gui, man, authors: Update docs, translations, and contributors

gui/default/assets/lang/lang-bg.json

@@ -1,136 +1,137 @@
 {
-    "A device with that ID is already added.": "Устройство с този идентификатор е вече добавено.",
-    "A negative number of days doesn't make sense.": "Няма логика в задаването на отрицателен брой дни.",
-    "A new major version may not be compatible with previous versions.": "Нова основна версия, която може да не е съвместима с предишни версии.",
+    "A device with that ID is already added.": "Устройство с този идентификатор вече е добавено.",
+    "A negative number of days doesn't make sense.": "Отрицателният брой дни е безсмислен.",
+    "A new major version may not be compatible with previous versions.": "Ново значимо издание, което може да е несъвместимо с предните издания.",
     "API Key": "Ключ за ППИ",
-    "About": "За програмата",
+    "About": "Относно",
     "Action": "Действие",
-    "Actions": "Меню",
-    "Add": "Добави",
-    "Add Device": "Добави устройство",
-    "Add Folder": "Добави папка",
+    "Actions": "Действия",
+    "Add": "Добавяне",
+    "Add Device": "Добавяне на устройство",
+    "Add Folder": "Добавяне на папка",
     "Add Remote Device": "Ново отдалечено устройство",
     "Add devices from the introducer to our device list, for mutually shared folders.": "Добавяйте устройства през поръчителите за взаимно споделени папки.",
     "Add new folder?": "Добавяне на папка?",
-    "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Също така интервалът за повторно сканиране ще бъде увеличен (60 пъти, пр. новият интервал бъде 1ч). Освен това може да го зададете и ръчно за всяка папка след като изберете Не.",
+    "Additionally the full rescan interval will be increased (times 60, i.e. new default of 1h). You can also configure it manually for every folder later after choosing No.": "Също така интервалът за повторно обхождане ще бъде увеличен (60 пъти, пр. новият интервал бъде 1ч). Освен това може да го зададете и ръчно за всяка папка след като изберете Не.",
     "Address": "Адрес",
     "Addresses": "Адреси",
-    "Advanced": "Допълнителни",
+    "Advanced": "Разширени",
     "Advanced Configuration": "Разширени настройки",
     "All Data": "Всички данни",
-    "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "Всички, споделени с това устройство папки трябва да бъдат защитени с парола, за да може данните да са недосстъпни без нея.",
+    "All folders shared with this device must be protected by a password, such that all sent data is unreadable without the given password.": "Всички, споделени с това устройство папки трябва да бъдат защитени с парола, за да може данните да са недостъпни без нея.",
     "Allow Anonymous Usage Reporting?": "Разрешаване на анонимното отчитане на употребата?",
     "Allowed Networks": "Разрешени мрежи",
     "Alphabetic": "Азбучен ред",
     "An external command handles the versioning. It has to remove the file from the shared folder. If the path to the application contains spaces, it should be quoted.": "Външна команда управлява версиите. Тя трябва да премахне файла от синхронизираната папка. Ако в пътя до приложението има интервали, то той трябва да бъде поставен в кавички.",
     "Anonymous Usage Reporting": "Анонимно отчитане на употреба",
     "Anonymous usage report format has changed. Would you like to move to the new format?": "Форматът на данните за анонимно отчитане на употреба е променен. Желаете ли да използвате него вместо стария?",
-    "Are you sure you want to continue?": "Are you sure you want to continue?",
-    "Are you sure you want to permanently delete all these files?": "Are you sure you want to permanently delete all these files?",
-    "Are you sure you want to remove device {%name%}?": "Сигурни ли сте, че искате да премахнете устройството {{name}}?",
-    "Are you sure you want to remove folder {%label%}?": "Сигурни ли сте, че искате да премахнете папката {{label}}?",
-    "Are you sure you want to restore {%count%} files?": "Сигурни ли сте, че искате да възстановите файла {{count}}?",
-    "Are you sure you want to upgrade?": "Are you sure you want to upgrade?",
+    "Are you sure you want to continue?": "Сигурни ли сте, че желаете да продължите?",
+    "Are you sure you want to permanently delete all these files?": "Сигурни ли сте, че желаете всички тези файлове да бъдат безвъзвратно премахнати?",
+    "Are you sure you want to remove device {%name%}?": "Сигурни ли сте, че желаете устройството {{name}} да бъде премахнато?",
+    "Are you sure you want to remove folder {%label%}?": "Сигурни ли сте, че желаете папката {{label}} да бъде премахната?",
+    "Are you sure you want to restore {%count%} files?": "Сигурни ли сте, че желаете {{count}} файла да бъде възстановени?",
+    "Are you sure you want to upgrade?": "Желаете ли приложението да бъде обновено?",
     "Auto Accept": "Автоматично приемане",
     "Automatic Crash Reporting": "Автоматично изпращане на доклад за срив",
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Автоматичното обновяване вече предлага избор между стабилни и предварителни издания.",
     "Automatic upgrades": "Автоматично обновяване",
     "Automatic upgrades are always enabled for candidate releases.": "Автоматичното обновяване е винаги включено за предварителните издания.",
-    "Automatically create or share folders that this device advertises at the default path.": "Автоматично създаване или споделяне на папки, които това устройство предлага в пътя по подразбиране.",
-    "Available debug logging facilities:": "Available debug logging facilities:",
+    "Automatically create or share folders that this device advertises at the default path.": "Автоматично създава в подразбираната папка или споделя папките, които устройството предлага.",
+    "Available debug logging facilities:": "Достъпни улеснения при отстраняване на дефекти:",
     "Be careful!": "Внимание!",
     "Bugs": "Дефекти",
-    "Changelog": "Списък с промени",
-    "Clean out after": "Clean out after",
+    "Changelog": "Дневник на промените",
+    "Clean out after": "Почистване след",
     "Cleaning Versions": "Cleaning Versions",
-    "Cleanup Interval": "Cleanup Interval",
-    "Click to see discovery failures": "Натиснете, за да видите грешки при откриването",
-    "Click to see full identification string and QR code.": "Щракнете, за да видите целия идентификатор и код за QR.",
+    "Cleanup Interval": "Интервал на почистване",
+    "Click to see discovery failures": "Преглед на грешки при откриване",
+    "Click to see full identification string and QR code.": "Преглед на идентификатор и код за QR.",
     "Close": "Затваряне",
     "Command": "Команда",
-    "Comment, when used at the start of a line": "Коментар, използван в началото на реда",
+    "Comment, when used at the start of a line": "Коментар, когато се използва в началото на реда",
     "Compression": "Компресиране",
     "Configured": "Настроен",
-    "Connected (Unused)": "Connected (Unused)",
-    "Connection Error": "Грешка при свързването",
-    "Connection Type": "Вид връзка",
+    "Connected (Unused)": "Свързано (неизползвано)",
+    "Connection Error": "Грешка при осъществяване на връзка",
+    "Connection Type": "Connection Type",
     "Connections": "Връзки",
     "Continuously watching for changes is now available within Syncthing. This will detect changes on disk and issue a scan on only the modified paths. The benefits are that changes are propagated quicker and that less full scans are required.": "Syncthing вече разполага с постоянно наблюдение за промени. Така се забелязват промените на дисковото устройство и се обхождат само променените папки. Ползите са, че промените се разпространяват по-бързо и с по-малко на брой пълни обхождания.",
-    "Copied from elsewhere": "Копиране от някъде другаде",
-    "Copied from original": "Копиран от оригинала",
-    "Copyright © 2014-2019 the following Contributors:": "Copyright © 2014-2019 the following Contributors:",
-    "Creating ignore patterns, overwriting an existing file at {%path%}.": "При създаване на шаблони за отхвърляне, съществуващият файл „{{path}}“ ще бъде презаписан.",
+    "Copied from elsewhere": "Копирано от някъде другаде",
+    "Copied from original": "Копирано от оригинала",
+    "Copyright © 2014-2019 the following Contributors:": "Всички права запазени © 2014-2019 за следните сътрудници:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "При създаване на шаблони за пренебрегване, съществуващият файл „{{path}}“ ще бъде презаписан.",
     "Currently Shared With Devices": "Устройства, с които е споделена",
     "Danger!": "Опасност!",
-    "Debugging Facilities": "Debugging Facilities",
-    "Default Configuration": "Default Configuration",
-    "Default Device": "Default Device",
-    "Default Folder": "Default Folder",
+    "Debugging Facilities": "Отстраняване на дефекти",
+    "Default Configuration": "Настройки по подразбиране",
+    "Default Device": "Устройство по подразбиране",
+    "Default Folder": "Папка по подразбиране",
     "Default Folder Path": "Път до папка по подразбиране",
-    "Defaults": "Defaults",
-    "Delete Unexpected Items": "Delete Unexpected Items",
+    "Defaults": "Подразбирани",
+    "Delete Unexpected Items": "Премахване на неочакваните",
     "Deleted": "Изтрито",
-    "Deselect All": "Никое",
+    "Deselect All": "Изчистване",
     "Deselect devices to stop sharing this folder with.": "Махнете отметката от устройство, за да спрете споделяне с него.",
-    "Deselect folders to stop sharing with this device.": "Deselect folders to stop sharing with this device.",
+    "Deselect folders to stop sharing with this device.": "Махнете отметката от папка, за да спрете споделяне устройствто.",
     "Device": "Устройство",
     "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Устройство \"{{name}}\" ({{device}}) с адрес {{address}} желае да се свърже. Да бъде ли добавено?",
     "Device ID": "Идентификатор на устройство",
     "Device Identification": "Идентификатор на устройство",
     "Device Name": "Име на устройството",
-    "Device is untrusted, enter encryption password": "Device is untrusted, enter encryption password",
+    "Device is untrusted, enter encryption password": "Устройството е недоверено, въведете парола за шифроване",
     "Device rate limits": "Ограничаване на скоростта",
     "Device that last modified the item": "Устройство, което последно промени обекта",
     "Devices": "Устройства",
-    "Disable Crash Reporting": "Disable Crash Reporting",
+    "Disable Crash Reporting": "Изключване на доклада за срив",
     "Disabled": "Деактивирано",
-    "Disabled periodic scanning and disabled watching for changes": "Периодичните сканирания и наблюденията за промяна са деактивирани.",
-    "Disabled periodic scanning and enabled watching for changes": "Периодичните сканирания са деактивирани , а наблюденията за промяна са активирани.",
-    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Периодичните сканирания са деактивирани и задаването на наблюдение за промени е неуспешно, ще опита пак след 1мин:",
-    "Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).": "Изключва сравняването и синхронизацията не правата на файловете. Полезно за системи с липсващи или специфични права (като FAT, exFAT, Synology, Android).",
-    "Discard": "Discard",
+    "Disabled periodic scanning and disabled watching for changes": "Изключено периодично обхождане и изключено наблюдение за промени",
+    "Disabled periodic scanning and enabled watching for changes": "Изключено периодично обхождане и включено наблюдение за промени",
+    "Disabled periodic scanning and failed setting up watching for changes, retrying every 1m:": "Изключено периодично обхождане и грешка при започване на наблюдението за промени, прави се опит всяка минута:",
+    "Disables comparing and syncing file permissions. Useful on systems with nonexistent or custom permissions (e.g. FAT, exFAT, Synology, Android).": "Изключва сравняването и синхронизацията на правата на файловете. Полезно за системи с липсващи или специфични права (като FAT, exFAT, Synology, Android).",
+    "Discard": "Отказване",
     "Disconnected": "Не е свързано",
-    "Disconnected (Unused)": "Disconnected (Unused)",
+    "Disconnected (Unused)": "Не е свързано (неизползвано)",
     "Discovered": "Открит",
     "Discovery": "Откриване",
-    "Discovery Failures": "Грешка в откриването",
+    "Discovery Failures": "Грешка при откриване",
+    "Discovery Status": "Състояние на откриване",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Без възстановяване",
     "Do not restore all": "Без възстановяване всички",
-    "Do you want to enable watching for changes for all your folders?": "Желаете ли да активирате наблюдението за промени на всички папки?",
+    "Do you want to enable watching for changes for all your folders?": "Желаете ли да наблюдението за промени да бъде включено за всички папки?",
     "Documentation": "Документация",
-    "Download Rate": "Скорост на сваляне",
+    "Download Rate": "Скорост на изтегляне",
     "Downloaded": "Изтеглен",
     "Downloading": "Изтегляне",
     "Edit": "Редактиране",
-    "Edit Device": "Промяна на устройството",
-    "Edit Device Defaults": "Подразбирани настройки на устройство",
-    "Edit Folder": "Промяна на папката",
-    "Edit Folder Defaults": "Подразбирани настройки на папка",
+    "Edit Device": "Промяна на устройство",
+    "Edit Device Defaults": "За нови устройства",
+    "Edit Folder": "Промяна на папка",
+    "Edit Folder Defaults": "За нови папки",
     "Editing {%path%}.": "Променяне на {{path}}.",
-    "Enable Crash Reporting": "Enable Crash Reporting",
-    "Enable NAT traversal": "Разреши NAT traversal",
-    "Enable Relaying": "Разреши препращане",
-    "Enabled": "Активирано",
-    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Въведете не отрицателно число (пр. \"2.35\") и изберете единица.\nПроцентите са като част от размера на цялото дисково пространство.",
-    "Enter a non-privileged port number (1024 - 65535).": "Въведете непривилегирован номер на порт (1024-65535).",
-    "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведете адреси разделени със запетая (\"tcp://ip:port\", \"tcp://host:port\") или \"dynamic\", за автоматично откриване на наличните адреси.",
-    "Enter ignore patterns, one per line.": "Добавете шаблони за игнориране, по един на ред.",
-    "Enter up to three octal digits.": "Enter up to three octal digits.",
+    "Enable Crash Reporting": "Включване на доклад за срив",
+    "Enable NAT traversal": "Enable NAT traversal",
+    "Enable Relaying": "Enable Relaying",
+    "Enabled": "Включено",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Въведете положително число (например „3.14“) и изберете единица мярка. Процентите са части от цялото дисково пространство.",
+    "Enter a non-privileged port number (1024 - 65535).": "Въведете номер на непривилегирован порт (1024-65535).",
+    "Enter comma separated (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведете адреси, разделени със запетая („tcp://ip:port“, „tcp://host:port“) или „dynamic“, за автоматично откриване на наличните адреси.",
+    "Enter ignore patterns, one per line.": "Въведете шаблони за пренебрегване, по един на ред.",
+    "Enter up to three octal digits.": "Въведете до три осмични цифри.",
     "Error": "Грешка",
     "External File Versioning": "Външно управление на версии",
-    "Failed Items": "Неуспешни",
+    "Failed Items": "Failed Items",
+    "Failed to load ignore patterns.": "Грешка при зареждане на шаблони за пренебрегване.",
     "Failed to setup, retrying": "Грешка при настройване, извършва се повторен опит",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Неуспешна връзка към IPv6 сървъри може да се очаква ако няма IPv6 свързаност.",
-    "File Pull Order": "Ред на сваляне",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Неуспешна връзка към сървъри на IPv6 може да се очаква ако няма свързаност по IPv6.",
+    "File Pull Order": "Ред на изтегляне",
     "File Versioning": "Версии на файловете",
-    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Файловете биват преместени в .stversions папка, когато са заменени или изтрити от Syncthing.",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Когато Syncthing замени или изтрие файл той бива преместен в папката .stversions и преименуван - с добавяне на дата и час.",
-    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Защитава локалните файловете от промени направени на други устройства, но промените направени на това устройство ще бъдат синхронизирани с останалите устройства.",
-    "Files are synchronized from the cluster, but any changes made locally will not be sent to other devices.": "Промените направени на други устройства ще бъдат прилагани локално, но локалните промени няма да бъдат синхронизирани с останалите устройства.",
-    "Filesystem Watcher Errors": "Filesystem Watcher Errors",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Файловете биват преместени в папка .stversions при заменяне или изтриване от Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Когато Syncthing замени или изтрие файл той бива преместен в папката .stversions и преименуван - с добавяне на датата и часа.",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Предпазва местните файлове от промени, идващи от другите устройства, но местните промени се изпращат.",
+    "Files are synchronized from the cluster, but any changes made locally will not be sent to other devices.": "Файловете се синхронизират от другите устройства, но местните промени не се изпращат.",
+    "Filesystem Watcher Errors": "Грешка при наблюдаване на файловата система",
     "Filter by date": "Филтриране по дата",
     "Filter by name": "Филтриране по име",
     "Folder": "Папка",
@@ -141,16 +142,16 @@
     "Folder type \"{%receiveEncrypted%}\" can only be set when adding a new folder.": "Вида „{{receiveEncrypted}}“ може да бъде избран само при добавяне на папка.",
     "Folder type \"{%receiveEncrypted%}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.": "Folder type \"{{receiveEncrypted}}\" cannot be changed after adding the folder. You need to remove the folder, delete or decrypt the data on disk, and add the folder again.",
     "Folders": "Папки",
-    "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.": "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.",
+    "For the following folders an error occurred while starting to watch for changes. It will be retried every minute, so the errors might go away soon. If they persist, try to fix the underlying issue and ask for help if you can't.": "Грешка при започване на наблюдението за промени на следните папки. Всяка минута ще бъде извършван нов опит, така че грешката скоро може да изчезне. Ако все пак не изчезне, отстранете нейната първопричина или потърсете помощ ако не съумявате.",
     "Full Rescan Interval (s)": "Интервал на пълно обхождане (секунди)",
-    "GUI": "Потребителски интерфейс",
+    "GUI": "Графичен интерфейс",
     "GUI Authentication Password": "Парола за интерфейса",
     "GUI Authentication User": "Потребител за интерфейса",
-    "GUI Authentication: Set User and Password": "GUI Authentication: Set User and Password",
+    "GUI Authentication: Set User and Password": "Удостоверяване графичен интерфейс: потребител и парола",
     "GUI Listen Address": "Адрес на слушане",
-    "GUI Theme": "Тема за потребителския интерфейс",
+    "GUI Theme": "Тема на графичния интерфейс",
     "General": "Общи",
-    "Generate": "Генерирай",
+    "Generate": "Подновяване",
     "Global Discovery": "Глобално откриване",
     "Global Discovery Servers": "Сървъри за глобално откриване",
     "Global State": "Глобално състояние",
@@ -158,186 +159,190 @@
     "Home page": "Страница",
     "However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.": "However, your current settings indicate you might not want it enabled. We have disabled automatic crash reporting for you.",
     "Identification": "Идентификация",
-    "If untrusted, enter encryption password": "Ако е недоверено въведете парола за шифроване",
-    "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.": "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.",
-    "Ignore": "Игнорирай",
-    "Ignore Patterns": "Шаблони за игнориране",
-    "Ignore Permissions": "Незачитане на права",
-    "Ignored Devices": "Игнорирани устройства",
-    "Ignored Folders": "Игнорирани папки",
+    "If untrusted, enter encryption password": "При недоверено задайте парола за шифроване",
+    "If you want to prevent other users on this computer from accessing Syncthing and through it your files, consider setting up authentication.": "Ако желаете да предотвратите достъпа на другите потребители на устройството до Syncthing, а чрез него и до файловете ви, помислете за удостоверяване на графичния интерфейс.",
+    "Ignore": "Пренебрегване",
+    "Ignore Patterns": "Шаблони за пренебрегване",
+    "Ignore Permissions": "Пренебрегване на права",
+    "Ignored Devices": "Пренебрегнати устройства",
+    "Ignored Folders": "Пренебрегнати папки",
     "Ignored at": "Ignored at",
-    "Incoming Rate Limit (KiB/s)": "При изтегляне (KiB/s)",
+    "Incoming Rate Limit (KiB/s)": "Ограничение при изтегляне (KiB/s)",
     "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Неправилни настройки могат да повредят файлове и да попречат на синхронизирането.",
     "Introduced By": "Предложено от",
     "Introducer": "Поръчител",
-    "Inversion of the given condition (i.e. do not exclude)": "Обратното на даденото условие (пр. не изключвай)",
-    "Keep Versions": "Пази версии",
+    "Inversion of the given condition (i.e. do not exclude)": "Обръща значението на условието (напр. да не се отхвърля)",
+    "Keep Versions": "Пазени версии",
     "LDAP": "LDAP",
-    "Largest First": " Първо най-големите",
-    "Last Scan": "Последно сканирана",
+    "Largest First": " Първо най-големи",
+    "Last Scan": "Последно обхождане",
     "Last seen": "Последно видяно",
     "Latest Change": "Последна промяна",
     "Learn more": "Научете повече",
     "Limit": "Ограничение",
-    "Listeners": "Listeners",
+    "Listener Failures": "Грешки при очакване на връзка",
+    "Listener Status": "Очакване на връзка",
+    "Listeners": "Очакване на връзка",
     "Loading data...": "Зареждане на информация...",
     "Loading...": "Зареждане...",
-    "Local Additions": "Local Additions",
-    "Local Discovery": "Local Discovery",
-    "Local State": "Local State",
-    "Local State (Total)": "Local State (Total)",
-    "Locally Changed Items": "Locally Changed Items",
+    "Local Additions": "Местно добавени",
+    "Local Discovery": "Месно откриване",
+    "Local State": "Местно състояние",
+    "Local State (Total)": "Местно състояние (общо)",
+    "Locally Changed Items": "Местно променени",
     "Log": "Дневник",
     "Log tailing paused. Scroll to the bottom to continue.": "Добавяне на редове към дневника е спряно. Плъзнете най-долу за да продължи.",
     "Logs": "Дневници",
-    "Major Upgrade": "Основно Обновяване",
-    "Mass actions": "Действия за всички",
+    "Major Upgrade": "Обновяване на значимо издание",
+    "Mass actions": "Мащабни действия",
     "Maximum Age": "Максимална възраст",
     "Metadata Only": "Само мета информация",
     "Minimum Free Disk Space": "Минимално свободно дисково пространство",
     "Mod. Device": "Променящо устройство",
     "Mod. Time": "Дата на промяна",
-    "Move to top of queue": "Премести в началото на опашката",
-    "Multi level wildcard (matches multiple directory levels)": "Маска на много нива (покрива папки с много нива)",
+    "Move to top of queue": "Преместване отпред на опашката",
+    "Multi level wildcard (matches multiple directory levels)": "Заместващ символ за няколко нива (съвпада с папки, вложени на няколко нива)",
     "Never": "никога",
     "New Device": "Ново устройство",
     "New Folder": "Нова папка",
-    "Newest First": "Първо най-новите",
+    "Newest First": "Първо най-нови",
     "No": "Не",
-    "No File Versioning": "Без версии",
-    "No files will be deleted as a result of this operation.": "Няма да бъдат изтрити файлове като резултат от тази операция.",
-    "No upgrades": "Няма обновления",
-    "Not shared": "Not shared",
+    "No File Versioning": "Без пазене на версии",
+    "No files will be deleted as a result of this operation.": "В резултат на операцията няма да бъдат премахнати файлове.",
+    "No upgrades": "Без обновяване",
+    "Not shared": "Не споделена",
     "Notice": "Известие",
-    "OK": "ОК",
+    "OK": "Добре",
     "Off": "Изключено",
-    "Oldest First": "Първо най-старите",
+    "Oldest First": "Първо най-стари",
     "Optional descriptive label for the folder. Can be different on each device.": "Незадължително име на папката. Може да бъде различно на всяко устройство.",
     "Options": "Настройки",
     "Out of Sync": "Несинхронизирано",
     "Out of Sync Items": "Несинхронизирани елементи",
-    "Outgoing Rate Limit (KiB/s)": "При качване (KiB/s)",
-    "Override Changes": "Наложи локалните промени",
+    "Outgoing Rate Limit (KiB/s)": "Ограничение при качване (KiB/s)",
+    "Override": "Налагане",
+    "Override Changes": "Налагане на местни промени",
     "Path": "Път",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Път до папката на това устройство. Ако не съществува ще бъде създадена. Символът тилда (~) може да бъде използван като заместител на",
-    "Path where new auto accepted folders will be created, as well as the default suggested path when adding new folders via the UI. Tilde character (~) expands to {%tilde%}.": "Къде да бъдат създавани, автоматично приети папки, както и предложението за път, при добавяне на нови папки от потребителският интерфейс. Символът тилда (~) ще бъде заменян с {{tilde}}.",
-    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Папка, в която да бъдат съхранявани версиите (оставете празно за подразбираната директория .stversions в споделената папка).",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Път до папката на това устройство. Ако не съществува ще бъде създадена. Символът тилда (~) може да бъде използван вместо",
+    "Path where new auto accepted folders will be created, as well as the default suggested path when adding new folders via the UI. Tilde character (~) expands to {%tilde%}.": "Къде да бъдат създавани, автоматично приетите папки, както и предложението за път, при добавяне на нови папки от графичния интерфейс. Символът тилда (~) ще бъде заменян с {{tilde}}.",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Папка, в която да бъдат запазвани версиите (оставете празно за подразбираната директория .stversions в споделената папка).",
     "Pause": "Пауза",
     "Pause All": "Пауза на всички",
     "Paused": "На пауза",
-    "Paused (Unused)": "Paused (Unused)",
-    "Pending changes": "Pending changes",
-    "Periodic scanning at given interval and disabled watching for changes": "Пълно бхождане през определен интервал, без наблюдение за промени",
-    "Periodic scanning at given interval and enabled watching for changes": "Пълно бхождане през определен интервал и наблюдение за промени",
-    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:",
-    "Permanently add it to the ignore list, suppressing further notifications.": "Permanently add it to the ignore list, suppressing further notifications.",
+    "Paused (Unused)": "На пауза (неизползвано)",
+    "Pending changes": "Незапазени промени",
+    "Periodic scanning at given interval and disabled watching for changes": "Периодично обхождане без наблюдение за промени",
