This removes a significant, complex chunk of database code. The
"replace" operation walked both the old and new in lockstep and made the
relevant changes to make the new situation correct. But since delta
indexes we pretty much never need this - we just used replace to drop
the existing data and start over.
This makes that explicit and removes the complexity.
(This is one of those things that would be annoying to make case
insensitive, while the actual "drop and then insert" that we do is
easier.)
This is fairly well unit tested...
The one change to the tests is to cover the fact that previously replace
with something identical didn't bump the sequence number, while
obviously removing everything and re-inserting does. This is not
behavior we depend on anywhere.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4500
LGTM: imsodin, AudriusButkevicius
With VPNs and stuff we can get a single failure on an interface that
supposedly supports broadcasts without it being fatal.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4415
The folder marker conversion forgot to hide the .stfolder. This adds
that, for those who have not yet been converted.
Also adds Hide() calls to the folder start, to mend historical
unhidedness. (I'm sure this will upset someone who is manually managing
their .stignores in the other direction...)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4384
When STHASHING is set, don't benchmark as it's already decided. If weak
hashing isn't set to "auto", don't benchmark that either.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4349
These functions were very naive and slow. We haven't done much about
them because they pretty much don't matter at all for Syncthing
performance. They are however called very often in the discovery server
and these optimizations have a huge effect on the CPU load on the
public discovery servers.
The code isn't exactly obvious, but we have good test coverage on all
these functions.
benchmark old ns/op new ns/op delta
BenchmarkLuhnify-8 12458 1045 -91.61%
BenchmarkUnluhnify-8 12598 1074 -91.47%
BenchmarkChunkify-8 10792 104 -99.04%
benchmark old allocs new allocs delta
BenchmarkLuhnify-8 18 1 -94.44%
BenchmarkUnluhnify-8 18 1 -94.44%
BenchmarkChunkify-8 44 2 -95.45%
benchmark old bytes new bytes delta
BenchmarkLuhnify-8 1278 64 -94.99%
BenchmarkUnluhnify-8 1278 64 -94.99%
BenchmarkChunkify-8 42552 128 -99.70%
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4346
Currently all errors during pulling and the first of these errors again on
finishing are logged to info. Besides that the errors logged when finishing
are stored in f.errors. This PR moves all logging during pulling to the debug
channel (they might still be relevant in some obscure debugging case) and
uses the stored errors to log the main error per fail when all pulling
iterations are done and failed.
Additional instead of trying 11 times it now only tries 3 times.
This is the first part of what is discussed here:
https://forum.syncthing.net/t/reduce-verboseness-of-puller/10261
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4338
This updates kcp and uses our own fork which:
1. Keys sessions not just by remote address, but by remote address +
conversation id 2. Allows not to close connections that were passed directly
to the library. 3. Resets cache key if the session gets terminated.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4339
LGTM: calmh
Prior to this, the following is possible:
- Create a symlink "foo -> /somewhere", it gets synced
- Delete "foo", it gets versioned
- Create "foo/bar", it gets synced
- Delete "foo/bar", it gets versioned in "/somewhere/bar"
With this change, versioners should never version symlinks.
Otherwise all the lines from includes will be shown in the web UI instead of
just the #include ... line. This problem was introduced in #3996.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4248
LGTM: calmh
This removes the special handling of minor versions as major when the
actual major is zero, and adds the special case that upgrades from 0.x
to 1.x are considered minor. 0.x to 2.x or 1.x to 2.x etc are still
considered major.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4226
This solves the erratic test failures on model.TestIgnores by ensuring
that the ignore patterns are reloaded even in the face of unchanged
timestamps.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4208
The folder already knew how to stop properly, but the fs.Walk() didn't
and can potentially take a very long time. This adds context support to
Walk and the underlying scanning stuff, and passes in an appropriate
context from above. The stop channel in model.folder is replaced with a
context for this purpose.
To test I added an infiniteFS that represents a large amount of data
(not actually infinite, but close) and verify that walking it is
properly stopped. For that to be implemented smoothly I moved out the
Walk function to it's own type, as typically the implementer of a new
filesystem type might not need or want to reimplement Walk.
It's somewhat tricky to test that this actually works properly on the
actual sendReceiveFolder and so on, as those are started from inside the
model and the filesystem isn't easily pluggable etc. Instead I've tested
that part manually by adding a huge folder and verifying that pause,
resume and reconfig do the right things by looking at debug output.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4117
So, when first implementing the database layer I added panics on every
unexpected error condition mostly to be sure to flush out bugs and
inconsistencies. Then it became sort of standard, and we don't seem to
have many bugs here any more so the panics are usually caused by things
like checksum errors on read. But it's not an optimal user experience to
crash all the time.
Here I've weeded out most of the panics, while retaining a few "can't
happen" ones like errors on marshalling and write that we really can't
recover from.
For the rest, I'm mostly treating any read error as "entry didn't
exist". This should mean we'll rescan the file and correct the info (if
scanning) or treat it as a new file and do conflict handling (when
pulling). In some cases things like our global stats may be slightly
incorrect until a restart, if a database entry goes suddenly missing
during runtime.
All in all, I think this makes us a bit more robust and friendly without
introducing too many risks for the user. If the database is truly toast,
probably many other things on the system will be toast as well...
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4118
Harmonize how we use batches in the model, using ProtoSize() to judge
the actual weight of the entire batch instead of estimating. Use smaller
batches in the block map - I think we might have though that batch.Len()
in the leveldb was the batch size in bytes, but it's actually number of
operations.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4114
The mechanism to disallow manual scans before the initial scan completed
(#3996) , had the side effect, that if the initial scan failed, no further
scans are allowed. So this marks the initial scan as finished regardless of
whether it succeeded or not.
There was also redundant code in rofolder and a pointless check for folder
health in scanSubsIfHealthy (happens in internalScanFolderSubdirs as well).
This also moves logging from folder.go to ro/rw-folder.go to include the
information about whether it is send-only or send-receive
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4104
This adds a parameter "events" to the /rest/events endpoint. It should
be a comma separated list of the events the consumer is interested in.
When not given it defaults to the current set of events, so it's
backwards compatible.
The API service then manages subscriptions, creating them as required
for each requested event mask. Old subscriptions are not "garbage
collected" - it's assumed that in normal usage the set of event
subscriptions will be small enough. Possibly lower than before, as we
will not set up the disk event subscription unless it's actually used.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4092
This deprecates the current minDiskFreePct setting and introduces
minDiskFree. The latter is, in it's serialized form, a string with a
unit. We accept percentages ("2.35%") and absolute values ("250 k", "12.5
Gi"). Common suffixes are understood. The config editor lets the user
enter the string, and validates it.
We still default to "1 %", but the user can change that to an absolute
value at will.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4087
LGTM: AudriusButkevicius, imsodin
This adds a new config AllowedNetworks per device, which when set should
contain a list of network prefixes (192.168.0.0/126 etc) that are
allowed for the given device. The connection service will not attempt
connections to addresses outside of the given networks and incoming
connections will be rejected as well.
I've added the config to the normal device editor and shown it (when
set) in the device summary on the main screen.
There's a unit test for the IsAllowedNetwork method, I've done some
manual sanity testing on top of that.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4073
One more step on the path of the great refactoring. Touches rwfolder a
little bit since it uses the Lstat from fs as well, but mostly this is
just on the scanner as rwfolder is scheduled for a later refactor.
There are a couple of usages of fs.DefaultFilesystem that will in the
end become a filesystem injected from the top, but that comes later.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4070
LGTM: AudriusButkevicius, imsodin
