1
linux/arch/alpha/include/asm/core_mcpcia.h

405 lines
12 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 07:07:57 -07:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ALPHA_MCPCIA__H__
#define __ALPHA_MCPCIA__H__
/* Define to experiment with fitting everything into one 128MB HAE window.
One window per bus, that is. */
#define MCPCIA_ONE_HAE_WINDOW 1
#include <linux/types.h>
#include <asm/compiler.h>
#include <asm/mce.h>
/*
* MCPCIA is the internal name for a core logic chipset which provides
* PCI access for the RAWHIDE family of systems.
*
* This file is based on:
*
* RAWHIDE System Programmer's Manual
* 16-May-96
* Rev. 1.4
*
*/
/*------------------------------------------------------------------------**
** **
** I/O procedures **
** **
** inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers **
** inportbxt: 8 bits only **
** inport: alias of inportw **
** outport: alias of outportw **
** **
** inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers **
** inmembxt: 8 bits only **
** inmem: alias of inmemw **
** outmem: alias of outmemw **
** **
**------------------------------------------------------------------------*/
/* MCPCIA ADDRESS BIT DEFINITIONS
*
* 3333 3333 3322 2222 2222 1111 1111 11
* 9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
* ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
* 1 000
* ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
* | |\|
* | Byte Enable --+ |
* | Transfer Length --+
* +-- IO space, not cached
*
* Byte Transfer
* Enable Length Transfer Byte Address
* adr<6:5> adr<4:3> Length Enable Adder
* ---------------------------------------------
* 00 00 Byte 1110 0x000
* 01 00 Byte 1101 0x020
* 10 00 Byte 1011 0x040
* 11 00 Byte 0111 0x060
*
* 00 01 Word 1100 0x008
* 01 01 Word 1001 0x028 <= Not supported in this code.
* 10 01 Word 0011 0x048
*
* 00 10 Tribyte 1000 0x010
* 01 10 Tribyte 0001 0x030
*
* 10 11 Longword 0000 0x058
*
* Note that byte enables are asserted low.
*
*/
#define MCPCIA_MAX_HOSES 4
#define MCPCIA_MID(m) ((unsigned long)(m) << 33)
/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively.
Durango adds PCI2 and PCI3 at MID 6 and 7 respectively. */
#define MCPCIA_HOSE2MID(h) ((h) + 4)
#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */
/*
* Memory spaces:
*/
#define MCPCIA_SPARSE(m) (IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m))
#define MCPCIA_DENSE(m) (IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m))
#define MCPCIA_IO(m) (IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m))
#define MCPCIA_CONF(m) (IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m))
#define MCPCIA_CSR(m) (IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m))
#define MCPCIA_IO_IACK(m) (IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m))
#define MCPCIA_DENSE_IO(m) (IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m))