+    "Periodic scanning at given interval and enabled watching for changes": "Периодично обхождане и наблюдение за промени",
+    "Periodic scanning at given interval and failed setting up watching for changes, retrying every 1m:": "Периодично обхождане и грешка при започване на наблюдението за промени, прави се опит всяка минута.",
+    "Permanently add it to the ignore list, suppressing further notifications.": "Добавяне за постоянно в списъка с пренебрегнати елементи, потискайки бъдещи известия.",
     "Permissions": "Права",
-    "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
-    "Please set a GUI Authentication User and Password in the Settings dialog.": "Задайте потребителско име и парола за потребителския интерфейс в настройките.",
-    "Please wait": "Моля изчакайте",
-    "Prefix indicating that the file can be deleted if preventing directory removal": "Представка, указваща че файлът може да бъде изтрит ако пречи на премахването на папка",
+    "Please consult the release notes before performing a major upgrade.": "Прочетете бележките по изданието преди да пристъпите към обновяване към значимо издание.",
+    "Please set a GUI Authentication User and Password in the Settings dialog.": "Задайте потребителско име и парола за графичния интерфейс в настройките.",
+    "Please wait": "Изчакайте",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Представка, указваща че файлът може да бъде изтрит ако пречи при премахване на папката",
     "Prefix indicating that the pattern should be matched without case sensitivity": "Представка, указваща че шаблонът не прави разлика в регистъра на буквите",
-    "Preparing to Sync": "Preparing to Sync",
+    "Preparing to Sync": "Подготовка за синхронизация",
     "Preview": "Преглед",
-    "Preview Usage Report": "Преглед на отчета за употребата",
+    "Preview Usage Report": "Преглед на отчет за употреба",
     "Quick guide to supported patterns": "Кратък наръчник на поддържаните шаблони",
     "Random": "Произволен",
-    "Receive Encrypted": "Receive Encrypted",
-    "Receive Only": "Само получаване",
-    "Received data is already encrypted": "Received data is already encrypted",
+    "Receive Encrypted": "Приема шифровани данни",
+    "Receive Only": "Само получава",
+    "Received data is already encrypted": "Получените данни вече са шифровани",
     "Recent Changes": "Последни промени",
-    "Reduced by ignore patterns": "Намалено посредством шаблон за отхвърляне",
+    "Reduced by ignore patterns": "Наложени са шаблони за пренебрегване",
     "Release Notes": "Бележки по изданието",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Кандидат версиите съдържат най-новата функционалност и поправки. Те са близки до традиционните дву-седмични Synchthing обновления.",
-    "Remote Devices": "Отдалачени устройства",
-    "Remote GUI": "Отдалечен ГПИ",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Предварителните издания съдържат най-новите възможности и поправки. Те са близки до традиционните, два пъти в седмицата, издания на Synchthing.",
+    "Remote Devices": "Отдалечени устройства",
+    "Remote GUI": "Отдалечен графичен интерфейс",
     "Remove": "Премахване",
     "Remove Device": "Премахване на устройство",
     "Remove Folder": "Премахване на папка",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Задължителен идентификатор на папката. Трябва е еднакъв на всички устройства.",
-    "Rescan": "Сканирай",
-    "Rescan All": "Сканирай всички",
-    "Rescans": "Повторни сканирания",
+    "Rescan": "Обхождане",
+    "Rescan All": "Обхождане всички",
+    "Rescans": "Обхождане",
     "Restart": "Рестартиране",
     "Restart Needed": "Изисква се рестартиране",
     "Restarting": "Рестартиране",
     "Restore": "Възстановяване",
     "Restore Versions": "Възстановяване на версии",
-    "Resume": "Пусни",
-    "Resume All": "Пусни всички",
+    "Resume": "Възобновяване",
+    "Resume All": "Възобновяване всички",
     "Reused": "Повторно използван",
-    "Revert Local Changes": "Revert Local Changes",
+    "Revert": "Отменяне",
+    "Revert Local Changes": "Отменяне на местни промени",
     "Save": "Запазване",
     "Scan Time Remaining": "Оставащо време до обхождане",
     "Scanning": "Обхождане",
-    "See external versioning help for supported templated command line parameters.": "Прочетете ръководството за външно управление на версии, за да се запознаете с шаблонните параметри.",
+    "See external versioning help for supported templated command line parameters.": "Прочетете ръководството за външното управление на версии, за да се запознаете с шаблонните параметри.",
     "Select All": "Всички",
     "Select a version": "Изберете версия",
     "Select additional devices to share this folder with.": "Изберете други устройства, с които да споделите с папката.",
     "Select additional folders to share with this device.": "Изберете други папки, които да споделите с устройството.",
-    "Select latest version": "Избор на най-новата версия",
-    "Select oldest version": "Избор на най-старата версия",
+    "Select latest version": "Избиране на най-новата версия",
+    "Select oldest version": "Избиране на на най-старата версия",
     "Select the folders to share with this device.": "Изберете папките, които да споделите с устройството.",
-    "Send & Receive": "Изпращане и получаване",
-    "Send Only": "Само изпращане",
+    "Send & Receive": "Изпраща и получава",
+    "Send Only": "Само изпраща",
     "Settings": "Настройки",
     "Share": "Споделяне",
     "Share Folder": "Споделяне на папка",
     "Share Folders With Device": "Споделяне на папки с устройството",
-    "Share this folder?": "Сподели тази папка?",
+    "Share this folder?": "Споделяне на папката?",
     "Shared Folders": "Споделени папки",
     "Shared With": "Споделена с",
     "Sharing": "Споделяне",
-    "Show ID": "Покажи идентификатора",
+    "Show ID": "Идентификатор",
     "Show QR": "Преглед на QR",
-    "Show detailed discovery status": "Show detailed discovery status",
-    "Show detailed listener status": "Show detailed listener status",
+    "Show detailed discovery status": "Подробно състояние на откриване",
+    "Show detailed listener status": "Подробно състояние на слушане",
     "Show diff with previous version": "Показване на разликите с предходната версия",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "В списъка на устройствата се показва вместо идентификатор. Ще бъде предложено на другите устройства като име по подразбиране.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "В списъка на устройствата се показва вместо идентификатор. Ако бъде оставено празно ще бъде променено на името, което носи устройството.",
     "Shutdown": "Изключване",
     "Shutdown Complete": "Спирането завършено",
-    "Simple File Versioning": "Опростени версии",
-    "Single level wildcard (matches within a directory only)": "Маска на едно ниво (покрива само в папка)",
+    "Simple File Versioning": "Обикновени версии",
+    "Single level wildcard (matches within a directory only)": "Заместващ символ за едно ниво (съвпада само с папка)",
     "Size": "Размер",
-    "Smallest First": "Първо най-малките",
-    "Some discovery methods could not be established for finding other devices or announcing this device:": "Some discovery methods could not be established for finding other devices or announcing this device:",
+    "Smallest First": "Първо най-малки",
+    "Some discovery methods could not be established for finding other devices or announcing this device:": "Някои методи за откриване не могат да бъдат използвани за намиране на други устройства или за обявяване на това устройство:",
     "Some items could not be restored:": "Някои елементи не могат да бъдат възстановени:",
-    "Some listening addresses could not be enabled to accept connections:": "Some listening addresses could not be enabled to accept connections:",
-    "Source Code": "Сорс код",
+    "Some listening addresses could not be enabled to accept connections:": "Някои от адресите, на които Syncthing очаква връзка не могат да бъдат настроени да получават входящи връзки.",
+    "Source Code": "Изходен код",
     "Stable releases and release candidates": "Стабилни и предварителни издания",
     "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Стабилните издания биват забавяни с две седмици. През този период те преминават през изпитване като предварителни издания.",
     "Stable releases only": "Само стабилни версии",
-    "Staggered File Versioning": "Наслагващи се версии",
-    "Start Browser": "Стартирай браузъра",
+    "Staggered File Versioning": "Разпределени версии",
+    "Start Browser": "Отваряне в мрежов четец",
     "Statistics": "Статистика",
-    "Stopped": "Не се синхронизира",
+    "Stopped": "Спряна",
     "Stores and syncs only encrypted data. Folders on all connected devices need to be set up with the same password or be of type \"{%receiveEncrypted%}\" too.": "Съхранява и синхронизира само шифровани данни. Папките на всички свързани устройства трябва да бъдат настроени със същата парола или също да са от вида „{{receiveEncrypted}}“.",
     "Support": "Помощ",
-    "Support Bundle": "Support Bundle",
-    "Sync Protocol Listen Addresses": "Адрес за слушане на синхронизиращия протокол",
+    "Support Bundle": "Архив за поддръжка",
+    "Sync Protocol Listen Addresses": "Адрес, на който слуша синхронизиращия протокол",
     "Syncing": "Синхронизиране",
-    "Syncthing has been shut down.": "Syncthing е спрян.",
+    "Syncthing has been shut down.": "Syncthing е изключен.",
     "Syncthing includes the following software or portions thereof:": "Syncthing уползотворява частично или изцяло следните софтуерни продукти:",
-    "Syncthing is Free and Open Source Software licensed as MPL v2.0.": "Syncthing is Free and Open Source Software licensed as MPL v2.0.",
-    "Syncthing is listening on the following network addresses for connection attempts from other devices:": "Syncthing is listening on the following network addresses for connection attempts from other devices:",
-    "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.": "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.",
-    "Syncthing is restarting.": "Syncthing се рестартира",
+    "Syncthing is Free and Open Source Software licensed as MPL v2.0.": "Syncthing е свободен софтуер с отворен код, под лиценза на MPL v2.0.",
+    "Syncthing is listening on the following network addresses for connection attempts from other devices:": "Syncthing очаква опити за установяване на връзка от други устройства на следните мрежови адреси:",
+    "Syncthing is not listening for connection attempts from other devices on any address.  Only outgoing connections from this device may work.": "Syncthing не слуша за опити за установяване на връзка от други устройства. Вероятно работят само изходящите връзки от това устройство.",
+    "Syncthing is restarting.": "Syncthing се рестартира.",
     "Syncthing is upgrading.": "Syncthing се обновява.",
     "Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.": "Syncthing now supports automatically reporting crashes to the developers. This feature is enabled by default.",
     "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Изглежда, че Syncthing не работи или няма достъп до интернет. Извършва се повторен опит…",
-    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing има проблем при обработването на заявката. Моля, презаредете браузъра или рестартирайте Syncthing ако проблемът продължи.",
-    "Take me back": "Take me back",
-    "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.": "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.",
-    "The Syncthing Authors": "The Syncthing Authors",
+    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing има проблем при обработването на заявката. Презаредете страницата или рестартирайте Syncthing ако проблемът продължава да съществува.",
+    "Take me back": "Назад",
+    "The GUI address is overridden by startup options. Changes here will not take effect while the override is in place.": "Адресът на интерфейса не се взима под внимание заради параметри при стартиране. Промените тук няма да бъдат отразени докато параметрите не бъдат променени.",
+    "The Syncthing Authors": "Автори на Syncthing",
     "The Syncthing admin interface is configured to allow remote access without a password.": "Администраторският панел на Syncthing разрешава дистанционен достъп без да изисква парола.",
-    "The aggregated statistics are publicly available at the URL below.": "Обобщение на събраните статистически данни ще намерите на адреса по-долу.",
-    "The cleanup interval cannot be blank.": "The cleanup interval cannot be blank.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Конфигурацията е запазена, но не е активирана. Syncthing трябва да рестартира, за да се активира новата конфигурация.",
+    "The aggregated statistics are publicly available at the URL below.": "Обобщените статистически данни са публично достъпни на адреса по-долу.",
+    "The cleanup interval cannot be blank.": "Интервалът на почистване не може да бъде празен.",
+    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.",
     "The device ID cannot be blank.": "Полето идентификатор на устройство не може да бъде празно.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Шифрованият отчет за употреба се изпраща ежедневно. Използваме го за отчитане на най-често срещаните платформи, размери на папки и издания на приложението. При промяна в събираните данни отново ще бъде поискано вашето съгласие.",
-    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведеният идентификатор на устройство не е валиден. Трябва да бъде 52 или 56 символа и да се състои от букви и цифри, като интервалите и тиретата са пожелание.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Идентификаторът на устройството, който да въведете се намира в „Действия > Идентификатор“. Интервалите и дефисите са незадължителни.",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Шифрованият отчет за употреба се изпраща ежедневно. Използва се за отчитане на най-често срещаните платформи, размери на папки и издания на приложението. При промяна в събираните данни отново ще бъде поискано вашето съгласие.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Въведеният идентификатор на устройство не е валиден. Трябва да бъде 52 или 56 символа и да се състои от букви и цифри, като интервалите и дефисите са незадължителни.",
     "The folder ID cannot be blank.": "Полето идентификатор на папка не може да бъде празно.",
     "The folder ID must be unique.": "Идентификаторът на папката трябва да бъде уникален.",
     "The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.": "The folder content on other devices will be overwritten to become identical with this device. Files not present here will be deleted on other devices.",
@@ -345,42 +350,42 @@
     "The folder path cannot be blank.": "Пътят до папката не може да бъде празен.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Използва се следния интервал: за първия час се пази версия на всеки 30 секунди, за първия ден се пази версия на всеки час, за първите 30 дена се пази версия всеки ден, до максимума се пази една версия всяка седмица.",
     "The following items could not be synchronized.": "Следните елементи не могат да бъдат синхронизирани.",
-    "The following items were changed locally.": "The following items were changed locally.",
+    "The following items were changed locally.": "Следните елементи са променени локално.",
     "The following methods are used to discover other devices on the network and announce this device to be found by others:": "The following methods are used to discover other devices on the network and announce this device to be found by others:",
-    "The following unexpected items were found.": "The following unexpected items were found.",
-    "The interval must be a positive number of seconds.": "The interval must be a positive number of seconds.",
-    "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.",
+    "The following unexpected items were found.": "Следните елементи са намерени, но не са очаквани.",
+    "The interval must be a positive number of seconds.": "Интервалът трябва да е положителен брой секунди.",
+    "The interval, in seconds, for running cleanup in the versions directory. Zero to disable periodic cleaning.": "Интервал, в секунди, на почистване на папката с версии. Нула изключва периодичното почистване.",
     "The maximum age must be a number and cannot be blank.": "Максималната възраст трябва да е число, полето не може да бъде празно.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Максималното време за пазене на версия (в дни, задайте 0 за да не бъдат изтривани версии).",
     "The number of days must be a number and cannot be blank.": "Броят дни трябва да бъде число и не може да бъде празно.",
-    "The number of days to keep files in the trash can. Zero means forever.": "Броят дни за запазване на файловете в кошчето. Нула значи завинаги.",
-    "The number of old versions to keep, per file.": "Броят стари версии, които да бъдат пазени за всеки файл.",
+    "The number of days to keep files in the trash can. Zero means forever.": "Брой дни за пазене на файловете в кошчето. Нула значи завинаги.",
+    "The number of old versions to keep, per file.": "Брой стари версии, които да бъдат пазени за всеки файл.",
     "The number of versions must be a number and cannot be blank.": "Броят версии трябва да бъде число и не може да бъде празно.",
     "The path cannot be blank.": "Пътят не може да бъде празен.",
     "The rate limit must be a non-negative number (0: no limit)": "Ограничението на скоростта трябва да бъде положително число (0: неограничено)",
-    "The rescan interval must be a non-negative number of seconds.": "Интервалът на обхождане трябва да е неотрицателен брой на секунди.",
-    "There are no devices to share this folder with.": "There are no devices to share this folder with.",
-    "There are no folders to share with this device.": "There are no folders to share with this device.",
-    "They are retried automatically and will be synced when the error is resolved.": "Ще бъдат спрени и автоматично синхронизирани, когато грешката бъде оправена.",
+    "The rescan interval must be a non-negative number of seconds.": "Интервалът на обхождане трябва да е положителен брой секунди.",
+    "There are no devices to share this folder with.": "Няма устройства, с които да споделите папката.",
+    "There are no folders to share with this device.": "Няма папка, която да споделите с устройството.",
+    "They are retried automatically and will be synced when the error is resolved.": "Ще бъдат спрени и автоматично синхронизирани, когато грешката бъде отстранена.",
     "This Device": "Това устройство",
-    "This can easily give hackers access to read and change any files on your computer.": "Така се предоставя изключително лесен достъп (четене, редактиране и изтриване) до всеки файл, на компютъра Ви.",
+    "This can easily give hackers access to read and change any files on your computer.": "This can easily give hackers access to read and change any files on your computer.",
     "This device cannot automatically discover other devices or announce its own address to be found by others.  Only devices with statically configured addresses can connect.": "This device cannot automatically discover other devices or announce its own address to be found by others.  Only devices with statically configured addresses can connect.",
-    "This is a major version upgrade.": "Това е нова основна версия.",
-    "This setting controls the free space required on the home (i.e., index database) disk.": "Тази настройка контролира нужното свободното място на основния (пр. този с базата данни) диск.",
+    "This is a major version upgrade.": "Това е обновяване на значимо издание.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Тази настройка управлява нужното свободното място на основния (пр. този с банката от данни) диск.",
     "Time": "Време",
-    "Time the item was last modified": "Часът на последна промяна на елемента",
-    "Trash Can File Versioning": "Само на файловете в кошчето",
-    "Type": "Тип",
-    "UNIX Permissions": "UNIX Permissions",
-    "Unavailable": "Не е на разположение",
-    "Unavailable/Disabled by administrator or maintainer": "Не е на разположение/Деактивриан от администраторът или поддръжника",
+    "Time the item was last modified": "Час на последна промяна на елемента",
+    "Trash Can File Versioning": "Версии от вида „кошче за отпадъци“",
+    "Type": "Вид",
+    "UNIX Permissions": "Права на UNIX",
+    "Unavailable": "Няма налични",
+    "Unavailable/Disabled by administrator or maintainer": "Недостъпно или изключено от администратора или поддръжката",
     "Undecided (will prompt)": "Неизбрано (ще попита)",
-    "Unexpected Items": "Unexpected Items",
-    "Unexpected items have been found in this folder.": "Unexpected items have been found in this folder.",
+    "Unexpected Items": "Неочаквани елементи",
+    "Unexpected items have been found in this folder.": "В папката са намерени неочаквани елементи.",
     "Unignore": "Unignore",
     "Unknown": "Неясно",
     "Unshared": "Несподелена",
-    "Unshared Devices": "Устройства, с които не е споделено",
+    "Unshared Devices": "Устройства, с които не е споделена",
     "Unshared Folders": "Несподелени папки",
     "Untrusted": "Недоверено",
     "Up to Date": "Синхронизирано",
@@ -390,43 +395,44 @@
     "Upgrading": "Обновяване",
     "Upload Rate": "Скорост на качване",
     "Uptime": "Работи от",
-    "Usage reporting is always enabled for candidate releases.": "Отчитането на употребата винаги е включено за предварителните издания.",
-    "Use HTTPS for GUI": "Потребителският интерфейс работи под HTTPS",
-    "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
+    "Usage reporting is always enabled for candidate releases.": "Отчитането на употребата винаги е включено за предварителни издания.",
+    "Use HTTPS for GUI": "Графичният интерфейс работи под HTTPS",
+    "Use notifications from the filesystem to detect changed items.": "Използва съобщения от файловата система, за да открива променени елементи.",
+    "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Няма зададени потребителско име и парола за достъп до графичния интерфейс. Помислете за създаването им.",
     "Version": "Версия",
     "Versions": "Версии",
     "Versions Path": "Път до версиите",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версиите биват изтривани автоматично, когато са по-стари от максималната възраст или надминават броя версии разрешени в даден интервал.",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
     "Waiting to Clean": "Waiting to Clean",
     "Waiting to Scan": "Waiting to Scan",
     "Waiting to Sync": "Waiting to Sync",
-    "Warning": "Warning",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Предупреждение, този път е по-горна директория на съществуващата папка \"{{otherFolder}}\".",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е по-горна директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Внимание, това е вътрешна папка на вече съществуваща папка \"{{otherFolder}}\".",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е под-директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning": "Предупреждение",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Предупреждение, този път е родителска папка съществуващата „{{otherFolder}}“.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е родителска папка съществуващата „{{otherFolderLabel}}“ ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Предупреждение, този път е подпапка съществуващата „{{otherFolder}}“.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е подпапка на съществуващата „{{otherFolderLabel}}“ ({{otherFolder}}).",
     "Warning: If you are using an external watcher like {%syncthingInotify%}, you should make sure it is deactivated.": "Предупреждение: Ако използвате външно приложение за наблюдение като {{syncthingInotify}}, трябва да го спрете.",
-    "Watch for Changes": "Watch for Changes",
-    "Watching for Changes": "Watching for Changes",
-    "Watching for changes discovers most changes without periodic scanning.": "Watching for changes discovers most changes without periodic scanning.",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяте ново устройство имайте предвид, че това устройство също трябва да бъде добавено от другата страна.",
+    "Watch for Changes": "Наблюдаване за промени",
+    "Watching for Changes": "Наблюдаване за промени",
+    "Watching for changes discovers most changes without periodic scanning.": "Наблюдението за промени открива повечето изменения без периодични обхождания.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяте ново устройство имайте предвид, че то също трябва да бъде добавено от другата страна.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Като добавяте папката имайте предвид, че той се използва за еднозначно указване на папката между устройствата. Има разлика в регистъра на знаците и трябва изцяло да съвпада между всички устройства.",
     "Yes": "Да",
-    "You can also select one of these nearby devices:": "Също така може да изберете едно от устройствата, които намират се наблизо:",
+    "You can also select one of these nearby devices:": "Също така може да изберете едно от устройствата, които се намират наблизо:",
     "You can change your choice at any time in the Settings dialog.": "Може да промените решението си по всяко време в прозореца Настройки.",
-    "You can read more about the two release channels at the link below.": "Може да научите допълнително за двата канала на версии, следвайки връзката по-долу.",
-    "You have no ignored devices.": "Няма игнорирани устройства.",
-    "You have no ignored folders.": "Няма игнорирани папки.",
-    "You have unsaved changes. Do you really want to discard them?": "Има незапазени промени. Наистина ли желаете да ги отмените?",
-    "You must keep at least one version.": "You must keep at least one version.",
-    "You should never add or change anything locally in a \"{%receiveEncrypted%}\" folder.": "You should never add or change anything locally in a \"{{receiveEncrypted}}\" folder.",
+    "You can read more about the two release channels at the link below.": "Може да научите повече за двата канала на издание, следвайки препратката по-долу.",
+    "You have no ignored devices.": "Няма пренебрегнати устройства.",
+    "You have no ignored folders.": "Няма пренебрегнати папки.",
+    "You have unsaved changes. Do you really want to discard them?": "Има незапазени промени. Желаете ли да се откажете от тях?",
+    "You must keep at least one version.": "Необходимо е да има поне една версия.",
+    "You should never add or change anything locally in a \"{%receiveEncrypted%}\" folder.": "Никога не трябва да променяте нищо в папка от вида „{{receiveEncrypted}}“.",
     "days": "дни",
-    "directories": "директории",
+    "directories": "папки",
     "files": "файла",
     "full documentation": "пълна документация",
     "items": "елемента",
     "seconds": "секунди",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} желае да сподели папката \"{{folder}}\".",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} желае да сподели папката \"{{folderlabel}}\" ({{folder}}).",
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} желае да сподели папката „{{folder}}“.",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} желае да сподели папката „{{folderlabel}}“ ({{folder}}).",
     "{%reintroducer%} might reintroduce this device.": "Поръчителят {{reintroducer}} може отново да предложи това устройство."
 }

