This adds error returns to model methods called by the protocol layer.
Returning an error will cause the connection to be torn down as the
message couldn't be handled. Using this to signal that a folder isn't
currently available will then cause a reconnection a few moments later,
when it'll hopefully work better.
Tested manually by running with STRECHECKDBEVERY=0 on a nontrivially
sized setup. This panics reliably before this patch, but just causes a
disconnect/reconnect now.
As foretold by the prophecy, "once the database refactor is merged, then
shall appear a request to propagate errors from the store known
throughout the land as the NamedspacedKV, and it shall be good".
* lib/versioner: Reduce surface area
This is a refactor while I was anyway rooting around in the versioner.
Instead of exporting every possible implementation and the factory and
letting the caller do whatever, this now encapsulates all that and
exposes a New() that takes a config.VersioningConfiguration.
Given that and that we don't know (from the outside) how a versioner
works or what state it keeps, we now just construct it once per folder
and keep it around. Previously it was recreated for each restore
request.
* unparam
* wip
The check in ClusterConfig() when iterating through announced devices
in a folder explicitly skips entries without a non-zero IndexID.
Therefore, the check for IndexID == 0 just below will never be true
and the intended cleanup of local index data will not happen.
Plainly remove that check to make the intended case distinction work.
* lib/protocol: Wait for reader/writer loops on close (fixes#4170)
* waitgroup
* lib/model: Don't hold lock while closing connection
* fix comments
* review (lock once, func argument) and naming
* cmd/syncthing, lib/gui: Separate gui into own package (ref #4085)
* fix tests
* Don't use main as interface name (make old go happy)
* gui->api
* don't leak state via locations and use in-tree config
* let api (un-)subscribe to config
* interface naming and exporting
* lib/ur
* fix tests and lib/foldersummary
* shorter URVersion and ur debug fix
* review
* model.JsonCompletion(FolderCompletion) -> FolderCompletion.Map()
* rename debug facility https -> api
* folder summaries in model
* disassociate unrelated constants
* fix merge fail
* missing id assignement
* lib/tlsutil: Enable TLS 1.3 when available, on test builds (fixes#5065)
This enables TLS 1.3 negotiation on Go 1.12 by setting the GODEBUG
variable. For now, this just gets enabled on test versions (those with a
dash in the version number).
Users wishing to enable this on production builds can set GODEBUG
manually.
The string representation of connections now includes the TLS version
and cipher suite. This becomes part of the log output on connections.
That is, when talking to an old client:
Established secure connection .../TLS1.2-TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
and now potentially:
Established secure connection .../TLS1.3-TLS_AES_128_GCM_SHA256
(The cipher suite was there previously in the log output, but not the
TLS version.)
I also added this info as a new Crypto() method on the connection, and
propagate this out to the API and GUI, where it can be seen in the
connection address hover (although with bad word wrapping sometimes).
* wip
* wip
* cleanup Fatal in lib/config/config.go
* cleanup Fatal in lib/config/folderconfiguration.go
* cleanup Fatal in lib/model/model.go
* cleanup Fatal in cmd/syncthing/monitor.go
* cleanup Fatal in cmd/syncthing/main.go
* cleanup Fatal in lib/api
* remove Fatal methods from logger
* lowercase in errors.Wrap
* one less channel
I'm working through linter complaints, these are some fixes. Broad
categories:
1) Ignore errors where we can ignore errors: add "_ = ..." construct.
you can argue that this is annoying noise, but apart from silencing the
linter it *does* serve the purpose of highlighting that an error is
being ignored. I think this is OK, because the linter highlighted some
error cases I wasn't aware of (starting CPU profiles, for example).
2) Untyped constants where we though we had set the type.
3) A real bug where we ineffectually assigned to a shadowed err.
4) Some dead code removed.
There'll be more of these, because not all packages are fixed, but the
diff was already large enough.
This avoids waiting until next ping and timeout until the connection is actually
closed both by notifying the peer of the disconnect and by immediately closing
the local end of the connection after that. As a nice side effect, info level
logging about dropped connections now have the actual reason in it, not a generic
timeout error which looks like a real problem with the connection.
This adds a thin type that holds the state associated with the
leveldb.DB, leaving the huge Instance type more or less stateless. Also
moves some keying stuff into the DB package so that other packages need
not know the keying specifics.
(This does not, yet, fix the cmd/stindex program, in order to keep the
diff size down. Hence the keying constants are still exported.)
* lib/model, cmd/syncthing: Wait for folder restarts to complete (fixes#5233)
This is the somewhat ugly - but on the other hand clear - fix for what
is really a somewhat thorny issue. To avoid zombie folder runners a new
mutex is introduced that protects the RestartFolder operation. I hate
adding more mutexes but the alternatives I can think of are worse.
The other part of it is that the POST /rest/system/config operation now
waits for the config commit to complete. The point of this is that until
the commit has completed we should not accept another config commit. If
we did, we could end up with two separate RestartFolders queued in the
background. While they are both correct, and will run without
interfering with each other, we can't guarantee the order in which they
will run. Thus it could happen that the newer config got committed
first, and the older config commited after that, leaving us with the
wrong config running.
* test
* wip
* hax
* hax
* unflake test
* per folder mutexes
* paranoia
* race
The problem here is that we would update the sequence index before
updating the FileInfos, which would result in a high sequence number
pointing to a low-sequence FileInfo. The index sender would pick up the
high sequence number, send the old file, and think everything was good.
On the receiving side the old file is a no-op and ignored. The file
remains out of sync until another update for it happens.
