up and optimize kernel/sched/build_utility.c dependencies Use all generic headers from kernel/sched/sched.h that are required for it to build. Sort the sections alphabetically. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2021-07-19 03:43:51 -07:00
#include <linux/sched/clock.h>
#include <linux/sched/cputime.h>
#include <linux/sched/debug.h>
#include <linux/sched/isolation.h>
#include <linux/sched/loadavg.h>
sched: Fix missing prototype warnings A W=1 build emits more than a dozen missing prototype warnings related to scheduler and scheduler specific includes. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220413133024.249118058@linutronix.de
2022-04-13 06:31:02 -07:00
#include <linux/sched/nohz.h>
sched/headers: Reorganize, clean up and optimize kernel/sched/build_utility.c dependencies Use all generic headers from kernel/sched/sched.h that are required for it to build. Sort the sections alphabetically. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2021-07-19 03:43:51 -07:00
#include <linux/sched/mm.h>
#include <linux/sched/rseq_api.h>
#include <linux/sched/task_stack.h>
#include <linux/cpufreq.h>
#include <linux/cpumask_api.h>
#include <linux/cpuset.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/energy_model.h>
#include <linux/hashtable_api.h>
#include <linux/irq.h>
#include <linux/kobject_api.h>
#include <linux/membarrier.h>
#include <linux/mempolicy.h>
#include <linux/nmi.h>
#include <linux/nospec.h>
#include <linux/proc_fs.h>
#include <linux/psi.h>
#include <linux/ptrace_api.h>
#include <linux/sched_clock.h>
#include <linux/security.h>
#include <linux/spinlock_api.h>
#include <linux/swait_api.h>
#include <linux/timex.h>
#include <linux/utsname.h>
#include <linux/wait_api.h>
#include <linux/workqueue_api.h>
#include <uapi/linux/prctl.h>
#include <uapi/linux/sched/types.h>
sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there Collect all utility functionality source code files into a single kernel/sched/build_utility.c file, via #include-ing the .c files: kernel/sched/clock.c kernel/sched/completion.c kernel/sched/loadavg.c kernel/sched/swait.c kernel/sched/wait_bit.c kernel/sched/wait.c CONFIG_CPU_FREQ: kernel/sched/cpufreq.c CONFIG_CPU_FREQ_GOV_SCHEDUTIL: kernel/sched/cpufreq_schedutil.c CONFIG_CGROUP_CPUACCT: kernel/sched/cpuacct.c CONFIG_SCHED_DEBUG: kernel/sched/debug.c CONFIG_SCHEDSTATS: kernel/sched/stats.c CONFIG_SMP: kernel/sched/cpupri.c kernel/sched/stop_task.c kernel/sched/topology.c CONFIG_SCHED_CORE: kernel/sched/core_sched.c CONFIG_PSI: kernel/sched/psi.c CONFIG_MEMBARRIER: kernel/sched/membarrier.c CONFIG_CPU_ISOLATION: kernel/sched/isolation.c CONFIG_SCHED_AUTOGROUP: kernel/sched/autogroup.c The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into a single build unit. The build time of build_utility.c also roughly matches the build time of core.c and fair.c - allowing better load-balancing of scheduler-only rebuilds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 05:23:24 -07:00
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies Remove all headers, except the ones required to make this header build standalone. Also include stats.h in sched.h explicitly - dependencies already require this. Summary of the build speedup gained through the last ~15 scheduler build & header dependency patches: Cumulative scheduler (kernel/sched/) build time speedup on a Linux distribution's config, which enables all scheduler features, compared to the vanilla kernel: _____________________________________________________________________________ | | Vanilla kernel (v5.13-rc7): |_____________________________________________________________________________ | | Performance counter stats for 'make -j96 kernel/sched/' (3 runs): | | 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% ) | 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% ) | 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% ) | | 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% ) |_____________________________________________________________________________ | | Patched kernel: |_____________________________________________________________________________ | | Performance counter stats for 'make -j96 kernel/sched/' (3 runs): | | 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% ) | 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% ) | 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% ) | | 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% ) |_____________________________________________________________________________ Summary: - CPU time used to build the scheduler dropped by -60.9%, a reduction from 22.1 clock-seconds to 8.7 clock-seconds. - Wall-clock time to build the scheduler dropped by -3.9%, a reduction from 2.95 seconds to 2.84 seconds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 06:51:58 -07:00