gui/default/assets/lang/lang-ca@valencia.json

@@ -94,9 +94,9 @@
     "Discovered": "Descobert",
     "Discovery": "Descobriment",
     "Discovery Failures": "Fallades al Descobriment",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "No restaurar",
     "Do not restore all": "No restaurar en absolut",
     "Do you want to enable watching for changes for all your folders?": "Vols activar el rastreig continu de canvis per a totes les carpetes?",
@@ -122,6 +122,7 @@
     "Error": "Error",
     "External File Versioning": "Versionat extern de fitxers",
     "Failed Items": "Objectes fallits",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Errada en la configuració, reintentant",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "És possible que es produïsca una fallada al connectar als servidors IPv6 si no hi ha connectivitat IPv6.",
     "File Pull Order": "Ordre de fitxers del pull",
@@ -179,6 +180,8 @@
     "Latest Change": "Últim Canvi",
     "Learn more": "Saber més",
     "Limit": "Límit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Escoltants",
     "Loading data...": "Carregant dades...",
     "Loading...": "Carregant...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Sense sincronització",
     "Out of Sync Items": "Dispositius sense sincronitzar",
     "Outgoing Rate Limit (KiB/s)": "Límit de pujada (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Sobreescriure els canvis",
     "Path": "Ruta",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta local en l'ordinador. Es crearà si no existeix. El caràcter tilde (~) es pot utilitzar com a drecera",
@@ -266,6 +270,7 @@
     "Resume": "Continuar",
     "Resume All": "Continuar Tot",
     "Reused": "Reutilitzat",
+    "Revert": "Revert",
     "Revert Local Changes": "Revertir els canvis locals",
     "Save": "Gravar",
     "Scan Time Remaining": "Temps d'escaneig restant",
@@ -392,6 +397,7 @@
     "Uptime": "Temps de funcionament",
     "Usage reporting is always enabled for candidate releases.": "Els informes d'ús sempre estan activats per a les versions candidates.",
     "Use HTTPS for GUI": "Utilitzar HTTPS per a l'Interfície Gràfica d'Usuari (GUI)",
+    "Use notifications from the filesystem to detect changed items.": "Usar notificacions del sistema de fitxers per a detectar els ítems canviats.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Versió",
     "Versions": "Versions",

