This adds our short device ID to the basic auth realm. This has at least
two consequences:
- It is different from what's presented by another device on the same
address (e.g., if I use SSH forwards to different dives on the same
local address), preventing credentials for one from being sent to
another.
- It is different from what we did previously, meaning we avoid cached
credentials from old versions interfering with the new login flow.
I don't *think* there should be things that depend on our precise realm
string, so this shouldn't break any existing setups...
Sneakily this also changes the session cookie and CSRF name, because I
think `id.Short().String()` is nicer than `id.String()[:5]` and the
short ID is two characters longer. That's also not a problem...
This makes the new default $XDG_STATE_HOME/syncthing or
~/.local/state/syncthing, while still looking in legacy locations first
for existing installs.
Note that this does not *move* existing installs, and nor should we.
Existing paths will continue to be used as-is, but the user can move the
dir into the new place if they want to use it (as they could prior to
this change as well, for that matter).
### Documentation
Needs update to the config docs about our default locations.
lib/fs: Fix conflicts on Android due to fluctuating inode change time
[1] added inode change time to file info in order to support syncing
extended attributes. However, in the case of Android, this inode change
time fluctuates, leading to unexpected conflicts even when the user has
not even touched the files on the Android device itself. Thus, in order
to prevent those conflicts from happening, do not write inode change
time on Android.
[1] 6cac308bcd
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Purpose
Deduplicated files are apparently considered 'irregular' under the hood,
this causes them to simply be ignored by Syncthing. This change is more
of a workaround than a proper fix, as the fix should probably happen in
the underlying libraries? - which may take some time. In the meanwhile,
this change should make deduplicated files be treated as regular files
and be indexed and synced as they should.
### Testing
Create some volume where deduplication is turned on (see the relevant
issue for details, including a proper description of how to reproduce
it). Prior to this change, the deduplicated files were simply ignored
(even by the indexer). After this change, the deduplicated files are
being index and synced properly.
This is motivated by the Android app:
https://github.com/syncthing/syncthing-android/pull/1982#issuecomment-1752042554
The planned fix in response to basic auth behaviour changing in #8757
was to add the `Authorization` header when opening the WebView, but it
turns out the function used only applies the header to the initial page
load, not any subsequent script loads or AJAX calls. The
`basicAuthAndSessionMiddleware` checks for no-auth exceptions before
checking the `Authorization` header, so the header has no effect on the
initial page load since the `/` path is a no-auth exception. Thus the
Android app fails to log in when opening the WebView.
This changes the order of checks in `basicAuthAndSessionMiddleware` so
that the `Authorization` header is always checked if present, and a
session cookie is set if it is valid. Only after that does the
middleware fall back to checking for no-auth exceptions.
`api_test.go` has been expanded with additional checks:
- Check that a session cookie is set whenever correct basic auth is
provided.
- Check that a session cookie is not set when basic auth is incorrect.
- Check that a session cookie is not set when authenticating with an API
token (either via `X-Api-Key` or `Authorization: Bearer`).
And an additional test case:
- Check that requests to `/` always succeed, but receive a session
cookie when correct basic auth is provided.
I have manually verified that
- The new assertions fail if the `createSession` call is removed in
`basicAuthAndSessionMiddleware`.
- The new test cases in e6e4df4d70 fail
before the change in 0e47d37e73 is
applied.
improve parsing of gui-address overrides
make checks for whether the gui-address is overridden consistent by
checking whether the environment variable is set and not an empty
string. the `Network()` function however checked for the inclusion of
a slash instead of the presence of any characters. If the config file's
gui address was set to a unix socket and the gui override to a tcp
address, then the function would have wrongly returned "unix".
the `URL()` function always returned the config file's gui address if a
unix socket was configured, even if an override was specified.
the `URL()` function wrongly formatted unix addresses. the http(s)
protocol was used as the sheme and the path was percent escaped. because
of the previous bug, this could only be triggered if the config file's
gui address was tcp and an unix socket override was given.
simplify the `useTLS()` function's codepath for overrides.
Co-authored-by: digital <didev@dinid.net>
I don't really understand under what circumstances, but sometimes these
calls panic with a "panic: counter cannot decrease in value" because the
value passed to Add() was negative.
In principle a connection can close while it's in progress with
starting, and then it's undefined if we wait for goroutines to exit etc.
With this change, we will wait for start to complete before starting to
stop everything.
This adds the ability to have multiple concurrent connections to a single device. This is primarily useful when the network has multiple physical links for aggregated bandwidth. A single connection will never see a higher rate than a single link can give, but multiple connections are load-balanced over multiple links.
It is also incidentally useful for older multi-core CPUs, where bandwidth could be limited by the TLS performance of a single CPU core -- using multiple connections achieves concurrency in the required crypto calculations...
