kevin/linux
1
Fork 0
Code
master
linux/block/blk-rq-qos.h

180 lines
4.6 KiB
C
Raw Permalink Normal View History

block: add SPDX tags to block layer files missing licensing information Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 11:42:43 -07:00
/* SPDX-License-Identifier: GPL-2.0 */
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
#ifndef RQ_QOS_H
#define RQ_QOS_H
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/blk_types.h>
#include <linux/atomic.h>
#include <linux/wait.h>
block: fix race between adding/removing rq qos and normal IO Yi reported several kernel panics on: [16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... [16687.163549] pc : __rq_qos_track+0x38/0x60 or [ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [ 997.850347] pc : __rq_qos_done+0x2c/0x50 Turns out it is caused by race between adding rq qos(wbt) and normal IO because rq_qos_add can be run when IO is being submitted, fix this issue by freezing queue before adding/deleting rq qos to queue. rq_qos_exit() needn't to freeze queue because it is called after queue has been frozen. iolatency calls rq_qos_add() during allocating queue, so freezing won't add delay because queue usage refcount works at atomic mode at that time. iocost calls rq_qos_add() when writing cgroup attribute file, that is fine to freeze queue at that time since we usually freeze queue when storing to queue sysfs attribute, meantime iocost only exists on the root cgroup. wbt_init calls it in blk_register_queue() and queue sysfs attribute store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ), the following patch will speedup the queue freezing in wbt_init. Reported-by: Yi Zhang <yi.zhang@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Yi Zhang <yi.zhang@redhat.com> Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-08 18:58:21 -07:00
#include <linux/blk-mq.h>
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
blk-mq-debugfs: support rq_qos blk-mq-debugfs has been proved as very helpful for debug some tough issues, such as IO hang. We have seen blk-wbt related IO hang several times, even inside Red Hat BZ, there is such report not sovled yet, so this patch adds support debugfs on rq_qos. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 18:46:00 -07:00
#include "blk-mq-debugfs.h"
struct blk_mq_debugfs_attr;
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
enum rq_qos_id {
RQ_QOS_WBT,
blkcg: s/RQ_QOS_CGROUP/RQ_QOS_LATENCY/ io.weight is gonna be another rq_qos cgroup mechanism. Let's rename RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in preparation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:56 -07:00
RQ_QOS_LATENCY,
blkcg: implement blk-iocost This patchset implements IO cost model based work-conserving proportional controller. While io.latency provides the capability to comprehensively prioritize and protect IOs depending on the cgroups, its protection is binary - the lowest latency target cgroup which is suffering is protected at the cost of all others. In many use cases including stacking multiple workload containers in a single system, it's necessary to distribute IO capacity with better granularity. One challenge of controlling IO resources is the lack of trivially observable cost metric. The most common metrics - bandwidth and iops - can be off by orders of magnitude depending on the device type and IO pattern. However, the cost isn't a complete mystery. Given several key attributes, we can make fairly reliable predictions on how expensive a given stream of IOs would be, at least compared to other IO patterns. The function which determines the cost of a given IO is the IO cost model for the device. This controller distributes IO capacity based on the costs estimated by such model. The more accurate the cost model the better but the controller adapts based on IO completion latency and as long as the relative costs across differents IO patterns are consistent and sensible, it'll adapt to the actual performance of the device. Currently, the only implemented cost model is a simple linear one with a few sets of default parameters for different classes of device. This covers most common devices reasonably well. All the infrastructure to tune and add different cost models is already in place and a later patch will also allow using bpf progs for cost models. Please see the top comment in blk-iocost.c and documentation for more details. v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix for a divide-by-zero bug in current_hweight() triggered by zero inuse_sum. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:58 -07:00
RQ_QOS_COST,
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
};
struct rq_wait {
wait_queue_head_t wait;
atomic_t inflight;
};
struct rq_qos {
blk-rq-qos: constify rq_qos_ops These op vectors are constant, so mark them const. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 08:03:55 -07:00
const struct rq_qos_ops *ops;
blk-rq-qos: store a gendisk instead of request_queue in struct rq_qos This is what about half of the users already want, and it's only going to grow more. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 08:03:56 -07:00
struct gendisk *disk;
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
enum rq_qos_id id;
struct rq_qos *next;