#include <asm/switch_to.h>
sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there Collect all utility functionality source code files into a single kernel/sched/build_utility.c file, via #include-ing the .c files: kernel/sched/clock.c kernel/sched/completion.c kernel/sched/loadavg.c kernel/sched/swait.c kernel/sched/wait_bit.c kernel/sched/wait.c CONFIG_CPU_FREQ: kernel/sched/cpufreq.c CONFIG_CPU_FREQ_GOV_SCHEDUTIL: kernel/sched/cpufreq_schedutil.c CONFIG_CGROUP_CPUACCT: kernel/sched/cpuacct.c CONFIG_SCHED_DEBUG: kernel/sched/debug.c CONFIG_SCHEDSTATS: kernel/sched/stats.c CONFIG_SMP: kernel/sched/cpupri.c kernel/sched/stop_task.c kernel/sched/topology.c CONFIG_SCHED_CORE: kernel/sched/core_sched.c CONFIG_PSI: kernel/sched/psi.c CONFIG_MEMBARRIER: kernel/sched/membarrier.c CONFIG_CPU_ISOLATION: kernel/sched/isolation.c CONFIG_SCHED_AUTOGROUP: kernel/sched/autogroup.c The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into a single build unit. The build time of build_utility.c also roughly matches the build time of core.c and fair.c - allowing better load-balancing of scheduler-only rebuilds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 05:23:24 -07:00
#include "sched.h"
#include "sched-pelt.h"
sched/headers: Standardize kernel/sched/sched.h header dependencies kernel/sched/sched.h is a weird mix of ad-hoc headers included in the middle of the header. Two of them rely on being included in the middle of kernel/sched/sched.h, due to definitions they require: - "stat.h" needs the rq definitions. - "autogroup.h" needs the task_group definition. Move the inclusion of these two files out of kernel/sched/sched.h, and include them in all files that require them. Move of the rest of the header dependencies to the top of the kernel/sched/sched.h file. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-13 00:19:43 -07:00
#include "stats.h"
#include "autogroup.h"
sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there Collect all utility functionality source code files into a single kernel/sched/build_utility.c file, via #include-ing the .c files: kernel/sched/clock.c kernel/sched/completion.c kernel/sched/loadavg.c kernel/sched/swait.c kernel/sched/wait_bit.c kernel/sched/wait.c CONFIG_CPU_FREQ: kernel/sched/cpufreq.c CONFIG_CPU_FREQ_GOV_SCHEDUTIL: kernel/sched/cpufreq_schedutil.c CONFIG_CGROUP_CPUACCT: kernel/sched/cpuacct.c CONFIG_SCHED_DEBUG: kernel/sched/debug.c CONFIG_SCHEDSTATS: kernel/sched/stats.c CONFIG_SMP: kernel/sched/cpupri.c kernel/sched/stop_task.c kernel/sched/topology.c CONFIG_SCHED_CORE: kernel/sched/core_sched.c CONFIG_PSI: kernel/sched/psi.c CONFIG_MEMBARRIER: kernel/sched/membarrier.c CONFIG_CPU_ISOLATION: kernel/sched/isolation.c CONFIG_SCHED_AUTOGROUP: kernel/sched/autogroup.c The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into a single build unit. The build time of build_utility.c also roughly matches the build time of core.c and fair.c - allowing better load-balancing of scheduler-only rebuilds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 05:23:24 -07:00
#include "clock.c"
#ifdef CONFIG_CGROUP_CPUACCT
# include "cpuacct.c"
#endif
#ifdef CONFIG_CPU_FREQ
# include "cpufreq.c"
#endif
#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
# include "cpufreq_schedutil.c"
#endif
#ifdef CONFIG_SCHED_DEBUG
# include "debug.c"
#endif
#ifdef CONFIG_SCHEDSTATS
# include "stats.c"
#endif
#include "loadavg.c"
#include "completion.c"
#include "swait.c"
#include "wait_bit.c"
#include "wait.c"
#ifdef CONFIG_SMP
# include "cpupri.c"
# include "stop_task.c"
# include "topology.c"
#endif
#ifdef CONFIG_SCHED_CORE
# include "core_sched.c"
#endif
#ifdef CONFIG_PSI
# include "psi.c"
#endif
#ifdef CONFIG_MEMBARRIER
# include "membarrier.c"
#endif
#ifdef CONFIG_CPU_ISOLATION
# include "isolation.c"
#endif
#ifdef CONFIG_SCHED_AUTOGROUP
# include "autogroup.c"
#endif
Copy Permalink