gui/default/assets/lang/lang-cs.json

@@ -94,9 +94,9 @@
     "Discovered": "Objeveno",
     "Discovery": "Objevování",
     "Discovery Failures": "Nezdary při objevování",
+    "Discovery Status": "Stav objevování",
     "Dismiss": "OK",
     "Do not add it to the ignore list, so this notification may recur.": "Nepřidávat k ignorování, takže oznámení se může opakovat.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Nepřidávat k ignorování, takže oznámení se může opakovat.",
     "Do not restore": "Neobnovit",
     "Do not restore all": "Neobnovit nic",
     "Do you want to enable watching for changes for all your folders?": "Chcete zapnout sledování změn pro všechny složky?",
@@ -122,6 +122,7 @@
     "Error": "Chyba",
     "External File Versioning": "Externí správa verzí souborů",
     "Failed Items": "Nezdařené položky",
+    "Failed to load ignore patterns.": "Načtení vzorů ignorovaného se nezdařilo.",
     "Failed to setup, retrying": "Nastavování se nezdařilo, zkouší se znovu",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Je v pořádku, když připojení k IPv6 serverům nezdaří, pokud není k dispozici IPv6 konektivita.",
     "File Pull Order": "Pořadí stahování souborů",
@@ -179,6 +180,8 @@
     "Latest Change": "Poslední změna",
     "Learn more": "Zjistěte více",
     "Limit": "Limit",
+    "Listener Failures": "Selhání při naslouchání",
+    "Listener Status": "Stav naslouchání",
     "Listeners": "Naslouchající",
     "Loading data...": "Načítání dat…",
     "Loading...": "Načítání…",
@@ -217,6 +220,7 @@
     "Out of Sync": "Nesesynchronizováno",
     "Out of Sync Items": "Nesesynchronizované položky",
     "Outgoing Rate Limit (KiB/s)": "Omezení odchozí rychlosti (KiB/s)",
+    "Override": "Přebít",
     "Override Changes": "Přebít změny na ostatních",
     "Path": "Popis umístění",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Popis umístění složky na tomto počítači. Pokud neexistuje, bude vytvořeno. Znak vlnovky (~) může být použit jako zkratka pro",
@@ -266,6 +270,7 @@
     "Resume": "Pokračovat",
     "Resume All": "Pokračovat (vše)",
     "Reused": "Opakovaně použité",
+    "Revert": "Vrátit zpět",
     "Revert Local Changes": "Vrátit lokální změny",
     "Save": "Uložit",
     "Scan Time Remaining": "Čas do dokončení skenování",
@@ -392,6 +397,7 @@
     "Uptime": "Celkový čas běhu",
     "Usage reporting is always enabled for candidate releases.": "Hlášení o používání je pro kandidáty na vydání vždy zapnuto.",
     "Use HTTPS for GUI": "Použít pro grafické rozhraní zabezpečení HTTPS",
+    "Use notifications from the filesystem to detect changed items.": "Použít oznamování soubor. systému pro nalezení změněných položek.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Pro ověřování v grafickém uživatelském rozhraní nebylo nastaveno uživatelské jméno / heslo. Prosím zvažte nastavení nějakého.",
     "Version": "Verze",
     "Versions": "Verze",
@@ -415,7 +421,7 @@
     "You can also select one of these nearby devices:": "Také můžete vybrat jedno z těchto okolních zařízení:",
     "You can change your choice at any time in the Settings dialog.": "Vaši volbu můžete kdykoliv změnit v dialogu nastavení.",
     "You can read more about the two release channels at the link below.": "O kandidátech na vydání si můžete přečíst více v odkazu níže.",
-    "You have no ignored devices.": "Nemáte žádná ignorovaná zařízení",
+    "You have no ignored devices.": "Nemáte žádná ignorovaná zařízení.",
     "You have no ignored folders.": "Nemáte žádné ignorované složky.",
     "You have unsaved changes. Do you really want to discard them?": "Máte neuložené změny. Opravdu je chcete zahodit?",
     "You must keep at least one version.": "Je třeba ponechat alespoň jednu verzi.",

gui/default/assets/lang/lang-da.json

@@ -94,9 +94,9 @@
     "Discovered": "Opdaget",
     "Discovery": "Opslag",
     "Discovery Failures": "Fejl ved opdagelse",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Forlade",
     "Do not add it to the ignore list, so this notification may recur.": "Tilføj ikke til ignore liste, så påmindelsen kan gentage.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Tilføj ikke til ignore liste, så påmindelse kan gentage.",
     "Do not restore": "Genskab ikke",
     "Do not restore all": "Genskab ikke alle",
     "Do you want to enable watching for changes for all your folders?": "Vil du aktivere løbende overvågning af ændringer for alle dine mapper?",
@@ -122,6 +122,7 @@
     "Error": "Fejl",
     "External File Versioning": "Ekstern filversionering",
     "Failed Items": "Mislykkede filer",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Opsætning mislykkedes; prøver igen",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Fejl i forbindelse med opkobling til IPv6-servere skal forventes, hvis der ikke er IPv6-forbindelse.",
     "File Pull Order": "Hentningsrækkefølge for filer",
@@ -179,6 +180,8 @@
     "Latest Change": "Seneste ændring",
     "Learn more": "Lær mere",
     "Limit": "Grænse",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Lyttere",
     "Loading data...": "Indlæser data ...",
     "Loading...": "Indlæser ...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Ikke synkroniseret",
     "Out of Sync Items": "Ikke synkroniserede filer",
     "Outgoing Rate Limit (KiB/s)": "Udgående hastighedsbegrænsning (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Overskriv ændringer",
     "Path": "Sti",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sti til den lokale mappe. Vil blive oprettet hvis den ikke findes. Tildetegnet (~) kan bruges som en forkortelse for",
@@ -266,6 +270,7 @@
     "Resume": "Genoptag",
     "Resume All": "Genoptag alt",
     "Reused": "Genbrugt",
+    "Revert": "Revert",
     "Revert Local Changes": "Opgiv lokale ændringer",
     "Save": "Gem",
     "Scan Time Remaining": "Tid tilbage af skanningen",
@@ -392,6 +397,7 @@
     "Uptime": "Oppetid",
     "Usage reporting is always enabled for candidate releases.": "Forbrugsraportering er altid aktiveret for udgivelseskandidater.",
     "Use HTTPS for GUI": "Anvend HTTPS til GUI-adgang",
+    "Use notifications from the filesystem to detect changed items.": "Benyt notifikationer fra filsystemet til at finde filændringer.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Brugernavn/adgangskode er ikke indstillet til GUI godkendelse. Overvej at konfigurere det. ",
     "Version": "Version",
     "Versions": "Versioner",

gui/default/assets/lang/lang-de.json

@@ -94,9 +94,9 @@
     "Discovered": "Ermittelt",
     "Discovery": "Gerätesuche",
     "Discovery Failures": "Gerätesuchfehler",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Ausblenden",
     "Do not add it to the ignore list, so this notification may recur.": "Nicht zur Ignorierliste hinzufügen, diese Benachrichtigung kann erneut auftauchen.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Nicht zur Ignorierliste hinzufügen, diese Benachrichtigung kann erneut auftauchen.",
     "Do not restore": "Nicht wiederherstellen",
     "Do not restore all": "Nicht alle wiederherstellen",
     "Do you want to enable watching for changes for all your folders?": "Möchten Sie das nach Änderungen für alle Ihre Ordner gesucht wird aktivieren?",
@@ -122,6 +122,7 @@
     "Error": "Fehler",
     "External File Versioning": "Externe Dateiversionierung",
     "Failed Items": "Fehlgeschlagene Elemente",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Fehler beim Installieren, versuche erneut",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Ein Verbindungsfehler zu IPv6-Servern ist zu erwarten, wenn es keine IPv6-Konnektivität gibt.",
     "File Pull Order": "Dateiübertragungsreihenfolge",
@@ -179,6 +180,8 @@
     "Latest Change": "Letzte Änderung",
     "Learn more": "Mehr erfahren",
     "Limit": "Limit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Zuhörer",
     "Loading data...": "Daten werden geladen...",
     "Loading...": "Wird geladen...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Nicht synchronisiert",
     "Out of Sync Items": "Nicht synchronisierte Elemente",
     "Outgoing Rate Limit (KiB/s)": "Ausgehendes Datenratelimit (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Änderungen überschreiben",
     "Path": "Pfad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Ordner auf dem lokalen Gerät. Ordner wird erzeugt, wenn er nicht existiert. Das Tilden-Zeichen (~) kann als Abkürzung benutzt werden für",
@@ -266,6 +270,7 @@
     "Resume": "Fortsetzen",
     "Resume All": "Alles fortsetzen",
     "Reused": "Erneut benutzt",
+    "Revert": "Revert",
     "Revert Local Changes": "Lokale Änderungen zurücksetzen",
     "Save": "Speichern",
     "Scan Time Remaining": "Verbleibende Scanzeit",
@@ -392,6 +397,7 @@
     "Uptime": "Betriebszeit",
     "Usage reporting is always enabled for candidate releases.": "Nutzungsbericht ist für Veröffentlichungskandidaten immer aktiviert.",
     "Use HTTPS for GUI": "HTTPS für Benutzeroberfläche verwenden",
+    "Use notifications from the filesystem to detect changed items.": "Benachrichtigungen des Dateisystems nutzen, um Änderungen zu erkennen.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Benutzername und Passwort für die Benutzeroberfläche sind nicht gesetzt. Setzen Sie diese zum Schutz ihrer Daten. ",
     "Version": "Version",
     "Versions": "Versionen",

gui/default/assets/lang/lang-el.json

@@ -94,9 +94,9 @@
     "Discovered": "Βάσει ανεύρεσης",
     "Discovery": "Ανεύρεση συσκευών",
     "Discovery Failures": "Αποτυχίες ανεύρεσης συσκευών",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Να μη γίνει επαναφορά",
     "Do not restore all": "Να μη γίνει επαναφορά όλων",
     "Do you want to enable watching for changes for all your folders?": "Επιθυμείτε να ενεργοποιήσετε την επιτήρηση για όλους τους φακέλους σας;",
@@ -122,6 +122,7 @@
     "Error": "Σφάλμα",
     "External File Versioning": "Εξωτερική τήρηση εκδόσεων",
     "Failed Items": "Αρχεία που απέτυχαν",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Αποτυχία ενεργοποίησης, γίνεται νέα προσπάθεια",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Είναι φυσιολογική η αποτυχία σύνδεσης σε εξυπηρετητές IPv6 όταν δεν υπάρχει συνδεσιμότητα IPv6.",
     "File Pull Order": "Σειρά με την οποία θα κατεβαίνουν τα αρχεία",
@@ -179,6 +180,8 @@
     "Latest Change": "Τελευταία αλλαγή",
     "Learn more": "Μάθετε περισσότερα",
     "Limit": "Όριο",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Ακροατές",
     "Loading data...": "Φόρτωση δεδομένων...",
     "Loading...": "Φόρτωση...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Μη συγχρονισμένα",
     "Out of Sync Items": "Μη συγχρονισμένα αντικείμενα",
     "Outgoing Rate Limit (KiB/s)": "Περιορισμός ταχύτητας αποστολής (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Να αντικατασταθούν οι αλλαγές",
     "Path": "Μονοπάτι",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Μονοπάτι του φακέλου σε αυτόν τον υπολογιστή. Αν δεν υπάρχει θα δημιουργηθεί. Η περισπωμένη (~) μπορεί να μπει σαν συντόμευση για το",
@@ -266,6 +270,7 @@
     "Resume": "Συνέχεια",
     "Resume All": "Συνέχιση όλων",
     "Reused": "Χρησιμοποιήθηκε ξανά",
+    "Revert": "Revert",
     "Revert Local Changes": "Αναίρεση τοπικών αλλαγών",
     "Save": "Αποθήκευση",
     "Scan Time Remaining": "Εναπομείναντας χρόνος για τον έλεγχο ",
@@ -392,6 +397,7 @@
     "Uptime": "Χρόνος απρόσκοπτης λειτουργίας",
     "Usage reporting is always enabled for candidate releases.": "Η αποστολή αναφορών χρήσης είναι πάντα ενεργοποιημένη στις υποψήφιες εκδόσεις.",
     "Use HTTPS for GUI": "Χρήση HTTPS για τη διεπαφή",
+    "Use notifications from the filesystem to detect changed items.": "Χρήση ειδοποιήσεων από το σύστημα αρχείων για την ανίχνευση αλλαγών.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Έκδοση",
     "Versions": "Εκδόσεις",

gui/default/assets/lang/lang-en-AU.json

@@ -94,9 +94,9 @@
     "Discovered": "Discovered",
     "Discovery": "Discovery",
     "Discovery Failures": "Discovery Failures",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Do not restore",
     "Do not restore all": "Do not restore all",
     "Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
@@ -122,6 +122,7 @@
     "Error": "Error",
     "External File Versioning": "External File Versioning",
     "Failed Items": "Failed Items",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Failed to setup, retrying",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
     "File Pull Order": "File Pull Order",
@@ -179,6 +180,8 @@
     "Latest Change": "Latest Change",
     "Learn more": "Learn more",
     "Limit": "Limit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Listeners",
     "Loading data...": "Loading data...",
     "Loading...": "Loading...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Out of Sync",
     "Out of Sync Items": "Out of Sync Items",
     "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Override Changes",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
@@ -266,6 +270,7 @@
     "Resume": "Resume",
     "Resume All": "Resume All",
     "Reused": "Reused",
+    "Revert": "Revert",
     "Revert Local Changes": "Revert Local Changes",
     "Save": "Save",
     "Scan Time Remaining": "Scan Time Remaining",
@@ -392,6 +397,7 @@
     "Uptime": "Uptime",
     "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
     "Use HTTPS for GUI": "Use HTTPS for GUI",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Version",
     "Versions": "Versions",

gui/default/assets/lang/lang-en-GB.json

@@ -94,9 +94,9 @@
     "Discovered": "Discovered",
     "Discovery": "Discovery",
     "Discovery Failures": "Discovery Failures",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Do not restore",
     "Do not restore all": "Do not restore all",
     "Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
@@ -122,6 +122,7 @@
     "Error": "Error",
     "External File Versioning": "External File Versioning",
     "Failed Items": "Failed Items",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Failed to setup, retrying",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
     "File Pull Order": "File Pull Order",
@@ -179,6 +180,8 @@
     "Latest Change": "Latest Change",
     "Learn more": "Learn more",
     "Limit": "Limit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Listeners",
     "Loading data...": "Loading data...",
     "Loading...": "Loading...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Out of Sync",
     "Out of Sync Items": "Out of Sync Items",
     "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Override Changes",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
@@ -266,6 +270,7 @@
     "Resume": "Resume",
     "Resume All": "Resume All",
     "Reused": "Reused",
+    "Revert": "Revert",
     "Revert Local Changes": "Revert Local Changes",
     "Save": "Save",
     "Scan Time Remaining": "Scan Time Remaining",
@@ -392,6 +397,7 @@
     "Uptime": "Uptime",
     "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
     "Use HTTPS for GUI": "Use HTTPS for GUI",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Version",
     "Versions": "Versions",