#define MCPCIA_DENSE_CONF(m) (IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m))
/*
* General Registers
*/
#define MCPCIA_REV(m) (MCPCIA_CSR(m) + 0x000)
#define MCPCIA_WHOAMI(m) (MCPCIA_CSR(m) + 0x040)
#define MCPCIA_PCI_LAT(m) (MCPCIA_CSR(m) + 0x080)
#define MCPCIA_CAP_CTRL(m) (MCPCIA_CSR(m) + 0x100)
#define MCPCIA_HAE_MEM(m) (MCPCIA_CSR(m) + 0x400)
#define MCPCIA_HAE_IO(m) (MCPCIA_CSR(m) + 0x440)
#define _MCPCIA_IACK_SC(m) (MCPCIA_CSR(m) + 0x480)
#define MCPCIA_HAE_DENSE(m) (MCPCIA_CSR(m) + 0x4C0)
/*
* Interrupt Control registers
*/
#define MCPCIA_INT_CTL(m) (MCPCIA_CSR(m) + 0x500)
#define MCPCIA_INT_REQ(m) (MCPCIA_CSR(m) + 0x540)
#define MCPCIA_INT_TARG(m) (MCPCIA_CSR(m) + 0x580)
#define MCPCIA_INT_ADR(m) (MCPCIA_CSR(m) + 0x5C0)
#define MCPCIA_INT_ADR_EXT(m) (MCPCIA_CSR(m) + 0x600)
#define MCPCIA_INT_MASK0(m) (MCPCIA_CSR(m) + 0x640)
#define MCPCIA_INT_MASK1(m) (MCPCIA_CSR(m) + 0x680)
#define MCPCIA_INT_ACK0(m) (MCPCIA_CSR(m) + 0x10003f00)
#define MCPCIA_INT_ACK1(m) (MCPCIA_CSR(m) + 0x10003f40)
/*
* Performance Monitor registers
*/
#define MCPCIA_PERF_MON(m) (MCPCIA_CSR(m) + 0x300)
#define MCPCIA_PERF_CONT(m) (MCPCIA_CSR(m) + 0x340)
/*
* Diagnostic Registers
*/
#define MCPCIA_CAP_DIAG(m) (MCPCIA_CSR(m) + 0x700)
#define MCPCIA_TOP_OF_MEM(m) (MCPCIA_CSR(m) + 0x7C0)
/*
* Error registers
*/
#define MCPCIA_MC_ERR0(m) (MCPCIA_CSR(m) + 0x800)
#define MCPCIA_MC_ERR1(m) (MCPCIA_CSR(m) + 0x840)
#define MCPCIA_CAP_ERR(m) (MCPCIA_CSR(m) + 0x880)
#define MCPCIA_PCI_ERR1(m) (MCPCIA_CSR(m) + 0x1040)
#define MCPCIA_MDPA_STAT(m) (MCPCIA_CSR(m) + 0x4000)
#define MCPCIA_MDPA_SYN(m) (MCPCIA_CSR(m) + 0x4040)
#define MCPCIA_MDPA_DIAG(m) (MCPCIA_CSR(m) + 0x4080)
#define MCPCIA_MDPB_STAT(m) (MCPCIA_CSR(m) + 0x8000)
#define MCPCIA_MDPB_SYN(m) (MCPCIA_CSR(m) + 0x8040)
#define MCPCIA_MDPB_DIAG(m) (MCPCIA_CSR(m) + 0x8080)
/*
* PCI Address Translation Registers.
*/
#define MCPCIA_SG_TBIA(m) (MCPCIA_CSR(m) + 0x1300)
#define MCPCIA_HBASE(m) (MCPCIA_CSR(m) + 0x1340)
#define MCPCIA_W0_BASE(m) (MCPCIA_CSR(m) + 0x1400)
#define MCPCIA_W0_MASK(m) (MCPCIA_CSR(m) + 0x1440)
#define MCPCIA_T0_BASE(m) (MCPCIA_CSR(m) + 0x1480)
#define MCPCIA_W1_BASE(m) (MCPCIA_CSR(m) + 0x1500)
#define MCPCIA_W1_MASK(m) (MCPCIA_CSR(m) + 0x1540)
#define MCPCIA_T1_BASE(m) (MCPCIA_CSR(m) + 0x1580)
#define MCPCIA_W2_BASE(m) (MCPCIA_CSR(m) + 0x1600)
#define MCPCIA_W2_MASK(m) (MCPCIA_CSR(m) + 0x1640)
#define MCPCIA_T2_BASE(m) (MCPCIA_CSR(m) + 0x1680)
#define MCPCIA_W3_BASE(m) (MCPCIA_CSR(m) + 0x1700)
#define MCPCIA_W3_MASK(m) (MCPCIA_CSR(m) + 0x1740)
#define MCPCIA_T3_BASE(m) (MCPCIA_CSR(m) + 0x1780)
/* Hack! Only words for bus 0. */
#ifndef MCPCIA_ONE_HAE_WINDOW
#define MCPCIA_HAE_ADDRESS MCPCIA_HAE_MEM(4)
#endif
#define MCPCIA_IACK_SC _MCPCIA_IACK_SC(4)
/*
* The canonical non-remaped I/O and MEM addresses have these values
* subtracted out. This is arranged so that folks manipulating ISA
* devices can use their familiar numbers and have them map to bus 0.