blk-mq-debugfs: support rq_qos blk-mq-debugfs has been proved as very helpful for debug some tough issues, such as IO hang. We have seen blk-wbt related IO hang several times, even inside Red Hat BZ, there is such report not sovled yet, so this patch adds support debugfs on rq_qos. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 18:46:00 -07:00
#ifdef CONFIG_BLK_DEBUG_FS
struct dentry *debugfs_dir;
#endif
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
};
struct rq_qos_ops {
block: remove the unused lock argument to rq_qos_throttle Unused now that the legacy request path is gone. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14 09:02:09 -07:00
void (*throttle)(struct rq_qos *, struct bio *);
block: remove external dependency on wbt_flags We don't really need to save this stuff in the core block code, we can just pass the bio back into the helpers later on to derive the same flags and update the rq->wbt_flags appropriately. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:14:59 -07:00
void (*track)(struct rq_qos *, struct request *, struct bio *);
block/rq_qos: add rq_qos_merge() Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:54 -07:00
void (*merge)(struct rq_qos *, struct request *, struct bio *);
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
void (*issue)(struct rq_qos *, struct request *);
void (*requeue)(struct rq_qos *, struct request *);
void (*done)(struct rq_qos *, struct request *);
rq-qos: introduce dio_bio callback wbt cares only about request completion time, but controllers may need information that is on the bio itself, so add a done_bio callback for rq-qos so things like blk-iolatency can use it to have the bio when it completes. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:15:00 -07:00
void (*done_bio)(struct rq_qos *, struct bio *);
block: remove external dependency on wbt_flags We don't really need to save this stuff in the core block code, we can just pass the bio back into the helpers later on to derive the same flags and update the rq->wbt_flags appropriately. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:14:59 -07:00
void (*cleanup)(struct rq_qos *, struct bio *);
block/rq_qos: implement rq_qos_ops->queue_depth_changed() wbt already gets queue depth changed notification through wbt_set_queue_depth(). Generalize it into rq_qos_ops->queue_depth_changed() so that other rq_qos policies can easily hook into the events too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:55 -07:00
void (*queue_depth_changed)(struct rq_qos *);
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
void (*exit)(struct rq_qos *);
blk-mq-debugfs: support rq_qos blk-mq-debugfs has been proved as very helpful for debug some tough issues, such as IO hang. We have seen blk-wbt related IO hang several times, even inside Red Hat BZ, there is such report not sovled yet, so this patch adds support debugfs on rq_qos. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 18:46:00 -07:00
const struct blk_mq_debugfs_attr *debugfs_attrs;
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
};
struct rq_depth {
unsigned int max_depth;
int scale_step;
bool scaled_max;
unsigned int queue_depth;
unsigned int default_depth;
};
static inline struct rq_qos *rq_qos_id(struct request_queue *q,
enum rq_qos_id id)
{
struct rq_qos *rqos;
for (rqos = q->rq_qos; rqos; rqos = rqos->next) {
if (rqos->id == id)
break;
}
return rqos;
}
static inline struct rq_qos *wbt_rq_qos(struct request_queue *q)
{
return rq_qos_id(q, RQ_QOS_WBT);
}
blk-iolatency: s/blkcg_rq_qos/iolat_rq_qos/ The name was too generic given that there are multiple blkcg rq-qos policies. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20230413000649.115785-4-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-12 17:06:48 -07:00
static inline struct rq_qos *iolat_rq_qos(struct request_queue *q)
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
{
blkcg: s/RQ_QOS_CGROUP/RQ_QOS_LATENCY/ io.weight is gonna be another rq_qos cgroup mechanism. Let's rename RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in preparation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:56 -07:00
return rq_qos_id(q, RQ_QOS_LATENCY);
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
}
static inline void rq_wait_init(struct rq_wait *rq_wait)
{
atomic_set(&rq_wait->inflight, 0);
init_waitqueue_head(&rq_wait->wait);
}
blk-rq-qos: make rq_qos_add and rq_qos_del more useful Switch to passing a gendisk, and make rq_qos_add initialize all required fields and drop the not required q argument from rq_qos_del. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 08:03:54 -07:00
int rq_qos_add(struct rq_qos *rqos, struct gendisk *disk, enum rq_qos_id id,
blk-rq-qos: constify rq_qos_ops These op vectors are constant, so mark them const. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 08:03:55 -07:00
const struct rq_qos_ops *ops);
blk-rq-qos: make rq_qos_add and rq_qos_del more useful Switch to passing a gendisk, and make rq_qos_add initialize all required fields and drop the not required q argument from rq_qos_del. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03 08:03:54 -07:00
void rq_qos_del(struct rq_qos *rqos);
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