gui/default/assets/lang/lang-eo.json

@@ -94,9 +94,9 @@
     "Discovered": "Malkovrita",
     "Discovery": "Malkovro",
     "Discovery Failures": "Malsukcesoj de Malkovro",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Ne restarigu",
     "Do not restore all": "Ne restarigu ĉion",
     "Do you want to enable watching for changes for all your folders?": "Ĉu vi volas ebligi rigardado je ŝanĝoj por ĉiuj viaj dosierujoj?",
@@ -122,6 +122,7 @@
     "Error": "Eraro",
     "External File Versioning": "Ekstera Versionado de Dosiero",
     "Failed Items": "Malsukcesaj Eroj",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Malsukcesis agordi, provante denove",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Malsukceso por konekti al IPv6 serviloj atendante se ekzistas neniu IPv6 konektebleco.",
     "File Pull Order": "Ordo por Tiri Dosieron",
@@ -179,6 +180,8 @@
     "Latest Change": "Lasta Ŝanĝo",
     "Learn more": "Lerni pli",
     "Limit": "Limo",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Aŭskultantoj",
     "Loading data...": "Ŝarĝas datumojn...",
     "Loading...": "Ŝarĝas...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Elsinkronigita",
     "Out of Sync Items": "Elsinkronigitaj Eroj",
     "Outgoing Rate Limit (KiB/s)": " Eliranta Rapideco Limo (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Transpasi Ŝanĝojn",
     "Path": "Vojo",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Vojo de la dosierujo en la loka komputilo. Kreiĝos se ne ekzistas. La tilda signo (~) povas esti uzata kiel mallongigilo por",
@@ -266,6 +270,7 @@
     "Resume": "Daŭrigu",
     "Resume All": "Daŭrigu Ĉion",
     "Reused": "Reuzita",
+    "Revert": "Revert",
     "Revert Local Changes": "Reverti Lokajn Ŝangojn",
     "Save": "Konservu",
     "Scan Time Remaining": "Restanta Tempo de Skano",
@@ -392,6 +397,7 @@
     "Uptime": "Daŭro de funkciado",
     "Usage reporting is always enabled for candidate releases.": "Uzada raportado ĉiam ŝaltita por kandidataj eldonoj.",
     "Use HTTPS for GUI": "Uzi HTTPS por grafika interfaco.",
+    "Use notifications from the filesystem to detect changed items.": "Uzi sciigoj de la dosiersistemo por detekti ŝanĝitajn erojn.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Versio",
     "Versions": "Versioj",

gui/default/assets/lang/lang-es-ES.json

@@ -94,9 +94,9 @@
     "Discovered": "Descubierto",
     "Discovery": "Descubrimiento",
     "Discovery Failures": "Fallos de Descubrimiento",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "No restaurar",
     "Do not restore all": "No restaurar todo",
     "Do you want to enable watching for changes for all your folders?": "Quieres activar la vigilancia de cambios para todas tus carpetas?",
@@ -122,6 +122,7 @@
     "Error": "Error",
     "External File Versioning": "Versionado externo de fichero",
     "Failed Items": "Elementos fallidos",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Fallo al configurar, reintentando",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Se espera un fallo al conectar a los servidores IPv6 si no hay conectividad IPv6.",
     "File Pull Order": "Orden de obtención de los ficheros",
@@ -179,6 +180,8 @@
     "Latest Change": "Último Cambio",
     "Learn more": "Saber más",
     "Limit": "Límite",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Oyentes",
     "Loading data...": "Cargando datos...",
     "Loading...": "Cargando...",
@@ -217,6 +220,7 @@
     "Out of Sync": "No sincronizado",
     "Out of Sync Items": "Elementos no sincronizados",
     "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Anular cambios",
     "Path": "Parche",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
@@ -266,6 +270,7 @@
     "Resume": "Continuar",
     "Resume All": "Continuar todo",
     "Reused": "Reutilizado",
+    "Revert": "Revert",
     "Revert Local Changes": "Revertir los cambios locales",
     "Save": "Guardar",
     "Scan Time Remaining": "Tiempo Restante de Escaneo",
@@ -392,6 +397,7 @@
     "Uptime": "Tiempo de funcionamiento",
     "Usage reporting is always enabled for candidate releases.": "El informe de uso está siempre habilitado en las versiones candidatas.",
     "Use HTTPS for GUI": "Usar HTTPS para la Interfaz Gráfica de Usuario (GUI)",
+    "Use notifications from the filesystem to detect changed items.": "Usar notificaciones del sistema de ficheros para detectar los ítems cambiados.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Usuario/Contraseña no establecida para la autenticación de la GUI. Por favor, considere establecerla.",
     "Version": "Versión",
     "Versions": "Versiones",

gui/default/assets/lang/lang-es.json

@@ -94,9 +94,9 @@
     "Discovered": "Descubierto",
     "Discovery": "Descubrimiento",
     "Discovery Failures": "Fallos de Descubrimiento",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "No restaurar",
     "Do not restore all": "No restaurar todos",
     "Do you want to enable watching for changes for all your folders?": "¿Deseas activar el control de cambios en todas tus carpetas?",
@@ -122,6 +122,7 @@
     "Error": "Error",
     "External File Versioning": "Versionado externo de fichero",
     "Failed Items": "Elementos fallidos",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Fallo en la configuración, reintentando",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Se espera un fallo al conectar a los servidores IPv6 si no hay conectividad IPv6.",
     "File Pull Order": "Orden de Obtención de los Archivos",
@@ -179,6 +180,8 @@
     "Latest Change": "Último Cambio",
     "Learn more": "Saber más",
     "Limit": "Límite",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Oyentes",
     "Loading data...": "Cargando datos...",
     "Loading...": "Cargando...",
@@ -217,6 +220,7 @@
     "Out of Sync": "No sincronizado",
     "Out of Sync Items": "Elementos no sincronizados",
     "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Anular cambios",
     "Path": "Ruta",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
@@ -266,6 +270,7 @@
     "Resume": "Continuar",
     "Resume All": "Continuar todo",
     "Reused": "Reutilizado",
+    "Revert": "Revert",
     "Revert Local Changes": "Revertir Cambios Locales",
     "Save": "Guardar",
     "Scan Time Remaining": "Tiempo Restante de Escaneo",
@@ -392,6 +397,7 @@
     "Uptime": "Tiempo de funcionamiento",
     "Usage reporting is always enabled for candidate releases.": "El informe de uso está siempre habilitado en las versiones candidatas.",
     "Use HTTPS for GUI": "Usar HTTPS para la Interfaz Gráfica de Usuario (GUI)",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "No se ha configurado el nombre de usuario/la contraseña para la autenticación de la GUI. Por favor, considere configurarlos.",
     "Version": "Versión",
     "Versions": "Versiones",

gui/default/assets/lang/lang-eu.json

@@ -94,9 +94,9 @@
     "Discovered": "Agertua",
     "Discovery": "Agertzea",
     "Discovery Failures": "Agertze hutsegiteak",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Ez berrezarri",
     "Do not restore all": "Ez berrezarri denak",
     "Do you want to enable watching for changes for all your folders?": "Zure karpeta guztietan aldaketen kontrola aktibatu nahi duzu?",
@@ -122,6 +122,7 @@
     "Error": "Hutsa",
     "External File Versioning": "Fitxategi bertsioen kanpoko kudeaketa",
     "Failed Items": "Huts egin duten fitxategiak",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Konfigurazioan huts egitea, berriro saiatuz",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "IPv6 zerbitzariei buruzko konexioak huts eginen du, IPv6 konektibitaterik ez bada",
     "File Pull Order": "Fitxategiak berreskuratzeko ordena",
@@ -179,6 +180,8 @@
     "Latest Change": "Azken aldaketa",
     "Learn more": "Gehiago jakiteko",
     "Limit": "Muga",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Entzungailuak",
     "Loading data...": "Datuak kargatzen...",
     "Loading...": "Kargatzen...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Ez sinkronizatua",
     "Out of Sync Items": "Ez sinkronizatu elementuak",
     "Outgoing Rate Limit (KiB/s)": "Bidaltze emari gehienekoa (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Aldaketak desegin",
     "Path": "Bidexka",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Lekuko tresnaren partekatzeari buruzko bidea. Ez balitz, asmatu beharko da bat. Programarenari, baitezpadako bide bat sartzen ahal duzu (adibidez \"/home/ni/Sync/Etsenplua\") edo bestenaz bide errelatibo bat (adibidez \"..\\Partekatzeak\\Etsenplua\" - instalazio mugikor batentzat baliagarria). Tildea (~, edo ~+Espazioa Windows XP+Azerty-n) erabil litzateke laburbide gisa",
@@ -266,6 +270,7 @@
     "Resume": "Berriz hastea",
     "Resume All": "Dena berriz hastea",
     "Reused": "Berriz erabilia",
+    "Revert": "Revert",
     "Revert Local Changes": "Bertan behera utzi aldaketa lokalak",
     "Save": "Grabatu",
     "Scan Time Remaining": "Gelditzen den azterketa denbora",
@@ -392,6 +397,7 @@
     "Uptime": "Erabiltze denbora",
     "Usage reporting is always enabled for candidate releases.": "Erabiltze estatiskitak aintzin-bertsioetan beti igorriak dira",
     "Use HTTPS for GUI": "HTTPS-a erabil ezazu GUI-arentzat",
+    "Use notifications from the filesystem to detect changed items.": "Erabili fitxategi sistemaren jakinarazpenak aldatutako elementuak atzemateko",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Erabiltzaile-izena / pasahitza ez da konfiguratu interfaze grafikora sartzeko autentifikaziorako. Mesedez, konfiguratu.",
     "Version": "Bertsioa",
     "Versions": "Bertsioak",

gui/default/assets/lang/lang-fi.json

@@ -94,9 +94,9 @@
     "Discovered": "Löydetty",
     "Discovery": "Etsintä",
     "Discovery Failures": "Etsinnässä tapahtuneet virheet",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Älä palauta",
     "Do not restore all": "Älä palauta kaikkia",
     "Do you want to enable watching for changes for all your folders?": "Haluatko aktivoida jatkuvan muutoksien seurannan kaikkiin kansioihin?",
@@ -122,6 +122,7 @@
     "Error": "Virhe",
     "External File Versioning": "Ulkoinen tiedostoversionti",
     "Failed Items": "Epäonnistuneet kohteet",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Käyttöönotto epäonnistui. Yritetään uudelleen.",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Yhteys IPv6-palvelimiin todennäköisesti epäonnistuu, koska IPv6-yhteyksiä ei ole.",
     "File Pull Order": "Tiedostojen noutojärjestys",
@@ -179,6 +180,8 @@
     "Latest Change": "Viimeisin muutos",
     "Learn more": "Lisätietoja",
     "Limit": "Rajoita",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Kuuntelijat",
     "Loading data...": "Lataa...",
     "Loading...": "Lataa...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Ei ajan tasalla",
     "Out of Sync Items": "Kohteet, jotka eivät ole ajan tasalla",
     "Outgoing Rate Limit (KiB/s)": "Uloslähtevän liikenteen rajoitus (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Ohita muutokset",
     "Path": "Polku",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Polku kansioon paikallisella tietokoneella. Kansio luodaan, ellei sitä ole olemassa. Tilde-merkkiä (~) voidaan käyttää oikotienä polulle",
@@ -266,6 +270,7 @@
     "Resume": "Jatka",
     "Resume All": "Jatka kaikki",
     "Reused": "Uudelleenkäytetty",
+    "Revert": "Revert",
     "Revert Local Changes": "Palauta paikalliset muutokset",
     "Save": "Tallenna",
     "Scan Time Remaining": "Skannausaikaa jäljellä",
@@ -392,6 +397,7 @@
     "Uptime": "Päälläoloaika",
     "Usage reporting is always enabled for candidate releases.": "Käytön raportointi on aina käytössä testiversioissa.",
     "Use HTTPS for GUI": "Käytä HTTPS:ää GUI:n kanssa",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Versio",
     "Versions": "Versiot",

gui/default/assets/lang/lang-fr.json

@@ -94,9 +94,9 @@
     "Discovered": "Découvert",
     "Discovery": "Découverte",
     "Discovery Failures": "Échecs de découverte",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Écarter",
     "Do not add it to the ignore list, so this notification may recur.": "Ne pas l'ajouter à la liste à ignorer, pour que cette notification puisse réapparaître.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Ne pas l'ajouter à la liste à ignorer, pour que cette notification puisse réapparaître.",
     "Do not restore": "Ne pas restaurer",
     "Do not restore all": "Ne pas tout restaurer",
     "Do you want to enable watching for changes for all your folders?": "Voulez-vous activer la surveillance des changements sur tous vos partages ?",
@@ -122,6 +122,7 @@
     "Error": "Erreur",
     "External File Versioning": "Gestion externe des versions de fichiers",
     "Failed Items": "Éléments en échec",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Échec, nouvel essai",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "La connexion aux serveurs en IPv6 va échouer s'il n'y a pas de connectivité IPv6.",
     "File Pull Order": "Ordre de récupération des fichiers",
@@ -179,6 +180,8 @@
     "Latest Change": "Dernier changement",
     "Learn more": "En savoir plus",
     "Limit": "Limite",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Systèmes en écoute",
     "Loading data...": "Chargement des données...",
     "Loading...": "Chargement...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Désynchronisé",
     "Out of Sync Items": "Éléments non synchronisés",
     "Outgoing Rate Limit (KiB/s)": "Limite du débit d'envoi (Kio/s)",
+    "Override": "Override",
     "Override Changes": "Écraser les changements",
     "Path": "Chemin",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Dans l'écran de \"Personnalisation\" des valeurs par défaut (menu Actions/Configuration), ce champ indique le chemin dans lequel les partages acceptés automatiquement seront créés, ainsi que chemin de base suggéré lors de l'enregistrement des nouveaux partages. Le caractère tilde (~) est un raccourci pour votre répertoire personnel {{tilde}} .\nEn création/acceptation manuelle d'un nouveau partage, c'est le chemin vers le répertoire à partager dans l'appareil local. Il sera créé s'il n'existe pas. Vous pouvez entrer un chemin absolu (p.ex \"/home/moi/Sync/Exemple\") ou relatif à celui du programme (p.ex \"..\\Partages\\Exemple\" - utile pour installation portable). Le caractère tilde (~, taper ~+Espace sous Windows) peut être utilisé comme raccourci vers",
@@ -266,6 +270,7 @@
     "Resume": "Reprise",
     "Resume All": "Tout libérer",
     "Reused": "Réutilisé",
+    "Revert": "Revert",
     "Revert Local Changes": "Annuler les modifications locales",
     "Save": "Enregistrer",
     "Scan Time Remaining": "Temps d'analyse restant",
@@ -392,6 +397,7 @@
     "Uptime": "Durée de fonctionnement",
     "Usage reporting is always enabled for candidate releases.": "L'envoi des statistiques d'utilisation est obligatoirement actif pour les versions préliminaires.",
     "Use HTTPS for GUI": "Utiliser l'HTTPS pour le GUI",
+    "Use notifications from the filesystem to detect changed items.": "Utiliser les notifications du système de fichiers pour détecter les éléments modifiés.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Utilisateur/Mot de passe n'ont pas été définis pour l'accès à l'interface graphique. Envisagez de le faire.",
     "Version": "Version",
     "Versions": "Restauration...",

gui/default/assets/lang/lang-fy.json

@@ -94,9 +94,9 @@
     "Discovered": "Untdekt",
     "Discovery": "Untdekking",
     "Discovery Failures": "Untdekkingsflaters",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Net tebeksette",
     "Do not restore all": "Hielendal net tebeksette",
     "Do you want to enable watching for changes for all your folders?": "Wolle jo it konstant byhâlden fan feroarings foar al jo mappen oansette?",
@@ -122,6 +122,7 @@
     "Error": "Flater",
     "External File Versioning": "Ekstern ferzjebehear foar triemen",
     "Failed Items": "Mislearre items",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Ynskeakeljen mislearre, wurd no opnij besocht",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Mislearjen fan it ferbinen mei IPv6-tsjinners wurd ferwachte as der gjin stipe foar IPv6-ferbinings is.",
     "File Pull Order": "Triemlûkfolchoarder",
@@ -179,6 +180,8 @@
     "Latest Change": "Meast Resinte Feroarings",
     "Learn more": "Mear witte",
     "Limit": "Limyt",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Harkers",
     "Loading data...": "Data oan it laden...",
     "Loading...": "Oan it laden...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Net syngronisearre",
     "Out of Sync Items": "Net syngronisearre items",
     "Outgoing Rate Limit (KiB/s)": "Uploadfluggenslimyt (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Feroarings oerskriuwe",
     "Path": "Paad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Paad nei de map op de lokale kompjûter. Wurd oanmakke as dizze net bestiet. It tilde teken (~) kin brûkt wurde as fluchkeppeling foar",
@@ -266,6 +270,7 @@
     "Resume": "Trochgean",
     "Resume All": "Alles trochgean litte",
     "Reused": "Opnij brûkt",
+    "Revert": "Revert",
     "Revert Local Changes": "Lokale Feroarings Weromsette",
     "Save": "Bewarje",
     "Scan Time Remaining": "Oerbleaune skentiid",
@@ -392,6 +397,7 @@
     "Uptime": "Rintiid",
     "Usage reporting is always enabled for candidate releases.": "Brûkersrapportaazje stiet altyd oan foar ferzje kandidaten.",
     "Use HTTPS for GUI": "Brûk HTTPS foar GUI",
+    "Use notifications from the filesystem to detect changed items.": "Brûk notifikaasjes fan it triemsysteem om feroare items te detektearjen.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Brûkersnamme / wachtwurd is net ynsteld foar de GUI-ferifikaasje. Tink der asjebleaft oer nei om dit yn te stellen.",
     "Version": "Ferzje",
     "Versions": "Ferzjes",