This fixes that by correcting the order of operations in the database
update: first we remove old sequence index entries, then we update the
FileInfos (which now don't have anything pointing to them) and then we
add the sequence indexes (which the index sender can see).
The other option is to add "proper" transactions where required at the
database layer. I actually have a branch for that, but it's literally
thousands of lines of diff and I'm putting that off for another day as
this solves the problem...
The problem here is that we would update the sequence index before
updating the FileInfos, which would result in a high sequence number
pointing to a low-sequence FileInfo. The index sender would pick up the
high sequence number, send the old file, and think everything was good.
On the receiving side the old file is a no-op and ignored. The file
remains out of sync until another update for it happens.
This fixes that by correcting the order of operations in the database
update: first we remove old sequence index entries, then we update the
FileInfos (which now don't have anything pointing to them) and then we
add the sequence indexes (which the index sender can see).
The other option is to add "proper" transactions where required at the
database layer. I actually have a branch for that, but it's literally
thousands of lines of diff and I'm putting that off for another day as
this solves the problem...
Adds a receive only folder type that does not send changes, and where the user can optionally revert local changes. Also changes some of the icons to make the three folder types distinguishable.
We have the invalid bit to indicate that a file isn't good. That's enough for remote devices. For ourselves, it would be good to know sometimes why the file isn't good - because it's an unsupported type, because it matches an ignore pattern, or because we detected the data is bad and we need to rescan it.
Or, and this is the main future reason for the PR, because it's a change detected on a receive only device. We will want something like the invalid flag for those changes, but marking them as invalid today means the scanner will rehash them. Hence something more fine grained is required.
This introduces a LocalFlags fields to the FileInfo where we can stash things that we care about locally. For example,
FlagLocalUnsupported = 1 << 0 // The kind is unsupported, e.g. symlinks on Windows
FlagLocalIgnored = 1 << 1 // Matches local ignore patterns
FlagLocalMustRescan = 1 << 2 // Doesn't match content on disk, must be rechecked fully
The LocalFlags fields isn't sent over the wire; instead the Invalid attribute is calculated based on the flags at index sending time. It's on the FileInfo anyway because that's what we serialize to database etc.
The actual Invalid flag should after this just be considered when building the global state and figuring out availability for remote devices. It is not used for local file index entries.
I'm trying to slowly clean this up a bit, and moving functionality out
into the folder types and having those methods not reach into model is
part of it. That can mean takign some odd arguments in the meantime,
some of those should probably become interfaces or properties on folder
in the long term.
Instead of walking and unmarshalling the entire db and sorting the resulting
file infos by sequence, add store device keys by sequence number in the
database. Thus only the required file infos need be unmarshalled and are already
sorted by index.
When scanner.Walk detects a change, it now returns the new file info as well as the old file info. It also finds deleted and ignored files while scanning.
Also directory deletions are now always committed to db after their children to prevent temporary failure on remote due to non-empty directory.
Since #4340 pulls aren't happening every 10s anymore and may be delayed up to 1h.
This means that no folder error event reaches the web UI for a long time, thus no
failed items will show up for a long time. Now errors are populated when the
web UI is opened.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4650
LGTM: AudriusButkevicius
This no longer pokes at model internals, and only touches the config.
As a result, model handles this in CommitConfiguration, which restarts
the folders if things change, which repopulate m.folderDevice, m.deviceFolder
and other interal mappings.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4639
Fix the folder restart behavior (ignore Label), improve the API for that
(imho).
Also removes the tab switch animation in the settings modal, because
annoying.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4577
This should address issue as described in https://forum.syncthing.net/t/stun-nig-party-with-paused-devices/10942/13
Essentially the model and the connection service goes out of sync in terms of thinking if we are connected or not.
Resort to model as being the ultimate source of truth.
I can't immediately pin down how this happens, yet some ideas.
ConfigSaved happens in separate routine, so it's possbile that we have some sort of device removed yet connection comes in parallel kind of thing.
However, in this case the connection exists in the model, and does not exist in the connection service and the only way for the connection to be removed
in the connection service is device removal from the config.
Given the subject, this might also be related to the device being paused.
Also, adds more info to the logs
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4533
We need to reset prevSeq so that we force a full check when someone
reconnects - the sequence number may not have changed due to the
reconnect. (This is a regression; we did this before f6ea2a7.)
Also add an optimization: we schedule a pull after scanning, but there
is no need to do so if no changes were detected. This matters now
because the scheduled pull actually traverses the database which is
expensive.
This, however, makes the pull not happen on initial scan if there were
no changes during the initial scan. Compensate by always scheduling a
pull after initial scan in the rwfolder itself.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4508
LGTM: imsodin, AudriusButkevicius
This removes a significant, complex chunk of database code. The
"replace" operation walked both the old and new in lockstep and made the
relevant changes to make the new situation correct. But since delta
indexes we pretty much never need this - we just used replace to drop
the existing data and start over.
This makes that explicit and removes the complexity.
(This is one of those things that would be annoying to make case
insensitive, while the actual "drop and then insert" that we do is
easier.)
This is fairly well unit tested...
The one change to the tests is to cover the fact that previously replace
with something identical didn't bump the sequence number, while
obviously removing everything and re-inserting does. This is not
behavior we depend on anywhere.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4500
LGTM: imsodin, AudriusButkevicius
The folder marker conversion forgot to hide the .stfolder. This adds
that, for those who have not yet been converted.
Also adds Hide() calls to the folder start, to mend historical
unhidedness. (I'm sure this will upset someone who is manually managing
their .stignores in the other direction...)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4384