Co-authored-by: Simon Frei <freisim93@gmail.com>
Co-authored-by: tomasz1986 <twilczynski@naver.com>
Co-authored-by: bt90 <btom1990@googlemail.com>
Instead of separately tracking the token.
Also changes serviceMap to have a channel version of RemoveAndWait, so
that it's possible to do the removal under a lock but wait outside of
the lock. And changed where we do that in connection close, reversing
the change that happened when I added the serviceMap in 40b3b9ad1.
By creating the http.Transport and tls.Configuration ourselves we
override some default behavior and end up with a client that speaks only
HTTP/1.1.
This adds a call to http.ConfigureTransport to do the relevant magic to
enable HTTP/2.
Also tweaks the keepalive settings to be a little kinder to the
server(s).
The allowed IPv4 ranges are the same as before. But we now also accept IPv6 addresses in the ULA range FC00::/7. These addresses don't require an interface identifier and are roughly equivalent to the IPv4 private ranges.
Typical usecases:
VPN interface IPs: Wireguard, OpenVPN, Tailscale, ...
fixed IPv6 LAN addressing while the provider assigns a dynamic prefix. e.g used by pihole
https://cs.opensource.google/go/go/+/refs/tags/go1.21.0:src/net/ip.go;l=146
* lib/versioner: Factor out DefaultPath constant.
Replace several instances where .stversions is named literally to all
use the same definition in the versioner package. Exceptions are the
packages where a cyclic dependency on versioner is impossible, or some
tests which combine the versions base path with other components.
* lib/versioner: Fix comment about trash can in simple versioner.
* lib/versioner: Fix wrong versioning type string in error message.
The error message shows the folder type instead of the versioning
type, although the correct field is used in the comparison.
Safety check added in v1.23.6 introduced bug. Bug unshares folders with untrusted devices if folder does not have an encryption password set, regardless of whether the folder is shared with the untrusted device as encrypted or not. Prevents sharing with untrusted devices in some cases where sharing would be encrypted.
Patch preserves safety check but permits sharing folders with untrusted devices if they are shared as encrypted.
Signed-off-by: kewiha <keithh@protonmail.com>
Currently, historically, we look for the `X-API-Key` header to
authenticate with an API key. There's nothing wrong with this, but in
some scenarios it's easier to produce an `Authorization` header with a
`Bearer $token` content, which is nowadays more common. This change adds
support for both, so that we will accept an API key either in our custom
header or as a bearer token.
Currently, because of devices with unset RTC clock, the 100% percentile
for Uptime on [1] is calculated since the Unix epoch which is useless as
far as usage statistics are concerned. Thus, if the Syncthing start time
is set to a past date, assume that the clock is wrong and do not even
try to report the uptime.
[1] https://data.syncthing.net
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Co-authored-by: Jakob Borg <jakob@kastelo.net>
refactor: replace empty slice literal with `var`
An empty slice can be represented by `nil` or an empty slice literal. They are
functionally equivalent — their `len` and `cap` are both zero — but the `nil`
slice is the preferred style. For more information about empty slices,
see [Declaring Empty Slices](https://github.com/golang/go/wiki/CodeReviewComments#declaring-empty-slices).
Co-authored-by: deepsource-autofix[bot] <62050782+deepsource-autofix[bot]@users.noreply.github.com>
refactor: fix unused method receiver
Methods with unused receivers can be a symptom of unfinished refactoring or a bug. To keep
the same method signature, omit the receiver name or '_' as it is unused.
Co-authored-by: deepsource-autofix[bot] <62050782+deepsource-autofix[bot]@users.noreply.github.com>
refactor: unused parameter should be replaced by underscore
Unused parameters in functions or methods should be replaced with `_`
(underscore) or removed.
Co-authored-by: deepsource-autofix[bot] <62050782+deepsource-autofix[bot]@users.noreply.github.com>
This adds an environment variable STVERSIONEXTRA that, when set, gets
added to the version information in the API and GUI.
The purpose of all this is to be able to communicate something about the
bundling or packaging, through the log & GUI and the end user, to the
potential person supporting it -- i.e., us. :) A wrapper can set this
variable to indicate that Syncthing is being run via `SyncTrayzor`,
`Syncthing-macOS`, etc., and thus indicate to the end user that the GUI
they are looking at is perhaps not the only source of truth and
management for this instance.
With this change, error messages include the offending characters or
name parts. Examples:
nul.txt: name is invalid, contains Windows reserved name: "nul"
foo>bar.txt: name is invalid, contains Windows reserved character: ">"
foo \bar.txt: name is invalid, must not end in space or period on Windows