gui/default/assets/lang/lang-hu.json

@@ -94,9 +94,9 @@
     "Discovered": "Felfedezett",
     "Discovery": "Felfedezés",
     "Discovery Failures": "Felfedezési hibák",
+    "Discovery Status": "Felfedezési állapot",
     "Dismiss": "Elutasítás",
     "Do not add it to the ignore list, so this notification may recur.": "Ne vegye fel a mellőzési listára, így ez az értesítés megismétlődhet. ",
-    "Do not add it to the ignore list, so this notification may recurr.": "Ne vegye fel a mellőzési listára, így ez az értesítés megismétlődhet. ",
     "Do not restore": "Ne legyen visszaállítva",
     "Do not restore all": "Semmit se állítson vissza",
     "Do you want to enable watching for changes for all your folders?": "Minden mappára bekapcsolható a változásfigyelés?",
@@ -122,6 +122,7 @@
     "Error": "Hiba",
     "External File Versioning": "Külső fájlverzió-követés",
     "Failed Items": "Hibás elemek",
+    "Failed to load ignore patterns.": "Nem sikerült betölteni a mellőzési mintákat.",
     "Failed to setup, retrying": "Telepítés nem sikerült, újrapróbálkozás",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Mivel nincs IPv6 kapcsolat, ezért várhatóan nem fog sikerülni IPv6-os szerverekhez csatlakozni.",
     "File Pull Order": "Fájlküldési sorrend",
@@ -179,6 +180,8 @@
     "Latest Change": "Utolsó módosítás",
     "Learn more": "Tudj meg többet",
     "Limit": "Sebességkorlát",
+    "Listener Failures": "Figyelő hibák",
+    "Listener Status": "Figyelő állapot",
     "Listeners": "Figyelők",
     "Loading data...": "Adatok betöltése...",
     "Loading...": "Betöltés...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Nincs szinkronban",
     "Out of Sync Items": "Nem szinkronizált elemek",
     "Outgoing Rate Limit (KiB/s)": "Kimenő sebességkorlát (KiB/mp)",
+    "Override": "Felülírrás",
     "Override Changes": "Változtatások felülbírálása",
     "Path": "Útvonal",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "A mappa elérési útvonala az eszközön. Amennyiben nem létezik, a program automatikusan létrehozza. A hullámvonal (~)  a következő helyettesítésre használható: ",
@@ -266,6 +270,7 @@
     "Resume": "Folytatás",
     "Resume All": "Mindent folytat",
     "Reused": "Újrafelhasználva",
+    "Revert": "Visszaállítás",
     "Revert Local Changes": "Helyi módosítások visszavonása",
     "Save": "Mentés",
     "Scan Time Remaining": "Fennmaradó átnézési idő",
@@ -392,6 +397,7 @@
     "Uptime": "Üzemidő",
     "Usage reporting is always enabled for candidate releases.": "Az előzetes kiadásokban a használati jelentés mindig engedélyezett.",
     "Use HTTPS for GUI": "HTTPS használata a grafikus felülethez",
+    "Use notifications from the filesystem to detect changed items.": "A fájlrendszer által szolgáltatott értesítések alkalmazása a megváltozott elemek keresésére.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Még nincs felhasználó és jelszó beállítva a grafikus felülethez. Érdemes megfontolni a beállítását.",
     "Version": "Verzió",
     "Versions": "Verziók",

gui/default/assets/lang/lang-it.json

@@ -94,9 +94,9 @@
     "Discovered": "Individuato",
     "Discovery": "Individuazione",
     "Discovery Failures": "Individuazione fallita",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Non aggiungerlo all'elenco da ignorare, quindi questa notifica potrebbe ripresentarsi.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Non ripristinare",
     "Do not restore all": "Non ripristinare tutto",
     "Do you want to enable watching for changes for all your folders?": "Vuoi abilitare il monitoraggio delle modifiche per tutte le tue cartelle?",
@@ -122,6 +122,7 @@
     "Error": "Errore",
     "External File Versioning": "Controllo Versione Esterno",
     "Failed Items": "Elementi Errati",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Configurazione fallita, riprovo",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "La connessione a server IPv6 fallisce se non c'è connettività IPv6.",
     "File Pull Order": "Ordine Prelievo File",
@@ -179,6 +180,8 @@
     "Latest Change": "Ultima Modifica",
     "Learn more": "Per saperne di più",
     "Limit": "Limite",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "In Ascolto",
     "Loading data...": "Caricamento dati...",
     "Loading...": "Caricamento...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Non sincronizzato",
     "Out of Sync Items": "Elementi Non Sincronizzati",
     "Outgoing Rate Limit (KiB/s)": "Limite Velocità in Uscita (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Ignora le Modifiche",
     "Path": "Percorso",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Percorso della cartella nel computer locale. Verrà creata se non esiste già. Il carattere tilde (~) può essere utilizzato come scorciatoia per",
@@ -266,6 +270,7 @@
     "Resume": "Riprendi",
     "Resume All": "Riprendi Tutti",
     "Reused": "Riutilizzato",
+    "Revert": "Revert",
     "Revert Local Changes": "Ripristina le modifiche locali",
     "Save": "Salva",
     "Scan Time Remaining": "Tempo di Scansione Rimanente",
@@ -392,6 +397,7 @@
     "Uptime": "Tempo di Funzionamento",
     "Usage reporting is always enabled for candidate releases.": "Le segnalazioni di utilizzo sono sempre abilitate le versioni candidate al rilascio.",
     "Use HTTPS for GUI": "Utilizza HTTPS per l'interfaccia grafica",
+    "Use notifications from the filesystem to detect changed items.": "Usa le notifiche dal filesystem per rilevare gli elementi modificati.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Utente/password non sono stati impostati per autenticazione GUI. Considerane la configurazione.",
     "Version": "Versione",
     "Versions": "Versioni",

gui/default/assets/lang/lang-ja.json

@@ -94,9 +94,9 @@
     "Discovered": "探索結果",
     "Discovery": "探索サーバー",
     "Discovery Failures": "探索サーバーへの接続失敗",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Do not restore",
     "Do not restore all": "Do not restore all",
     "Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
@@ -122,6 +122,7 @@
     "Error": "エラー",
     "External File Versioning": "外部バージョン管理",
     "Failed Items": "失敗した項目",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Failed to setup, retrying",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "お使いのネットワークがIPv6を利用していない場合、IPv6のサーバーへの接続に失敗しても異常ではありません。",
     "File Pull Order": "ファイルを取得する順序",
@@ -179,6 +180,8 @@
     "Latest Change": "最終変更内容",
     "Learn more": "詳細を確認する",
     "Limit": "制限",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "待ち受けポート",
     "Loading data...": "データの読み込み中...",
     "Loading...": "読み込み中...",
@@ -217,6 +220,7 @@
     "Out of Sync": "未同期",
     "Out of Sync Items": "同期の必要な項目",
     "Outgoing Rate Limit (KiB/s)": "上り帯域制限 (KiB/s)",
+    "Override": "Override",
     "Override Changes": "他のデバイスの変更を上書きする",
     "Path": "パス",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "ローカルコンピュータ上のフォルダーパス。フォルダーが存在しない場合は作成されます。チルダ (~) で以下のフォルダーを短縮入力できます:",
@@ -266,6 +270,7 @@
     "Resume": "再開",
     "Resume All": "すべて再開",
     "Reused": "中断後再利用",
+    "Revert": "Revert",
     "Revert Local Changes": "Revert Local Changes",
     "Save": "保存",
     "Scan Time Remaining": "スキャン残り時間",
@@ -392,6 +397,7 @@
     "Uptime": "稼働時間",
     "Usage reporting is always enabled for candidate releases.": "リリース候補版では常に使用状況レポートが送信されます。",
     "Use HTTPS for GUI": "GUIにHTTPSを使用する",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "バージョン",
     "Versions": "バージョン",

gui/default/assets/lang/lang-ko-KR.json

@@ -94,9 +94,9 @@
     "Discovered": "탐색됨",
     "Discovery": "탐색",
     "Discovery Failures": "탐색 실패",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "복구 하지 않기",
     "Do not restore all": "모두 복구 하지 않기",
     "Do you want to enable watching for changes for all your folders?": "변경 사항 감시를 당신의 모든 폴더에서 활성화 하는걸 원하시나요?",
@@ -122,6 +122,7 @@
     "Error": "오류",
     "External File Versioning": "외부 파일 버전 관리",
     "Failed Items": "실패한 항목",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "설정 적용 실패, 재시도 중",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "IPv6 네트워크에 연결되지 않은 경우 IPv6 서버에 연결 할 수 없습니다.",
     "File Pull Order": "파일 동기화 순서",
@@ -179,6 +180,8 @@
     "Latest Change": "최신 변경",
     "Learn more": "더 알아보기",
     "Limit": "제한",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "수신자",
     "Loading data...": "데이터 불러오는중...",
     "Loading...": "불러오는 중...",
@@ -217,6 +220,7 @@
     "Out of Sync": "동기화 오류",
     "Out of Sync Items": "동기화되지 않은 항목",
     "Outgoing Rate Limit (KiB/s)": "업로드 속도 제한 (KiB/s)",
+    "Override": "Override",
     "Override Changes": "덮어쓰기",
     "Path": "경로",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "로컬 컴퓨터에 있는 폴더의 경로를 지정합니다. 존재하지 않는 폴더일 경우 자동으로 생성됩니다. 물결 기호 (~)는 아래와 같은 폴더를 나타냅니다.",
@@ -266,6 +270,7 @@
     "Resume": "재개",
     "Resume All": "모두 재개",
     "Reused": "재개",
+    "Revert": "Revert",
     "Revert Local Changes": "로컬 변경 항목 복원",
     "Save": "저장",
     "Scan Time Remaining": "탐색 남은 시간",
@@ -392,6 +397,7 @@
     "Uptime": "가동 시간",
     "Usage reporting is always enabled for candidate releases.": "출시 후보 버전에서는 사용 보고서가 항상 활성화 됩니다.",
     "Use HTTPS for GUI": "GUI에서 HTTPS 프로토콜 사용",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "버전",
     "Versions": "버전",

gui/default/assets/lang/lang-lt.json

@@ -94,9 +94,9 @@
     "Discovered": "Atrastas",
     "Discovery": "Lokacija",
     "Discovery Failures": "Matomumo nesėkmės",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Neatkurti",
     "Do not restore all": "Neatkurti visus",
     "Do you want to enable watching for changes for all your folders?": "Ar norite įjungti pakeitimų stebėjimą visiems savo aplankams?",
@@ -122,6 +122,7 @@
     "Error": "Klaida",
     "External File Versioning": "Išorinis versijų valdymas",
     "Failed Items": "Nepavykę siuntimai",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Nepavyko nustatyti, bandoma iš naujo",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Nesėkmė prisijungti prie IPv6 serverių yra tikėtina, jei nėra IPv6 ryšio.",
     "File Pull Order": "Failų siuntimo tvarka",
@@ -179,6 +180,8 @@
     "Latest Change": "Paskutinis pakeitimas",
     "Learn more": "Sužinoti daugiau",
     "Limit": "Apribojimas",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Klausytojai",
     "Loading data...": "Įkeliami duomenys...",
     "Loading...": "Įkeliama...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Išsisinchronizavę",
     "Out of Sync Items": "Nesutikrinta",
     "Outgoing Rate Limit (KiB/s)": "Išsiunčiamo srauto maksimalus greitis (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Perrašyti pakeitimus",
     "Path": "Kelias",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Kelias iki aplanko šiame kompiuteryje. Bus sukurtas, jei neegzistuoja. Tildės simbolis (~) gali būti naudojamas kaip trumpinys",
@@ -266,6 +270,7 @@
     "Resume": "Pratęsti",
     "Resume All": "Pratęsti visus",
     "Reused": "Pakartotinas",
+    "Revert": "Revert",
     "Revert Local Changes": "Sugrąžinti vietinius pakeitimus",
     "Save": "Išsaugoti",
     "Scan Time Remaining": "Likęs nuskaitymo laikas",
@@ -392,6 +397,7 @@
     "Uptime": "Veiksnumo laikas",
     "Usage reporting is always enabled for candidate releases.": "Naudojimo ataskaita kandidatinėms versijoms visada yra įjungta.",
     "Use HTTPS for GUI": "Valdymo skydeliui naudoti saugų ryšį ",
+    "Use notifications from the filesystem to detect changed items.": "Naudoti pranešimus iš failų sistemos, norint aptikti pakeistus elementus.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Valdymo skydelio tapatybės nustatymui nebuvo nustatytas vartotojo vardas/slaptažodis. Apsvarstykite galimybę jį nusistatyti.",
     "Version": "Versija",
     "Versions": "Versijos",

gui/default/assets/lang/lang-nb.json

@@ -94,9 +94,9 @@
     "Discovered": "Oppdaget",
     "Discovery": "Oppslag",
     "Discovery Failures": "Oppslagsfeil",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Ikke gjenopprett",
     "Do not restore all": "Ikke gjenopprett alle",
     "Do you want to enable watching for changes for all your folders?": "Ønsker du å skru på oppsyn med endringer for alle dine mapper?",
@@ -122,6 +122,7 @@
     "Error": "Feilmelding",
     "External File Versioning": "Ekstern versjonskontroll",
     "Failed Items": "Elementsynkronisering som har mislyktes",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Klarte ikke å utføre oppsett, prøver igjen",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Å ikke klare å koble til IPv6-tjenere er forventet hvis det ikke er noen IPv6-tilknytning.",
     "File Pull Order": "Filenes henterekkefølge",
@@ -179,6 +180,8 @@
     "Latest Change": "Sist endret",
     "Learn more": "Lær mer",
     "Limit": "Grense",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Lyttere",
     "Loading data...": "Laster inn data…",
     "Loading...": "Laster…",
@@ -217,6 +220,7 @@
     "Out of Sync": "Ikke synkronisert",
     "Out of Sync Items": "Usynkroniserte elementer",
     "Outgoing Rate Limit (KiB/s)": "Utgående hastighetsbegrensning (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Overstyr endringer",
     "Path": "Sti",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Plasseringen av mappen på datamaskinen. Denne vil bli opprettet dersom den ikke finnes. Krøllstrektegnet (~) kan brukes som forkortelse for",
@@ -266,6 +270,7 @@
     "Resume": "Gjenoppta",
     "Resume All": "Gjenoppta alt",
     "Reused": "Gjenbrukt",
+    "Revert": "Revert",
     "Revert Local Changes": "Tilbakestill lokale endringer",
     "Save": "Lagre",
     "Scan Time Remaining": "Gjenstående tid for gjennomsøking",
@@ -392,6 +397,7 @@
     "Uptime": "Oppetid",
     "Usage reporting is always enabled for candidate releases.": "Bruksrapportering er alltid påslått for utgivelseskandidater",
     "Use HTTPS for GUI": "Bruk HTTPS for GUI",
+    "Use notifications from the filesystem to detect changed items.": "Bruk varslinger fra filsystemet for å oppdage endrede elementer.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Versjon",
     "Versions": "Versjoner",

gui/default/assets/lang/lang-nl.json

@@ -94,9 +94,9 @@
     "Discovered": "Gedetecteerd",
     "Discovery": "Netwerkdetectie",
     "Discovery Failures": "Detectiefouten",
+    "Discovery Status": "Detectiestatus",
     "Dismiss": "Verwerpen",
     "Do not add it to the ignore list, so this notification may recur.": "Niet toevoegen aan de negeerlijst zodat deze melding kan terugkomen.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Niet toevoegen aan de negeerlijst zodat deze melding kan terugkomen.",
     "Do not restore": "Niet herstellen",
     "Do not restore all": "Niet alles herstellen",
     "Do you want to enable watching for changes for all your folders?": "Wilt u het opvolgen van wijzigingen voor al uw mappen inschakelen?",
@@ -122,6 +122,7 @@
     "Error": "Fout",
     "External File Versioning": "Extern versiebeheer",
     "Failed Items": "Mislukte items",
+    "Failed to load ignore patterns.": "Laden van negeerpatronen mislukt.",
     "Failed to setup, retrying": "Instellen mislukt, opnieuw proberen",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Als er geen IPv6-connectiviteit is worden problemen bij verbinden met IPv6-servers verwacht.",
     "File Pull Order": "Volgorde voor binnenhalen van bestanden",
@@ -179,6 +180,8 @@
     "Latest Change": "Laatste wijziging",
     "Learn more": "Lees meer",
     "Limit": "Begrenzing",
+    "Listener Failures": "Luisteraarfouten",
+    "Listener Status": "Luisteraarstatus",
     "Listeners": "Luisteraars",
     "Loading data...": "Gegevens laden...",
     "Loading...": "Laden...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Niet gesynchroniseerd",
     "Out of Sync Items": "Niet-gesynchroniseerde items",
     "Outgoing Rate Limit (KiB/s)": "Begrenzing uploadsnelheid (KiB/s)",
+    "Override": "Overschrijven",
     "Override Changes": "Wijzigingen overschrijven",
     "Path": "Pad",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pad naar de map op de lokale computer. Zal aangemaakt worden als het niet bestaat. De tilde (~) kan gebruikt worden als snelkoppeling voor",
@@ -266,6 +270,7 @@
     "Resume": "Hervatten",
     "Resume All": "Alles hervatten",
     "Reused": "Opnieuw gebruikt",
+    "Revert": "Terugdraaien",
     "Revert Local Changes": "Lokale wijzigingen terugdraaien",
     "Save": "Opslaan",
     "Scan Time Remaining": "Resterende scantijd",
@@ -392,6 +397,7 @@
     "Uptime": "Bedrijfstijd",
     "Usage reporting is always enabled for candidate releases.": "Gebruiksrapportering is altijd ingeschakeld voor de kandidaat-releases.",
     "Use HTTPS for GUI": "HTTPS gebruiken voor GUI",
+    "Use notifications from the filesystem to detect changed items.": "Meldingen van het bestandssysteem gebruiken om gewijzigde items te detecteren.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Gebruikersnaam/wachtwoord is niet ingesteld voor de GUI-authenticatie. Overweeg om het in te stellen.",
     "Version": "Versie",
     "Versions": "Versies",