block: add rq_qos_wait to rq_qos Originally when I split out the common code from blk-wbt into rq_qos I left the wbt_wait() where it was and simply copied and modified it slightly to work for io-latency. However they are both basically the same thing, and as time has gone on wbt_wait() has ended up much smarter and kinder than it was when I copied it into io-latency, which means io-latency has lost out on these improvements. Since they are the same thing essentially except for a few minor things, create rq_qos_wait() that replicates what wbt_wait() currently does with callbacks that can be passed in for the snowflakes to do their own thing as appropriate. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04 10:59:02 -07:00
typedef bool (acquire_inflight_cb_t)(struct rq_wait *rqw, void *private_data);
typedef void (cleanup_cb_t)(struct rq_wait *rqw, void *private_data);
void rq_qos_wait(struct rq_wait *rqw, void *private_data,
acquire_inflight_cb_t *acquire_inflight_cb,
cleanup_cb_t *cleanup_cb);
blk-rq-qos: make depth comparisons unsigned With the change to use UINT_MAX I broke the depth check as any value of inflight (ie 0) would be less than (int)UINT_MAX. Fix this by changing everything to unsigned int to match the depth. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-19 18:42:13 -07:00
bool rq_wait_inc_below(struct rq_wait *rq_wait, unsigned int limit);
blk-wbt: fix performance regression in wbt scale_up/scale_down scale_up wakes up waiters after scaling up. But after scaling max, it should not wake up more waiters as waiters will not have anything to do. This patch fixes this by making scale_up (and also scale_down) return when threshold is reached. This bug causes increased fdatasync latency when fdatasync and dd conv=sync are performed in parallel on 4.19 compared to 4.14. This bug was introduced during refactoring of blk-wbt code. Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-05 11:59:27 -07:00
bool rq_depth_scale_up(struct rq_depth *rqd);
bool rq_depth_scale_down(struct rq_depth *rqd, bool hard_throttle);
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
bool rq_depth_calc_max_depth(struct rq_depth *rqd);
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
void __rq_qos_cleanup(struct rq_qos *rqos, struct bio *bio);
void __rq_qos_done(struct rq_qos *rqos, struct request *rq);
void __rq_qos_issue(struct rq_qos *rqos, struct request *rq);
void __rq_qos_requeue(struct rq_qos *rqos, struct request *rq);
void __rq_qos_throttle(struct rq_qos *rqos, struct bio *bio);
void __rq_qos_track(struct rq_qos *rqos, struct request *rq, struct bio *bio);
block/rq_qos: add rq_qos_merge() Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:54 -07:00
void __rq_qos_merge(struct rq_qos *rqos, struct request *rq, struct bio *bio);
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
void __rq_qos_done_bio(struct rq_qos *rqos, struct bio *bio);
block/rq_qos: implement rq_qos_ops->queue_depth_changed() wbt already gets queue depth changed notification through wbt_set_queue_depth(). Generalize it into rq_qos_ops->queue_depth_changed() so that other rq_qos policies can easily hook into the events too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:55 -07:00
void __rq_qos_queue_depth_changed(struct rq_qos *rqos);
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
static inline void rq_qos_cleanup(struct request_queue *q, struct bio *bio)
{
if (q->rq_qos)
__rq_qos_cleanup(q->rq_qos, bio);
}
static inline void rq_qos_done(struct request_queue *q, struct request *rq)
{
block: skip QUEUE_FLAG_STATS and rq-qos for passthrough io Write-back throttling (WBT) enables QUEUE_FLAG_STATS on the request queue. But WBT does not make sense for passthrough io, so skip QUEUE_FLAG_STATS processing. Also skip rq_qos_issue/done for passthrough io. Overall, the change gives ~11% hike in peak performance. Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20231123190331.7934-1-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-23 12:03:31 -07:00
if (q->rq_qos && !blk_rq_is_passthrough(rq))
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
__rq_qos_done(q->rq_qos, rq);
}
static inline void rq_qos_issue(struct request_queue *q, struct request *rq)
{
if (q->rq_qos)
__rq_qos_issue(q->rq_qos, rq);
}
static inline void rq_qos_requeue(struct request_queue *q, struct request *rq)
{
if (q->rq_qos)
__rq_qos_requeue(q->rq_qos, rq);
}
block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") Cc: stable@vger.kernel.org # v5.15+ Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/Yi7rdrzQEHjJLGKB@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-14 00:15:02 -07:00
static inline void rq_qos_done_bio(struct bio *bio)
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
{
block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") Cc: stable@vger.kernel.org # v5.15+ Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/Yi7rdrzQEHjJLGKB@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-14 00:15:02 -07:00
if (bio->bi_bdev && (bio_flagged(bio, BIO_QOS_THROTTLED) ||
bio_flagged(bio, BIO_QOS_MERGED))) {
struct request_queue *q = bdev_get_queue(bio->bi_bdev);
if (q->rq_qos)
__rq_qos_done_bio(q->rq_qos, bio);
}
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
}
static inline void rq_qos_throttle(struct request_queue *q, struct bio *bio)
{
block: only mark bio as tracked if it really is tracked We set BIO_TRACKED unconditionally when rq_qos_throttle() is called, even though we may not even have an rq_qos handler. Only mark it as TRACKED if it really is potentially tracked. This saves considerable time for the case where the bio isn't tracked: 2.64% -1.65% [kernel.vmlinux] [k] bio_endio Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15 19:06:18 -07:00
