1
linux/drivers/iio/humidity/hid-sensor-humidity.c

298 lines
8.0 KiB
C
Raw Permalink Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 16:57:24 -07:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* HID Sensors Driver
* Copyright (c) 2017, Intel Corporation.
*/
#include <linux/device.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "hid-sensor-trigger.h"
struct hid_humidity_state {
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info humidity_attr;
struct {
s32 humidity_data;
u64 timestamp __aligned(8);
} scan;
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
int value_offset;
};
static const u32 humidity_sensitivity_addresses[] = {
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
};
/* Channel definitions */
static const struct iio_chan_spec humidity_channels[] = {
{
.type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
},
IIO_CHAN_SOFT_TIMESTAMP(1)
};
/* Adjust channel real bits based on report descriptor */
static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
int channel, int size)
{
channels[channel].scan_type.sign = 's';
/* Real storage bits will change based on the report desc. */
channels[channel].scan_type.realbits = size * 8;
/* Maximum size of a sample to capture is s32 */
channels[channel].scan_type.storagebits = sizeof(s32) * 8;
}
static int humidity_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type != IIO_HUMIDITYRELATIVE)
return -EINVAL;
hid_sensor_power_state(&humid_st->common_attributes, true);
*val = sensor_hub_input_attr_get_raw_value(
humid_st->common_attributes.hsdev,
HID_USAGE_SENSOR_HUMIDITY,
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
humid_st->humidity_attr.report_id,
SENSOR_HUB_SYNC,
humid_st->humidity_attr.logical_minimum < 0);
hid_sensor_power_state(&humid_st->common_attributes, false);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = humid_st->scale_pre_decml;
*val2 = humid_st->scale_post_decml;
return humid_st->scale_precision;
case IIO_CHAN_INFO_OFFSET:
*val = humid_st->value_offset;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
return hid_sensor_read_samp_freq_value(
&humid_st->common_attributes, val, val2);
case IIO_CHAN_INFO_HYSTERESIS:
return hid_sensor_read_raw_hyst_value(
&humid_st->common_attributes, val, val2);
default:
return -EINVAL;
}
}
static int humidity_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
return hid_sensor_write_samp_freq_value(
&humid_st->common_attributes, val, val2);
case IIO_CHAN_INFO_HYSTERESIS:
return hid_sensor_write_raw_hyst_value(
&humid_st->common_attributes, val, val2);
default:
return -EINVAL;
}
}
static const struct iio_info humidity_info = {
.read_raw = &humidity_read_raw,
.write_raw = &humidity_write_raw,
};
/* Callback handler to send event after all samples are received and captured */
static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
unsigned int usage_id, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
if (atomic_read(&humid_st->common_attributes.data_ready))
iio_push_to_buffers_with_timestamp(indio_dev, &humid_st->scan,
iio_get_time_ns(indio_dev));
return 0;
}
/* Capture samples in local storage */
static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
unsigned int usage_id, size_t raw_len,
char *raw_data, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (usage_id) {
case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY:
humid_st->scan.humidity_data = *(s32 *)raw_data;
return 0;
default:
return -EINVAL;
}
}
/* Parse report which is specific to an usage id */
static int humidity_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
struct iio_chan_spec *channels,
unsigned int usage_id,
struct hid_humidity_state *st)
{
int ret;
ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
usage_id,
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
&st->humidity_attr);
if (ret < 0)
return ret;
humidity_adjust_channel_bit_mask(channels, 0, st->humidity_attr.size);
st->scale_precision = hid_sensor_format_scale(
HID_USAGE_SENSOR_HUMIDITY,
&st->humidity_attr,
&st->scale_pre_decml,
&st->scale_post_decml);
return ret;
}
static struct hid_sensor_hub_callbacks humidity_callbacks = {
.send_event = &humidity_proc_event,
.capture_sample = &humidity_capture_sample,
};
/* Function to initialize the processing for usage id */
static int hid_humidity_probe(struct platform_device *pdev)
{
static const char *name = "humidity";
struct iio_dev *indio_dev;
struct hid_humidity_state *humid_st;
struct iio_chan_spec *humid_chans;
struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
int ret;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*humid_st));
if (!indio_dev)
return -ENOMEM;
humid_st = iio_priv(indio_dev);
humid_st->common_attributes.hsdev = hsdev;
humid_st->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev,
HID_USAGE_SENSOR_HUMIDITY,
&humid_st->common_attributes,
humidity_sensitivity_addresses,
ARRAY_SIZE(humidity_sensitivity_addresses));
if (ret)
return ret;
humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
sizeof(humidity_channels), GFP_KERNEL);
if (!humid_chans)
return -ENOMEM;
ret = humidity_parse_report(pdev, hsdev, humid_chans,
HID_USAGE_SENSOR_HUMIDITY, humid_st);
if (ret)
return ret;
indio_dev->channels = humid_chans;
indio_dev->num_channels = ARRAY_SIZE(humidity_channels);
indio_dev->info = &humidity_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
atomic_set(&humid_st->common_attributes.data_ready, 0);
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-23 21:34:18 -07:00
ret = hid_sensor_setup_trigger(indio_dev, name,
&humid_st->common_attributes);
if (ret)
return ret;
platform_set_drvdata(pdev, indio_dev);
humidity_callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
&humidity_callbacks);
if (ret)
goto error_remove_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_remove_callback;
return ret;
error_remove_callback:
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
error_remove_trigger:
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-23 21:34:18 -07:00
hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
return ret;
}
/* Function to deinitialize the processing for usage id */
static void hid_humidity_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-23 21:34:18 -07:00
hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes);
}
static const struct platform_device_id hid_humidity_ids[] = {
{
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200032",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_humidity_ids);
static struct platform_driver hid_humidity_platform_driver = {
.id_table = hid_humidity_ids,
.driver = {
.name = KBUILD_MODNAME,
.pm = &hid_sensor_pm_ops,
},
.probe = hid_humidity_probe,
.remove_new = hid_humidity_remove,
};
module_platform_driver(hid_humidity_platform_driver);
MODULE_DESCRIPTION("HID Environmental humidity sensor");
MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(IIO_HID);