syncthing/lib/beacon/multicast.go

229 lines
4.1 KiB
Go
Raw Normal View History

2014-11-16 13:13:20 -07:00
// Copyright (C) 2014 The Syncthing Authors.
2014-09-29 12:43:32 -07:00
//
2015-03-07 13:36:35 -07:00
// This Source Code Form is subject to the terms of the Mozilla Public
// License, v. 2.0. If a copy of the MPL was not distributed with this file,
// You can obtain one at http://mozilla.org/MPL/2.0/.
package beacon
import (
"errors"
"fmt"
"net"
"time"
"github.com/thejerf/suture"
"golang.org/x/net/ipv6"
)
type Multicast struct {
*suture.Supervisor
addr *net.UDPAddr
inbox chan []byte
outbox chan recv
mr *multicastReader
mw *multicastWriter
}
func NewMulticast(addr string) *Multicast {
m := &Multicast{
Supervisor: suture.New("multicastBeacon", suture.Spec{
// Don't retry too frenetically: an error to open a socket or
// whatever is usually something that is either permanent or takes
// a while to get solved...
FailureThreshold: 2,
FailureBackoff: 60 * time.Second,
// Only log restarts in debug mode.
Log: func(line string) {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(line)
},
}),
inbox: make(chan []byte),
outbox: make(chan recv, 16),
}
m.mr = &multicastReader{
addr: addr,
outbox: m.outbox,
stop: make(chan struct{}),
}
m.Add(m.mr)
m.mw = &multicastWriter{
addr: addr,
inbox: m.inbox,
stop: make(chan struct{}),
}
m.Add(m.mw)
return m
}
func (m *Multicast) Send(data []byte) {
m.inbox <- data
}
func (m *Multicast) Recv() ([]byte, net.Addr) {
recv := <-m.outbox
return recv.data, recv.src
}
func (m *Multicast) Error() error {
if err := m.mr.Error(); err != nil {
return err
}
return m.mw.Error()
}
type multicastWriter struct {
addr string
inbox <-chan []byte
errorHolder
stop chan struct{}
}
func (w *multicastWriter) Serve() {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(w, "starting")
defer l.Debugln(w, "stopping")
gaddr, err := net.ResolveUDPAddr("udp6", w.addr)
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
w.setError(err)
return
}
conn, err := net.ListenPacket("udp6", ":0")
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
w.setError(err)
return
}
pconn := ipv6.NewPacketConn(conn)
wcm := &ipv6.ControlMessage{
HopLimit: 1,
}
for bs := range w.inbox {
intfs, err := net.Interfaces()
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
w.setError(err)
return
}
success := 0
for _, intf := range intfs {
wcm.IfIndex = intf.Index
pconn.SetWriteDeadline(time.Now().Add(time.Second))
_, err = pconn.WriteTo(bs, wcm, gaddr)
pconn.SetWriteDeadline(time.Time{})
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err, "on write to", gaddr, intf.Name)
w.setError(err)
continue
}
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugf("sent %d bytes to %v on %s", len(bs), gaddr, intf.Name)
success++
}
if success > 0 {
w.setError(nil)
} else {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
w.setError(err)
}
}
}
func (w *multicastWriter) Stop() {
close(w.stop)
}
func (w *multicastWriter) String() string {
return fmt.Sprintf("multicastWriter@%p", w)
}
type multicastReader struct {
addr string
outbox chan<- recv
errorHolder
stop chan struct{}
}
func (r *multicastReader) Serve() {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(r, "starting")
defer l.Debugln(r, "stopping")
gaddr, err := net.ResolveUDPAddr("udp6", r.addr)
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
r.setError(err)
return
}
conn, err := net.ListenPacket("udp6", r.addr)
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
r.setError(err)
return
}
intfs, err := net.Interfaces()
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
r.setError(err)
return
}
pconn := ipv6.NewPacketConn(conn)
joined := 0
for _, intf := range intfs {
err := pconn.JoinGroup(&intf, &net.UDPAddr{IP: gaddr.IP})
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
if err != nil {
l.Debugln("IPv6 join", intf.Name, "failed:", err)
} else {
l.Debugln("IPv6 join", intf.Name, "success")
}
joined++
}
if joined == 0 {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln("no multicast interfaces available")
r.setError(errors.New("no multicast interfaces available"))
return
}
bs := make([]byte, 65536)
for {
n, _, addr, err := pconn.ReadFrom(bs)
if err != nil {
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln(err)
r.setError(err)
continue
}
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugf("recv %d bytes from %s", n, addr)
c := make([]byte, n)
copy(c, bs)
select {
case r.outbox <- recv{c, addr}:
default:
Implement facility based logger, debugging via REST API This implements a new debug/trace infrastructure based on a slightly hacked up logger. Instead of the traditional "if debug { ... }" I've rewritten the logger to have no-op Debugln and Debugf, unless debugging has been enabled for a given "facility". The "facility" is just a string, typically a package name. This will be slightly slower than before; but not that much as it's mostly a function call that returns immediately. For the cases where it matters (the Debugln takes a hex.Dump() of something for example, and it's not in a very occasional "if err != nil" branch) there is an l.ShouldDebug(facility) that is fast enough to be used like the old "if debug". The point of all this is that we can now toggle debugging for the various packages on and off at runtime. There's a new method /rest/system/debug that can be POSTed a set of facilities to enable and disable debug for, or GET from to get a list of facilities with descriptions and their current debug status. Similarly a /rest/system/log?since=... can grab the latest log entries, up to 250 of them (hardcoded constant in main.go) plus the initial few. Not implemented in this commit (but planned) is a simple debug GUI available on /debug that shows the current log in an easily pasteable format and has checkboxes to enable the various debug facilities. The debug instructions to a user then becomes "visit this URL, check these boxes, reproduce your problem, copy and paste the log". The actual log viewer on the hypothetical /debug URL can poll regularly for new log entries and this bypass the 250 line limit. The existing STTRACE=foo variable is still obeyed and just sets the start state of the system.
2015-10-03 08:25:21 -07:00
l.Debugln("dropping message")
}
}
}
func (r *multicastReader) Stop() {
close(r.stop)
}
func (r *multicastReader) String() string {
return fmt.Sprintf("multicastReader@%p", r)
}