1
linux/arch/mips/kernel/signal_n32.c

147 lines
3.6 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2003 Broadcom Corporation
*/
#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compat.h>
#include <linux/bitops.h>
#include <asm/abi.h>
#include <asm/asm.h>
#include <asm/cacheflush.h>
#include <asm/compat-signal.h>
#include <asm/sim.h>
#include <linux/uaccess.h>
#include <asm/ucontext.h>
#include <asm/fpu.h>
#include <asm/cpu-features.h>
#include <asm/syscalls.h>
#include "signal-common.h"
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
*/
#define __NR_N32_restart_syscall 6214
struct ucontextn32 {
u32 uc_flags;
s32 uc_link;
compat_stack_t uc_stack;
struct sigcontext uc_mcontext;
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
struct rt_sigframe_n32 {
u32 rs_ass[4]; /* argument save space for o32 */
u32 rs_pad[2]; /* Was: signal trampoline */
struct compat_siginfo rs_info;
struct ucontextn32 rs_uc;
};
asmlinkage void sysn32_rt_sigreturn(void)
{
struct rt_sigframe_n32 __user *frame;
struct pt_regs *regs;
sigset_t set;
int sig;
regs = current_pt_regs();
frame = (struct rt_sigframe_n32 __user *)regs->regs[29];
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask))
goto badframe;
set_current_blocked(&set);
sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext);
if (sig < 0)
goto badframe;
else if (sig)
force_sig(sig);
if (compat_restore_altstack(&frame->rs_uc.uc_stack))
goto badframe;
/*
* Don't let your children do this ...
*/
__asm__ __volatile__(
"move\t$29, %0\n\t"
"j\tsyscall_exit"
: /* no outputs */
: "r" (regs));
/* Unreached */
badframe:
force_sig(SIGSEGV);
}
static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig,
struct pt_regs *regs, sigset_t *set)
{
struct rt_sigframe_n32 __user *frame;
int err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
if (!access_ok(frame, sizeof (*frame)))
return -EFAULT;
/* Create siginfo. */
err |= copy_siginfo_to_user32(&frame->rs_info, &ksig->info);
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
err |= __put_user(0, &frame->rs_uc.uc_link);
err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set);
if (err)
return -EFAULT;
/*
* Arguments to signal handler:
*
* a0 = signal number
* a1 = 0 (should be cause)
* a2 = pointer to ucontext
*
* $25 and c0_epc point to the signal handler, $29 points to
* the struct rt_sigframe.
*/
regs->regs[ 4] = ksig->sig;
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
current->comm, current->pid,
frame, regs->cp0_epc, regs->regs[31]);
return 0;
}
struct mips_abi mips_abi_n32 = {
.setup_rt_frame = setup_rt_frame_n32,
.restart = __NR_N32_restart_syscall,
.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 01:54:38 -07:00
.vdso = &vdso_image_n32,
};