*/
#define MCPCIA_IO_BIAS MCPCIA_IO(4)
#define MCPCIA_MEM_BIAS MCPCIA_DENSE(4)
/* Offset between ram physical addresses and pci64 DAC bus addresses. */
#define MCPCIA_DAC_OFFSET (1UL << 40)
/*
* Data structure for handling MCPCIA machine checks:
*/
struct el_MCPCIA_uncorrected_frame_mcheck {
struct el_common header;
struct el_common_EV5_uncorrectable_mcheck procdata;
};
#ifdef __KERNEL__
#ifndef __EXTERN_INLINE
#define __EXTERN_INLINE extern inline
#define __IO_EXTERN_INLINE
#endif
/*
* I/O functions:
*
* MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164)
* and EV56 (21164a) processors, can use either a sparse address mapping
* scheme, or the so-called byte-word PCI address space, to get at PCI memory
* and I/O.
*
* Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE.
*/
/*
* Memory functions. 64-bit and 32-bit accesses are done through
* dense memory space, everything else through sparse space.
*
* For reading and writing 8 and 16 bit quantities we need to
* go through one of the three sparse address mapping regions
* and use the HAE_MEM CSR to provide some bits of the address.
* The following few routines use only sparse address region 1
* which gives 1Gbyte of accessible space which relates exactly
* to the amount of PCI memory mapping *into* system address space.
* See p 6-17 of the specification but it looks something like this:
*
* 21164 Address:
*
* 3 2 1
* 9876543210987654321098765432109876543210
* 1ZZZZ0.PCI.QW.Address............BBLL
*
* ZZ = SBZ
* BB = Byte offset
* LL = Transfer length
*
* PCI Address:
*
* 3 2 1
* 10987654321098765432109876543210
* HHH....PCI.QW.Address........ 00
*
* HHH = 31:29 HAE_MEM CSR
*
*/
#define vip volatile int __force *
#define vuip volatile unsigned int __force *
#define vulp volatile unsigned long __force *
#ifndef MCPCIA_ONE_HAE_WINDOW
#define MCPCIA_FROB_MMIO \
if (__mcpcia_is_mmio(hose)) { \
set_hae(hose & 0xffffffff); \
hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \
}
#else
#define MCPCIA_FROB_MMIO \
if (__mcpcia_is_mmio(hose)) { \
hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4); \
}
#endif
extern inline int __mcpcia_is_mmio(unsigned long addr)
{
return (addr & 0x80000000UL) == 0;
}
__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
unsigned long result;
MCPCIA_FROB_MMIO;
result = *(vip) ((addr << 5) + hose + 0x00);
return __kernel_extbl(result, addr & 3);
}
__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
unsigned long w;
MCPCIA_FROB_MMIO;
w = __kernel_insbl(b, addr & 3);
*(vuip) ((addr << 5) + hose + 0x00) = w;
}
__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
unsigned long result;
MCPCIA_FROB_MMIO;
result = *(vip) ((addr << 5) + hose + 0x08);
return __kernel_extwl(result, addr & 3);
}
__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
unsigned long w;
MCPCIA_FROB_MMIO;
w = __kernel_inswl(b, addr & 3);
*(vuip) ((addr << 5) + hose + 0x08) = w;
}
__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr;
if (!__mcpcia_is_mmio(addr))
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
return *(vuip)addr;
}
__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr;
if (!__mcpcia_is_mmio(addr))
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
*(vuip)addr = b;
}
__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr;
if (!__mcpcia_is_mmio(addr))
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
return *(vulp)addr;
}
__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long)xaddr;
if (!__mcpcia_is_mmio(addr))
addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
*(vulp)addr = b;
}
__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
{
return (void __iomem *)(addr + MCPCIA_IO_BIAS);
}
__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr,
unsigned long size)
{
return (void __iomem *)(addr + MCPCIA_MEM_BIAS);
}
__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr)
{
return addr >= MCPCIA_SPARSE(0);
}
__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
return __mcpcia_is_mmio(addr);
}
#undef MCPCIA_FROB_MMIO
#undef vip
#undef vuip
#undef vulp
#undef __IO_PREFIX
#define __IO_PREFIX mcpcia
#define mcpcia_trivial_rw_bw 2
#define mcpcia_trivial_rw_lq 1
#define mcpcia_trivial_io_bw 0
#define mcpcia_trivial_io_lq 0
#define mcpcia_trivial_iounmap 1
#include <asm/io_trivial.h>
#ifdef __IO_EXTERN_INLINE
#undef __EXTERN_INLINE
#undef __IO_EXTERN_INLINE
#endif
#endif /* __KERNEL__ */
#endif /* __ALPHA_MCPCIA__H__ */