gui/default/assets/lang/lang-pl.json

@@ -94,9 +94,9 @@
     "Discovered": "Odnaleziony",
     "Discovery": "Odnajdywanie",
     "Discovery Failures": "Błędy odnajdywania",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Odrzuć",
     "Do not add it to the ignore list, so this notification may recur.": "Nie dodaje do listy ignorowanych, więc powiadomienie to może się powtórzyć.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Nie dodaje do listy ignorowanych, więc powiadomienie to może się powtórzyć.",
     "Do not restore": "Nie przywracaj",
     "Do not restore all": "Nie przywracaj wszystkich",
     "Do you want to enable watching for changes for all your folders?": "Czy chcesz włączyć obserwowanie zmian we wszystkich folderach?",
@@ -122,6 +122,7 @@
     "Error": "Błąd",
     "External File Versioning": "Zewnętrzne wersjonowanie plików",
     "Failed Items": "Elementy zakończone niepowodzeniem",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Nie udało się ustawić, ponawiam",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Błąd połączenia do serwerów IPv6 może wystąpić, gdy w ogóle nie ma połączenia po IPv6.",
     "File Pull Order": "Kolejność pobierania plików",
@@ -179,6 +180,8 @@
     "Latest Change": "Ostatnia zmiana",
     "Learn more": "Dowiedz się więcej",
     "Limit": "Ograniczenie",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Nasłuchujący",
     "Loading data...": "Ładowanie danych...",
     "Loading...": "Ładowanie...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Niezsynchronizowane",
     "Out of Sync Items": "Elementy niezsynchronizowane",
     "Outgoing Rate Limit (KiB/s)": "Ograniczenie prędkości wysyłania (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Nadpisz zmiany",
     "Path": "Ścieżka",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ścieżka do folderu na komputerze lokalnym. Zostanie utworzona, jeżeli jeszcze nie istnieje. Znak tyldy (~) może zostać użyty jako skrót do",
@@ -266,6 +270,7 @@
     "Resume": "Wznów",
     "Resume All": "Wznów wszystkie",
     "Reused": "Ponownie użyte",
+    "Revert": "Revert",
     "Revert Local Changes": "Odrzuć zmiany lokalne",
     "Save": "Zapisz",
     "Scan Time Remaining": "Pozostały czas skanowania",
@@ -392,6 +397,7 @@
     "Uptime": "Czas działania",
     "Usage reporting is always enabled for candidate releases.": "Statystyki użycia są zawsze włączone dla wydań kandydujących.",
     "Use HTTPS for GUI": "Użyj HTTPS dla GUI",
+    "Use notifications from the filesystem to detect changed items.": "Używaj mechanizmów systemu plików do wykrywania zmienionych elementów.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Użytkownik i hasło do uwierzytelniania GUI nie zostały skonfigurowane. Zastanów się nad ich ustawieniem.",
     "Version": "Wersja",
     "Versions": "Wersje",

gui/default/assets/lang/lang-pt-BR.json

@@ -94,9 +94,9 @@
     "Discovered": "Descoberto",
     "Discovery": "Descoberta",
     "Discovery Failures": "Falhas na descoberta",
+    "Discovery Status": "Status da Descoberta",
     "Dismiss": "Descartar",
     "Do not add it to the ignore list, so this notification may recur.": "Não o adicione à lista de ignorados, portanto, esta notificação pode ocorrer novamente.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Não o adicione à lista de ignorados, portanto, esta notificação pode ocorrer novamente.",
     "Do not restore": "Não restaurar",
     "Do not restore all": "Não restaurar nenhum",
     "Do you want to enable watching for changes for all your folders?": "Você deseja ativar a observação de alterações em todas as suas pastas?",
@@ -122,6 +122,7 @@
     "Error": "Erro",
     "External File Versioning": "Externo",
     "Failed Items": "Itens com falha",
+    "Failed to load ignore patterns.": "Falha ao carregar os padrões para ignorar.",
     "Failed to setup, retrying": "Não foi possível configurar, tentando novamente",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Falhas na conexão a servidores IPv6 são esperadas caso não haja conectividade IPv6.",
     "File Pull Order": "Ordem de retirada do arquivo",
@@ -179,6 +180,8 @@
     "Latest Change": "Última mudança",
     "Learn more": "Saiba mais",
     "Limit": "Limite",
+    "Listener Failures": "Falhas de Escuta",
+    "Listener Status": "Status da Escuta",
     "Listeners": "Escutadores",
     "Loading data...": "Carregando dados...",
     "Loading...": "Carregando",
@@ -217,6 +220,7 @@
     "Out of Sync": "Fora de sincronia",
     "Out of Sync Items": "Fora de sincronia",
     "Outgoing Rate Limit (KiB/s)": "Limite de velocidade de envio (KiB/s)",
+    "Override": "Substituir",
     "Override Changes": "Sobrescrever alterações",
     "Path": "Caminho",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta na máquina local. Será criado caso não exista. O caractere til (~) pode ser usado como um atalho para",
@@ -266,6 +270,7 @@
     "Resume": "Resumir",
     "Resume All": "Resumir Todas",
     "Reused": "Reutilizado",
+    "Revert": "Reverter",
     "Revert Local Changes": "Reverter mudanças locais",
     "Save": "Salvar",
     "Scan Time Remaining": "Tempo de verificação restante",
@@ -392,6 +397,7 @@
     "Uptime": "Tempo ligado",
     "Usage reporting is always enabled for candidate releases.": "O relatório de uso está sempre habilitado em versões candidatas ao lançamento",
     "Use HTTPS for GUI": "Usar HTTPS para a interface web",
+    "Use notifications from the filesystem to detect changed items.": "Usar notificações do sistema de ficheiros para detectar itens alterados.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "O Usuário/Senha não foi definido para a autenticação da GUI. Por favor, considere defini-los.",
     "Version": "Versão",
     "Versions": "Versões",

gui/default/assets/lang/lang-pt-PT.json

@@ -94,9 +94,9 @@
     "Discovered": "Descoberto",
     "Discovery": "Pesquisa",
     "Discovery Failures": "Falhas da pesquisa",
+    "Discovery Status": "Estado da pesquisa",
     "Dismiss": "Descartar",
     "Do not add it to the ignore list, so this notification may recur.": "Não adicionar à lista dos ignorados, para que esta notificação volte a aparecer.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Não adicionar à lista dos ignorados, para que esta notificação volte a aparecer.",
     "Do not restore": "Não restaurar",
     "Do not restore all": "Não restaurar nenhum",
     "Do you want to enable watching for changes for all your folders?": "Quer activar a vigilância de alterações para todas as suas pastas?",
@@ -122,6 +122,7 @@
     "Error": "Erro",
     "External File Versioning": "Externa",
     "Failed Items": "Itens que falharam",
+    "Failed to load ignore patterns.": "Falhou o carregamento dos padrões de exclusão.",
     "Failed to setup, retrying": "A preparação falhou, tentando novamente",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "São esperadas falhas na ligação a servidores IPv6 se não existir conectividade IPv6.",
     "File Pull Order": "Ordem de obtenção de ficheiros",
@@ -179,6 +180,8 @@
     "Latest Change": "Última alteração",
     "Learn more": "Saiba mais",
     "Limit": "Limite",
+    "Listener Failures": "Falhas de auscultação",
+    "Listener Status": "Estado da auscultação",
     "Listeners": "Auscultadores",
     "Loading data...": "Carregando dados...",
     "Loading...": "Carregando...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Fora de sincronia",
     "Out of Sync Items": "Itens por sincronizar",
     "Outgoing Rate Limit (KiB/s)": "Limite da velocidade de envio (KiB/s)",
+    "Override": "Sobrepor",
     "Override Changes": "Sobrepor alterações",
     "Path": "Caminho",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Caminho para a pasta no computador local. Será criada, caso não exista. O til (~) pode ser utilizado como atalho para",
@@ -266,6 +270,7 @@
     "Resume": "Retomar",
     "Resume All": "Retomar todas",
     "Reused": "Reutilizado",
+    "Revert": "Reverter",
     "Revert Local Changes": "Reverter alterações locais",
     "Save": "Gravar",
     "Scan Time Remaining": "Tempo restante da verificação",
@@ -392,6 +397,7 @@
     "Uptime": "Tempo em actividade",
     "Usage reporting is always enabled for candidate releases.": "O relatório de utilização está sempre activado nas versões candidatas a lançamento.",
     "Use HTTPS for GUI": "Utilizar HTTPS na interface gráfica",
+    "Use notifications from the filesystem to detect changed items.": "Usar notificações do sistema de ficheiros para detectar itens alterados.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "O nome de utilizador e a respectiva senha para a autenticação na interface gráfica não foram definidos. Considere efectuar essa configuração.",
     "Version": "Versão",
     "Versions": "Versões",

gui/default/assets/lang/lang-ro-RO.json

@@ -94,9 +94,9 @@
     "Discovered": "Discovered",
     "Discovery": "Discovery",
     "Discovery Failures": "Discovery Failures",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Do not restore",
     "Do not restore all": "Do not restore all",
     "Do you want to enable watching for changes for all your folders?": "Do you want to enable watching for changes for all your folders?",
@@ -122,6 +122,7 @@
     "Error": "Eroare",
     "External File Versioning": "Administrare externă a versiunilor documentului",
     "Failed Items": "Failed Items",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Failed to setup, retrying",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
     "File Pull Order": "File Pull Order",
@@ -179,6 +180,8 @@
     "Latest Change": "Latest Change",
     "Learn more": "Learn more",
     "Limit": "Limit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Listeners",
     "Loading data...": "Loading data...",
     "Loading...": "Loading...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Out of Sync",
     "Out of Sync Items": "Elemente Nesincronizate",
     "Outgoing Rate Limit (KiB/s)": "Limită Viteză de Upload (KB/s)",
+    "Override": "Override",
     "Override Changes": "Suprascrie Schimbări",
     "Path": "Path",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Localizarea fișierului în acest computer. Dacă nu există, va fi creat. Tilda (~) înlocuiește ",
@@ -266,6 +270,7 @@
     "Resume": "Resume",
     "Resume All": "Resume All",
     "Reused": "Refolosit",
+    "Revert": "Revert",
     "Revert Local Changes": "Revert Local Changes",
     "Save": "Salvează",
     "Scan Time Remaining": "Scan Time Remaining",
@@ -392,6 +397,7 @@
     "Uptime": "Uptime",
     "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
     "Use HTTPS for GUI": "Foloseşte HTTPS pentru interfaţă",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Versiune",
     "Versions": "Versions",

gui/default/assets/lang/lang-ru.json

@@ -94,9 +94,9 @@
     "Discovered": "Обнаружено",
     "Discovery": "Обнаружение",
     "Discovery Failures": "Ошибки обнаружения",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Не восстанавливать",
     "Do not restore all": "Не восстанавливать все",
     "Do you want to enable watching for changes for all your folders?": "Хотите включить слежение за изменениями для всех своих папок?",
@@ -122,6 +122,7 @@
     "Error": "Ошибка",
     "External File Versioning": "Внешний контроль версий файлов",
     "Failed Items": "Сбои",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Не удалось настроить, пробуем ещё",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Если нет IPv6-соединений, при подключении к IPv6-серверам произойдёт ошибка.",
     "File Pull Order": "Порядок получения файлов",
@@ -179,6 +180,8 @@
     "Latest Change": "Последнее изменение",
     "Learn more": "Узнать больше",
     "Limit": "Ограничение",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Прослушиватель",
     "Loading data...": "Загрузка данных...",
     "Loading...": "Загрузка...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Нет синхронизации",
     "Out of Sync Items": "Несинхронизированные элементы",
     "Outgoing Rate Limit (KiB/s)": "Ограничение исходящей скорости (КиБ/с)",
+    "Override": "Override",
     "Override Changes": "Перезаписать изменения",
     "Path": "Путь",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Путь к папке на локальном компьютере. Если её не существует, то она будет создана. Тильда (~) может использоваться как сокращение для",
@@ -266,6 +270,7 @@
     "Resume": "Возобновить",
     "Resume All": "Возобновить все",
     "Reused": "Повторно использовано",
+    "Revert": "Revert",
     "Revert Local Changes": "Отменить изменения на этом компьютере",
     "Save": "Сохранить",
     "Scan Time Remaining": "Оставшееся время сканирования",
@@ -392,6 +397,7 @@
     "Uptime": "Время работы",
     "Usage reporting is always enabled for candidate releases.": "Отправка отчётов об использовании всегда включена для кандидатов в релизы.",
     "Use HTTPS for GUI": "Использовать HTTPS для панели управления",
+    "Use notifications from the filesystem to detect changed items.": "Использовать уведомления от файловой системы для обнаружения изменённых объектов.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Имя пользователя/пароль не был установлен для GUI-аутентификации. Настройте его.",
     "Version": "Версия",
     "Versions": "Версии",

gui/default/assets/lang/lang-sk.json

@@ -94,9 +94,9 @@
     "Discovered": "Zistené",
     "Discovery": "Zisťovanie",
     "Discovery Failures": "Zlyhania zisťovania",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Neobnovovať",
     "Do not restore all": "Neobnovovať všetko",
     "Do you want to enable watching for changes for all your folders?": "Chcete zapnúť sledovanie zmien vo všetkých priečinkoch?",
@@ -122,6 +122,7 @@
     "Error": "Chyba",
     "External File Versioning": "Externé spracovanie verzií súborov",
     "Failed Items": "Zlyhané položky",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Nepodarilo sa nastaviť, opakujem.",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Zlyhanie pripojenia k IPv6 serverom je očakávané ak neexistujú žiadne IPv6 pripojenia.",
     "File Pull Order": "Poradie sťahovania súborov",
@@ -179,6 +180,8 @@
     "Latest Change": "Posledná zmena",
     "Learn more": "Zisti viac",
     "Limit": "Limit",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Načúvajúci",
     "Loading data...": "Načítavanie údajov...",
     "Loading...": "Načítavanie...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Nesynchronizované",
     "Out of Sync Items": "Nezosynchronizované položky",
     "Outgoing Rate Limit (KiB/s)": "Obmedzenie odchádzajúcej rýchlosti (KiB/s)",
+    "Override": "Override",
     "Override Changes": "Prepísať zmeny",
     "Path": "Cesta",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Cesta k adresáru na lokálnom počítači. Ak neexistuje, bude vytvorená. Znak vlnovky (~) môže byť použitý ako skratka pre",
@@ -266,6 +270,7 @@
     "Resume": "Pokračovať",
     "Resume All": "Pokračuj so všetkými",
     "Reused": "Opakovane použité",
+    "Revert": "Revert",
     "Revert Local Changes": "Vrátiť lokálne zmeny",
     "Save": "Uložiť",
     "Scan Time Remaining": "Zostávajúci čas skenovania",
@@ -392,6 +397,7 @@
     "Uptime": "Doba prevádzky",
     "Usage reporting is always enabled for candidate releases.": "Hlásenia o používaní sú pri kandidátoch na vydanie vždy povolené.",
     "Use HTTPS for GUI": "Použiť HTTPS pre grafické rozhranie",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Username/Password has not been set for the GUI authentication. Please consider setting it up.",
     "Version": "Verzia",
     "Versions": "Verzie",

