1
linux/drivers/usb/phy/phy-isp1301.c

159 lines
3.7 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* NXP ISP1301 USB transceiver driver
*
* Copyright (C) 2012 Roland Stigge
*
* Author: Roland Stigge <stigge@antcom.de>
*/
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/i2c.h>
#include <linux/usb/phy.h>
#include <linux/usb/isp1301.h>
#define DRV_NAME "isp1301"
struct isp1301 {
struct usb_phy phy;
struct mutex mutex;
struct i2c_client *client;
};
#define phy_to_isp(p) (container_of((p), struct isp1301, phy))
static const struct i2c_device_id isp1301_id[] = {
{ "isp1301", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, isp1301_id);
static const struct of_device_id isp1301_of_match[] = {
{.compatible = "nxp,isp1301" },
{ },
};
MODULE_DEVICE_TABLE(of, isp1301_of_match);
static struct i2c_client *isp1301_i2c_client;
static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
{
return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
}
static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
{
return __isp1301_write(isp, reg, value, 0);
}
static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
{
return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
}
static int isp1301_phy_init(struct usb_phy *phy)
{
struct isp1301 *isp = phy_to_isp(phy);
/* Disable transparent UART mode first */
isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
| MC2_SPD_SUSP_CTRL));
isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
| OTG1_DP_PULLDOWN));
isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
| OTG1_DP_PULLUP));
/* mask all interrupts */
isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
return 0;
}
static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
{
struct isp1301 *isp = phy_to_isp(phy);
if (on)
isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
else
isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
return 0;
}
static int isp1301_probe(struct i2c_client *client)
{
struct isp1301 *isp;
struct usb_phy *phy;
isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL);
if (!isp)
return -ENOMEM;
isp->client = client;
mutex_init(&isp->mutex);
phy = &isp->phy;
phy->dev = &client->dev;
phy->label = DRV_NAME;
phy->init = isp1301_phy_init;
phy->set_vbus = isp1301_phy_set_vbus;
phy->type = USB_PHY_TYPE_USB2;
i2c_set_clientdata(client, isp);
usb_add_phy_dev(phy);
isp1301_i2c_client = client;
return 0;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 01:02:30 -07:00
static void isp1301_remove(struct i2c_client *client)
{
struct isp1301 *isp = i2c_get_clientdata(client);
usb_remove_phy(&isp->phy);
isp1301_i2c_client = NULL;
}
static struct i2c_driver isp1301_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = isp1301_of_match,
},
.probe = isp1301_probe,
.remove = isp1301_remove,
.id_table = isp1301_id,
};
module_i2c_driver(isp1301_driver);
struct i2c_client *isp1301_get_client(struct device_node *node)
{
struct i2c_client *client;
/* reference of ISP1301 I2C node via DT */
client = of_find_i2c_device_by_node(node);
if (client)
return client;
/* non-DT: only one ISP1301 chip supported */
return isp1301_i2c_client;
}
EXPORT_SYMBOL_GPL(isp1301_get_client);
MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
MODULE_LICENSE("GPL");