if (q->rq_qos) {
block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") Cc: stable@vger.kernel.org # v5.15+ Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/Yi7rdrzQEHjJLGKB@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-14 00:15:02 -07:00
bio_set_flag(bio, BIO_QOS_THROTTLED);
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
__rq_qos_throttle(q->rq_qos, bio);
block: only mark bio as tracked if it really is tracked We set BIO_TRACKED unconditionally when rq_qos_throttle() is called, even though we may not even have an rq_qos handler. Only mark it as TRACKED if it really is potentially tracked. This saves considerable time for the case where the bio isn't tracked: 2.64% -1.65% [kernel.vmlinux] [k] bio_endio Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15 19:06:18 -07:00
}
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
}
static inline void rq_qos_track(struct request_queue *q, struct request *rq,
struct bio *bio)
{
if (q->rq_qos)
__rq_qos_track(q->rq_qos, rq, bio);
}
block/rq_qos: add rq_qos_merge() Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:54 -07:00
static inline void rq_qos_merge(struct request_queue *q, struct request *rq,
struct bio *bio)
{
block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") Cc: stable@vger.kernel.org # v5.15+ Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/Yi7rdrzQEHjJLGKB@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-14 00:15:02 -07:00
if (q->rq_qos) {
bio_set_flag(bio, BIO_QOS_MERGED);
block/rq_qos: add rq_qos_merge() Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:54 -07:00
__rq_qos_merge(q->rq_qos, rq, bio);
block: fix rq-qos breakage from skipping rq_qos_done_bio() a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set. While this fixed a potential oops, it also broke blk-iocost by skipping the done_bio callback for merged bios. Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(), rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED distinguishing the former from the latter. rq_qos_done_bio() is not called for bios which wenth through rq_qos_merge(). This royally confuses blk-iocost as the merged bios never finish and are considered perpetually in-flight. One reliably reproducible failure mode is an intermediate cgroup geting stuck active preventing its children from being activated due to the leaf-only rule, leading to loss of control. The following is from resctl-bench protection scenario which emulates isolating a web server like workload from a memory bomb run on an iocost configuration which should yield a reasonable level of protection. # cat /sys/block/nvme2n1/device/model Samsung SSD 970 PRO 512GB # cat /sys/fs/cgroup/io.cost.model 259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025 # cat /sys/fs/cgroup/io.cost.qos 259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00 # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82 lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6 Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96% The isolation result of 58.12% is close to what this device would show without any IO control. Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and calling rq_qos_done_bio() on them too. For consistency and clarity, rename BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into rq_qos_done_bio() so that it's next to the code paths that set the flags. With the patch applied, the above same benchmark shows: # resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1 ... Memory Hog Summary ================== IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m Isolation and Request Latency Impact Distributions: min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81 lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68 Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't tracked") Cc: stable@vger.kernel.org # v5.15+ Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/Yi7rdrzQEHjJLGKB@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-14 00:15:02 -07:00
}
block/rq_qos: add rq_qos_merge() Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:54 -07:00
}
block/rq_qos: implement rq_qos_ops->queue_depth_changed() wbt already gets queue depth changed notification through wbt_set_queue_depth(). Generalize it into rq_qos_ops->queue_depth_changed() so that other rq_qos policies can easily hook into the events too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 15:05:55 -07:00
static inline void rq_qos_queue_depth_changed(struct request_queue *q)
{
if (q->rq_qos)
__rq_qos_queue_depth_changed(q->rq_qos);
}
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
void rq_qos_exit(struct request_queue *);
blk-rq-qos: inline check for q->rq_qos functions Put the short code in the fast path, where we don't have any functions attached to the queue. This minimizes the impact on the hot path in the core code. Cc: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:25:10 -07:00
blk-rq-qos: refactor out common elements of blk-wbt blkcg-qos is going to do essentially what wbt does, only on a cgroup basis. Break out the common code that will be shared between blkcg-qos and wbt into blk-rq-qos.* so they can both utilize the same infrastructure. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-03 08:32:35 -07:00
#endif
Copy Permalink