gui/default/assets/lang/lang-sv.json

@@ -44,7 +44,7 @@
     "Clean out after": "Rensa efteråt",
     "Cleaning Versions": "Rensningsversioner",
     "Cleanup Interval": "Rensningsintervall",
-    "Click to see discovery failures": "Klicka för att se upptäcktsmisslyckanden",
+    "Click to see discovery failures": "Klicka för att se annonseringsmisslyckanden",
     "Click to see full identification string and QR code.": "Klicka för att se fullständig identifieringssträng och QR-kod.",
     "Close": "Stäng",
     "Command": "Kommando",
@@ -94,9 +94,9 @@
     "Discovered": "Upptäckt",
     "Discovery": "Annonsering",
     "Discovery Failures": "Annonseringsmisslyckanden",
+    "Discovery Status": "Annonseringsstatus",
     "Dismiss": "Avfärda",
     "Do not add it to the ignore list, so this notification may recur.": "Lägg inte till den i ignoreringslistan, så denna avisering kan återkomma.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Lägg inte till den i ignoreringslistan, så denna avisering kan återkomma.",
     "Do not restore": "Återställ inte",
     "Do not restore all": "Återställ inte allt",
     "Do you want to enable watching for changes for all your folders?": "Vill du aktivera bevakning av ändringar på alla dina mappar?",
@@ -122,6 +122,7 @@
     "Error": "Fel",
     "External File Versioning": "Extern filversionshantering",
     "Failed Items": "Misslyckade objekt",
+    "Failed to load ignore patterns.": "Det gick inte att läsa in ignorera mönster.",
     "Failed to setup, retrying": "Det gick inte att ställa in, försöker igen",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Det går inte att ansluta till IPv6-servrar om det inte finns någon IPv6-anslutning.",
     "File Pull Order": "Filhämtningsprioritering",
@@ -179,6 +180,8 @@
     "Latest Change": "Senaste ändring",
     "Learn more": "Läs mer",
     "Limit": "Gräns",
+    "Listener Failures": "Lyssnarfel",
+    "Listener Status": "Lyssnarstatus",
     "Listeners": "Lyssnare",
     "Loading data...": "Läser in data...",
     "Loading...": "Läser in...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Osynkroniserad",
     "Out of Sync Items": "Osynkroniserade objekt",
     "Outgoing Rate Limit (KiB/s)": "Utgående hastighetsgräns (KiB/s)",
+    "Override": "Åsidosätt",
     "Override Changes": "Åsidosätt förändringar",
     "Path": "Sökväg",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sökväg till mappen på din dator. Kommer att skapas om det inte finns. Tecknet tilde (~) kan användas som en genväg för",
@@ -266,6 +270,7 @@
     "Resume": "Återuppta",
     "Resume All": "Återuppta alla",
     "Reused": "Återanvänds",
+    "Revert": "Återgå",
     "Revert Local Changes": "Återställ lokala ändringar",
     "Save": "Spara",
     "Scan Time Remaining": "Återstående skanningstid",
@@ -290,7 +295,7 @@
     "Sharing": "Delning",
     "Show ID": "Visa ID",
     "Show QR": "Visa QR",
-    "Show detailed discovery status": "Visa detaljerad upptäcktsstatus",
+    "Show detailed discovery status": "Visa detaljerad annonseringsstatus",
     "Show detailed listener status": "Visa detaljerad lyssnarstatus",
     "Show diff with previous version": "Visa skillnad med tidigare version",
     "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Visas istället för enhets-ID i klusterstatus. Kommer att annonseras på andra enheter som ett valfritt standardnamn.",
@@ -301,7 +306,7 @@
     "Single level wildcard (matches within a directory only)": "Jokertecken som representerar noll eller fler godtyckliga tecken i ett filnamn.",
     "Size": "Storlek",
     "Smallest First": "Minsta först",
-    "Some discovery methods could not be established for finding other devices or announcing this device:": "Vissa upptäcktsmetoder kunde inte fastställas för att hitta andra enheter eller tillkännage denna enhet:",
+    "Some discovery methods could not be established for finding other devices or announcing this device:": "Vissa annonseringsmetoder kunde inte fastställas för att hitta andra enheter eller tillkännage denna enhet:",
     "Some items could not be restored:": "Vissa objekt kunde inte återställas:",
     "Some listening addresses could not be enabled to accept connections:": "Vissa lyssningsadresser kunde inte aktiveras för att acceptera anslutningar:",
     "Source Code": "Källkod",
@@ -392,6 +397,7 @@
     "Uptime": "Drifttid",
     "Usage reporting is always enabled for candidate releases.": "Användningsrapportering är alltid aktiverad för kandidatutgåvor.",
     "Use HTTPS for GUI": "Använd HTTPS för gränssnitt",
+    "Use notifications from the filesystem to detect changed items.": "Använd aviseringar från filsystemet för att upptäcka ändrade objekt.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Användarnamn/lösenord har inte ställts in för autentisering av det grafiska gränssnittet. Vänligen överväg att ställa in det.",
     "Version": "Version",
     "Versions": "Versioner",

gui/default/assets/lang/lang-tr.json

@@ -94,9 +94,9 @@
     "Discovered": "Keşfedildi",
     "Discovery": "Keşif",
     "Discovery Failures": "Keşif Hataları",
+    "Discovery Status": "Keşif Durumu",
     "Dismiss": "Yoksay",
     "Do not add it to the ignore list, so this notification may recur.": "Yoksayma listesine eklemeyin, böylece bu bildirim tekrarlayabilir.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Yoksayma listesine eklemeyin, böylece bu bildirim tekrarlayabilir.",
     "Do not restore": "Geri yükleme yapma",
     "Do not restore all": "Hiçbirini geri yükleme",
     "Do you want to enable watching for changes for all your folders?": "Tüm klasörleriniz için değişiklikleri izlemeyi etkinleştirmek istiyor musunuz?",
@@ -122,6 +122,7 @@
     "Error": "Hata",
     "External File Versioning": "Harici Dosya Sürümlendirme",
     "Failed Items": "Başarısız Olan Öğeler",
+    "Failed to load ignore patterns.": "Yoksayma şekillerini yükleme başarısız.",
     "Failed to setup, retrying": "Ayarlama başarısız, yeniden deneniyor",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "IPv6 bağlanabilirliği yoksa IPv6 sunucularına bağlanma hatası beklenmekte.",
     "File Pull Order": "Dosya Çekme Sırası",
@@ -179,6 +180,8 @@
     "Latest Change": "Son Değişiklik",
     "Learn more": "Daha fazla bilgi edinin",
     "Limit": "Sınır",
+    "Listener Failures": "Dinleyici Hataları",
+    "Listener Status": "Dinleyici Durumu",
     "Listeners": "Dinleyiciler",
     "Loading data...": "Veriler yükleniyor...",
     "Loading...": "Yükleniyor...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Eşitlenmemiş",
     "Out of Sync Items": "Eşitlenmemiş Öğeler",
     "Outgoing Rate Limit (KiB/s)": "Giden Hız Sınırı (KiB/s)",
+    "Override": "Geçersiz kıl",
     "Override Changes": "Değişiklikleri geçersiz kıl",
     "Path": "Yol",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Yerel bilgisayardaki klasör yolu. Klasör yoksa oluşturulacaktır. Tilde karakterinin (~) kısayol olarak kullanılabileceği yol",
@@ -266,6 +270,7 @@
     "Resume": "Devam",
     "Resume All": "Tümüne Devam",
     "Reused": "Yeniden Kullanılan",
+    "Revert": "Geri al",
     "Revert Local Changes": "Yerel Değişiklikleri Geri Döndür",
     "Save": "Kaydet",
     "Scan Time Remaining": "Kalan Tarama Süresi",
@@ -392,6 +397,7 @@
     "Uptime": "Çalışma Süresi",
     "Usage reporting is always enabled for candidate releases.": "Kullanım bildirme aday yayımlar için her zaman etkinleştirilmiştir.",
     "Use HTTPS for GUI": "GKA için HTTPS kullan",
+    "Use notifications from the filesystem to detect changed items.": "Değişen öğeleri tespit etmek için dosya sistemi bildirimleri kullanın.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Kullanıcı adı/Parola, GKA kimlik doğrulaması için ayarlanmadı. Lütfen ayarlamayı düşünün.",
     "Version": "Sürüm",
     "Versions": "Sürümler",

gui/default/assets/lang/lang-uk.json

@@ -94,9 +94,9 @@
     "Discovered": "Виявлено",
     "Discovery": "Сервери координації NAT",
     "Discovery Failures": "Помилки виявлення",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "Не відновлювати",
     "Do not restore all": "Не відновлювати все",
     "Do you want to enable watching for changes for all your folders?": "Бажаєте увімкнути стеження за змінами у всіх ваших папках?",
@@ -122,6 +122,7 @@
     "Error": "Помилка",
     "External File Versioning": "Зовнішне керування версіями",
     "Failed Items": "Невдалі",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "Помилка при налаштуванні, повторюємо",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "За відсутності IPv6-з'єднання очікується неможливість підключення до IPv6-серверів.",
     "File Pull Order": "Порядок витягнення файлів",
@@ -179,6 +180,8 @@
     "Latest Change": "Найостанніша зміна",
     "Learn more": "Дізнатися більше",
     "Limit": "Ліміт",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "Приймачі (TCP & Relay)",
     "Loading data...": "Дані завантажуються...",
     "Loading...": "Завантаження...",
@@ -217,6 +220,7 @@
     "Out of Sync": "Не синхронізовано",
     "Out of Sync Items": "Не синхронізовані елементи",
     "Outgoing Rate Limit (KiB/s)": "Ліміт швидкості віддачі (КіБ/с)",
+    "Override": "Override",
     "Override Changes": "Розіслати мою версію",
     "Path": "Шлях",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Шлях до директорії на локальному комп’ютері. Буде створений, якщо такий не існує. Символ тильди (~) може бути використаний як ярлик для",
@@ -266,6 +270,7 @@
     "Resume": "Продовжити",
     "Resume All": "Продовжити всі",
     "Reused": "Використано вдруге",
+    "Revert": "Revert",
     "Revert Local Changes": "Інвертувати локальні зміни",
     "Save": "Зберегти",
     "Scan Time Remaining": "Час до кінця сканування",
@@ -392,6 +397,7 @@
     "Uptime": "Тривалість роботи",
     "Usage reporting is always enabled for candidate releases.": "Звіти про користування завжди увімкнені для реліз-кандидатів.",
     "Use HTTPS for GUI": "Використовувати HTTPS для доступу до панелі управління",
+    "Use notifications from the filesystem to detect changed items.": "Використовувати сповіщення від файлової системи для виявлення змінених об'єктів.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "Логін/пароль не встановлений для GUI автенфікації. Будь-ласка налаштуйте її.",
     "Version": "Версія",
     "Versions": "Версії",

gui/default/assets/lang/lang-zh-CN.json

@@ -94,9 +94,9 @@
     "Discovered": "已发现",
     "Discovery": "设备发现",
     "Discovery Failures": "设备发现错误",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "解散",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "不将其添加到忽略列表中，该通知可能会重复出现。",
     "Do not restore": "不要恢复",
     "Do not restore all": "不要全部恢复",
     "Do you want to enable watching for changes for all your folders?": "您想要启用对监视您所有文件夹的更改吗？",
@@ -122,6 +122,7 @@
     "Error": "错误",
     "External File Versioning": "外部版本控制",
     "Failed Items": "失败的项目",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "设置失败，正在重试。",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "如果本机没有配置IPv6，则无法连接IPv6服务器是正常的。",
     "File Pull Order": "文件拉取顺序",
@@ -179,6 +180,8 @@
     "Latest Change": "最后更改",
     "Learn more": "了解更多",
     "Limit": "限制",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "侦听程序",
     "Loading data...": "正在载入数据…",
     "Loading...": "正在载入…",
@@ -217,6 +220,7 @@
     "Out of Sync": "未同步",
     "Out of Sync Items": "未同步的项目",
     "Outgoing Rate Limit (KiB/s)": "上传速度限制 (KiB/s)",
+    "Override": "Override",
     "Override Changes": "撤销改变",
     "Path": "路径",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "文件夹在本地的路径。如果不存在，则会被创建。波浪线符号（~）是如下路径的缩略符：",
@@ -266,6 +270,7 @@
     "Resume": "恢复",
     "Resume All": "全部恢复",
     "Reused": "复用",
+    "Revert": "Revert",
     "Revert Local Changes": "恢复本地更改",
     "Save": "保存",
     "Scan Time Remaining": "扫描剩余时间",
@@ -392,6 +397,7 @@
     "Uptime": "已启动",
     "Usage reporting is always enabled for candidate releases.": "发布候选版总是会启用使用报告。",
     "Use HTTPS for GUI": "使用加密连接到图形管理页面",
+    "Use notifications from the filesystem to detect changed items.": "使用文件系统的通知来检测更改的项目。",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "尚未为GUI身份验证设置用户名/密码。 请考虑进行设置。",
     "Version": "版本",
     "Versions": "历史版本",

gui/default/assets/lang/lang-zh-HK.json

@@ -94,9 +94,9 @@
     "Discovered": "已發現",
     "Discovery": "設備發現",
     "Discovery Failures": "設備發現錯誤",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "不要恢復",
     "Do not restore all": "不要全部恢復",
     "Do you want to enable watching for changes for all your folders?": "您想要啟用對監視您所有文件夾的更改嗎？",
@@ -122,6 +122,7 @@
     "Error": "錯誤",
     "External File Versioning": "外部版本控制",
     "Failed Items": "失敗的項目",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "設置失敗，正在重試。",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "如果本機沒有配置IPv6，則無法連接IPv6服務器是正常的。",
     "File Pull Order": "文件拉取順序",
@@ -179,6 +180,8 @@
     "Latest Change": "最後更改",
     "Learn more": "瞭解更多",
     "Limit": "限制",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "偵聽程序",
     "Loading data...": "正在載入數據…",
     "Loading...": "正在載入…",
@@ -217,6 +220,7 @@
     "Out of Sync": "未同步",
     "Out of Sync Items": "未同步的項目",
     "Outgoing Rate Limit (KiB/s)": "上傳速度限制 (KiB/s)",
+    "Override": "Override",
     "Override Changes": "撤銷改變",
     "Path": "路徑",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "文件夾在本地的路徑。如果不存在，則會被創建。波浪線符號（~）是如下路徑的縮略符：",
@@ -266,6 +270,7 @@
     "Resume": "恢復",
     "Resume All": "全部恢復",
     "Reused": "復用",
+    "Revert": "Revert",
     "Revert Local Changes": "恢復本地更改",
     "Save": "保存",
     "Scan Time Remaining": "掃瞄剩餘時間",
@@ -392,6 +397,7 @@
     "Uptime": "已啟動",
     "Usage reporting is always enabled for candidate releases.": "發佈候選版總是會啟用使用報告。",
     "Use HTTPS for GUI": "使用加密連接到圖形管理頁面",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "尚未為GUI身份驗證設置用戶名/密碼。 請考慮進行設置。",
     "Version": "版本",
     "Versions": "歷史版本",

gui/default/assets/lang/lang-zh-TW.json

@@ -94,9 +94,9 @@
     "Discovered": "已發現",
     "Discovery": "探索",
     "Discovery Failures": "探索失敗",
+    "Discovery Status": "Discovery Status",
     "Dismiss": "Dismiss",
     "Do not add it to the ignore list, so this notification may recur.": "Do not add it to the ignore list, so this notification may recur.",
-    "Do not add it to the ignore list, so this notification may recurr.": "Do not add it to the ignore list, so this notification may recurr.",
     "Do not restore": "不要還原",
     "Do not restore all": "不要還原全部",
     "Do you want to enable watching for changes for all your folders?": "您要對全部的資料夾啟用變動監視嗎？",
@@ -122,6 +122,7 @@
     "Error": "錯誤",
     "External File Versioning": "外部的檔案版本控制",
     "Failed Items": "失敗的項目",
+    "Failed to load ignore patterns.": "Failed to load ignore patterns.",
     "Failed to setup, retrying": "無法設定，正在重試",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "若沒有 IPv6 連線能力，則無法連接 IPv6 伺服器為正常現象。",
     "File Pull Order": "提取檔案的順序",
@@ -179,6 +180,8 @@
     "Latest Change": "最近變動",
     "Learn more": "瞭解更多",
     "Limit": "限制",
+    "Listener Failures": "Listener Failures",
+    "Listener Status": "Listener Status",
     "Listeners": "監聽者",
     "Loading data...": "正在載入資料...",
     "Loading...": "正在載入...",
@@ -217,6 +220,7 @@
     "Out of Sync": "未同步",
     "Out of Sync Items": "未同步項目",
     "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
+    "Override": "Override",
     "Override Changes": "覆蓋變動",
     "Path": "路徑",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "資料夾在本機的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑：",
@@ -266,6 +270,7 @@
     "Resume": "繼續",
     "Resume All": "全部繼續",
     "Reused": "重用",
+    "Revert": "Revert",
     "Revert Local Changes": "撤銷本機變更",
     "Save": "儲存",
     "Scan Time Remaining": "剩餘掃描時間",
@@ -392,6 +397,7 @@
     "Uptime": "上線時間",
     "Usage reporting is always enabled for candidate releases.": "候選發行版永遠啟用使用數據回報。",
     "Use HTTPS for GUI": "為 GUI 使用 HTTPS",
+    "Use notifications from the filesystem to detect changed items.": "Use notifications from the filesystem to detect changed items.",
     "Username/Password has not been set for the GUI authentication. Please consider setting it up.": "尚未設定GUI 驗證的使用者名稱/密碼。請考慮進行設定。",
     "Version": "版本",
     "Versions": "版本",